Commax DRC-4CPHD DOOR CAMERA Owner Manual
Add to my manuals8 Pages
Commax DRC-4CPHD is a high-quality door camera with a built-in microphone and speaker, allowing for two-way communication with visitors. It features a 1.3-megapixel CMOS sensor for crisp images and a 97° wide-angle lens for a broad field of view. The camera also has night vision capabilities with embedded LED lights, ensuring clear images even in low-light conditions. Additionally, it supports simultaneous communication, enabling multiple users to communicate with the visitor at the same time.
advertisement
▼
Scroll to page 2
of 8
User Manual Door Camera DRC-4CPHD • Thank you for purchasing COMMAX products. • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly. • The company is not responsible for any safety accidents caused by abnormal operation of the product. Contens 1. The names of Each Part Front side 1. The names of Each Part Back side 2. Wiring & Installation 3. Package 4. Specification ① ② ③ ④ ⑤ 2 Camera LED Lamp Microphone Speaker Call Button ⑥ Mounting Holes ⑦ Monitor cable ⑧ Door release cable ⑨ Volume control 2. Wiring & Installation 1. Align holes on the wall where the unit is to be installed with mounting brackets hole and secure. FIG-1 : Install the camera at a 30˚angle to the left (install the bracket in reverse to angle 30˚to the right) FIG-2 : Install the camera at a perpendicular angle to the front 2. Wire the household monitor cables as shown below with matched polarity as picture below[FIG-3] (#1:RED/VOICE, #2:BLUE/GND, #3:YELLOW/DC12V, #4:BLACK/VIDEO) 3. Wire the door release cable as shown in the diagram.[FIG-3] 4. Tighten using bolts and a wrench, then cover using the AL. screw covers. #1: RED(VOICE) #2: BLUE(GND) #3: YELLOW(+12V) #4: BLACK(VIDEO) [FIG-3] 3 [FIG-1] [FIG-2] 4 ● Please refer to the below images regarding the installation position of the product. ● You can adjust speaker volume using driver as shown below. [FIG-4] 47˚ [FIG-4] 60cm 5 3. Package 6 4. Specification Model No. Power Consumption Wiring ( Main Unit /Door Release) Sensor Type DRC-4CPHD DC 12V (Supplied from monitor) 4 wires to a monitor (polarity) 2 wires to the door release (non-polarity) CMOS 1.3 megapixel(AHD) Video Format NTSC or PAL STANDARD. Communication Simultaneous communication Minimum Illumination 0.1Lux (within 300mm / LED On) LED Effective Viewing Angle Embedded night LED (activated at night) 97°(D) Operating Temperature -10 ℃(tested up to -40°C) ~ +40 ℃ Weight (g) 415g (B/K included) Dimension (mm) 59(W) x 164(H) x 42.1(D) Distance between a door camera and monitor(Resistance under 10Ω per 100 meters on UTP Cat 5e.) Ø 0.5 UTP Warranty Period 1 year Environment Condition Storage Temperature Storage Humidity 28 meters 7 -40 °C to 50 °C Less than 90 % 513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com Printed In Korea / 2018.04.105
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project