Grizzly T27948 Garage Storage 2-Door Tool Cabinet Owner Manual

Grizzly T27948 Garage Storage 2-Door Tool Cabinet Owner Manual
MODEL T27948
2-DOOR TOOL CABINET
INSTRUCTIONS
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
Inventory
The Model T27948 2-Door Tool Cabinet requires
some assembly. Follow the instructions below for
assembly, operation, and maintenance.
•
•
•
Qty
Tool Cabinet with Shelves............................ 1
Cabinet Feet................................................. 4
Keys.............................................................. 2
Assembly
The Model T27948 comes with four adjustable
feet for leveling the cabinet.
To install feet:
1.
With help from another person, lay cabinet
upside down on floor (see Figure 2).
Note: We recommend sweeping the floor
clean and laying down a piece of cardboard
or a blanket to prevent scratching the finish
during this step.
Figure 1. Model T27948.
• To reduce risk of crushing injuries from
tool cabinet tipping over on you:
— Do not stand on cabinet.
— Only move or transport cabinet with all
doors closed and locked.
— Push cabinet only (do not pull it) when
moving.
• Do not exceed weight capacities:
— Max individual shelf weight limit
is 325 lbs.
— Max total tool cabinet weight limit
(including contents) is 650 lbs.
• To prevent accidental tipping, ensure
adjustable feet are down and cabinet
body is level.
• Do not allow children to have unsupervised
access to cabinet.
2.
Install one adjustable foot in each corner (see
Figure 2).
Adjustable Feet
Figure 2. Location of adjustable feet.
3.
To prevent tipping or rocking, level the cabinet body by rotating the cabinet feet up or
down as needed.
COPYRIGHT © MARCH, 2017 BY GRIZZLY INDUSTRIAL, INC., REVISED JULY, 2017 (MN)
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 10.16) #JH18539 PRINTED IN CHINA
V1.07.17
Adjusting Doors
Installing Shelf Supports
Each 90° soft-close door hinge is riveted in place.
However, the doors may be adjusted inward or
outward, and left or right, as needed.
Each shelf comes with four shelf supports, which
fit into the channel brackets inside the cabinet
(see Figure 5), making the height of each shelf
adjustable. (Shelf supports must be mounted
evenly to function properly.)
To adjust doors:
1.
Close door and visually confirm gap spacing
around door edge is 1⁄8" all the way around
(see Figure 3).
Shelf
Support
—If door spacing is equal, no adjustments
are needed.
—If door spacing is not equal, proceed to
Step 2.
Channel
Bracket
Figure 5. Shelf support and channel bracket.
Maintenance
•
Use a soft, clean cloth and soapy water (use
regular dish soap) to remove grease, dirt, or
oil. Do not use solvents or flammable cleaning liquids.
•
Use graphite to lubricate lock annually.
⁄8" Gap
1
Figure 3. Checking door gap spacing.
2.
Adjust door hinges using screws shown in
Figure 4.
Note: Only small adjustments, such as 1⁄8
or 1⁄4 turn at a time, are required to move
door position. Check spacing after each
adjustment.
Right/Left
Adjustment
In/Out
Adjustment
Figure 4. Hinge adjustments.
-2-
T27948 Tool Cabinet (Mfd. 10/16)
Grizzly Cabinet Series
The T27948 2-Door Tool Cabinet is part of our heavy-duty 10-piece storage set. These modular cabinets
will enhance storage and workspace in the shop or garage, and they can be mixed and matched to create
a variety of storage solutions.
T27951
T27952
T27947
T27948
T27953
T27950
T27949
Parts Breakdown & List
11
15
12
16
9
5
17
1
13
6
3
10
8
14
7
6
2
4
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
2
3
4
5
6
7
8
9
CABINET BODY
ADJUSTABLE FEET M12-1.75 X 30
CABLE GROMMET
SHELF SUPPORT
SHELF
HINGE, 90-DEG SOFT-CLOSE
DOOR (RIGHT)
DOOR (LEFT)
DOOR HANDLE
10
11
12
13
14
15
16
17
DOOR HANDLE CAP
FLAT HD SCR M4-.7 X 8
LOCK W/2 KEYS
TOUCH-UP PAINT, GLOSSY BLACK
TOUCH-UP PAINT, RED
WARNING LABEL
QR CODE LABEL
GRIZZLY.COM LABEL, GOLD
PT27948001
PT27948002
PT27948003
PT27948004
PT27948005
PT27948006
PT27948007
PT27948008
PT27948009
PT27948010
PT27948011
PT27948012
PT27948013
PT27948014
PT27948015
PT27948016
PT27948017
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.
T27948 Tool Cabinet (Mfd. 10/16)
-3-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement