Akura APL21668-FD 21.6" Full HD LCD TV Instruction Manual

Akura APL21668-FD 21.6" Full HD LCD TV Instruction Manual

Model : APL21668FD

SP 7050

21.5” (54.6cm) Digital LCD TV

with DVBt “Freeview” HDMI Customer Help Line : 0845 293 7698 Website : www.ekey.co.uk

LCD Screen Although the LCD screen is made with high precision technology and 99.9% or more of the pixels are effective, dots may appear. These can be black or bright dots (red, green or blue) and may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction.

Contents

8. 9. 10. 11. 12. 13. 14. 15. LCD SCREEN WARNING 1. Safety Information 2. Safety Instructions 3. Accessories 4. User Controls 5. Remote Control 6. Connections 7. Menu Operation General 16. 17. 18. Menu Operation (Digital) Menu Operation (Analog) EPG (Electronic Programme Guide “Digital only”) Cam Module Teletext (Analog) Teletext (Digital) Digital Radio Trouble Shooting Guide Wall Mounting Mains Plug Wiring Specifications Inside cover page 2 3 4 4 5 7 9 13 15 17 18 19 19 19 20 21 21 22

1. Safety Information

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE) The crossed out “Wheelie bin” is intended to show that this appliance must not be placed with ordinary household waste at the end of its useful life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please keep separate from other household waste and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where you purchased the product, or their local government office for details of where and how you can take this item for environmentally safe re-cycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product must not be mixed with other commercial wastes for disposal This appliance complies with European Safety and Electrical directives

2

2. Safety Instructions

CAUTION. PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS USER MANUAL AND MARKED ON THE APPLIANCE. RETAIN THIS BOOKLET FOR FUTURE USE.

This set has been designed and manufactured to assure your personal safety. Improper use can result in Electric shock or Fire hazard. The safeguards in this appliance will protect you if you observe the correct procedures for installation, servicing and operation. There are NO user parts inside. DO NOT REMOVE THE CASE OR OTHER COVERS OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGES AND WILL INVALIDATE YOUR WARRANTY. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.

Unpacking and Handling

. Open the carton carefully and remove the polyfoam packing. Carefully lift the TV and place onto a firm stable surface. Lift off the Poly bag and retain all packaging for future use. Keep all packaging away from small children and animals.

Placing TV

. The TV should be placed on a firm table or shelf. If placing in a cabinet ensure there is sufficient spacing for air flow and access for the DVD player opening .

.

Ventilation and Heat Sources

. Do not place material over the ventilation slots, this will cause the TV to overheat and fail. Do not place the TV in direct sunlight or near heat sources such as radiators or fires.

Connections

. When connecting the TV to external sources and the mains supply, do not place wires that can be tripped over. Do not trap or place heavy objects on the mains lead or adaptor.

Dis-connection Device.

times The mains plug is the Disconnection device and MUST be accessible at all

Moisture.

damp places. Do not allow water or other fluids to enter the TV.

with wet hands. Should moisture enter the TV, disconnect from the supply and call the customer help line.

Do not place the TV in wet or damp conditions, such as steamy kitchens, basements or other Do not touch the Mains plug or adaptor

Cleaning.

Disconnect the TV from the mains supply. Use a soft dry cloth, for stubborn stains use a soft moist cloth with a dilute mild detergent.. Do NOT use petrol based fluids or abrasive materials.

LCD Screen.

Do not hit or cause impact to the LCD screen. The screen consists of many individual pixels and is easily damaged. Bright or dark dots may occur and are not covered by warranty.

Lightning.

During a thunderstorm or when leaving the appliance for long periods such as holidays, disconnect the aerial input (if external aerial) and remove the mains plug, This is to prevent power surges damaging the apparatus

Headphone Use.

When using headphones do not use for long periods. Loud music can permanently damage your hearing.

DIGITAL SWITCH OVER AND YOUR TV.

WHAT YOU NEED TO DO TO ENJOY WATCHING TV DURING AND FOLLOWING DIGITAL SWITCH OVER.

Starting in 2008 and ending in 2012, television services will go completely digital, TV region by TV region.

To continue using this digital TV during and following the digital switchover, you will need to “reset” your digital TV channels.

Users of this digital TV must reset on at least 2 different occasions, normally 1 month apart when your switchover happens. Digital UK, the body leading the digital switchover, and broadcasters, will advise you when to reset your digital channels on each occasion.

If you do not reset your digital channels, you risk loosing some or all of your TV services during and following switchover.

Please refer to this instruction manual to retune the Digital TV services.

Do NOT use “ADD” channels, you MUST “RESET” and allow a complete retune. (See page 14)

For more information please contact the “Customer Help Line” (Page 17) or visit www.digitaluk.co.uk

3

3. Accessories

Please check the contents of the TV before you continue. If any item is missing please contact your point of purchase.

User Manual Remote Control 4. User Controls.

AC/DC Adaptor Mains lead

1. Power

. Turns TV On from standby. Also returns TV to standby.

2. Vol –

Reduces Volume level.

In menu mode will shift the selection to the left, or decreases level being adjusted.

3. Vol +

adjusted.

Increases Volume level. In menu mode, will shift the selection to the right, or increase level being

4. CH - 5. CH +

Reduces channel selection by 1 with each press. In menu mode will shift the selection downwards.

Increases channel selection by 1 with each press. In menu mode will shift the selection upwards.

6. Menu

. Selects the MENU function. If in a sub menu, will revert to previous level of menu.

7. Input. 8. LED.

Selects the different input sources, each press will select another input source.

Displays Tv status. In standby illuminates Red, in operation illuminates Green.

9. I R Lens.

Remote control receiver lens. Do not obstruct or cover.

4

5. Remote Control.

1. STANDBY

. Switches TV to Standby and Operation.

3. P MODE

. Selects picture modes.

5. S MODE

. Selects sound modes.

7. 0-9.

Numeric buttons for direct channel selection or track/chapter numbers.

9. SOURCE

. Selects various input modes.

11. UP.

Navigation button

13. OK

. Confirmation button.

15. LEFT

. Navigation button.

17. VOL -.

Volume down button.

19. VOL +.

Volume up button.

21. LCD MENU

. Enters Setup menus.

23. EPG.

Selects Electronic Programme Guide..

25. TXT.

Selects Teletext.

27. INDEX

. Selects Text index.

29. MIX

. Shows picture in background of Text.

31. REVEAL

. Reveals hidden answers in Text quiz pages.

33. RED

. Red fast text mode.

35. GREEN

. Green fast text mode.

37. HOLD

. HOLD freezes text pages.

39. YELLOW

. Yellow fast text mode.

2. INFO

. Displays TV settings and channel being viewed.

4. MUTE

. Press to mute sound, press again to restore sound.

6. SLEEP

. Sets sleep timer, sets from 3 hrs to 10 minutes.

8. ZOOM

. Selects picture sizes and aspect ratios.

10. FREEZE

. Freezes picture. Press again to restore normal viewing.

12. TV/RADIO

. Selects TV or Radio in DVBt mode.

14. FAV

. Displays Favourite program listing.

16. CH LIST

. Displays list of all received channels.

18. RECALL

. Recalls previous channel viewed.

20. RIGHT

. Navigation button.

22. DOWN

. Navigation button.

24. CH+.

Channel UP select.

26. CH-.

Channel DOWN select.

28. EXIT

. Exits setup menus

30. AUDIO

. Switches between Nicam and Mono in Analog TV mode. In DVBt mode selects different soundtracks if transmitted.

32.SUBTITLE.

Displays subtitles in Analog, and DVBt modes

34. SIZE.

Changes Text size in Analog text mode.

36. SUBPAGE.

Subpage selects subpage numbers in text mode.

38. BLUE

. Blue fast text mode.

5

5. Remote Control.

1.

2.

3.

Open the battery cover Fit two “AAA” and – to -.

batteries (Not supplied). Ensure the battery polarities are correct i.e

Replace the battery cover + to +

To prevent injury, do NOT break open or throw exhausted batteries in a fire. Do not place in the domestic waste, consult your local waste disposal company.

Do not mix batteries, old and new, Carbon or Alkaline.

Do not use re chargeable batteries.

Remove batteries if not using the remote control for long periods to prevent leakage.

If the batteries do leak, clean the compartment with soapy water and scrape any residue from the contacts. To NOT touch or ingest battery residue.

6

6. Connections.

IMPORTANT. When making connections ensure the TV is disconnected from the DC supply input, and that the appliance being connected is also disconnected from the mains supply.

HEAD PHONES

. Stereo output to headphones only.

TV TUNER

. RF input from TV aerial or cable source.( 1 m/V @ 75 Ω ) typical.

CI SLOT

. Place a CAM (Conditional Access Module) into this point to allow a “Pay per View”

SCART.

Audio /Video input and output. (General quality).

AUDIO L/R.

Low level audio inputs used in conjunction with CVBS input.

CVBS

. Low quality video input (1vPP 75 Ω )

Y,Pb,Pr.

Interlace or Sequential Component Video Input, “typical use PS3 input”.

S-VIDEO.

Camcorder signal input (Video only)

PC AUDIO

. Stereo audio input from PC (Used in conjunction with VGA input).

VGA.

PC input (RGB).

HDMI.

Input from HDMI source (High Definition).

DC INPUT

. +12V DC 4.2 A max.

card

Typical connections CVBS Input and Audio Inputs S-VIDEO Input HDMI Input Headphones.

Disconnect TV from mains adaptor.

Plug in headphones.

Re connect adaptor. Turn on TV.

Set volume level for comfortable listening.

Note : Do NOT use headphones at high volume levels for prolonged periods.

Disconnect TV from mains adaptor. Connect CVBS or S-Video lead and Audio L/R (if required).

Apply power to TV and source.

Use

SOURCE/INPUT

button to select AV or S-VIDEO Disconnect TV from mains adaptor.

Connect HDMI input.

Apply power to both TV and source.

Use

SOURCE/INPUT

button to select HDMI.

7

6. Connections.

Antenna or cable SCART.

Disconnect TV from mains adaptor.

Connect scart lead to TV and appliance.

Connect adaptor to TV and power to appliance.

Use

SOURCE/INPUT

to select SCART.

In some circumstances the TV will automatically select scart when the appliance is used.

PC connections.

Disconnect TV from mains adaptor.

Connect VGA (15 pin) plug to TV and PC.

Connect stereo audio lead.

Connect supply to TV and PC.

Use

SOURCE/ INPUT

button to select VGA.

Y,Pb,Pr

Disconnect TV from mains adaptor.

Connect Y,Pb,Pr leads and audio leads to TV and appliance.

It is wise to use dedicated Y,Pb,Pr leads from your retailer.

Re Connect adaptor to TV and power to appliance.

Use

SOURCE/INPUT

button to select Y,Pb,Pr.

8 Mains Adaptor.

Do not connect mains supply until the adaptor is connected to the TV.

6. Connections.

Source/ Input Menu.

To access the Source menu, press the SOURCE button on the Remote or the INPUT button on the TV.

Control Using the ▲ / ▼ select.

buttons select the Source / Input required and press OK to

7. Menu Operation.

Connect the TV to the Mains supply and suitable aerial. It is advisable not to connect other apparatus until you have established that the TV is working correctly. If using the TV for DVBt (Freeview) viewing the existing aerial may not be suitable. Indoor aerials (set top) may not be suitable for some of the received stations. If stations are missing, freeze or break up, it is certainly the aerial signal that is not sufficient.

Turn on the power and a Red led will be displayed in the lower right corner.

Press either the Standby button on the remote control or the Power button on the TV. The led will now turn Green and the screen will light up after approx 5 seconds.

At this stage no stations will be stored.

9

7. Menu Operation.

Basic Tuning

Press the LCD MENU button on the Remote Control. The menu as in Fig 1 will be shown.

Using the ▲ / ▼ buttons select “YES”.

If you are in a different country, select “COUNTRY” use the ► / ◄ buttons to select your country of choice. If you require a different language, select “LANGUAGE” and use the ► / ◄ buttons to select a language of your choice.

“Note: Language may also be selected in the Function Menu”.

When “YES” has been selected Fig 2 will be displayed, showing that the Analog TV channels are being searched.

Fig 1 Fig 2 Fig 3

When searching of the Analog channels have been completed, the TV will then search for the Digital Stations (Fig 3).

When all the channels have been searched the TV will display Channel 1 (BBC1) in DTV Mode.

It may occur that the Analog Stations are not in the correct order to change the order see pages 15/16 .

10

7. Menu Operation.

LCD Menu.

Press the LCD MENU button to display the PICTURE menu, Fig 4 will be displayed.

To select the other menu’s press the menu press the ► ▲ / ▼ button and the Highlight bar at the left of the menu will move Upwards or Downwards To enter each button. To exit any sub menu press the LCD MENU button. To exit the menu’s totally press the EXIT button.

Picture Menu. (Fig 4).

To change the picture settings use the ▲ / ▼ feature and then use the ◄ / ► buttons to select the buttons to change the levels.

Picture Mode

. Select from Personal, Dynamic, Standard and Soft modes.

Personal is an adjustable location to set the picture settings to your choice. Standard is set as the average picture setting.

Movie. Optimised for viewing film material Mild is set as a easy viewing setting.

Game. Optimised for playing games.

Brightness.

Adjusts the overall picture brightness.

Contrast.

Adjusts the ratio of dark to light.

Colour.

Adjusts the colour saturation (colour depth).

Sharpness

. Adjusts the clarity of the picture. If the signal is noisy (analog) then this setting should be reduced to mask the noise.

Tint.

inputs Only available when using NTSC sourced material from the AV

PC Mode. (Fig 5).

The picture settings are different for PC Mode.

H Position

. Adjusts the picture position horizontally.

V Position

. Adjusts the picture position vertically.

Phase.

Adjusts the clock phase to minimise picture jitter.

Clock.

Adjusts the monitor to the PC.

Auto Sync

. Adjusts the PC to the TV automatically. When selected the picture may “jitter” and jump for a few seconds until the adjust ments are optimised.

PC Picture Mode (Fig 6).

The picture setting selection is different for PC operation.

Picture Mode

(as Fig 5)

Brightness.

Adjusts the overall picture brightness.

Contrast.

Adjusts the ratio of dark to light.

Colour Temperature

. Adjusts the colour hardness, select between Normal, Warm, Cold.

11 Fig 4 Fig 5 Fig 6

7. Menu Operation.

Sound. (Fig 7) Sound Mode.

Select from : Personal.

Standard, Music, Voice, Theatre and

Standard

. Used for general viewing.

Music.

Selected for enhanced music appreciation.

Voice

. Selected for News and voice based programmes

Theatre.

Suitable for Films and large productions

Personal

. Adjust for your personal listening.

Bass.

Adjusts lower register frequencies.

Treble

. Adjusts higher register frequencies.

Balance

. Adjusts the level of the left and right speaker.

Function. (Fig 8) Language.

Selects the OSD Language. You may chose between English, Italian, Spanish, Portuguese, French and German. ( The default is English).

Video Size

. Adjusts the Picture size for various aspect ratios you may select from : Auto, Full, 4 : 3, 14 : 9 and Zoom.

TT Language

Hebrew. . Selects Teletext Languages. Chose from Western Europe, Eastern Europe, Russian, Arabic, Farsi, Greek, Cyrillic and

Sleep Timer

. Selects the Sleep Timer settings from OFF, 15, 30, 45, 60, 75, 90, 105, 120 minutes. This may also be selected using the SLEEP button on the Remote Control.

OSD Timer.

This selects the time the OSD menu is displayed on the screen, it can be set from “Never”, 5, 10, 30, 60 Seconds. (Never is OSD ON continuously until it is turned off using the Menu or Exit buttons on the Remote Control).

Blue Screen.

signal is detected the screen displays Blue. In Off mode the screen displays “noise”.

Reset.

This can be turned On or Off. In On mode, when no This resets the User settings back to factory “default” settings.

Child Lock / Key Lock (Fig 9)

. This enables you to set the Child Lock ON, set the password and change the password.

Child Lock

. When set to ON, you must enter the password each time the TV is turned on. normally.

Key lock

ON stops the user from accessing the operation of the TV with the user buttons, the Remote Control functions Select the Child lock menu and press OK. The Password menu will be shown, enter the correct password (0000 factory default) and the Menu (Fig 10) will be shown. Use the ▲ / ▼ buttons to select Child Lock, Key Lock or Change Code. To change each function use the ► / ◄ buttons.

To change the Password code, select “CHANGE CODE” and press OK. Fig 11 will be displayed. Enter the old code and then the new code twice. PASSWORD ACCEPTED message will be displayed. Please ensure you make a note of the new number and KEEP IT SAFE.

12 Fig 7 Fig 8 Fig 9 Fig 10 Fig 11

8. Menu Operation. Digital

Digital Installation.

Should you move to another location you may need to re install the DTV channels. Select Installation and you will see the menu as in FIG 1.

A full retuning will now take place.

DTV Auto Tuning. (Fig 12)

After initial installation it may be necessary to re install all the stations especially if new stations have been added. Select DTV SOURCE. Press LCD MENU and select DTV Tuning menu. Select Auto Tuning and press ► . The sub menu (Fig 13) will be shown. Select YES using the ► / ◄ buttons and press OK. The search tuning will now start and a display will show progress (Fig 14).

When tuning is complete the TV will display the first channel (BBC1) in DVBt mode. All received channels will be stored.

If using in another country, select COUNTRY using the ▲ / ▼ buttons and select the country using the ► / ◄ buttons.

DTV Manual Search. (Fig 15).

It may be necessary to add more digital channels as they are provided by the programme providers or manually tune stations for reasons (above).

Select DTV Manual Tuning and press Ok. Using the ► / ◄ buttons select the

Channel Name

of the multiplex (channel) required. The correct channel numbers are available from the website website www.digitaluk.co.uk

shown which region you are in. www.dtg.org.uk

, and select “Transmitters”. If you do not know which region you are in, go to and Insert your postcode, you will then be At the bottom of the menu you will see a bar scale showing the quality of the signals on that channel. Press OK to start the search. When complete the menu will display the number of TV and Radio stations received, and then return to BBC1. (See Fig 14).

CH MANAGE

.

Enter the

DTV

menu (Fig 12) , select

CH Manage,

and press OK “A sub menu (Fig 16) will be displayed”.

Select “

CH ORGN

” to enter the Channel Organizer menu Fig 17

Fig 17 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 13

8. Menu Operation. Digital

Fig 18 FAV.

To select Stations that you wish to have as “Favourites” station required by using the ▲ / ▼ buttons. Press the select the

RED

button. This will place a Red Heart into the

FAV

column. To de select press the RED button again.

DEL.

To delete any station, use the ▲ / ▼ buttons to select the station and press the

GREEN

button. This will place a White X in the

DEL

column. To delete press OK. You will be asked to confirm the deletion by selecting YES or NO. If you press YES the station will be deleted permanently.

To restore the station you must perform a Manual Tuning or Auto Search as on page 14.

To unselect press the GREEN button again.

MOVE.

You may wish to move a station to another more convenient location.

Select the station using the ▲ / ▼ buttons. Press the

YELLOW

button. A Yellow arrow will be displayed in the

MOVE

column. Using the ▲ / ▼ buttons, select the destination you wish to move the selected station to and press OK. The station will now move and all the stations below will move down one location.

LOCK.

To lock a station (Adult Station). Select the station using the Each time this “Locked” ▲ / ▼ buttons. A box requesting the PASSWORD will be shown. Enter the password. A Blue Lock symbol will now be shown in the

LOCK

column.

You may also add the lock feature to any location without further Password insertions. station is selected you will be requested to enter the Password.

To remove the lock, re enter the Menu and press the Blue button.

Fig 19 RENAMING STATIONS.

It may be necessary to Rename a TV station. Select

CHANNEL ORGANISER

and using the ▲ / ▼ buttons select the station you wish to rename.

Press either of the ► / ◄ buttons. The menu of Fig 19 will be displayed.

To select the letters use the Numeric buttons, to select Upper case or Lower case use the Yellow button, to Select Letters or Numbers use the Red button, to move the cursor use the Blue button, and to Delete a letter use the Green button. When completed press “OK” and the TV will display the new name in that selected location.

Delete All DTV stations

channels will be deleted.

. (Fig 16).

Should you need to Re install the Digital TV stations first you must Delete all the stored stations. Select

DEL TV CH.

Press OK and you will be asked to select YES or NO. If you chose YES all the DTV You must then see page 13 to re install the DTV stations.

14

8. Menu Operation. Digital

Delete All RADIO stations

channels will be deleted.

. (Fig 16).

Should you need to Re install the Digital RADIO stations first you must Delete all the stored stations. Select

DEL RADIO CH.

Press OK and you will be asked to select YES or NO. If you chose YES all the RADIO You must then see page 13 to re install the RADIO stations.

ADVANCED SETTINGS. (Fig 20)

Enter the DTV Menu (Fig 12) and select ADVANCED SETTINGS.

AUDIO.

If other languages are transmitted, you may select them in this mode. Select AUDIO using the ▲ / ▼ buttons and to change the language use the ► / ◄ buttons. (English is default in UK).

SUBTITLE

. If other languages are transmitted, you may select them in this mode. Select SUBTITLE using the ▲ / ▼ buttons and to change the language use the ► / ◄ buttons. (English is default in UK).

CI.

This setting allows you to see the settings of your CI card. For further information see page 18.

Fig 20 Fig 21 Fig 22

9. Menu Operation. Analog

ATV Auto Tuning. (Fig 21)

After initial installation it may be necessary to re install all the stations especially if you have moved the TV to a different area. Select TV SOURCE. Press LCD MENU and select TV Tuning menu, select Auto Tuning and press ► . The sub menu (Fig 22) will be shown. Select YES using the ► / ◄ buttons and press OK. The search tuning will now start and a display will show progress (Fig 23).

When tuning is complete the TV will display the first channel (BBC1) in ANALOG mode. All received channels will be stored.

If using in another country, select COUNTRY using the ▲ / ▼ buttons and select the country using the ► / ◄ buttons.

The Analog stations are stored in station order i.e

BBC1, BBC2 etc, however in certain circumstances a station may be out of order, these stations will need to be correctly ordered, see page 17.

15 Fig 23

9. Menu Operation. Analog

ATV Manual Tuning. (Fig 24).

It may be necessary to add a channel for a TV game or similar without fully retuning the TV.

If you are adding a TV game to be used on the aerial, unplug the TV aerial and insert the game. Ensure the game is turned on.

Using the SOURCE button select TV (Analog).

Open the LCD Menu and select TV. Select “MANUAL TUNING” and press OK. Select CHANNEL and use the ► / ◄ buttons to select a vacant location. Select MANUAL TUNING and press ► to tune upwards or ◄ to tune downwards, Hold down the ► or ◄ button for more than 3 seconds, the TV will then start tuning. To Exit this feature press the ”LCD menu” defaulted to 600Mhz. button. If it is a TV game they are usually

Sound System

moving to Europe the sound setting will need to be changed. Use the ► . In the UK “I” is the correct setting, however if you are button to select the correct system.

“I” “L” UK “default”, “B/G” for Western Europe, “D/K” for France (SECAM) only.

for Eastern Europe.

Colour System

. In the UK and Western Europe except France “PAL” used, In Eastern Europe and France (SECAM) is used. Note (SECAM) is can only be selected when the “Country” is set to a (non UK) setting.

AFT.

Automatically turned ON when the menu’s are closed. Turned OFF when in Manual Tuning.

Channel Edit. (Analog) (Fig 25). Fav “Green”.

To select “Favourite” channels you may “TAG” the stations required and then use the FAV button to select these. Select CHANNEL EDIT and press OK. You will now see Menu Fig 18. Use the ▲ / ▼ buttons to select the required station and press GREEN. This will now place a green tag next to that channel. To remove the tag, press green again.

Skip “Yellow”.

You may wish to “Skip” certain channels when using the CH+/CH again.

buttons. Use the cursor buttons to select the channel you wish to Skip. Press Yellow and a Yellow dot will be shown next to the channel selected. To remove the skip function, press the Yellow button When a channel has been selected to Skip, you still may select that channel with the numeric buttons.

Lock “Blue”.

You may wish to stop certain channels from being selected. Move the cursor to the station you wish to lock, and press the Blue button. To unlock, press the Blue button again.

16 Fig 24 Fig 25

9. Menu Operation. Analog.

Move

If one of the stations has been incorrectly placed in the station listing, you may move it to the correct position, i.e, BBC1, BBC2, ITV, Channel 4, Channel 5. Using the cursor select the channel to be moved, press ► new location using the : , a > will be added to that location see fig 26 . Move the station to the ▲ / ▼ buttons and press OK, this will move the station to the new location, see fig 27. To exit press LCD menu.

When a station is moved, it moves the other stations “Down” location, so it is wise to start at the top. The correct sequence should be BBC1, BBC2, ITV, Chan 4, Chan 5.

one

Rename Stations.

To rename any station, use the “Move” (above) and select the station to be renamed. Press OK and you will see Fig 28. Use the ▲ / ▼ / ► / ◄ menu buttons to navigate around the screen and press OK to enter each letter as required. When the station is renamed, press MENU to exit that level or EXIT to exit the full menu.

10. EPG (Electronic Programme Guide) (DVBt only).

An “Electronic Programme Guide” the programme providers. To access this press the EPG button on the remote control.

EPG is provided by The EPG provides programme information for the next 7 days. (Fig 29) Press ▲ / ▼ to move up and down the list and ► / ◄ move across the list.

to To access any programme use the ▲ / ▼ buttons to highlight, the programme will be shown in the background. Press EXIT to view the programme.

For more information about a programme press the Yellow button “Extended”.

To see programmes for the next day or further, press the Green button and use the Red button to revert to Daily view.

Timer

. (Blue button). You may select a programme on another channel at another time, to switch over automatically when that programme is about to start.

Select the programme and press the Blue button. The Programme title will change from White to Blue. To de select press the Blue button again.

Some boxes may be blank, the data may not available.

To exit the EPG, press the EPG button again or EXIT.

Fig 28 Fig 29 Fig 26 Fig 27 17

11. CAM Module

Using a CAM (Conditional Access Module) (CI Slot).

This feature allows the user to access digital terrestrial “pay per view” channels. To use this facility a conditional access module (CAM) and viewing card need to be obtained by subscribing to a pay channel company.

To insert the module. Ensure the TV is fully disconnected from the power source.

Insert the CAM into the CI slot with the label facing the front of the TV (Fig 30). A positive stop should be felt if correctly fitted.

DO NOT force the module. To release the CAM push the button adjacent to the card and slide the module away from the TV.

Reconnect the TV and switch on. Select DTV. Insert your “Pay per view” card. “Do NOT touch the gold contacts” Press the LCD Menu button and select DTV Setting menu. Select CI Information and press ► . If everything is working ok you will see (Fig 31). press OK. If things are working Ok you should see the information as in Fig 32.

To check the module is working use the information as in Fig 33 ▲ / ▼ buttons to select Module Information and press OK, you should now see the To check the card is working Ok select Smart Card Information and press OK. Again if everything is ok you will see a list as Fig 34. If the information is not present, remove the card reverse and reinsert. This information should now be seen.

Exit the menu’s by pressing LCD menu and you are ready to view “Pay per view” channels.

To obtain the CAM and pay per view card, these may be purchased from good high street stores.

Fig 30 Fig 31 Fig 32 Fig 33 Fig 34 18

12. Teletext. (Analog) TV

Teletext is an information system broadcast by certain programme Subtitles for viewers hard of hearing. Weather, Travel information, games and many other services.

providers. It can provide Below is a description of the buttons associated with Teletext.

TEXT.

Press to select Teletext, press again to exit.

MIX INDEX.

Press to access the index page directly.

SIZE.

Press to mix the video information to the text page. Press again to turn off.

Press to increase the text size in the top half of the page, press again to increase the text size in the lower half of the page, press again to return to normal text size.

REVEAL.

Press to reveal hidden answers in quizzes or puzzles.

SUBPAGE

. Some text pages may contain several sub pages. To access these press this button and then enter the page number using the numeric buttons. Press again to exit the feature.

COLOUR BUTTONS

. Red, Green, Yellow, Blue are used as fast access buttons to pages of text which are highlighted at the bottom of each text page.

HOLD.

Press to hold any text page for easy viewing. Press again to return to normal.

Fig 35

13. Teletext. (Digital) TV

(Fig 35)

Teletext is provided in the DVBt service and operates differently from Analog TV To enter TELETEXT, press the RED Button. Use the ▲ / ▼ buttons to select the category you require and press OK to enter. In each category there will be sub pages. Use the ▲ / ▼ buttons and OK button to select.

To exit Teletext. Press the TEXT button.

14. Digital Radio.

(Fig 36)

To access the Digital Radio Stations continue as follows : Press the DTV/RADIO button. Use the EPG button to see the Radio station listing. Select the radio station you require using the ▲ / ▼ buttons and press OK. You may also use “Direct Button entry” using the “Numeric Buttons”..

To return to DTV mode use the DTV/RADIO button again.

Fig 36 19

15. Trouble shooting guide.

Should you experience difficulties operating this product please the Customer Help Line.

consult the guide below before calling

SYMPTOM

Dead. No led lit No Picture. Led lit Red

POSSIBLE CAUSE

Power not connected to TV TV in standby. No picture. Dark screen Led lit Green No picture. Blue screen. No signal displayed Backlight faulty Incorrect input setting Aerial not connected TV not tuned in TV Picture noisy and ghosting (Analog) TV Picture freezing and breaking up (Digital). Poor aerial signal Poor aerial signal Teletext freezing or breaking up Poor aerial signal Digital Signals missing Bright dots or Dark dots Poor aerial signal Pixel damage

REMEDY

Check power lead and mains supply connections Press Power button on TV or Standby button on remote control. Call customer help line. Ensure the input selected has an input connected to it and is turned on. Ensure aerial is connected Follow instructions on page 13/14 Have aerial signal checked. If indoor aerial it may need an outdoor aerial. Have aerial signal checked. If indoor aerial it may need an outdoor aerial. Have aerial signal checked. If indoor aerial it may need an outdoor aerial. Have aerial signal checked. If indoor aerial it may need an outdoor aerial. This is not uncommon. It is not covered by warranty No picture. Blue screen. No signal displayed Poor PC Picture

PC OPERATION

No connection from PC to TV.

PC resolution incorrectly set TV not matched to PC Check all connections carefully Enter Display setup of PC and set resolution to 800x600. Increase in steps until the required resolution is selected See page 11 and enter setup menu No or intermittent operation

REMOTE CONTROL

Exhausted batteries Replace batteries every six months or when required If you are still having difficulty please call the Technical help line. Ring 0845 293 7698 (Normal rates apply).

Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm. Sun 11am – 4pm “Bank holidays as Sun” Or try our website : www.ekey.co.uk

(24Hr) Emails should be responded to within 3 consumer have difficulty getting through.

4 hours should the

20

16. Wall Mounting

To mount the TV on a wall you need to purchase a VESA Standard (100mm) bracket.

Remove the screws as shown below (Fig 37).

Mount the wall bracket as described by the manufacturer.

Mount the TV to the wall bracket using 4 x 4mm x 10mm set screws. (Do NOT use

longer screws as the internal parts of the TV may be damaged).

Akura Ltd accepts no responsibility for damage, caused to or by, the wall bracket. incorrect mounting of

Fig 37

17. Mains Plug Wiring Diagram

Fig 38

If it becomes necessary to replace the Mains Plug, it should be wired in accordance with the diagram as in Fig 38.

The Brown wire (Live) should be connected to the terminal (L) The Blue wire (Neutral) should be connected to the terminal (N) The Green/Yellow wire (Earth) should be connected to the terminal (E).

This TV Mains adaptor is a “CLASS 1” apparatus and MUST be earthed

21

16. Specifications.

ITEM

Power Requirements TV Standby Power Mains Adaptor Screen Size Case dimensions Weight Mains adaptor weight Screen resolution Viewing angle Colour Systems Sound Systems Audio Output Tuning Firmware Inputs Outputs OSD Language Audio Wall Mounting

DESCRIPTION

12V DC @ 4.5 A Max (54W) <2W 100-240V AC 50/60 Hz 1.3A Output 12V 6A DC 21.5" (54.6cm) diagonal 533 x 398 x 197 mm inc base 4.5 Kg's 0.46 Kg,s inc Mains lead 1920x 900 pixels V 160º H 170º PAL, SECAM BG, I, DK, L 2W per channel Analog. Band 1, Band 3, UHF Digital UHF SP7050 Scart, HDMI, VGA, CVBS, L/R audio. PC Audio. Y,Pb,Pr. S-Video Scart, Headphones.

English.

Nicam stereo/Mono (Analog) Vesa Standard (100 x 100mm) Remote Control Remote Control batteries Infra Red Default code 0000 2 x "AAA" cells Specifications may be changed without notice.

22

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement