Akura ANLGT2-X User manual

Akura ANLGT2-X User manual

GT2 INSTRUCTION MANUAL

0

TABLE OF CONTENTS

Safety Instructions …………………………………………………………………………… Important Information about the audio system …………………………………………… Changing a guitar string ……………………………………………………………………… 3 5 5 Installation & Assembly ……………………………………………………………………… Handling Compact Discs ……………………………………………………………………. Controls and Indicators ……………………………………………………………………… Remote Control Functions ………………………………………………………………….. Aerial and Speaker Connections …………………………………………………………… Precautions for us e …………………………………………………………………………… Operation ……………………………………………………………………………………… 6 7 8 10 12 13 Speci fications ………………………………………………………………………………… 14 Selecting a different track during play …………………………………………………… 15 Programming tracks …………………………………………………………………………… 15 Radio Operation………………………………………………………………………………… 17 18 1

Page 2

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE) The crossed out “Wheelie bin” is intended to show that this appliance must not be placed with ordinary household waste at the end of its useful life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please keep separate from other household waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where you purchased the product, or their local government office for details of where and how you can take this item for environmentally safe re-cycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product must not be mixed with other commercial wastes for disposal 2

Page 2 cont….

This unit is a “CLASS 1” laser product. This product uses a visible laser beam which could cause hazardous radiation exposure. Ensure the player is operated as instructed. Do not look into the Laser whilst power is applied. Do NOT modify or adjust any controls that may affect laser emissions. Should the appliance become faulty consult a qualified technician. 3

SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS – All the safety and operating instructions should be read before the appliance is 2. 3. 4. 5. 6. operated. RETAIN INSTRUCTIONS – The safety and operating instruction should be retained for future reference. HEED WARNINGS – All warnings on the appliance and in the operating instructions should be adhered to . FOLLOW INSTRUCTIONS – All operating and use instructions should be followed. WATER AND MOISTURE – The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. VENTILATION – The appliance should be situated so that its location or position does not interfere with its proper ventilation, for example, the appliance should not be situated on a bed, sofa , rug or similar surface that 7. 8. may block the ventilation openings. HEAT – The appliance should be situated away from heat sources such as radiators, heat radiators, stoves, or other appliance (including amplifiers) that produce heat. POWER SOURCES – The appliance should be connected to a power supply only of the type described in the

9.

operating instructions or as marked on the appliance. POWER CORD PROTECTION – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the appliance.

10. CLEANING . Use a soft cloth or duster. If the stains are sticky use a mild detergent. Do NOT use petrol based 4

fluids or abrasive cleaners, you will damage the surface. 11. NONUSE PERIODS – The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for a long period of time. 12. OBJECT and LIQUID ENTRY – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 13. WALL MOUNTING – If the appliance is mounted to a wall it should be mounted only as recommended by the manufacturer. 14. SERVICING – The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other servicing should be referred to qualified service personnel. 15. ADAPTOR / TRANSFORMER – The appliance is equipped with an adaptor / transformer. This adaptor converts the input from the AC current to DC current. 16. On no account must appliance be connected to a socket on the wall without first passing through the supplied adaptor. If for any reason the adaptor supplied ceases to operate, you should contact a qualified service engineer 17. DAMAGE REQUIRING SERVICE – The appliance should be serviced by qualified service personnel when: A. The power-supply cord or plug has been damaged. B. Objects have fallen into, or liquid has been spilled into the appliance enclosure. C. The appliance has been exposed to rain. D. The appliance has been dropped, or the enclosure damaged. E. The appliance does not appear to operate normally or exhibits a marked change in performance. 5

IMPORTANT INFORMATION

ABOUT YOU AUDIO SYSTEM

Your audio system although resembling a guitar in design IS NOT A GUITAR, and the guitar strings are for display purposes only and are not for playing. This pro duct should be used for playing CD’s or the Radio while the product is mounted on the stand or wall bracket supplied. This system should not be used while being held in you hands. In the event that the guitar strings are stretched or broken through being used incorrectly, they are not covered by any guarantee. The guitar strings can however be changed or renewed by following the instructions explained under.

Guitar Strings:

1. The strings on the guitar are fitted for cosmetic appearance only and are not for playing. musical instrument dealer.

2. These controls do not tighten or slacken the strings and are for cosmetic appearance only. In the unlikely event that a string needs replacing, you should remove the neck of the guitar from the body, (see instructions on reverse side of guitar) and take the neck to a 6

INSTALLATION & ASSEMBLY

Remove the unit from the carton very carefully. It will be in two pieces the neck and the body, Retain all packing for future use. You will also find a stand, a wall-mounting bracket, a mains adapter and a remote control in the carton. The neck of the guitar fits snugly into the body along plastic rails that are moulded into the body of the guitar (The plastic plug should be pushed into the back of the guitar after the neck has been inserted into the body, in order to hold the neck in place. (See 2 This plug should be removed if it becomes necessary to remove the neck.) If you intend to use the unit on its stand, this should now be placed in the area where the unit will be used. The stand has three legs. These legs should be spread out, and the top of the stand pushed firmly into the opening in order to complete the assembly of the stand. The guitar should now be placed on the stand. Assembly of the stand. The guitar should now be placed on the stand. S C R E W X 4 W A L L If you intend to use the unit from the wall-mounting bracket this should be screwed on the wall in the W A L L M O U N T W A L L appropriate position using suitable wall plugs

(Screws and raw plugs are supplied, but these may not necessarily be correct for your installation.) The guitar should be hung from the bracket as per the above drawing.

W A L L S O C K E T 7

Connecting the power cord

When you are satisfied that the product is resting securely either on its stand or on the supplied wall bracket, you should remove the adapter/transformer Step 1 is to plug the jack plug of the power cord into the guitar as per diagram above. Step 2 is to plug the other end of the power cord on which is located the transformer into a suitable socket from the packaging      

Handle the disks by its edge.

Keep the disc clean, do not dirty disc’s surface. Store the CD in a protective case. cleaning fluid. on the wall. Clean CD’s by carefully wiping the CD with a soft cloth.

HANDLING COMPACT DISCS

Dust and fingerprints can affect the reproduction quality of the CD. To avoid damaging the disc, never use chemicals such as record sprays, anti static sprays, benzene, or Do not expose disks to direct sunlight, high humidity or high temperatures, for extended periods. Prolonged exposure to high temperatures can warp the disc.

8

9 10 11 1

CONTROLS AND INDICATORS

2 3 4 5 6 7 8 12 13 14 9 1.

Button

Press to switch the unit on or off 2. STAND BY Indicator 3. FM Stereo Indicator 4. CD Mode Indicator 5. FM Mode Indicator 6. AM Mode Indicator 7. Function Control Change >FM>AM>CD Mode 8. OPEN/CLOSE OPENS and CLOSES CD DOOR

9.

R-SKIP button

10. PLAY/PAUSE button

Changing between PLAY mode and PAUSE mode. 11. STOP Button To stop playback. 12. F-SKIP button .

13. PROGRAM button

15 16 17 18 19

● Enter “Memory Registration” mode from Stop mode ● Register a selected track number into program memory 14. REPEAT button Set the repeat playing one track or all the tracks.

15. REMOTE SENSOR Receives signals from the remote control. 16. CD Digital Display 17. PLAY Indicator 25 24 18. REPEAT Indicator 19. PROGRAM Indicator 20. Tuning Control Tunes the tuner to the desired stations 21. Volume Control Adjusts the volume level 22. PHONES Connection for headphones jack. 23. DC 12V 20 21 23 Connection for power cord. 24. FM Ant Pigtail FM aerial wire.

25. EXT. SPEAKERS For connecting external additional speakers.

10

2.  3.  

REMOTE CONTROL FUNCTIONS

Preparation before use

 Installing batteries in the remote control unit 1. Remove the battery cover from the back of the remote control unit. Insert two “UM3/AAA” size batteries. Insert the batteries with the + and - terminals matching the indication inside the battery compartment. Replace the cover. Battery replacement When the remote control operation becomes unstable or the distance from which remote control is possible becomes shorter,  replace the batteries with new ones. Exhausted Batteries. Do not break open or throw on a fire exhausted batteries. Consult your locat waste authority for disposal

Using the remote control unit

To use the remote unit, point at the REMOTE SENSOR and press the buttons gently and firmly. Remote control operation is possible within approximate 18ft(6m). However, since the remote control range is less when the unit is used at an angle, use directly in front of the REMOTE SENSOR, for maximum distance. Do not expose the REMOTE SENSOR to strong light (direct sunlight or artificial lighting) and make sure that there are no obstacles between the REMOTE SENSOR and the remote control unit. 11

REMOTE CONTROL

1. PLAY/PAUSE button ● Start playing from stop mode ● Start pause during play ● Return to play mode from a mode 2. R-SKIP button ● Change the starting play track during stop mode, cyclic to the last track if it is in the first track ● Skip to the previous track during Normal play/pause, cyclic to last track if it is in the first track ● Skip to the previous programmed track during Program play/pause, cyclic to the first programmed track 3. PROGRAM button ● Enter “Memory Registration” mode from Stop mode ● Register a selectedd track number into program memory 4. F-SKIP button ● Change the starting play track during stop mode,cyclic to the last track if it is in the first track ● Skip to the next track during Normal play/pause,cyclic to last track if it is in the first track ● Skip to the next programmed track during Program 12 1 2 3 4 5 6 play/pause,cyclic to the first programmed track ● Skip to the next random track during Random play/pause 5. REPEAT button Set the repeat playing one track or all the tracks.

6.STOP button

CONNECTIONS

A. B. C. Terminal for FM antenna. Adjust the position of FM antenna for FM antenna for optimum reception. For good FM stereo reception, use an FM outdoor antenna or connect the supplied antenna wire to your house distribution system. Extension Speaker outlet if required, Connect the red plug to the R jack, and the white plug to the L jack.

13 SPEAKER BOX FM ANTENNA SPEAKER BOX

PRECAUTIONS FOR USE

INSTALLATION

U npack all parts and remove protective material. Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made. Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.

OPERATION / COMPACT DISC

Bear in mind the following points since any dirt; scratches or warping of the disc can cause broken or intermittent sound and also noise.   When holding the discs, take care not to touch the playing surface. Do not place discs in the following locations: Near a heating device or place where the temperature is high;  In damp or dusty areas. Wipe away any fingerprints or dust on the playing surface of a disc using a soft cloth. Always wipe from the inside toward the outside of the disc. 14

OPERATION POWER STANDBY ON/OFF

When you first plug the unit into the mains, the unit will go into standby mode.  You can press POWER to switch on the unit.   The unit stays in standby until the Power button is pressed. For energy conservation and safety it is recommended that the mains adaptor is turned off at the socket when not in use

LOADING THE DISC

 Press the Function button Change to the CD mode.  Open the CD door.    Place a CD (printed side up) on the tray. Close the CD door. After a while, the display shows the CD total number of tracks .

PLAYING THE ENTIRE DISC

   Press PLAY/PAUSE button in stop mode. Play starts with the first track. The display shows the current track number .  When all the tracks have been played, the CD player stops and the total number of tracks is shown on the display. 15

    To stop play, press STOP button. To interrupt play, press PLAY/PAUSE button in play mode.

To resume play, press the same button again.

SELECTING A DIFFERENT TRACK DURING PLAY

1. Press R-SKIP or F-SKIP until the required track number appears in the display. 2. “START TRACK AGAIN THAT IS CURRENTLY PLAYING” by pressing DN/R-SKIP. Press and hold F-SKIP to quick search for the required passage in the current track and release the button for play to continue. The volume will return to its normal level when the search button is released.

PROGRAMING TRACKS

Any desired tracks Up to 19 can be played in any order by program play. 1. Load a CD as described under inserting the disc. 2. If (PROGRAM) key is pressed during the CD stop mode, the system goes to the program mode. During the program mode,the track number and PROGRAM display will fiash in the 500[ms] interval. 3. If (R-SKIP/F-SKIP) key is pressed, the system chooses the track number that it wants to register. 4. If (PROGRAM) key is pressed after choosing a track number, the system keeps the track number, and goes to next program mode. 5. The system can hold 19 programs. After the system held 19 programs,it can`t keep another song.During the system holding 19 programs,it can`t keep other program. PROGRAM display and “-- --“will flash in the 500[ms] interval. 16

6. If [STOP] key is pressed during the program mode, the system removes the contents of the program, and cancels the program mode. 7. If [play] key is pressed during the system holding the program of more than one, it starts the program play. During the program play, Display shows PROGRAM display. 8. If [R-SKIP / F-SKIP] key is pressed during the program play, the system skips to next / previous program. 9. If [STOP] key is pressed during the program play, the system stops the program play, and goes the stop mode, Until [STOP] key is pressed during the stop the mode, the system keeps the contents of the program.

Radio Operation

FM. Press the Function button to select FM mode. Rotate the Tuning control to select the desired station. If the station is weak or noisy try placing the wire aerial in another position. AM. Press the Function button to select AM Mode. Rotate the Tuning control to srlect the desired station. If the station is weak or noisy rotate the body of the guitar for optimum reception.

Headphones.

A connector is provided for personal listening. When headphones are connected the internal speakers are muted.

Extension Loudspeakers

. If external loudspeakers are used, the plug will switch off the internal speaker for each channel

17

SPECIFICATIONS

Power Supply Output Power (Per channel) Radio Section Compact Disc Section Frequency Response (-3dB) Signal-to-noise Ratio Harmonic Distortion : : : : : : DC 12V power 2.0 watts RMS into 8 ohm AM 540 – 1710 KHz FM 88 – 108 MHz 60 – 16,000 Hz 70 dB 0.4%

CONTINUOUS IMPROVEMENTS ARE BEING MADE TO OUR EQUIPMENT BOTH IN QUALITY AND PERFORMANCE, THUS WE RESERVE THE RIGHT TO ALTER SPECIFICATIONS WITHOUT NOTICE

18

19

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement