Sennheiser MZH 3062 Instruction Manual

Add to my manuals
47 Pages

advertisement

Sennheiser MZH 3062 Instruction Manual | Manualzz

SpeechLine IS microphone series Microphone solutions for your conference | meeting room presentation

Instruction manual

Contents

Contents

Important safety information ...................................................................... 2

Sennheiser SpeechLine – True to the word ................................................ 3 Typical applications ....................................................................................... 3

Typical ways of setting up and installing microphones ......................... 4

Pick-up patterns of the microphones ........................................................ 6 Positioning the microphones ....................................................................... 6

Typical acoustic situations ........................................................................... 8

Overview of the SpeechLine IS microphone series .................................... 9

Package contents ......................................................................................... 10 Package contents of the microphones | microphone heads ............... 10

Package contents of the tables stands | floors stands | microphone mounts ............................. 11 Package contents of the inline switch box | microphone button ...... 11

Product overview ......................................................................................... 12 Overview of the MEB 114 (-S) boundary layer microphones ............. 12

Overview of the MEB 102 (-L) | MEB 104 (-L) surface-mounted boundary layer microphones .................................... 13 Overview of the MEG 14-40 (-L(-II)) gooseneck microphones ........... 13

Overview of the MZH 30xx (-L) goosenecks .......................................... 14 Overview of the MAT 133 (-S) | MAT 153-S table stands ................... 14

Overview of the MAS 133 inline switch box ........................................... 15 Overview of the MAS 1 microphone button ........................................... 15 Overview of the MZFS 60 | MZFS 80 microphone stands .................... 15

Mounting and installing the products ...................................................... 16 Planning the position of surface-mounted products ........................... 16

Mounting surface-mounted boundary layer microphones, microphone buttons, switch boxes: table | lectern ............................... 18

Mounting the gooseneck microphones: table | lectern | stand .......... 20

Mounting microphones to the ceiling ...................................................... 22

Positioning mobile microphones .............................................................. 25

Connecting the products ............................................................................. 26 Connecting the products to an audio input ............................................ 26

Connecting products via the logic function ............................................ 28

Adjusting and using the products ............................................................. 31 Adjusting the microphone sensitivity ..................................................... 31 Activating/deactivating the low-cut filter on the MEB 114 (-S) ....... 31

Setting the behavior of the microphone button ................................... 32

Activating/muting microphones .............................................................. 33

Cleaning and maintaining the products ................................................... 34

Specifications ............................................................................................... 35 Product specifications ................................................................................. 35

Pin assignment ............................................................................................. 40

Polar diagrams ............................................................................................. 41

Frequency response curves ........................................................................ 43

Manufacturer Declarations ......................................................................... 45

SpeechLine IS microphone series | 1

Important safety information

Important safety information

왘 Please read this instruction manual carefully and completely before using the products.

왘 Always include this instruction manual when passing the products on to third parties.

왘 Do not use obviously defective products.

Preventing damage to health and accidents 왘 Position and install the products so that any risk of injury to the user is eliminated. 왘 Keep the products, accessories and packaging parts out of reach of children and pets to prevent accidents and choking hazards.

Preventing damage to the product and malfunctions 왘 Always keep the products dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.

왘 Only clean the products with a soft, dry cloth. Solvents or cleansing agents can damage the surfaces of the products. 왘 Only use the products within the specifications indicated (see

page 35).

왘 Only use attachments/ accessories/ spare parts supplied or recommended by Sennheiser.

왘 Before operation, make sure that all connected third party devices are in a safe operating condition and function properly. Intended use/Liability The products of the “IS microphone series” are designed for use in meeting rooms, conference rooms and auditoriums. Some of these products can be combined with each other.

The products can be used for commercial purposes.

It is considered improper use when the products are used for any application not named in the corresponding manuals.

Sennheiser does not accept liability for damage arising from abuse or misuse of the products and their attachments/accessories.

2 | SpeechLine IS microphone series

Sennheiser SpeechLine – True to the word % %

Sennheiser SpeechLine – True to the word

The spoken word remains the most personal and powerful tool in communication. It enables us to convey and exchange messages, thoughts and opinions, as well as emotions. Therefore, when using technical devices like microphones, it is most important that no content is lost or misunderstood. The best microphone is one you don‘t have to think about while speaking, because it fully captures your voice and picks up your words as precisely as you form them. Easy operation and clear speech intelligibility are perhaps most popularly embodied in the characteristically shaped Sennheiser ME 36, which can be seen on virtually every TV news program.

The qualities of these iconic microphones can also be found in all other microphones of the versatile Sennheiser SpeechLine series. These qualities are also built into any microphone of the versatile Sennheiser SpeechLine portfolio. Wired or wireless, digital or analog, this comprehensive range of easy to integrate and unobtrusively designed microphones offer a solution for just about any situation, including yours.

In many applications, a speech microphone can help to increase the speech intelligibility or even make it possible in the first place (as in teleconferences). The following chapters describe the most common applications.

Typical applications

A) Conferences (voice lift) The larger the room, the more helpful is an audio system which enhances the speech intelligibility. Especially in large conference rooms, a speaker seated at one end is difficult to understand at the other end. Table or ceiling microphones can be used to pick up what the speaker says. The audio signal can then be spread evenly around the room using wall or ceiling loudspeakers. This application is also known as “voice lift”, i.e. the speech is amplified in the room.

B) Teleconferences If the participants of a conference are seated in different rooms, they have to be connected via telephone or remote conference circuit. As a telephone alone can only offer inadequate speech transmission for all participants in the room, table or ceiling microphones should be used in this case too.

These are connected to a telephone conference unit such as the Sennheiser TeamConnect system. This processes the signals and establishes the connection to the remote participant.

C) Presentations Especially in a presentation, in which the focus is on the transmission of content, it is important to understand every word. Here, too, the larger the room, the more necessary it is to amplify the voice. In this case, gooseneck microphones offer the speaker orientation and enhance his presentation.

SpeechLine IS microphone series | 3

Sennheiser SpeechLine – True to the word

Typical ways of setting up and installing microphones

Mobile microphones: % % Permanently installed microphones: % % A) Table Especially in conference rooms, an obvious solution is miking up the table.

Here all participants are seated around the table. Sennheiser offers mobile solutions as well as permanently installed microphones. The mobile microphones are simply placed on the table.

Mobile installation: Permanent installation: MEB 114 MEB 114-S MEB 104 MEB 104-L MEB 102 MAT 133 MAT 133-S MAT 153-S MZS 31 MZT 30-L MEB 102-L 4 | SpeechLine IS microphone series

Sennheiser SpeechLine – True to the word B) Ceiling MEB 102 MZH 30xx MZS 31 MZT 30 MZT 30-L ME 34|35|36 MZC 30 MZH 30 % % MZS 31 MEG 14-40 MZH 30xx Suspending a microphone from the ceiling is another alternative. It has the advantage that the microphones can be installed virtually invisibly in the room. Ceiling installation requires precise prior planning, as the microphones are further away from the speaker and the speech intelligibility can be impaired by noise coming from the ventilator of a projector or from an air conditioning unit.

C) Lectern A lectern is usually used for presentations. Here, too, the microphones can be positioned temporarily or installed permanently. A gooseneck microphone positions the microphone capsule close to the speaker, thus ensuring maximum speech intelligibility. Flexible gooseneck microphones prevent conflicts with laptops because they can be oriented flexibly. MZT 30 MZT 30-L MAT 133 MAT 133-S MAT 153-S MZFS 60|80 MEG 14-40 MZH 30xx D) Floor For spontaneous presentations or panel discussions, floor stands provide a solid base for a gooseneck microphone.

SpeechLine IS microphone series | 5

Sennheiser SpeechLine – True to the word MEB 102 MEB 102-L MEB 104 MEB 104-L

Pick-up patterns of the microphones

Omni-directional pick-up pattern An omni-directional pattern picks up the sound uniformly from all directions. Cardioid pick-up pattern A cardioid pattern has a wide directional characteristic, i.e. a wide opening angle. Sound hitting the rear of the microphone is attenuated very strongly.

ME 34 MEG 14-40 MEG 14-40-L ME 35 ME 36 Super-cardioid pick-up pattern A super-cardioid pattern has a slightly stronger directional characteristic than the cardioid pattern, so it suppresses noise coming from the side even more strongly but also picks up some of the sound coming from the rear.

Super-cardioid | lobar pick-up pattern A super-cardioid or lobar pattern has the strongest directional characteristic, i.e. it provides the maximum suppression of sound coming from the side, but it also picks up sound coming from the rear. However, the ratio is lower than it is with the super-cardioid pattern.

Positioning the microphones

A) Distance from the speaker Basically, the nearer a speaker is to the microphone, the higher the speech intelligibility. For this reason, gooseneck microphones are optimal from an acoustic point of view. They position the microphone capsule close to the speaker while offering excellent orientation. Boundary layer microphones do not achieve the excellent acoustic characteristics of gooseneck microphones, but they can be positioned especially unobtrusively. These microphones can be integrated into any room due to their small size and the colors they are available in. As a result of the so-called boundary layer effect, the signal picked up by the microphone capsule is amplified on a surface (for example a table or a ceiling panel). In this way, part of the distance to the speaker can be compensated for again.

B) One microphone for each speaker In the ideal case, a dedicated microphone is used for each speaker. This allows the best possible orientation and distance to the speaker to be ensured at all times. It is also possible to choose a narrower directional characteristic. This allows noise coming from the side as well as acoustic reflections to be minimized, resulting in the highest speech intelligibility.

C) “Shared microphones” - several speakers share one microphone One microphone per speaker is ideal, but one microphone shared by two speakers is often adequate for many applications. A microphone with a sufficiently wide opening angle should be selected here. The microphone can thus pick up both speakers if installed centrally before them.

6 | SpeechLine IS microphone series

Sennheiser SpeechLine – True to the word D) Typical table shapes - U-shaped, round, long, rows Depending on the configuration of the tables in a room, different microphones can be selected. In the case of a small round table, for example, a microphone with an omni-directional pick-up pattern (shown as a blue circle) is adequate to pick up all participants uniformly.

Directional microphones (shown as a semicircle) are suitable for rows of tables. These microphones minimize the sound coming from the rear and the sides. In oblong conference rooms with long tables, a combination of directional and omni-directional microphones can be a good solution.

E) Speaker is seated For conferences in which the speakers are seated, planning is easy as the distance between the speaker and the microphone is easy to estimate or measure. Here, the microphone is simply placed on the table and oriented towards the speaker. F) Speaker is standing In the case of presentations held at a lectern, the speaker is usually in a standing position. Here, the distance between lectern and mouth is virtually as large as it is with a seated speaker. In courtrooms, the speakers frequently stand up although the table in front of them is often of “normal” height. In this case, long gooseneck microphones should be used ideally in order to reduce the distance between the microphone capsule and the speaker.

SpeechLine IS microphone series | 7

Sennheiser SpeechLine – True to the word

Typical acoustic situations

A) Normally attenuated room A normally attenuated room provides an average attenuation of reflections. This is contributed to by carpets, curtains or special acoustic ceilings. In the case of reduced reflections in the room, microphones pick up less noise, which results in the highest speech intelligibility.

B) Room with amplified sound If the speech in the room is amplified by loudspeakers, this signal can enter the microphone again. This can cause echo, but in the worst case acoustic feedback can be the result. The effect can be reduced by using microphones with stronger directional characteristics. C) Large rooms with echo – acoustically challenging rooms The larger the room, the more probable is acoustic disturbance due to reflections or sound coming from loudspeakers. If the room also has many smooth surfaces such as glass fronts or smooth floors, the result is a scenario which is extremely unfavorable acoustically. In this case, only microphones with strong directional characteristics like the ME 36 can ensure speech intelligibility. For assistance in selecting suitable microphones, please visit our website at www.sennheiser.com > “IS Microphone Finder” or contact your local Sennheiser partner.

8 | SpeechLine IS microphone series

Overview of the SpeechLine IS microphone series

Overview of the SpeechLine IS microphone series

The SpeechLine IS microphone series offers microphones for different room and speech situations (with speakers in a standing or sitting position). Depending on the application, the microphones can be permanently mounted into tables or lecterns, mounted to the ceiling or simply set up somewhere.

ME 34 MEB 114-S MEB 114 TINY XLR-3 XLR-5 MEG 14-40-L MEG 14-40-L-II XLR-3 MEG 14-40 ME 36 ME 35 XLR-5 MZH 30xx-L XLR-3 MZH 30xx XLR-3 MEB 102 MEB 104 XLR-5 MEB 102-L MEB 104-L MAS 1 MAS 133 XLR-5 MAT 153-S XLR-3 XLR-3 MZS 31 XLR-5 XLR-3 MAT 133-S XLR-3 MAT 133 MZFS 60 MZFS 80 MZT 30 MZT 30-L The series comprise the following products: Microphone with XLR-5 connection Boundary layer microphones signal light ring : • • MEB 102-L MEB 104-L Gooseneck microphones with signal light ring : • • MZH 30xx-L goosenecks: MZH 3015-L, MZH 3040-L, MZH 3042-L, MZH 3062-L, MZH 3072-L with ME 34, ME 35 or ME 36 microphone head MEG 14-40-L, MEG 14-40-L-II gooseneck microphones Microphone with XLR-3 connection Boundary layer microphones: • • MEB 114 | with microphone button: MEB 114-S MEB 102 | MEB 104 Gooseneck microphones: • • MZH 30xx goosenecks: MZH 3015, MZH 3040, MZH 3042, MZH 3062, MZH 3072 with ME 34, ME 35 or ME 36 microphone head MEG 14-40 gooseneck microphone Table stands for gooseneck microphones: • with microphone button: MAT 153-S Table mounts for gooseneck microphones: • • MZS 31 MZT 30-L Floor stands for gooseneck microphones: • MZFS 60 or MZFS 80 MAS 133 inline switch box and MAS 1 microphone button for controlling a microphone Table stands for gooseneck microphones: • MAT 133 | with microphone button: MAT 133-S Table mounts for gooseneck microphones: • • MZS 31 MZT 30 SpeechLine IS microphone series | 9

Package contents

Package contents

Depending on the product purchased, the package contents includes different components.

The letters A), B) etc. stand for alternative package components.

Package contents of the microphones | microphone heads

MEB 114 | MEB 114-S A) MEB 114-S Quick Guide MZH 30xx(-L) Quick Guide Safety Guide OR B) MEB 114 Safety Guide A) MZH 30xx B) MZH 30xx (-L) OR MEG 14-40(-L(-II)) Quick Guide Safety Guide OR OR ME 34| ME 35 | ME 36 A) ME 34 B) ME 35 Instruction manual OR OR A) + B) MZW 34 C) ME 36 C) MZW 36 A) MEG 14-40 B) MEG 14-40-L C) MEG 14-40-L-II MEB 102 | MEB 102-L | MEB 104 | MEB 104-L A) MEB 102 B) MEB 102-L Quick Guide OR C) MEB 104 D) MEB 104-L Safety Guide 10 | SpeechLine IS microphone series

Package contents

Package contents of the tables stands | floors stands | microphone mounts

MAT 153-S | MAT 133-S | MAT 133 | MZTX 31 A) MAT 153-S Quick Guide B) MAT 133-S MZS 31 | MZT 30-L | MZT 30 OR C) MAT 133 Quick Guide Safety Guide OR B) MZT 30-L A) MZS 31 Safety Guide C) MZT 30 MZFS 60 | MZFS 80 MZC 30 | MZH 30 A) MZC 30 A) MZFS 60 OR Leaflet B) MZFS 80 OR B) MZH 30

Package contents of the inline switch box | microphone button

MAS 133 MAS 1 Quick Guide Quick Guide Safety Guide 132,6 mm 5.22“ 5,6 mm 0.22“ Safety Guide For more information on the complete SpeechLine IS microphone series and for the data sheets of the individual components, please visit our website at www.sennheiser.com.

For information on suppliers, contact your local Sennheiser partner: www.sennheiser.com > “Service & Support” SpeechLine IS microphone series | 11

Product overview

Product overview

The pin assignment of the products can be found on page 40.

Overview of the MEB 114 (-S) boundary layer microphones

A MEB 114 1 2 B MEB 114-S 1 2 1 Microphone 2 TINY-XLR-3 socket 3 Low cut filter 3 6 4 5 3 4 Slide switch for setting the behavior of the microphone button 5 Logic port 6 Microphone button with signal light ring (red/green) 12 | SpeechLine IS microphone series

Product overview

Overview of the MEB 102 (-L) | MEB 104 (-L) surface-mounted boundary layer microphones

A MEB 102 1 2 B MEB 102-L 1 3 2 3 4 C MEB 104 1 2 XLR-3 D MEB 104-L 1 XLR-5 4 2 3 1 Microphone head 2 Threaded bolt Variants A MEB 102 B MEB 102-L C D MEB 104 MEB 104-L 3 3 Connection socket, XLR 4 Signal light ring (red/green) Features omni-directional omni-directional, with signal light ring cardioid, acoustically directional cardioid, acoustically directional, with signal light ring

Overview of the MEG 14-40 (-L(-II)) gooseneck microphones

A MEG 14-40 1 B MEG 14-40-L MEG 14-40-L II 1 3 2 1 Microphone head 2 Connection socket, XLR XLR-3 XLR-5 2 3 Signal light ring – red: MEG 14-40-L – green: MEG 14-40-L II Variant A MEG 14-40 B Features cardioid, acoustically directional MEG 14-40-L (-II) cardioid, acoustically directional, with signal light ring SpeechLine IS microphone series | 13

Product overview 14 | SpeechLine IS microphone series

Overview of the MZH 30xx (-L) goosenecks

A MZH 30xx 1 1 XLR-3 B MZH 30xx-L 1 1 3 XLR-5 3 2 2 2 2 1 Thread for ME 34/35/36 microphone heads 2 Connection socket, XLR 3 Signal light ring (red/green) Microphone head Features ME 34 cardioid, acoustically directional ME 35 ME 36 super-cardioid, acoustically directional super-cardioid/lobar, acoustically directional

Overview of the MAT 133 (-S) | MAT 153-S table stands

A MAT 133 1 3 B MAT 153-S 2 3 C MAT 133-S 1 3 4 1 Socket for gooseneck microphone, XLR-3 2 Socket for gooseneck microphone, XLR-5 3 Connection socket, XLR-3 4 MAT 133-S MAT 153-S 5 6 4 Microphone button with signal light ring (red/green) 5 Logic port 6 Slide switch for setting the behavior of the microphone button

Product overview

Overview of the MAS 133 inline switch box

1 1 2 3 1 Mounting brackets 2 mic in microphone input, XLR-3F 3 mic out microphone output, XLR-3M 6 4 5 4 switch socket for MAS 1 microphone button, XLR-5F 5 Slide switch for setting the behavior of the microphone button 6 logic out output

Overview of the MAS 1 microphone button

1 2 3 1 Microphone button 2 Signal light ring (red/green) 3 Socket for inline switch box, XLR-5M

Overview of the MZFS 60 | MZFS 80 microphone stands

1 2 1 Microphone connection, XLR-3F 2 Connection socket, XLR-3M SpeechLine IS microphone series | 15

Mounting and installing the products

Mounting and installing the products

Planning the position of surface-mounted products

Planning the position of surface-mounted microphones| microphone buttons | inline switch boxes on tables and lecterns % % MAS 1 MZT 30 MAS 133 MZS 31 MZT 30-L MEB 102 왘 Choose the positions of surface-mounted microphones, microphone buttons, table mounts, shock mounts and inline switch boxes on e.g.

lecterns or conference tables so that – the speakers don‘t hit their knees when sitting down, – the distance between speaker and microphone is between 30 cm to 80 cm (best possible speech quality), – the microphone buttons are easy to reach for the speakers and – no disruptive objects, sources of disturbance (e.g. telephones or PC fans) or movable parts are in close proximity to the microphones.

MEB 104 MEB 104-L MEB 102-L min. 30 cm max. 80 cm microphone (XLR-3) e.g. MEB 1xx MAS 1 MAS 133 16 | SpeechLine IS microphone series

Mounting and installing the products Planning the position of microphones | microphones accessories on a ceiling % % MZH 30xx-L MZS 31 ME 34|35|36 MZH 30 MEB 102 MZT 30 To mount the product to a ceiling panel or wooden board: 왘 Choose the positions of the microphones or flush mounts on the ceiling so that – they are located directly above or in close proximity to the speaker, – neither the speaker nor other persons can hit their heads on the microphones or can get caught in hanging cables.

왘 When ceiling mounting, observe the applicable fire protection requirements for the building.

MZC 30 SpeechLine IS microphone series | 17

Mounting and installing the products MEB 102 MEB 102-L

Mounting surface-mounted boundary layer microphones, microphone buttons, switch boxes: table | lectern

Drilling a hole through the surface of the table or lectern

Once you have chosen a position for the product (see page 16):

왘 Drill a hole with a diameter of 25 mm through the mounting surface (plate thickness: 10 mm - 65 mm).

MAS 1 MEB 104 MEB 104-L 25 mm MEB 102 MEB 102-L 10 mm – 65 mm Mounting the MEB 102 (-L) | MEB 104 (-L) boundary layer microphones 1 2 Slide the first rubber ring over the threaded bolt of the microphone and then insert the microphone into the drilled hole.

Orient the MEB 104 and MEB 104-L microphones towards the speaker.

Slide the second rubber ring over the threaded bolt and tighten the hex nut.

1 2 MEB 104 | MEB 104-L MEB 104 MEB 104-L MAS 1 Mounting the MAS 1 microphone button 1 2 Slide the first rubber ring over the threaded bolt of the microphone button and then insert the microphone into the drilled hole.

Slide the second rubber ring over the threaded bolt and tighten the hex nut.

1 2 18 | SpeechLine IS microphone series

Mounting and installing the products MAS 133 Mounting the MAS 133 inline switch box 왘 If necessary, change the position of the mounting brackets by loosening the screws and removing the covers from the drilled holes.

Attach the mounting brackets to the desired position and replace the covers.

왘 Use the drilling template (see supplement) to mark the position of the screws.

왘 Attach the inline switch box using the supplied recessed head screws. 10 mm – 65 mm SpeechLine IS microphone series | 19

Mounting and installing the products

Mounting the gooseneck microphones: table | lectern | stand

You can mount the gooseneck microphones: A) to mobile table stands, B) to floor stands and C) to surface-mounted table mounts or shock mounts.

XLR-3 MEG 14-40 MZH 30xx XLR-5 MEG 14-40-L MZH 30xx-L XLR-5 MEG 14-40-L-II Accessories Accessories Accessories Accessories MAT 133-S MAT 133 MZS 31 MZT 30-L Mounting the microphone MZT 30 MAT 153-S ME 34|35|36 MZH 30xx MZH 30xx-L MZFS 60 MZFS 80 Mounting the ME 3x microphone head onto the MZH gooseneck 왘 Tightly screw one of the microphone heads onto the gooseneck in order to ensure a reliable ground connection.

ME 34 ME 36 MZH 30xx MZH 30xx (-L) ME 35 MZH 30xx-L MEG 14-40 MEG 14-40-L-II A) Mounting the MEG/MZH gooseneck microphone onto the MAT table stand 왘 Connect the XLR connector of the gooseneck microphone to the corresponding socket of the table stand.

왘 Orient the microphone towards the speaker.

MAT 133 MAT 133-S MAT 153-S XLR-3 MZH 30xx MEG 14-40 XLR-5 MEG 14-40-L-II MAT 133-S MAT 133 MAT 153-S 20 | SpeechLine IS microphone series

Mounting and installing the products MZH 30xx MEG 14-40 B) Mounting the MEG/MZH gooseneck microphone to the MZFS floor stand 왘 Connect the XLR connector of the gooseneck microphone to the corresponding socket of the floor stand.

XLR-3 MEG 14-40 MZH 30xx MZFS 60|80 MZFS 60 MZFS 80 MZH 30xx-L MEG 14-40-L MEG 14-40-L-II MZS 31 MZT 30 MZT 30-L C) Mounting the MEG/MZH gooseneck microphone to the MZT table mount/MZS shock mount

Once you have chosen a position for the product (see page 16):

1 Drill a hole with the following diameter through the mounting surface (plate thickness 10 mm - 65 mm): – 24 mm for the MZT 30 (-L) table mount – 51 mm for the MZS 31 shock mount 1 MZT 30 MZT 30-L 24 mm MZS 31 51 mm 10 mm – 65 mm 2 3 Insert the table mount or the shock mount into the drilled hole.

Connect the XLR connector of the gooseneck microphone to the corresponding socket of the MZT 30 (-L) table mount/MZS 31 shock mount.

2 3 MZT 30 MZS 31 MZT 30-L SpeechLine IS microphone series | 21

Mounting and installing the products MZH 30xx-L MZS 31 ME 34|35|36 MZH 30 MEB 102

Mounting microphones to the ceiling

Some microphones of the IS series can also be mounted to a ceiling panel or wooden board of a suspended ceiling.

A B + MZT 30 MEB 102 XLR-3 MZH 3015w MZT 30 C MZC 30 MZT 30 + MZC 30 + MZH 30 + ME 36 ME 34 ME 35 A) Mounting the MEB 102 boundary layer to the ceiling

Once you have chosen a position for the product (see page 16):

왘 Drill a hole with a diameter of 25 mm through the ceiling panel or wooden board (plate thickness 10 mm - 65 mm).

10 mm – 65 mm 25 mm 왘 Slide the first rubber ring over the threaded bolt of the microphone button and then insert the microphone into the drilled hole.

왘 Slide the second rubber ring over the threaded bolt and tighten the hex nut.

22 | SpeechLine IS microphone series 왘

Connect a suitable cable (see page 26) and lay the cable.

Mounting and installing the products ME 34|35|36 MZH 30xx B) Mounting the MZH 3015 w gooseneck microphone to the ceiling 왘 Tightly screw one of the microphone heads onto the gooseneck in order to ensure a reliable ground connection.

ME 34 MZS 31 MZT 30 ME 36 MZH 30xx MZH 30xx (-L) ME 35

Once you have chosen a position for the product (see page 16):

왘 Drill a hole with the following diameter through the mounting surface (plate thickness 10 mm - 65 mm): – 24 mm for the MZT 30 table mount – 51 mm for the MZS 31 shock mount 10 mm – 65 mm 24 mm 51 mm MZT 30 MZS 31 왘 왘 Insert the table mount or the shock mount into the drilled hole.

Connect the XLR connector of the gooseneck microphone to the corresponding socket of the MZT 30 table mount/MZS 31 shock mount.

MZS 31 MZT 30 왘

Connect a suitable cable (see page 26) and lay the cable.

SpeechLine IS microphone series | 23

Mounting and installing the products ME 34|35|36 MZH 30 MZC 30 MZT 30 C) Ceiling-mounting a ME 3x microphone

Once you have chosen a position for the product (see page 16):

왘 Drill a hole with a diameter of 24 mm through the mounting surface (plate thickness 10 mm - 65 mm).

10 mm – 65 mm MZT 30 24 mm 왘 왘 Insert the table mount into the drilled hole.

Connect the XLR connector of the MZC 30 cable to the corresponding socket of the MZT 30 table mount.

MZC 30 MZT 30 왘 왘 Guide the cable through the MZH 30 metal ceiling hanger.

Tightly screw one of the microphone heads onto the special coax socket of the cable in order to ensure a reliable ground connection.

ME 34 MZC 30 MZH 30 ME 36 ME 35 왘

Connect a suitable cable (see page 26) and lay the cable.

MZC 30 24 | SpeechLine IS microphone series

Mounting and installing the products

Positioning mobile microphones

% % MEB 114 MEB 114-S MAT 133 MAT 133-S MAT 153-S Positioning tabletop boundary layer microphones/gooseneck microphones attached to a table stand 왘 Choose the positions of the microphone so that – the distance between speaker and microphone is between 30 cm to 80 cm (best possible speech quality) and – no disruptive objects, sources of disturbance (e.g. PC fans) or movable parts are in close proximity to the microphones. 왘 Orient the gooseneck microphones towards the speaker.

MEG 14-40 (-L (-II)) MZH 30xx (-L) MEB 114-S MEB 114 min. 30 cm max. 80 cm MZFS 60|80 Positioning gooseneck microphones attached to a stand 왘 Position the stand with the microphone so that the distance between speaker and microphone is between 30 cm to 80 cm (best possible speech quality).

왘 Orient the gooseneck microphones towards the speaker.

MZH 30xx min. 30 cm max. 80 cm MEG 14-40 SpeechLine IS microphone series | 25

Connecting the products

Connecting the products

MEB 114 MZT 30 MAT 133 MEB 114-S MZT 30-L MZS 31 MEB 102 MEB 104 MEB 104-L MEB 102-L MAT 133-S MAT 153-S

Connecting the products to an audio input

There are two ways to connect the products of the SpeechLine IS microphone series to a suitable audio input: A) Connection to a mixing console, an auto mixer or a digital signal processor (DSP) using shielded cables B) Connection to a mixing console via the MAS 133 inline switch box and the MAS 1 microphone button using shielded XLR cables A) Connecting a microphone to a mixing console | an auto mixer | a digital signal processor (DSP) 왘 Use a suitable shielded cable (e.g. XLR-XLR, XLR-terminal) to connect the microphone to the mixing console, the auto mixer or the DSP. For more information on the connections, refer to the instruction manual of your DSP. 왘 Lay all cables in such a way that other persons cannot trip over them and injure themselves.

MEB 114 MEB 114-S MAT 133 MAT 133-S MAT 153-S TINY XLR-3 XLR-3 XLR-3 cable not included MEB 102 MEB 102-L MEB 104 MZH 30xx MEB 104-L MZH 30xx-L MEG 14-40 MEG 14-40L 26 | SpeechLine IS microphone series

Connecting the products MAS 1 MAS 133 MEB 102 MEB 102-L MEB 104 MEB 104-L MZH 30xx MEG 14-40 B) Connecting a microphone | the MAS 133 inline switch box | the MAS 1 microphone button to a mixing console 왘 Use a shielded XLR-3 cable to connect the MAS 1 microphone button to the MAS 133 inline switch box ( switch socket). 왘 Use a shielded XLR-3 cable each to connect the MAS 133 inline switch box to: – the microphone (MAS 133: mic in socket) and – the mixing console (MAS 133: mic out socket).

microphone (XLR-3) e.g. MEB 1xx MAS 1 MAS 133 SpeechLine IS microphone series | 27

Connecting the products MEB 114-S MAT 133-S MAS 133 MAT 153-S MAS 133

Connecting products via the logic function

Once you have established the audio connection (see previous chapter), you can connect the products of the IS microphone series featuring a logic port (shown on the left) to the DSP. The logic port passes on status information on the microphone button (microphone button pressed/not pressed) to the DSP. Via the logic output of the DSP, you can additionally control the status of the signal light ring of the microphone button.

The logic output also allows you to integrate and control several MAS 133 inline switch boxes in a system.

The following chapters provide A) information on how to connect the MAS 133 inline switch box to a DSP B) information on how to connect microphones C) an example installation for the Sennheiser TeamConnect system A) Connecting the MAS 133 inline switch box to the DSP via the logic function The way you connect the MAS 133 inline switch box determines which information is passed on to the DSP. Logic port Function Passes on status information on the microphone button – button pressed/not pressed– to the DSP.

Passes on microphone status information – microphone activated/muted – to the DSP.

왘 Use a 2-wire cable (Ø 0.14–0.5 mm 2 ) to connect the inline switch box to a GPIO port or logic port of the DSP.

왘 Lay all cables in such a way that other persons cannot trip over them and injure themselves.

왘 Observe the connection instructions in the instruction manual of your DSP.

DSP logic MAS 133 Switch signal out DSP control 28 | SpeechLine IS microphone series

Connecting the products B) Connecting microphones to a DSP with logic function To establish a logic connection in addition to the audio connection: 왘 Use a 3-wire cable (Ø 0.14–0.5 mm 2 ) to connect the microphone or the table stand to a GPIO port or logic port of the DSP.

왘 Lay all cables in such a way that other persons cannot trip over them and injure themselves.

왘 Observe the connection instructions in the instruction manual of your DSP.

DSP logic MEB 114-S MAT 133-S MAT 153-S Logic in Ground Logic out 왘 Set the slide switch for setting the behavior of the microphone button to ON in order to activate the “DSP remote mode”.

In “DSP remote mode”, the microphone is permanently on and is muted or activated via the DSP. The microphone thus permanently provides a reference signal for AEC algorithms in the DSP.

MAT 133-S MAT 153-S ON PTM PTT ON OFF MEB 114-S SpeechLine IS microphone series | 29

Connecting the products Audio Logic C) Example installation for the Sennheiser TeamConnect system Example installation with an XLR-3 microphone Audio MEB 114-S Sennheiser SL TeamConnect CB1 Logic Sennheiser SL TeamConnect CU1 CB1 CU1 Example installation with an XLR-5 microphone and signal light rings external power supply* 1 2 3 4 5 MEB 102-L MEB 104-L H -> green L -> red 1 2 3 4 5 MAS 1 CU1 +12 V DC * not included CB1 30 | SpeechLine IS microphone series

Adjusting and using the products MEB 114 MEB 114-S

Adjusting and using the products

Adjusting the microphone sensitivity

왘 Use the mixing console, the auto mixer or the DSP to adjust the microphone sensitivity so that over- or under-modulation is avoided.

For more information on the audio settings, refer to the instruction manual of the corresponding device. If interference occurs at high field strengths, remove the source of interference from the microphone.

Activating/deactivating the low-cut filter on the MEB 114 (-S)

A table or lectern transfers the sound produced when a speaker accidentally stumbles against it. The low-cut filter reduces low-frequency noise by filtering out frequencies below 120 Hz.

왘 Set the slide switch to the desired position: Low-cut filter is deactivated Low-cut filter is activated SpeechLine IS microphone series | 31

Adjusting and using the products MEB 114-S MAT 133-S

Setting the behavior of the microphone button

The products shown on the left feature a slide switch that allows you to directly set the behavior of the microphone button.

왘 Set the slide switch to the desired position.

MAS 133 MAT 153-S MAT 133-S MAT 153-S ON PTM PTT ON OFF MEB 114-S Position MAS 133 Function ON/OFF : When you press the microphone button, the microphone is: – activated (lights up green) or – muted (lights up red).

PTM – Push To Mute: The microphone is activated, the microphone button lights up green. The microphone button will light up red and the microphone will be muted for as long as you keep the microphone button pressed.

PTT – Push To Talk: The microphone is muted, the microphone button lights up red. The microphone button will light up green and the microphone will be activated for as long as you keep the microphone button pressed.

ON : • • Protection against accidental operation : The microphone is permanently activated. This setting prevents interruptions due to accidental operation of the microphone button.

DSP remote mode: The microphone is connected to a DSP via a logic port. In this case, the functions ON, OFF, PTT and PTM can be performed by the DSP.

32 | SpeechLine IS microphone series

Adjusting and using the products MEG 14-40 MEG 14-40-L-II MZH 30xx MEB 114-S MAS 1

Activating/muting microphones

The products shown on the left have LEDs that indicate whether the microphone is muted or activated. The LEDs light up as soon as the products are powered via the mixing console, the auto mixer or the DSP.

Whether a microphone is permanently activated or muted or whether it can be activated or muted by pressing the microphone button depends on the setting of the slide switch that sets the behavior of the microphone

button (see page 32). When the slide switch is set to

ON , the microphone is permanently activated and the microphone button is deactivated.

왘 Press the microphone button, the LED lights up: ... green Microphone is active ... red* Microphone is muted MEB 114-S MAT 133-S + MZH 30xx + MEG 14-40 MAS 1 MAT 153-S + MEG 14-40-L-II * This function is not supported by all mixing consoles, auto mixers and DSPs.

The signal light rings of the microphones light up synchronously with the signal light rings of the microphone buttons.

SpeechLine IS microphone series | 33

Cleaning and maintaining the products

Cleaning and maintaining the products

CAUTION

Liquids can damage the electronics of the products!

Liquids entering the housing of the product can short-circuit the electronics.

왘 왘 Keep all liquids far away from the product.

Do not use any solvents or cleansing agents.

왘 Clean the products with a soft, dry cloth.

34 | SpeechLine IS microphone series

Specifications

Specifications

Product specifications

Boundary layer microphones Pick-up pattern Frequency response Acoustic principle Switch for behavior of the microphone button Cut-off frequency Output impedance at 1kHz Sensitivity Max. sound pressure level Equivalent noise level A-weighted as per DIN IEC 61672 Power supply Current consumption Logic input Logic output Connector Weight Dimensions (W x H x D) Temperature MEB 114 MEB 114-S MEB 114 – MEB 114-S cardioid 40 – 20,000 Hz boundary layer microphone ON | PTM | PTT | ON/OFF 120 Hz 200 Ω 10 mV/Pa 140 dB at 1 kHz 29 dB(A) 24 – 48 V phantom power (P 24 – P 48) 1,5 mA 5.3 mA (microphone/signal light ring: 2.65 mA each) – high level input voltage > 2.0 V low level input voltage < 0.8 V – tiny XLR-3M high level output voltage > 2.4 V low level output voltage < 0.4 V tiny XLR-3M | 3 x terminal approx. 286 g 85 mm x 25 mm x 100 mm operation: –10 °C (14 °F) to +50 °C (122°F) storage: –25 °C (–13°F) to +70 °C (158°F) SpeechLine IS microphone series | 35

Specifications Surface-mounted boundary layer microphones Pick-up pattern Frequency response Acoustic principle Output impedance at 1kHz Sensitivity Max. sound pressure level Equivalent noise level A-weighted as per DIN IEC 61672 Power supply Current consumption Connector Weight Dimensions Temperature MEB 102 MEB 102 MEB 102-L MEB 102-L MEB 104 MEB 104 omni-directional cardioid 40 – 20,000 Hz 16 mV/Pa boundary layer microphone 200 Ω 14 mV/Pa 125 dB at 1 kHz < 3% 21 dB (A) 28 dB (A) MEB 104-L MEB 104-L 3 mA 24 – 48 V phantom power (P 24 – P 48) 6 mA (microphone/ signal light ring: 3 mA each) 3 mA XLR-5M XLR-3M 6 mA (microphone/ signal light ring: 3 mA each) XLR-5M XLR-3M approx. 59 g installation height: approx. 12 mm total height: approx. 83 mm approx. 60 g installation height: approx. 19 mm total height: approx. 90 mm Ø microphone head: approx. 29 mm Ø threaded bolt: approx. 20 mm thread size: M20 x 1.5

Ø rubber rings: approx. 23 mm operation: –10 °C (14 °F) to +50 °C (122°F) storage: –25 °C (–13°F) to +70 °C (158°F) Gooseneck microphones Pick-up pattern Acoustic principle Power supply Current consumption Connector Temperature MZH 30xx MZH 30xx-L MZH 30xx MZH 30xx-L depending on ME 3x mic head gooseneck microphone (condenser) 3 mA 12 V – 48 V phantom power (P 12 – P 48) 18 mA (microphone/signal light ring: 9 mA each) XLR-3M XLR-5M operation: 0 °C (32 °F) to +40 °C (104 °F) storage: –25 °C (–13°F) to +70 °C (158°F) 36 | SpeechLine IS microphone series

Specifications Gooseneck microphones Pick-up pattern Frequency response Acoustic principle Output impedance at 1kHz Sensitivity Max. sound pressure level Equivalent noise level Power supply Current consumption Power supply signal light ring Connector Temperature MEG 14-40 MEG 14-40-L MEG 14-40-L-II MEG 14-40 MEG 14-40-L cardioid 50 – 20,000 Hz MEG 14-40-L-II gooseneck microphone (condenser) < 100 Ω 15 mV/Pa 130 dB at 1 kHz < 3% 37 dB (CCIR) 26 dB (A) 12 V – 48 V phantom power (P 12 – P 48) 3 mA – 9 – 30 V DC approx. 18 mA red 12 – 30 V DC 1 – 18 mA green XLR-3M XLR-5M operation: 0 °C (32 °F) to +40 °C (104 °F) storage: –25 °C (–13°F) to +70 °C (158°F) Microphone heads Pick-up pattern Frequency response Acoustic principle Sensitivity Electrical impedance Min. terminating impedance Equivalent noise level Power supply via MZH 30xx Current consumption microphone Dimensions (W x H x D) Weight without MZH 30xx Connector Temperature ME 34 ME 35 ME 36 ME 34 cardioid 40 – 20.000 Hz pressure gradient transducer ME 35 super-cardioid 50 – 20.000 Hz pressure gradient transducer 10 mV/Pa ME 36 hyper-cardioid/lobar 40 – 20.000 Hz pressure gradient transducer/ interference tube transducer 18 mV/Pa 50 Ω 1 Ω 37 dB (CCIR) 26 dB (A) 34 dB (CCIR) 23 dB (A) 12 V – 48 V phantom power (P 12 – P 48) 250 μ A Ø 12 x L18 Ø 8.2 x L96 9.5 g 17 g special coax connector operation: –10 °C (14 °F) to +50 °C (122°F) storage: –25 °C (–13°F) to +70 °C (158°F) SpeechLine IS microphone series | 37

Specifications MAS 133 inline switch box MAS 133 Power supply Slide switch for setting the behavior of the microphone button Logic output Connections Weight Dimensions (W x H x D) Temperature 48 V phantom power (P48) via MIC IN ON | PTM | PTT | ON/OFF high level output voltage > 2.4 V | low level output voltage < 0.4 V MIC IN : XLR-3F | MIC OUT : XLR-3M | SWITCH : XLR-5F | 3x terminal approx. 212 g approx. 150 x 44 x 44 mm operation: –10 °C (14 °F) to +50 °C (122°F) storage: –25 °C (–13°F) to +70 °C (158°F) MAS 1 microphone button Power supply Current consumption Connection Weight Dimensions Temperature MAS 1 12 V (max. 1.5 mA) signal light ring: 3 mA XLR-5M approx. 59 g total height: approx. 81 mm installation height: approx. 8 mm Ø-head of microphone button: approx. 29 mm Ø-threaded bolt: approx. 20 mm Ø-rubber rings: approx. 23 mm thread size: M20 x 1.5

operation: –10 °C (14 °F) to +50 °C (122°F) storage: –25 °C (–13°F) to +70 °C (158°F) 38 | SpeechLine IS microphone series

Specifications MAT 133 MAT 133-S MAT 153-S Table stands Current consumption Slide switch for setting the behavior of the microphone button Logic input Logic output Connector Power supply Weight Dimensions (W x H x D) Temperature MAT 133 1.9 mA – MAT 133-S 3.7 mA MAT 153-S ON | PTM | PTT | ON/OFF MIC IN : XLR-3F MIC OUT – – : XLR-3M high level input voltage > 2.0 V low level input voltage > 0.8 V high level output voltage > 2.4 V low level output voltage > 0.4 V MIC IN : XLR-3F MIC OUT : XLR-3M 3 x terminal MIC IN : XLR-5F MIC OUT : XLR-3M 3 x terminal approx. 1200 g 48 V phantom power (P 48) approx. 1206 g 120 mm x 43 mm x 170 mm operation: –10 °C (14 °F) to +50 °C (122°F) storage: –25 °C (–13°F) to +70 °C (158°F) MZS 31 MZT 30 MZT 30-L Shock mount/table mounts Connector Power supply Weight Dimensions (W x H x D) Temperature MZS 31 – MZT 30 XLR-3F 48 V phantom power (P 48) approx. 1206 g MZT 30-L XLR-5F approx. 1200 g 120 mm x 43 mm x 170 mm operation: –10 °C (14 °F) to +50 °C (122°F) storage: –25 °C (–13°F) to +70 °C (158°F) MZC 30 connection cable for ceiling mounting Connections Power supply Length Diameter MZC 30 XLR-3M | special coax socket for ME 3x 12 – 48 V phantom power (P 12 – P 48) 9 m Ø 1.1 mm In compliance with Europe EMC: • • EN 55103-1 EN 55103-2 In case of interference from extraneous devices, the specifications may differ from those listed above.

SpeechLine IS microphone series | 39

Specifications

Pin assignment

MEB 102 | MEB 104: XLR-3 1 2 MEB 102-L | MEB 104-L: XLR-5 3 1 Ground 2 Microphone + 3 Microphone – MEB 102 MEB 104 1 5 2 4 MEB 102-L 3 1 Ground 2 Microphone + 3 Microphone – 4 LED (H -> green, L -> red) 5 LED (H -> red) MEB 104-L MEG 14-40-L | MZH 30xx-L: XLR-5 MEG 14-40 | MZH 30xx: XLR-3 1 2 3 1 Ground 2 Microphone + 3 Microphone – MEG 14-40 MZH 30xx MEG 14-40-L-II: XLR 5 MEB 114: XLR 3 1 2 1 5 2 4 MEG 14-40-L MZH 30xx-L 3 1 Ground 2 Microphone + 3 Microphone – 4 LED: 9 – 30 V DC any polarity 5 LED: 9 – 30 V DC any polarity MAS 1: XLR 3 mic in 1 5 2 4 3 1 Microphone Ground 2 Microphone + 3 Microphone – 4 LED Ground 5 LED: 12 – 30 V MEG 14-40-L-II 3 1 Ground 2 Microphone + 3 Microphone – MEB 114 1 2 5 4 MAS 1 3 red green +12 V 1 2 3 4 5 Switch Switch red green LEDs +12 V MAS 133: XLR 3 mic in 1 2 MAS 133: XLR 3 mic out 1 2 MAS 133: XLR 5 switch 3 1 Ground 2 Microphone + 3 Microphone – MAS 133 3 1 Microphone – 2 Microphone + 3 Ground 1 2 4 3 1 Ground 2 Switch 3 LED red – 4 LED green – 5 LEDs +12 V 5 40 | SpeechLine IS microphone series

Specifications

Polar diagrams

MEB 102 MEB 104 MEB 102-L MEB 104-L MEB 114 MEB 114-S MEG 14-40 MEG 14-40L MEG 14-40-L-II MEB 102 MEB 102-L 30° 60° 0° 330° 300° 90° 270° 90° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 180° MEB 104 MEB 104-L 0° 30° 210° 330° 60° 240° 300° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 270° 90° 120° 240° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 180° MEB 114 MEB 114-S 0° 30° 210° 330° 60° 300° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 270° 120° 240° 150° 30° 180° 0° 210° 330° 90° 60° 300° 270° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 180° MEB 114 MEB 114-S 210° 240° 2000 Hz 4000 Hz 8000 Hz 16000 Hz SpeechLine IS microphone series | 41

Specifications ME 34 ME 35 ME 36 30° 0° 330° 60° 300° 270° 90° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 30° 60° 180° ME 34 0° 210° 330° 240° 300° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 90° 270° 90° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 30° 180° ME 35 0° 60° 210° 330° 240° 300° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 270° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 150° 180° ME 36 210° 240° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 42 | SpeechLine IS microphone series

Specifications

Frequency response curves

MEB 102 MEB 102-L -50 -60 0 ° 90 ° -70 dB -20 MEB 104 -30 -40 MEB 104-L -50 -60 0 ° 90 ° -70 dB -30 dB -20 -30 -40 -40 -50 MEB 114 -60 MEB 114-S -70 -80 0 ° 90 ° -90 dB -20 MEG 14-40 -30 -40 MEG 14-40-L-II MEG 14-40L -50 -60 0 ° 90 ° -70 100 Hz 200 Hz 100 Hz 200 Hz 100 Hz 200 Hz 100 Hz 200 Hz 500 Hz 1 kHz 2 kHz 500 Hz 1 kHz 2 kHz 500 Hz 1 kHz 2 kHz 500 Hz 1 kHz 2 kHz 5 kHz 10 kHz 20 kHz 5 kHz 10 kHz 20 kHz 5 kHz 10 kHz 20 kHz 5 kHz 10 kHz 20 kHz SpeechLine IS microphone series | 43

Specifications dB -20 ME 34 -30 -40 -50 -60 0 ° 90 ° -70 dB -20 ME 35 -30 -40 -50 -60 0 ° 90 ° -70 dB -20 ME 36 -30 -40 -50 -60 0 ° 90 ° -70 50 Hz 100 Hz 200 Hz 500 Hz 1 kHz 2 kHz 5 kHz 10 kHz 20 kHz 50 Hz 50 Hz 100 Hz 100 Hz 200 Hz 200 Hz 500 Hz 1 kHz 500 Hz 1 kHz 2 kHz 2 kHz 5 kHz 5 kHz 10 kHz 10 kHz 20 kHz 20 kHz 44 | SpeechLine IS microphone series

Manufacturer Declarations

Manufacturer Declarations

Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.

In compliance with the following requirements • • WEEE Directive (2012/19/EU) Please dispose of the products at the end of their operational lifetime by taking them to your local collection point or recycling center for such equipment.

Australia/New Zealand CE Conformity • • RoHS Directive (2011/65/EU) EMC Directive (2014/30/EU) The declaration is available at www.senncom.com. Before putting the products into operation, please observe the respective country-specific regulations!

SpeechLine IS microphone series | 45

Sennheiser electronic GmbH & Co. KG

Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Publ. 02 /1 5 , 55466 5 , A0 4

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents