Akura AH260LCD 26" LCD TV Instruction Manual

Add to My manuals
19 Pages

advertisement

Akura AH260LCD 26
LCD COLOUR TV
USER'S MANUAL
Part No:
SAFETY CLASS
This is an IEC safety class I product and must be grounded for safety.
CONTENTS
Important safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Preparation for Using your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Selecting a location for the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Learning about your TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting to A / V equipments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting to an antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Preparing the remote control for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Learning about the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the TV features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Understanding the TV features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the CHANNEL menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the PICTURE menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the AUDIO SETTINGS menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the PIP menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the MENU LOCK SETTING menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the GENERAL SETTINGS menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Teletext operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Design and specifications are subject to change without notice.
The symbol of the dustbin barred means that this apparatus cannot be put at the
rebus with not sorted waste domestic running.
It is interdict to throw with not sorted waste domestic running, of deposited on the
public thoroughfare or at any other place not envisaged to this end. This apparatus
contains substances being able to be harmful for the environment.
The presence of certain substances can have harmful effects on the environment.
This apparatus profits from a specific treatment of recycling for the re-use of the matters which make it
up.
This apparatus must be thrown only to the places envisaged. Inform near your authority to know the
places of electronic collection of waste.
Your sale point must collect this apparatus against the purchase of a new one for its recycling.
The selective collection of waste electronics is to reduce the number of substance vermin not recycled
and to thus contribute to the environment.
OSD language Settings
When you start using your set for the
first time, this menu will be displayed
on the screen as shown on the right.
1.Press the [CH+ or CH-] button to
select the OSD language
2.Press the [VOL+ or VOL-] button to
select the language that you want
to use.
Notes: The menu is only displayed once when you turn on the TV.
If you want to select this menu, please follow the instructions
below:
1).Press the [Menu] button to enter
the main menu.
2).Press the [VOL+ or VOL-] button
to slect the item General
settings as shown on the right.
3).Press the [CH+ or CH-] button to
select the Plug & play and press
the [VOL+ or VOL-] button to
select this function.
4).Turn on your TV again, the menu
will be displayed on the screen.
GENERAL SETTINGS
LANGUAGE
OSD POSITION
COLOUR SYSTEM
OSD LANGUAGE
BLANK
SLEEP TIMER
TRANSPARENCY
DEINTERLACER
Plug & Play
ENGLISH
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product ' s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER(OR BACK).NO USERSERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance( servicing ) instructions in
the literature accompanying the set.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT
SAFEGUARD
FIRE AND SHOCK PRECAUTIONS
Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free
from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other
enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation
boles could become obstructed.
Do not set liquids, including flower vases and vessels filled with chemicals or water etc., On top of the
unit as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately
and call a qualified technician for removal.
When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot.
To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on
the power cord. Keep cord away from radiating appliances. Do not allow cord to become knotted or
tangled. Do not lengthen the cord. When removing the power plug from the socket, always hold onto the
plug, never pull by the cord.
This TV set shall be connected to a main socket outlet with a protective earthing contaction
The main plug and main switch should be remain readily operable after installation
No nacked flame sources,such as lighted ca dles, should be placed on the apparatus
Minimum distances around the apparatus for sufficient ventilation
The use of apparatus in moderate climates
WARNING
Do not remove the back cover of the TV set. Accidental contact with high voltage components could result
in electric shock. When internal adjustment is necessary, please contact your distributor.
If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continue
operation is dangerous. Immediately turn off power and remove the power plug from the socket and
contact your distributor.
During vacation or other occasions when you will not be using the set for an extended period, remove the
power plug from the socket.
This appliance should not be operated by children or infirm persons without adequate supervision.
-1-
Preparation for Using your new TV
Selecting a location for the TV
1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.
2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause
overheating, which may damage the TV.
NOTE: Please contact local dealer for wall mounting.
Learning about your TV
You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the
back panel provide all the connections you will need to connect other equipment to your TV.
Front Controls
MENU
TV/AV
VOL
VOL
CH
CH
13
21
16
17
DVI
VGA
15
ANT.IN
14
AerialRS-232
Back Connections
POWER INPUT
AC100-240 50/60HZ
10
11
S-VIDEO
SCART2
12
19`
P B /C B P R /C R
L
R
AUDIO
Y
18
COMPONENT
20
SCART1
Note: The above figures are for reference only, please refer to the actual units to determine their appearance.
-2-
Preparation for Using your new TV
MENU button
Source select
Volume down / cursor left
Volume up / cursor right
Channel down / cursor down
Channel up / cursor up
Remote Sensing Window
Power indicator
SCART1
Headphone output
RS232C DEBUG terminal
DVI input
POWER button (standby)
YP B P R /YC B C R input
S-Video input
SCART2
YP B P R /YC B C R /PC audio input
Wall mounting locating hole
AC Power switch
21
PC VGA input
CATV antenna input
Connecting your TV
Caution: Do not plug the TV in until you have finished connecting all of your equipment.
Connecting to A/V equipments
To enjoy its multimedia features, you can connect your TV to A/V equipments such as VCR, DVD, STB, Satellite
receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. Connect the
devices as shown below.
1
S-VIDEO
SCART2
SCART1
L
R
AUDIO
P B /C B P R /C R
Y
ANT.IN
VGA
COMPONENT
HDTV STB
VCD, DVD
1
Preset
ON
Aerial
Note: The S-Video terminal and SCART2 terminal can not be used at the same time. Otherwise, they will interfere each other.
-3-
AerialRS-232
DVI
Preparation for Using your new TV
Connecting to A Computer
You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB
interface and PC audio interface. Connect the devices as shown below.
RGB line
PC/NB
L
R
AUDIO
To speaker
Y
P B /C B P R /C R
ANT.IN
COMPONENT
VGA
AerialRS-232
DVI
To VGA
Audio line
Connecting to an antenna
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna
(not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna
must be used. The exact type and location of the antenna will depend on your particular area. Consult your
local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor
or indoor antenna is not needed. Connect the equipments as the following figure.
Plug(not supplied)
ANT 75
ANTENNA SOCKET
COAXIAL CABLE (75W )
TWIN-LEAD FEEDER(300 W )
Adaptor (not supplied)
Loosen the screw
-4-
Insert the feeder in
The signal comes from:
An outdoor antenna
An indoor antenna
CATV net
Tighten the screw
Using the remote control
Preparing the remote control for use
Installing the remote control batteries
1. Open the battery cover on the back of the remote control.
2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery
compartment.
3. Close the battery cover.
Note:
1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.
2.Do not mix battery types or combine used batteries with new ones.
3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.
4.If you do not intend to use the remote control for a long time, remove the batteries.
5.The effective range of remote control is suggested in the figure.
6m
15
8m
15
30
6m
-5-
30
8m
6m
6m
Using the remote control
Learning about the remote control
Power
Channel Number : Direct channel
selection
1
2
3
4
5
6
Red/Green/Yellow/Cyan buttons :
Fastext
7
8
9
Recall : Return to previous channel
Recall
0
Display
P.Mode : Select picture mode
CH+ : Channel up
P.Mode
VOL- : Volume down
Display : Display current input
Zoom : Ajust zoom ratio
Text
Text : Enter/exit teletext mode
CH+
VOL-
CH- : Channel down
S.Mode : Select sound mode
Power : Power on/off
Menu
VOL+ : Volume up
VOL+
CH-
Menu : Call up the main menu
Mute
S.Mode
Zoom
Still
Video : Switch to SCART1 mode
& SCART2 mode
Video
S-Video
YPbPr : Switch to YPbPr mode
YPbPr
Still : Snapshooting
I
II
PC
Mute : Mute the sound
: Mono/Stereo operation
PC : Switch to VGA/DVI mode
S-Video : Switch to S-VIDEO mode
YCbCr
YCbCr : ABORT key
HYDFSR-EP209C1
-6-
Time
Time : Adjust the sleep time
Using the TV features
Understanding the TV features
Multimedia - TV receiver, Video monitor and PC display, all in one
Wider viewing angle, 16:9 display - over 160 viewing angle, 16:9 ergonomical display panel
Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective
of magnetic or geomagnetic effect
200 channels storage
Sleep timer
Teletext with 252 pages memory
NICAM/A2
Dual SCART interface
Multi-language OSD
Basic Operations
Power ON/OFF
1) Connect the TV to power outlet and switch on the AC power switch. If the power
indicator is red, it means that the TV is off. You need to press the Power button
on the front control or on the remote control to turn on the TV, and the power
indicator will turn blue. Several seconds later, TV picture will display on the
screen.
2) Press the Power button on the front control or on the remote control to turn off
the TV temporarily.
3) Always release the AC power switch or remove the AC power plug from the
outlet when not using for a long period of time.
POWER BUTTON
POWER
(STANDBY)
INDICATOR
Signal source selection
Press the [CH+/CH- ] button to select TV input; press the [VIDEO] button to select SCART1 input or SCART2
input(from SCART2); press the [S-VIDEO] button to select S-VIDEO input;press the [ YPbPr] button to select
YPBPR/YCBCR input; press the [PC] button to select PC input(When you press the PC button first, you can enter
the VGA mode, when you press the PC button again, you can enter the DVI mode).
NOTE: When you press the [ YCbCr ] button, the ABORT KEY will be displayed on the screen, and this
button has no use in this TV.
Select channels by [CH+/CH-]
You can also use[CH+ / CH-] to select channels. [CH+] indicates channel number increase; [CH-] indicates channel
number decrease.
-7-
Using the TV features
Select channels by numbers
To select a channel : Press the channel numbers in series to select channel directly.
For example, to seclect channel 120, Press the button 1, and 1_ _ will display on the top right corner of the screen,
then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120.
NOTE:
1) When you changing the channel, the sound state colour system state & sound system state graphics can be
displayed below the channel number. There are 3 sound states in this TV. If the sound is mono, the graphics is ,
If the sound is stereo, the graphics is . If the sound is dual I/II or NICAM dual I/II, the graphics is
. But the
colour system state & sound system state is you preset the state.
2) When changing the channel, the sound of current channel will be firstly changed to stereo, NICAM dual I or DUAL I
according to the sound state of current channel. You can press the I/II button on the remote control to change
current sound type.
Adjust Volume
When menu is not displayed on the screen, press [VOL-] or [VOL+] to adjust the volume.
Use [Recall] button
Press the [ Recall ] button repeatedly to alternate between the present channel and the previous channel.
Display channel number
Press [Display] button to display the present channel number, but it will also disappear 3 seconds after your pressing.
Select picture modes
You can select the picture mode fromamong three preset modes and one user-set
mode. Press the [ P.mode ] button repeatedly to select the desired picture mode.
BRIGHT
NORMAL
SOFT
USER
Select sound modes
You can select the sound mode from among three preset modes and one user-set
mode. Press the [ S.mode ] button repeatedly to select the desired sound mode.
SPEECH
NORMAL
MUSIC
USER
Use [Still] button
Press the [ Still ] button to snapshot the present picture, and press again to return to normal watching.
Use [ Zoom ] button
Press the [ Zoom ] button to adjust the screen aspect ratio and zoom ratio.
Mute function
Press [ Mute ] button repeatedly to switch between mute and unmute mode.
-8-
Using the TV features
Using the CHANNEL menu
PROGRAM
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item CHANNEL.
3) Press the [CH+ or CH-] button to select PROGRAM.
4) Press the [VOL+ or VOL-] button to select the present channel.
CHANNEL
PROGRAM
SOUND SYSTEM
Sound system
AUTO SEARCH
You can set sound syetem.
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item CHANNEL.
3) Press the [CH+ or CH-] button to select sound system.and press
the [VOL+] button to enter sound system.
4) Press the [VOL+ ] button to switch among AUTO, D/K, B/G, I, L, L`.
MANUAL SEARCH
FINE TUNE
SKIP
CHANNEL EDIT
AUTO SEARCH
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item CHANNEL.
3) Press the [CH+ or CH-] button to select AUTO SEARCH.
4) Press the [ VOL+] button to start auto searching.
MANUAL SEARCH
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item CHANNEL.
3) Press the [CH+ or CH-] button to select MANUAL SEARCH.
4) Press the [ VOL+ or VOL-] button to start MANUAL searching.
FINE TUNE
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item CHANNEL.
3) Press the [CH+ or CH-] button to select FINE TUNE.
4) Press the [ VOL+ or VOL-] button to fine tune current channel.
SKIP
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item CHANNEL.
3) Press the [CH+ or CH-] button to select SKIP.
4) Press the [VOL+] button to skip or unskip the present channel.
NOTE: The 'skipped' channels cannot be accessed by [CH+ or CH-] , but you can access them by digit (direct select) button.
CHANNEL EDIT
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item CHANNEL.
3) Press the [CH+ or CH-] button to select CHANNEL EDIT.
4) Press the [ VOL+] button to start CHANNEL EDIT.
-9-
Using the TV features
Using the PICTURE menu
PROGRAM
Adjust picture settings
PICTURE PARAMETERS
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item
PICTURE PARAMETERS.
3) Press the [CH+ or CH-] button to select the item you want to adjust.
4) Press the [VOL+ or VOL-] button to adjust the level.
5) The adjusted data is stored automatically in the user mode of picture.
NOTE : The COLOUR TEMP only can be adjusted in the PC mode.
.
BRIGHTNESS
CONTRAST
SATURATION
COLOUR TEMP
FLESHTONE
SHARPNESS
NOISE REDUCE
Using the AUDIO SETTINGS menu
Adjust audio settings
AUDIO SETTINGS
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item AUDIO SETTINGS.
3) Press the [CH+ or CH-] button to select the item you want to adjust.
4) Press the [VOL+ or VOL-] button to adjust the level.
5) The adjusted data is stored automatically in the user mode of sound.
BASS
TREBLE
BALANCE
Using the PIP menu
PICTURE-IN-PICTURE
1) Press the MENU button to enter the main menu, press the
[VOL+ or VOL-] to select the PICTURE-IN-PICTURE.
2) Press the [CH+ or CH-] button to select the PIP SIZE, and
PIP POSITION
press the [ VOL+] button to enter the PIP SIZE, press the
PIP SIZE
[CH+ or CH-] button to select the OFF/PIP/PBP .
PIPBRIGHTNESS
3) Press the [CH+ or CH-] button to select the PIP SOURCE, and
press the[ VOL+] button to enter the PIP SOURCE, press the
PIP CONTRAST
[CH+ or CH-] button to select the pip source.
PIP SOURCE
4) Press the [CH+ or CH-] button to select the PIP POSITION or PIP
BRIGHTNESS or PIP CONTRAST, press the [VOL+ or VOL-] button to adjust the value.
Note: 1) When main picture is TV/ SCART1/ SCART2/ S-VIDEO, pip picture is YPbPr/ VGA/ DVI.
2) When main picture is YPbPr/ VGA/ DVI, pip picture is TV/ SCART1/ SCART2/ S-VIDEO.
-10 -
Using the TV features
Using the MENU LOCK SETTING menu
LOCK MENU
MENU LOCK SETTING
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item MENU
LOCK SETTING.
3) Press the [CH+ or CH-] button to select the LOCK MENU.
4) Press the [VOL+ ] button to enable the LOCK MENU.
LOCK MENU
SET PASSWORD
SET PASSWORD
Password is a four-digit number. The preset password is 1111.
If you want to change the password,you must enter the preset password.
1) Press the [CH+ or CH-] button to select SET PASSWORD,and enter the
preset password.
Enter the Menu Lock Password
______
OK
CANCEL
CHANGE PASSWORD
MPAA TATTING/TV RATTING
1) Press the [CH+ or CH-] button to select SET PASSWORD,
and press the [ VOL+] to enter SET PASSWORD.
2) Input the new password , So you succeed in changing the password.
Setting Password
Please Enter Password You Want.
______
OK
CANCEL
-11 -
Using the TV features
Using the GENERAL SETTINGS menu
OSD POSITION
GENERAL SETTINGS
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item
GENERAL SETTINGS.
3) Press the [CH+ or CH-] button to select OSD POSITION.
4) Press the [VOL+ or VOL- or CH+ or CH-] button to
adjust the OSD POSITION.
LANGUAGE
ENGLISH
OSD POSITION
COLOUR SYSTEM
OSD LANGUAGE
BLANK
SLEEP TIMER
Colour system
TRANSPARENCY
You can set colour system.
DEINTERLACER
1) Press the [MENU] button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS.
3) Press the [CH+ or CH-] button to select colour system, and press
the [VOL+] button to enter colour system.
4) Press the [VOL+ ] button to switch among AUTO, PAL and SECAM.
OSD LANGUAGE
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS.
CHANGE
3) Press
the [CH+PASSWORD
or CH-] button to select OSD LANGUAGE,and press the [VOL+] button
to enter the OSD LANGUAGE.
4) Press the [ VOL+] button to select the language of OSD (on screen display).
BLANK
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS.
3) Press the [CH+ or CH-] button to select BLANK.
4) Press the [ VOL+] button to enable the BLANK.
NOTE: When you enable the blank,the screen will turn into blank screen saver mode in case of valid input
signal, The screen will turn into auto screen saver mode several seconds later,and into stand-by mode 15
minutes later.
SLEEP TIMER
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS.
3) Press the [CH+ or CH-] button to select SLEEP TIMER.
4) Press the [ VOL+] button to adjust the SLEEP TIMER.
TRANSPARENCY
1) Press the MENU button to enter the main menu.
2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS.
3) Press the [CH+ or CH-] button to select TRANSPARENCY.
4) Press the [ VOL+ or VOL-] button to adjust the value.
-12 -
Using the TV features
Using the GENERAL SETTINGS menu
DEINTERLACER
1) Press the MENU button to enter the main menu.
2) Press the [ VOL+ or VOL- ] button to select the item GENERAL SETTINGS.
3) Press the [ CH+ or CH- ] button to select DEINTERLACER.
4) Press the [ VOL+ ] button to enter the DEINTERLACER .
5) Press the [ CH+ or CH- ] button to select the different feature.
Teletext Operations
SELECTING TELETEXT MODE
Select the channel that is broadcasting the desired Teletext program.
Press [ TEXT ] button and alternate between Teletext mode and normal mode.
Note: All the operations below should be executed in the Teletext mode only.
PAGE SELECTION
You can directly input your desired page number by pressing [0~9] buttons.
You can sequentially read pages by pressing [ or ] button.
HOLD
Some Teletext information is contained on more than one page, the pages automatically changing
after a given reading time.
Press [ S-Video ] button to stop the page changing.
Press [ S-Video ] button again to allow the page to change.
REVEAL
Some Teletext pages contain quiz or questions with hidden answers.
Press the [
] button to see the answers.
Press the [
] button again to hide the answers.
CANCEL
When a page is selected in Teletext mode it may take some time before it becomes available.
Press the [ YPbPr ] button to switch to the TV mode.
When the required page is found, the page number will appear at the top of the TV picture,
press the [ YPbPr ] button to return to the selected Teletext page.
Note: You can change TV program while in this mode.
SUB CODE
Some Teletext pages contain sub page that require you to input the sub code.
Press [ P.mode ] button until S**** is displayed, and enter four-digit sub code for the sub page you need.
MIX
You can mix Teletext with TV pictures, which means transparent teletext.
Press [ Video ] to mix, and press [ Video ] again to cancel the mixed effect..
-13-
Using the TV features
Teletext Operations
ZOOM (Top/Bottom/Full)
Using SIZE to enable easier reading (larger display).
Press the [ PC ] button to display the TOP HALF of the page.
Press again to display the BOTTOM HALF of the page.
Press again to return to a FULL PAGE display.
Note: Changing pages will return to a full page display.
TIME
Time information is contained in the teletext broadcast.
In Teletext mode, press [ Time ] to display the time.
FAST TEXT
The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages
transmitted by FAST TEXT broadcast.
INDEX
Teletext index page guides you quickly to your desired page.
Press [ S.mode ] button to enter index page.
Appendix
Cleaning and care
WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.
To clean the TV screen:
1) Unplug the TV to avoid possible shock hazard.
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm
water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet
can cause damage to the TV.
3) Wipe off any excess moisture with a clean dry cloth.
4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
Customer important notice
When the TV can not be operated in some special situation, please unplug the power and restart.
-14 -
Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Symptoms
Possible Solutions
TV will not turn on
Make sure the power cord is plugged in, then press [Power].
The remote control batteries may be dead. Replace the batteries.
No picture, no sound
Check if you have set the off timer.
Check the antenna/cable connections.
Press [Display] to see if you have select the right signal source.
No sound, picture OK
The sound may be muted. Press [ VOL+ ] on the remote control or .
The station may have broadcast difficulties. Try another channel.
Check the speakers cable connections.
Poor sound, picture OK
The station may have broadcast difficulties. Try another channel
Check the speakers cable connections.
Poor picture, sound OK
Check the antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the picture from the menu.
Unable to select a certain channel
The channel may be skipped. See SKIP on page 9.
Poor colour or no colour
The station may have broadcast difficulties. Try another channel.
Adjust the SATURATION in the menu.
The remote control does not operate
There may be an obstruction between the remote control and the
remote control sensor.
The batteries may be installed with a wrong polarity.
The remote control batteries may be dead. Replace the batteries.
Check if you have entered Teletext mode. Press [ Text ] to quit.
Disorder display at power on
This may be caused by too short interval between power off and on.
Unplug the power and restart.
-15-
Specifications
Screen Size:
Native Resolution:
Brightness:
Contrast Ratio:
Colour System:
Sound System:
Tuner:
Antenna:
Stereo:
VIDEO INPUT:
SCART-1 (Video and RGB)
SCART-2 (Video )
S-VIDEO
Audio in
COMPONENT
Audio in
PC
VGA
26-inc h(66c m)TFT LCD TV
1280 768 Pixels(corresponding to WXGA)
500 cd/m2
600:1
PAL/SECAM
B/G, D/K, I, L/L
VHF/UHF:48.25~863.25MHz
75 VHF/UHF input
NICAM/A2
Video:1 Vp-p, negative sync, 75 input
RGB:0.7 Vp-p, 75 input
Video:1 Vp-p, negative sync, 75 input
Y/C separate video signal :
Y...1 Vp-p/negative sync/75 input
C...0.283 Vp-p/75 input (NTSC)
0.3 Vp-p/75 input (PAL)
Stereo audio input for SCART1 and SCART2
RCA, 0.7 Vp-p/75 input
(480I/60Hz, 480P/60Hz, 576I/50Hz,576P/50Hz, 720P/50Hz,
1080I/50,1080I/60Hz)
RCA Stereo audio input
Audio in
15 Pin , Analog RGB signal, 0.7Vp-p, 75 input
(VGA, SVGA, XGA, SXGA computer signal compatibility)
30 Pin, Digital RGB signal
(VGA, SVGA, XGA, SXGA computer signal compatibility)
provides a direct digital to digital
RCA Stereo audio input
MONITOR OUT
Audio/Video Output
Speaker Output
Power Requirement
Power Consumption
Dimensions(mm)
Weight
SCART1:CANAL+
5W+5W
AC 100 to 240V, 50/60Hz
145W
690(W)X570(H)X330(D)
14kg
DVI
Allowable temperature of operation environment
..............................................0 to 40
ACCESSORIES
Operating Instructions
Remote Control Unit
Power Lead
Dry Cell Battery
1
1
1
2
NOTE: Specifications and design are subject to possible modifications without notice due to improvements
-16 -

advertisement

Related manuals

Download PDF

advertisement