Sennheiser SK 100 G4 Instruction Manual

Sennheiser SK 100 G4 Instruction Manual
evolution wireless G4
100 P series
Instruction Manual
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
ew 100 P G4 - v2.0
Overview 6
ew 100 P G4 series products 7
EK 100 G4 diversity receiver 8
SKM 100 G4 handheld transmitter 9
SK 100 G4 bodypack transmitter 10
SKP 100 G4 plug-on transmitter 11
Accessories 12
Microphones and cables 13
Microphone modules 13
Headset and Lavalier microphones 13
Line connecting cable 15
Rechargeable battery and charger 16
BA 2015 rechargeable battery 16
L 2015 charger 16
Accessories for camera mounting 17
CA 2 camera adapter 17
Additional accessories 18
Color labeling set 18
Microphone clamp 18
The frequency bank system 19
Installing ew 100 P G4 series devices 20
Installing the EK 100 G4 21
Inserting and removing the batteries/rechargeable batteries 21
Battery status 22
Attaching the diversity receiver to a camera 23
Connecting the diversity receiver to a camera 26
Installing the SKM 100 G4 28
Inserting and removing the batteries/rechargeable batteries 29
Battery status 30
Replacing the microphone module 31
Changing the colored ring 32
Installing the SK 100 G4 33
Inserting and removing the batteries/rechargeable batteries 34
Battery status 35
Connecting a microphone to the SK 100 G4 36
Connecting an instrument or line source to the SK 100 G4
37
Attaching the bodypack transmitter to clothing 38
Installing the SKP 100 G4 39
Inserting and removing the batteries/rechargeable batteries 40
Battery status 41
Attaching the plug-on transmitter to the microphone 42
Using ew 100 P G4 series devices 43
Using the EK 100 G4 45
Operating elements of the EK 100 G4 diversity receiver
46
1
Switching the EK 100 G4 on and off 47
Lock-off function 48
Displays on the EK 100 G4 display panel 49
Buttons for navigating through the menu 50
Home screen 52
Frequency/Name standard display 52
Frequency Bank/Channel/Name standard display 53
Setting options in the menu 54
Menu structure 55
Sync menu item 56
Squelch menu item 57
Easy Setup menu item 59
Frequency Preset menu item 61
Name menu item 62
AF Out menu item 63
Auto Lock menu item 64
Advanced menu item 65
Advanced -> Tune menu item 66
Only adjusting the frequency 66
Setting the channel and frequency 66
Advanced -> Pilot Tone menu item 66
Advanced -> LCD Contrast menu item 67
Advanced -> Reset menu item 67
Advanced -> Software Revision menu item 67
Using the SKM 100 G4 68
Operating elements of the SKM 100 G4 handheld transmitter 69
Switching the SKM 100 G4 handheld transmitter on and
off 70
Muting the handheld transmitter (AF mute) 71
SKM 100 G4 71
SKM 100 G4-S 71
Deactivating the RF signal (RF mute) 72
Lock-off function 73
Displays on the SKM 100 G4 handheld transmitter display panel 74
Select a standard display 75
Buttons for navigating the SKM 100 G4 menu 76
Navigating through the menu 76
Making changes in a menu item 76
Setting options in the menu 77
Sensitivity menu item 78
Frequency Preset menu item 79
Name menu item 79
Auto Lock menu item 80
Advanced menu item 81
Advanced > Tune menu item 82
Only adjusting the frequency 82
Setting the channel and frequency 82
Advanced > Mute Mode menu item (SKM 100 G4-S only)
83
Advanced > Pilot Tone menu item 83
2
Advanced > LCD Contrast menu item 83
Advanced > Reset menu item 84
Advanced > Software Revision menu item 84
Using the SK 100 G4 85
Operating elements of the SK 100 G4 bodypack transmitter 86
Switching the SK 100 G4 bodypack transmitter on and off
87
Muting the bodypack transmitter (AF mute) 88
Deactivating the RF signal (RF mute) 89
Deactivating the RF signal with the MUTE switch 89
Deactivating the RF signal with the ON/OFF button 91
Lock-off function 92
Displays on the SK 100 G4 bodypack transmitter display
panel 93
Select a standard display 94
Buttons for navigating the SK 100 G4 menu 95
Navigating through the menu 95
Making changes in a menu item 95
Setting options in the menu 96
Sensitivity menu item 97
Frequency Preset menu item 97
Name menu item 98
Auto Lock menu item 98
Advanced menu item 99
Advanced > Tune menu item 100
Only adjusting the frequency 100
Setting the channel and frequency 100
Advanced > Mute Mode menu item 101
Advanced > Cable Emulation menu item 101
Advanced > Pilot Tone menu item 102
Advanced > LCD Contrast menu item 102
Advanced > Reset menu item 102
Advanced > Software Revision menu item 102
Using the SKP 100 G4 103
Operating elements of the SKP 100 G4 plug-on transmitter 104
Switching the SKP 100 G4 plug-on transmitter on and off
105
Muting the plug-on transmitter (AF mute) 106
Deactivating the RF signal (RF mute) 107
Deactivating the RF signal with the MUTE switch 107
Deactivating the RF signal with the ON/OFF button 108
Lock-off function 109
Displays on the SKP 100 G4 plug-on transmitter display
panel 110
Select a standard display 111
Buttons for navigating the SKP 100 G4 menu 112
Navigating through the menu 112
Making changes in a menu item 112
Setting options in the menu 113
3
Sensitivity menu item 114
Frequency Preset menu item 114
Name menu item 115
Auto Lock menu item 115
Advanced menu item 116
Advanced > Tune menu item 117
Only adjusting the frequency 117
Setting the channel and frequency 117
Advanced > Mute Mode menu item 118
Advanced > Pilot Tone menu item 118
Advanced > LCD Contrast menu item 118
Advanced > Reset menu item 119
Advanced > Software Revision menu item 119
Establishing a radio link 120
Setting notes 120
Synchronizing devices 121
Overview 122
Product variants 123
EK 100 G4 product variants 123
Made in Germany 123
Assembled in the USA 123
SKM 100 G4 product variants 124
Made in Germany 124
Assembled in the USA 124
SK 100 G4 product variants 125
Made in Germany 125
Assembled in the USA 125
SKP 100 G4 product variants 126
Made in Germany 126
Assembled in the USA 126
Frequency tables 127
Specifications 128
EK 100 G4 129
RF characteristics 129
AF characteristics 130
Overall device 130
SKM 100 G4 131
RF characteristics 131
AF characteristics 131
Overall device 132
SK 100 G4 133
RF characteristics 133
AF characteristics 133
Overall device 134
SKP 100 G4 135
RF characteristics 135
AF characteristics 136
Overall device 136
Pin assignment 137
3.5 mm stereo jack plug 137
4
3.5 mm mic jack plug 137
3.5 mm line jack plug 137
6.3 mm stereo jack plug, balanced (audio in/loop out)
137
6.3 mm mono jack plug, unbalanced 138
6.3 mm stereo jack plug for headphone jack 138
XLR-3 plug, balanced 138
Hollow jack plug for power supply 138
Cleaning and maintenance 139
Cleaning the sound inlet basket of the microphone module 139
5
Overview
PRODUCT INFORMATION
Overview
You can find information about the individual products in the ew 100 P G4
series under “ew 100 P G4 series products”.
For information about the available accessories, see “Accessories”.
You can find information about the ew 100 P G4 series frequency bank system under “The frequency bank system”.
6
ew 100 P G4 series products
ew 100 P G4 series products
You can also find more information here:
•A variety of frequency variants are available from the individual
products. You can find more information under “Product variants”.
•
You can find technical specifications about the individual products under “Specifications”.
•
You can find information about installing the products under “Installing
ew 100 P G4 series devices”.
•
You can find information about operating the products under “Using
ew 100 P G4 series devices”.
7
EK 100 G4 diversity receiver
►
You can find more detailed information about the EK 100 G4 in the
following sections:
•
Installation and Startup: “Installing the EK 100 G4”
•
Operation: “Using the EK 100 G4”
•
Technical Data: “EK 100 G4”
8
SKM 100 G4 handheld transmitter
►
SKM 100 G4 variant:
►
SKM 100 G4-S variant:
►
The SKM 100 G4 handheld transmitter is also available in the SKM 100 G4S variant with an integrated mute switch.
You can find more detailed information about the SKM 100 G4 in the
following sections:
•
Installation and Startup: “Installing the SKM 100 G4”
•
Operation: “Using the SKM 100 G4”
•
Technical Data: “SKM 100 G4”
9
SK 100 G4 bodypack transmitter
►
You can find more detailed information about the SK 100 G4 in the
following sections:
•
Installation and Startup: “Installing the SK 100 G4”
•
Operation: “Using the SK 100 G4”
•
Technical Data: “SK 100 G4”
10
SKP 100 G4 plug-on transmitter
►
You can find more detailed information about the SKP 100 G4 in the
following sections:
•
Installation and Startup: “Installing the SKP 100 G4”
•
Operation: “Using the SKP 100 G4”
•
Technical Data: “SKP 100 G4”
11
Accessories
Accessories
A variety of accessories are available for the ew 100 P G4 series.
12
Accessories
Microphones and cables
Microphone modules
We recommend using the following microphone modules with the
SKM 100 G4 and SKM 100 G4-S handheld transmitters.
►
Module
Features
Article
no.
MMD 835-1 BK
Dynamic, cardioid, black
502575
MMD 845-1 BK
Dynamic, super-cardioid, black
502576
MME 865-1 BK
Capacitor, super-cardioid, black
502581
MMD 935-1 BK
Dynamic, cardioid, black
502577
MMD 945-1 BK
Dynamic, super-cardioid, black
502579
MMK 965-1 BK
Capacitor, switchable
Cardioid/super-cardioid, black
502582
MMK 965-1 NI
Capacitor, switchable
Cardioid/super-cardioid, nickel
502584
MMD 42-1
Dynamic, omni-directional, black
506772
You can find more information about the individual microphone modules on their respective product pages at www.sennheiser.com.
Headset and Lavalier microphones
We recommend using the following Lavalier microphones and headset microphones with the SK 100 G4 bodypack transmitter.
►
Microphone
Features
Article
no.
ME 2-II
Lavalier microphone, omni-directional, black
507437
ME 3-II
Headset microphone, cardioid,
black
506295
ME 4-N
Lavalier microphone, cardioid,
black
005020
MKE 1-ew
Lavalier microphone, omni-directional, black
502876
MKE 1-ew-3
Lavalier microphone, omni-directional, beige
502879
MKE 2-ew Gold
Lavalier microphone, omni-directional, black
009831
MKE 2 ew-3 Gold
Lavalier microphone, omni-directional, beige
009832
MKE 40-ew
Lavalier microphone, cardioid,
black
500527
13
Accessories
Microphone
Features
Article
no.
SL Headmic 1 BE
Headband microphone, omni-directional,
beige
506272
SL Headmic 1 BK
Headband microphone, omni-directional,
black
506271
SL Headmic 1 SB
Headband microphone, omni-directional,
silver
506904
You can find more information about the individual microphones on
their respective product pages at www.sennheiser.com.
14
Accessories
Line connecting cable
The following cables can be used to connect cameras to the EK 100 G4 diversity receiver:
•
CL 1
3.5 mm jack plug on lockable 3.5 mm jack plugs
Article no. 005022
►
•
CL 100
XLR-3 on a 3.5 mm jack plug
Article no. 087046
►
15
Accessories
Rechargeable battery and charger
BA 2015 rechargeable battery
The BA 2015 rechargeable battery is designed for use with evolution wireless G4 series handheld transmitters, bodypack transmitters and
bodypack receivers.
Article no. 009950
►
L 2015 charger
The BA 2015 rechargeable battery can be charged in the L 2015 charger on
its own or inside of the bodypack transmitter/bodypack receiver.
Article no. 009828
►
16
Accessories
Accessories for camera mounting
CA 2 camera adapter
Camera adapter with hot shoe for portable bodypack transmitters/receivers from the ew G1, G2, G3 and G4 series.
Article no. 009986
►
17
Accessories
Additional accessories
Color labeling set
•
KEN 2, color labeling set for SKM handheld transmitters
Article no. 530195
►
Microphone clamp
•
MZQ 1, microphone clamp for SKM handheld transmitters
Article no. 076670
►
18
The frequency bank system
The frequency bank system
There are different frequency ranges in the UHF band available for transmission.
The following frequency ranges are available for the ew 100 G4 series:
•
A1 range: 470 – 516 MHz
•
A range: 516 – 558 MHz
•
AS range: 520 – 558 MHz
•
G range: 566 – 608 MHz
•
GB range: 606 – 648 MHz
•
B range: 626 – 668 MHz
•
C range: 734 – 776 MHz
•
D range: 780 – 822 MHz
•
TH range: 794 – 806 MHz
•
JB range: 806 – 810 MHz
•
E range: 823 – 865 MHz
•
K+ range: 925 – 937.5 MHz
Every frequency range has 21 frequency banks with up to 12 channels:
►
You can find information about the frequency presets in the frequency tables of the respective frequency ranges under “Frequency tables”.
19
Installing ew 100 P G4 series devices
INSTALLATION
Installing ew 100 P G4 series devices
You can find information about installing
ew 100 P G4 series devices in the following sections.
and
connecting
•
EK 100 G4 diversity receiver >> “Installing the EK 100 G4”
•
SKM 100 G4 handheld transmitter >> “Installing the SKM 100 G4”
•
SK 100 G4 bodypack transmitter >> “Installing the SK 100 G4”
•
SKP 100 G4 plug-on transmitter >> “Installing the SKP 100 G4”
You can find information about operating the products under “Using
ew 100 P G4 series devices”.
20
Installing the EK 100 G4
Installing the EK 100 G4
These sections contain detailed information about installing the
EK 100 G4.
You can find information about operating the EK 100 G4 under “Using the
EK 100 G4”.
Inserting and removing the batteries/rechargeable
batteries
You can operate the diversity receiver either with batteries (AA, 1.5 V) or
with the rechargeable Sennheiser BA 2015 battery.
▷
Press the two catches and open the battery compartment cover.
▷
Insert the batteries or the rechargeable battery as shown below. Please
observe correct polarity when inserting the batteries.
►
▷
Close the battery compartment.
The cover locks into place with an audible click.
21
Installing the EK 100 G4
Battery status
Charge status of the batteries:
►
Charge status is critical (LOW BATT):
►
22
Installing the EK 100 G4
Attaching the diversity receiver to a camera
You can attach the diversity receiver on the hot shoe of the camera with the
included CA 2 camera kit.
To attach the EK 100 G4 diversity receiver to a camera:
▷
Determine where on the perforated plate you need to attach the hot
shoe adapter so that the diversity receiver can be optimally attached to
the camera.
▷
Place a square nut under the perforated plate at this position.
▷
Affix the hot shoe adapter to the perforated plate with the square nut.
23
Installing the EK 100 G4
▷
Lift the belt clip.
▷
Press one side of the clip downward on the fixing hole and pull it out of
the housing.
▷
Do the same thing on the other side.
▷
Place the perforated plate on the rear side of the diversity receiver.
▷
Reattach the clip.
24
Installing the EK 100 G4
▷
Slide the receiver onto a camera.
25
Installing the EK 100 G4
Connecting the diversity receiver to a camera
To connect the diversity receiver to a camera:
▷
Attach the line input of the camera to the jack socket of the receiver using one of the enclosed line connecting cables.
26
Installing the EK 100 G4
▷
Adjust the level of the AF Out audio output in the operating menu of the
diversity receiver based on the input level of the camera (see “AF Out
menu item”).
The shielding of the line cable acts as an antenna for the second diversity branch. For details on the pin assignment, see “Pin assignment”.
27
Installing the SKM 100 G4
Installing the SKM 100 G4
These sections contain detailed information about installing and starting
up the SKM 100 G4.
You can find information about operating the SKM 100 G4 under “Using
the SKM 100 G4”.
28
Installing the SKM 100 G4
Inserting and removing the batteries/rechargeable
batteries
You can operate the wireless microphone either with batteries (AA, 1.5 V)
or with the rechargeable Sennheiser BA 2015 battery.
▷
Screw the rear part of the wireless microphone in the direction of the
arrow (counter-clockwise) off of the handle of the wireless microphone.
When you remove the wireless microphone during operation, mute is
automatically activated. MUTE appears in the display panel. When
you screw the microphone back together, mute is deactivated.
▷
Pull the rear part of the wireless microphone all the way out.
▷
Open the cover of the battery compartment.
▷
Place the batteries or the BA 2015 rechargeable battery in the battery
compartment as shown on the cover. Please observe correct polarity
when inserting the batteries/accupack.
▷
Close the cover.
▷
Push the battery compartment into the handle of the wireless microphone.
▷
Screw the rear part of the wireless microphone back onto the handle.
29
Installing the SKM 100 G4
Battery status
Charge status of the batteries:
►
Charge status is critical (LOW BATT):
►
30
Installing the SKM 100 G4
Replacing the microphone module
You can find a list of the recommended microphone modules for the handheld transmitter under “Microphones and cables”.
To change the microphone module:
▷
Unscrew the microphone module.
▷
Screw the desired microphone module on.
►
Do not touch the wireless microphone contacts or the microphone
module contacts. If you touch the contacts, they may become dirty or
bent.
When you unscrew the microphone module during operation, mute is automatically activated. MUTE appears in the display panel. When you screw
the microphone module back on, mute is deactivated.
31
Installing the SKM 100 G4
Changing the colored ring
To change the colored ring:
▷
Pull the colored ring off as shown in the diagram.
►
▷
Attached a colored ring in the color you want as shown in the diagram.
►
32
Installing the SK 100 G4
Installing the SK 100 G4
These sections contain detailed information about installing and starting
up the SK 100 G4.
You can find information about operating the SK 100 G4 under “Using the
SK 100 G4”.
33
Installing the SK 100 G4
Inserting and removing the batteries/rechargeable
batteries
You can operate the bodypack transmitter either with batteries (AA, 1.5 V)
or with the rechargeable Sennheiser BA 2015 battery.
▷
Press the two catches and open the battery compartment cover.
▷
Insert the batteries or the rechargeable battery as shown below. Please
observe correct polarity when inserting the batteries.
►
▷
Close the battery compartment.
The cover locks into place with an audible click.
34
Installing the SK 100 G4
Battery status
Charge status of the batteries:
►
Charge status is critical (LOW BATT):
►
35
Installing the SK 100 G4
Connecting a microphone to the SK 100 G4
You can find a list of recommended Lavalier and headset microphones for
the bodypack transmitter under “Microphones and cables”.
To connect a microphone to the bodypack transmitter:
▷
Insert the cable’s 3.5 mm jack plug into the MIC/LINE socket on the
bodypack transmitter as shown in the diagram.
▷
Screw the plug’s coupling ring onto the audio socket thread of the
bodypack transmitter.
36
Installing the SK 100 G4
Connecting an instrument or line source to the
SK 100 G4
You can connect instruments or audio sources with a line level to the
bodypack transmitter.
To do this, you will need the Ci 1-N (6.3 mm jack plug on a lockable 3.5 mm
jack plug) or CL 2 (XLR-3F plug on lockable 3.5 mm jack plug) Sennheiser
cables.
To connect an instrument or line source to bodypack transmitter:
▷
Insert the cable’s 3.5 mm jack plug into the MIC/LINE socket on the
bodypack transmitter as shown in the diagram.
▷
Screw the plug’s coupling ring onto the audio socket thread of the
bodypack transmitter.
►
37
Installing the SK 100 G4
Attaching the bodypack transmitter to clothing
You can use the belt clip to attach the bodypack transmitter to your waistband or on a guitar strap.
The belt clip is detachable so that you can also attach the bodypack transmitter with the antenna pointing downwards. To do so, withdraw the belt
clip from its fixing points and attach it the other way round.
The belt clip is secured so that it cannot slide out of its fixing points accidentally.
►
To detach the belt clip:
▷
Lift the belt clip as shown in the diagram.
▷
Press one side of the clip downward on the fixing hole and pull it out of
the transmitter housing.
▷
Do the same thing on the other side.
38
Installing the SKP 100 G4
Installing the SKP 100 G4
These sections contain detailed information about installing the
SKP 100 G4.
You can find information about operating the SKP 100 G4 under “Using the
SKP 100 G4”.
39
Installing the SKP 100 G4
Inserting and removing the batteries/rechargeable
batteries
You can operate the plug-on transmitter either with batteries (AA, 1.5 V) or
with the rechargeable Sennheiser BA 2015 battery.
▷
Slide the battery compartment cover in the direction of the embossed
arrow and open the cover.
▷
Insert the batteries or the accupack as shown below. Please observe
correct polarity when inserting the batteries/accupack.
▷
Close the battery compartment.
The cover locks into place with an audible click.
40
Installing the SKP 100 G4
Battery status
Charge status of the batteries:
►
Charge status is critical (LOW BATT):
►
41
Installing the SKP 100 G4
Attaching the plug-on transmitter to the microphone
Microphones with a metal casing should be used for optimal signal
transmission.
▷
Loosen the locking ring (2) by rotating it in the clockwise direction past
the center point.
This unlocks the XLR-3 plug (1) of the plug-on transmitter.
▷
Connect the plug-on transmitter's XLR-3 plug (1) to the XLR-3 socket of
the microphone.
▷
Tighten the locking ring (2) by rotating it counter-clockwise in the direction of the arrow.
42
Using ew 100 P G4 series devices
OPERATION
Using ew 100 P G4 series devices
You can find information about using ew 100 P G4 series devices in the following sections.
•
EK 100 G4 diversity receiver >> “Using the EK 100 G4”
•
SKM 100 G4 handheld transmitter >> “Using the SKM 100 G4”
•
SK 100 G4 bodypack transmitter >> “Using the SK 100 G4”
•
SKP 100 G4 plug-on transmitter >> “Using the SKP 100 G4”
You can find information about installing the products under “Installing ew 100 P G4 series devices”.
43
Using ew 100 P G4 series devices
In the sections below, you can find important information about specific
use cases.
•
Establishing a radio link between the transmitter and receiver >> “Establishing a radio link”
•
Synchronizing the receiver settings to the transmitter >> “Synchronizing devices”
•
Using the menu of the diversity receiver >> “Displays on the EK 100 G4
display panel”
•
Using the menu of the handheld transmitter >> “Displays on the
SKM 100 G4 handheld transmitter display panel”
•
Using the menu of the bodypack transmitter >> “Displays on the
SK 100 G4 bodypack transmitter display panel”
•
Using the menu of the plug-on transmitter >> “Displays on the
SKP 100 G4 plug-on transmitter display panel”
44
Using the EK 100 G4
Using the EK 100 G4
These sections contain detailed information about using the EK 100 G4.
You can find information about installing the EK 100 under “Installing the
EK 100 G4”.
45
Using the EK 100 G4
Operating elements of the EK 100 G4 diversity receiver
►
1 Display panel
• See “Displays on the EK 100 G4 display panel”
2 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the EK 100 G4 on and off”
• flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
3 Wireless reception indicator, green LED
• illuminated = RF
4 UP button
• See “Buttons for navigating through the menu”
5 SET button
• See “Buttons for navigating through the menu”
6 DOWN button
• See “Buttons for navigating through the menu”
46
Using the EK 100 G4
7 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the EK 100 G4 on and off”
• Escape function in the menu
See “Buttons for navigating through the menu”
8 Infra-red interface
• See “Synchronizing devices”
9 3.5 mm jack socket
• lockable
See “Connecting the diversity receiver to a camera”
Switching the EK 100 G4 on and off
▷
Press the two catches and open the battery compartment cover.
To switch the receiver on:
▷
Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
To switch the receiver off:
▷
Hold down the ON/OFF button until the display goes off.
47
Using the EK 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Auto Lock menu item”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷
Press the SET button.
▷
Press the UP or DOWN button.
Locked appears in the display panel.
Unlock? appears in the display panel.
▷
Press the SET button.
Lock-off function is now temporarily deactivated.
When you are in the operating menu
>> Lock-off function is deactivated long enough for you to work in the operating menu.
When one of the standard displays is shown
>> Lock-off function is automatically activated after 10 seconds.
The Lock-off function icon flashes while the lock-off function is being activated again.
48
Using the EK 100 G4
Displays on the EK 100 G4 display panel
Status information such as reception quality, battery status, audio level,
etc. is displayed on the home screen of the display panel. See “Home
screen”.
The display panel also displays the operating menu which you can use to
configure all of the settings. See “Setting options in the menu”.
49
Using the EK 100 G4
Buttons for navigating through the menu
To navigate through the EK 100 G3 operating menu, you need the following
buttons.
►
Press the ON/OFF button
•
ESC function: Cancels the entry and returns to the current standard display
•
Selects a standard display (see “Home screen”)
►
Press the SET button
•
Changes from the current standard display to the operating menu
•
Calls up a menu item
•
Changes to a submenu
•
Stores the settings and returns to the operating menu
50
Using the EK 100 G4
►
Press the UP or DOWN button
•
Changes to the previous or next menu item
•
Changes the setting of a menu item
51
Using the EK 100 G4
Home screen
After you switch on the receiver, the display panel initially displays the
Sennheiser logo. After a short time, the home screen is then displayed.
The home screen has two different standard displays.
▷
Short-press the ON/OFF button to switch between the standard displays.
Frequency/Name standard display
►
1 RF RF level (radio frequency)
• RF signal level display
• including the display of the squelch threshold (see “Squelch menu
item”)
2 AF audio level (audio frequency)
• Displays the audio level of the received transmitter
When the display shows full deflection, the audio input level is excessively high.
• See “AF Out menu item”
3 Frequency
• Current receiving frequency
• See “Frequency Preset menu item”
4 Name
• Freely selectable name of the receiver
• See “Name menu item”
5 Lock-off function
• Lock-off function is activated on the receiver
• See “Lock-off function”
52
Using the EK 100 G4
6 Battery status of the receiver
• See “Inserting and removing the batteries/rechargeable batteries”
7 MUTE muting function
• No RF signal received
8 P pilot tone
• P = Activated pilot tone evaluation
• No symbol = Evaluation is deactivated
• P is black = Pilot tone is being received on the current frequency
• See “Advanced -> Pilot Tone menu item”
Frequency Bank/Channel/Name standard display
The Frequency Bank/Channel/Name standard display shows the level of
the line output AF Out instead of the MUTE muting function.
►
B.Ch: 1. 1
ew100 G4
RF AF P +6dB
53
Using the EK 100 G4
Setting options in the menu
In the EK 100 G4 menu, you can configure the following settings.
Synchronizing the transmitter with the diversity receiver
▷
See “Sync menu item”
Adjusting the squelch threshold
▷
See “Squelch menu item”
Scanning for unused frequency presets, releases and selects frequency presets
▷
See “Easy Setup menu item”
Setting the frequency bank and the channel
▷
See “Frequency Preset menu item”
Entering a freely selectable name
▷
See “Name menu item”
Adjusting the audio output level
▷
See “AF Out menu item”
Activate/deactivate the automatic lock-off function
▷
See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
•
Adjusting the receiving frequencies for the U frequency bank
•
Activating/deactivating the pilot tone evaluation
•
Adjusting the contrast of the display panel
•
Resetting the receiver
•
Displaying the current software revision
▷
See “Advanced menu item”
54
Using the EK 100 G4
Menu structure
The figure shows the complete EK 100 G4 menu structure in an overview.
55
Using the EK 100 G4
Sync menu item
In the Sync menu item you can synchronize ew 100 P G4 series transmitters and receivers.
For more information, see “Establishing a radio link”.
56
Using the EK 100 G4
Squelch menu item
You can adjust the squelch threshold in the Squelch menu item.
Setting range:
•
Low >> 5 dBμV
•
Middle >> 15 dBμV
•
High >> 25 dBμV
The squelch threshold is displayed on the home screen in the RF signal level area.
►
To open the Squelch menu item:
▷
On the home screen, press the SET button to open the operating menu.
▷
Press the UP or DOWN button until the Squelch menu item appears in
the selection frame.
▷
Press the SET button to open the menu item.
▷
Adjust the settings as desired.
►
▷
Press the SET button to save the changes you made to the settings.
or
▷
Press the ON/OFF button to cancel the entry without saving the settings.
57
Using the EK 100 G4
CAUTION
Risk of hearing and material damage
If you set the squelch threshold to a very low value, a very loud hissing
noise can occur in the receiver. This hissing noise can be loud enough to
cause hearing damage or overload your system’s loudspeakers.
▷
Before adjusting the squelch threshold, set the volume of the audio output to the minimum.
▷
Never change the squelch threshold during a live transmission.
58
Using the EK 100 G4
Easy Setup menu item
You can scan for unused frequencies using the Easy Setup menu item.
Switch off all transmitters before you perform the scan. If transmitters are still switched on, they are detected as unavailable frequencies and the frequencies that are actually available cannot then be
used.
To open the Easy Setup menu item:
▷
On the home screen, press the SET button to open the operating menu.
▷
Press the UP or DOWN button until the Easy Setup menu item appears
in the selection frame.
▷
Press the SET button to open the menu item.
▷
Adjust the settings as desired.
• Scan New List: Automatically searches for unused receiving frequencies (frequency preset scan):
►
• Current List: Selects an unused frequency preset:
►
• Reset List: Releases all occupied frequency presets and selects an
unused frequency preset:
►
59
Using the EK 100 G4
▷
Press the SET button to save the changes you made to the settings.
or
▷
Press the ON/OFF button to cancel the entry without saving the settings.
60
Using the EK 100 G4
Frequency Preset menu item
In the Frequency Preset menu item, you can adjust the receiving frequency of the receiver by adjusting the frequency bank and the channel.
To open the Frequency Preset menu item:
▷
On the home screen, press the SET button to open the operating menu.
▷
Press the UP or DOWN button until the Frequency Preset menu item
appears in the selection frame.
▷
Press the SET button to open the menu item.
▷
Adjust the settings as desired.
►
▷
Press the SET button to save the changes you made to the settings.
or
▷
Press the ON/OFF button to cancel the entry without saving the settings.
61
Using the EK 100 G4
Name menu item
In the Name menu item you can enter a name for the radio link.
To open the Name menu item:
▷
On the home screen, press the SET button to open the operating menu.
▷
Press the UP or DOWN button until the Name menu item appears in the
selection frame.
▷
Press the SET button to open the menu item.
▷
Adjust the settings as desired.
►
▷
Press the SET button to save the changes you made to the settings.
or
▷
Press the ON/OFF button to cancel the entry without saving the settings.
62
Using the EK 100 G4
AF Out menu item
In the AF Out menu item you can adjust the level of the line audio output
based on the level of the connected camera.
Setting range:
•
-30 dB to +12 dB in 6 dB steps
To open the AF Out menu item:
▷
On the home screen, press the SET button to open the operating menu.
▷
Press the UP or DOWN button until the AF Out menu item appears in
the selection frame.
▷
Press the SET button to open the menu item.
▷
Adjust the settings as desired.
►
▷
Press the SET button to save the changes you made to the settings.
or
▷
Press the ON/OFF button to cancel the entry without saving the settings.
63
Using the EK 100 G4
Auto Lock menu item
In the Auto Lock menu item you can activate or deactivate the auto lockoff function.
You can find information about temporarily deactivating the lock-off
function during operation under “Lock-off function”.
To open the Auto Lock menu item:
▷
On the home screen, press the SET button to open the operating menu.
▷
Press the UP or DOWN button until the Auto Lock menu item appears
in the selection frame.
▷
Press the SET button to open the menu item.
▷
Adjust the settings as desired.
►
▷
Press the SET button to save the changes you made to the settings.
or
▷
Press the ON/OFF button to cancel the entry without saving the settings.
64
Using the EK 100 G4
Advanced menu item
In the Advanced submenu you can configure enhanced settings.
To open the Advanced submenu:
▷
On the home screen, press the SET button to open the operating menu.
▷
Press the UP or DOWN button until the Advanced menu item appears
in the selection frame.
▷
Press the SET button to open the menu item.
The following sub-items are available:
Adjusting the receiving frequency for the frequency bank U
▷
See “Advanced -> Tune menu item”
Activating/deactivating the pilot tone evaluation
▷
See “Advanced -> Pilot Tone menu item”
Adjusting the contrast of the display panel
▷
See “Advanced -> LCD Contrast menu item”
Resetting the receiver
▷
See “Advanced -> Reset menu item”
Displaying the current software revision
▷
See “Advanced -> Software Revision menu item”
65
Using the EK 100 G4
Advanced -> Tune menu item
In the Tune menu item of the Advanced submenu, you can configure the
receiving frequencies for the U frequency bank.
Only adjusting the frequency
▷
Open the Tune menu item in the Advanced menu.
▷
Adjust the settings.
►
Setting the channel and frequency
▷
Select the menu item and call it up by holding down the SET button until the channel selection appears.
►
Advanced -> Pilot Tone menu item
In the Pilot Tone menu item of the Advanced submenu, you can activate
and deactivate the pilot tone evaluation.
►
The pilot tone has an inaudible frequency that is sent from the transmitter
and evaluated by the receiver. It supports the receiver’s squelch function.
66
Using the EK 100 G4
Advanced -> LCD Contrast menu item
In the LCD Contrast menu item of the Advanced submenu, you can adjust
the display contrast of the display panel in 16 steps.
►
Advanced -> Reset menu item
In the Reset menu item of the Advanced submenu, you can reset the settings of the receiver.
When you reset the diversity receiver, only the selected settings of the pilot
tone and the U frequency bank are retained.
►
Advanced -> Software Revision menu item
In the Software Revision menu item of the Advanced submenu, you can
display the current software version of the receiver.
67
Using the SKM 100 G4
Using the SKM 100 G4
These sections contain detailed information about using the SKM 100 G4
and SKM 100 G4-S.
You can find information on installation and startup of the SKM 100 G4 and
SKM 100 G4-S under “Installing the SKM 100 G4”.
68
Using the SKM 100 G4
Operating elements of the SKM 100 G4 handheld
transmitter
►
1 Display panel
• See “Displays on the SKM 100 G4 handheld transmitter display panel”
2 Infra-red interface
• See “Synchronizing devices”
3 DOWN, UP and SET multi-function switch
• See “Buttons for navigating the SKM 100 G4 menu”
4 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the SKM 100 G4 handheld transmitter on and off”
• Escape function in the menu
See “Buttons for navigating the SKM 100 G4 menu”
5 Colored ring
• Available in different colors (see “Additional accessories” and
“Changing the colored ring”)
• Can be turned to protect the multi-function switch
69
Using the SKM 100 G4
6 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the SKM 100 G4 handheld transmitter on and off”
• flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
7 MIC button (only SKM 100 G4-S)
• See “Muting the handheld transmitter (AF mute)”
• See “Advanced > Mute Mode menu item (SKM 100 G4-S only)”
Switching the SKM 100 G4 handheld transmitter on
and off
To switch on the SKM 100 G4:
▷
Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
►
To switch off the SKM 100 G4:
▷
Hold down the ON/OFF button until the display goes off.
70
Using the SKM 100 G4
Muting the handheld transmitter (AF mute)
SKM 100 G4
The audio signal of the transmitter cannot be muted.
However, when you deactivate the RF signal no AF signal is output. See
“Deactivating the RF signal (RF mute)”.
SKM 100 G4-S
You can mute the audio signal by pressing the MIC button.
•
The MIC button lights up red: the audio signal is activated
•
The MIC button is not lit: the audio signal is muted
71
Using the SKM 100 G4
Deactivating the RF signal (RF mute)
You can temporarily deactivate the RF signal when the microphone is
switched on. When the RF signal is deactivated, no audio signal is output.
Use this function to save battery or when you want to prepare a microphone for use during live broadcast without interfering with the current
transmission path.
To deactivate the RF signal:
▷
Short-press the ON/OFF button.
RF Mute On? appears.
▷
Press the SET button.
The transmission frequency is displayed, however the wireless microphone is not transmitting an RF signal. The transmission icon is not lit
(see “Displays on the SKM 100 G4 handheld transmitter display panel”).
To activate the RF signal:
▷
Short-press the ON/OFF button.
RF Mute Off? appears.
▷
Press the SET button.
The transmission icon appears again (see “Displays on the SKM 100 G4
handheld transmitter display panel”).
►
72
Using the SKM 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Buttons for navigating the SKM 100 G4 menu”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷
Press the SET button.
▷
Press the UP or DOWN button.
Locked appears in the display panel.
Unlock? appears in the display panel.
▷
Press the SET button.
Lock-off function is now temporarily deactivated.
►
73
Using the SKM 100 G4
Displays on the SKM 100 G4 handheld transmitter
display panel
You can view the following information on the transmitter display.
►
1 AF audio level
• Displays the audio level with peak hold function
• See “Sensitivity menu item”
2 Frequency
• Configured transmission frequency
• See “Frequency Preset menu item”
3 Name
• Freely selectable name of the receiver
• See “Name menu item”
4 Transmission icon
• RF signal is being transmitted
• See “Deactivating the RF signal (RF mute)”
5 Lock-off function
• Lock-off function is activated
• See “Auto Lock menu item”
6 Battery status
• See “Battery status”
7 MUTE muting function
• The audio signal is muted
• See “Muting the handheld transmitter (AF mute)”
• See “Deactivating the RF signal (RF mute)”
8 P pilot tone
• Pilot tone transmission is activated
• See “Advanced > Pilot Tone menu item”
74
Using the SKM 100 G4
>> “Buttons for navigating the SKM 100 G4 menu”
>> “Setting options in the menu”
Select a standard display
▷
Move the multi-function switch to select a standard display:
Frequency/Name standard display
►
548.100 MHz
ew100 G4
AF
P MUTE
Channel/Frequency standard display
►
B.Ch: 20.12
548.100 MHz
AF
P MUTE
Name/Channel standard display
►
ew100 G4
B.Ch: 20.12
AF
P MUTE
75
Using the SKM 100 G4
Buttons for navigating the SKM 100 G4 menu
Navigating through the menu
To open the menu:
▷
Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷
Press the UP or DOWN buttons to navigate through the individual
menu items.
▷
Press the SET button to open the selected menu item.
“Operating elements of the SKM 100 G4 handheld transmitter”
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷
Press the UP or DOWN buttons to set the displayed value.
▷
Press the SET button to save the setting.
▷
Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
“Operating elements of the SKM 100 G4 handheld transmitter”
>> “Displays on the SKM 100 G4 handheld transmitter display panel”
>> “Setting options in the menu”
76
Using the SKM 100 G4
Setting options in the menu
In the SKM 100 G4 menu, you can configure the following settings.
Adjusting the input sensitivity
▷
See “Sensitivity menu item”
Setting the frequency bank and the channel
▷
See “Frequency Preset menu item”
Entering a freely selectable name
▷
See “Name menu item”
Activating/deactivating the automatic lock-off function
▷
See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
•
Adjusting the transmission frequencies for the U frequency bank
•
Defining the MIC button setting (SKM 100 G4-S only)
•
Activating/deactivating the pilot tone evaluation
•
Adjusting the contrast of the display panel
•
Resetting the transmitter
•
Displaying the current software revision
▷
See “Advanced menu item”
77
Using the SKM 100 G4
Sensitivity menu item
•
Adjusting the input sensitivity – AF audio level
►
Setting range: 0 dB to -48 dB in 6 dB steps.
The AF audio level is also displayed when the wireless microphone is muted, e.g. to check the sensitivity before a live broadcast.
Recommended presets:
•
Loud music/vocals: -48 to -18 dB
•
Moderation: -18 to -12 dB
•
Interviews: -12 to 0 dB
78
Using the SKM 100 G4
Frequency Preset menu item
•
Manually selecting a frequency bank and channel
►
While you work in the Frequency Preset menu, the RF signal is deactivated.
Please note when creating multi-channel systems:
Only the factory-preset frequencies within one frequency bank are intermodulation-free. The wireless microphone and receiver must be set to the
same frequency. Be sure to note the information on frequency selection
under “Establishing a radio link”.
Name menu item
•
Entering names
►
In the Name menu item you can enter any name you want for the wireless
microphone (e.g. the names of the musicians).
The name can be shown in the Frequency/Name and Name/Channel standard displays.
The names are a maximum of 8 characters:
•
All letters except umlauts.
•
Numbers from 0 to 9
•
Special characters and spaces
Enter the names as follows:
▷
Move the multi-function switch to select a character.
▷
Press the multi-function switch to jump to the next space or to save the
name you have entered once it is complete.
79
Using the SKM 100 G4
Auto Lock menu item
•
Switching the automatic lock-off function on and off
►
This lock prevents the wireless microphone from being unintentionally
switched off and also prevents any unintentional changes to the transmitter’s configuration. In the current standard display, the lock icon shows
whether the lock-off function is currently switched on.
You can find information about using the lock-off function under “Lock-off
function”.
80
Using the SKM 100 G4
Advanced menu item
In the Advanced submenu you can configure enhanced settings.
The following sub-items are available:
Adjusting the transmission frequencies for the U frequency bank
▷
See “Advanced > Tune menu item”
Defining the MIC button setting (SKM 100 G4-S only)
▷
See “Advanced > Mute Mode menu item (SKM 100 G4-S only)”
Activating/deactivating the pilot tone evaluation
▷
See “Advanced > Pilot Tone menu item”
Adjusting the contrast of the display panel
▷
See “Advanced > LCD Contrast menu item”
Resetting the transmitter
▷
See “Advanced > Reset menu item”
Displaying the current software revision
▷
See “Advanced > Software Revision menu item”
81
Using the SKM 100 G4
Advanced > Tune menu item
•
Configuring the transmission frequency and frequency bank U
When you have configured the wireless microphone to a system bank and
you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears in the display. In the factory
settings, the channels of the frequency bank U are not assigned to any
transmission frequency.
While you work in the Tune menu, the RF signal is deactivated.
You can configure a transmission frequency for the current channel or select a channel in the frequency bank U and configure a transmission frequency for this channel in the Tune menu. Be sure to note the information
on frequency selection, see “Setting notes”.
Only adjusting the frequency
To configure the transmission frequency for the current channel:
▷
Open the Tune menu item in the Advanced menu.
The frequency selection appears.
►
▷
Configure the desired frequency.
▷
Press the multi-function switch.
Your settings will be saved. You are now back in the operating menu.
Setting the channel and frequency
To select a channel and assign it a frequency:
▷
Move the multi-function switch until the Tune menu item appears.
▷
Hold down the multi-function switch until the frequency bank selection
appears.
►
▷
Set the desired channel.
▷
Press the multi-function switch.
The frequency selection appears.
▷
Configure the frequency.
82
Using the SKM 100 G4
Advanced > Mute Mode menu item (SKM 100 G4-S
only)
•
Configuring the function of the MIC button
►
AF On/Off mode
•
When you press the MIC button, no audio signal is transmitted.
Disabled mode
•
No function
You can find information about the MIC button under “Muting the handheld
transmitter (AF mute)”.
Advanced > Pilot Tone menu item
•
Activating/deactivating pilot tone transmission
►
The pilot tone has an inaudible frequency that is sent from the transmitter
and evaluated by the receiver. It supports the receiver’s squelch function.
Advanced > LCD Contrast menu item
•
Adjusting the contrast of the display panel
You can configure the contrast of the display in 16 steps.
83
Using the SKM 100 G4
Advanced > Reset menu item
•
Resetting the wireless microphone
►
When you reset the wireless microphone, only the selected settings of the
pilot tone and the U frequency bank are retained.
Advanced > Software Revision menu item
•
Show software revision
You can display the current software revision.
84
Using the SK 100 G4
Using the SK 100 G4
These sections contain detailed information about using the SK 100 G4.
You can find information on installation and startup of the SK 100 G4 under
“Installing the SK 100 G4”.
85
Using the SK 100 G4
Operating elements of the SK 100 G4 bodypack
transmitter
►
1 Display panel
• See “Displays on the SK 100 G4 bodypack transmitter display panel”
2 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the SK 100 G4 bodypack transmitter on and off”
• flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
3 Audio overload indicator, yellow LED
• illuminated = AF PEAK (overload)
See “Sensitivity menu item”
4 UP button
• See “Buttons for navigating the SK 100 G4 menu”
5 SET button
• See “Buttons for navigating the SK 100 G4 menu”
6 DOWN button
• See “Buttons for navigating the SK 100 G4 menu”
86
Using the SK 100 G4
7 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the SK 100 G4 bodypack transmitter on and off”
• Escape function in the menu
See “Buttons for navigating the SK 100 G4 menu”
8 Infra-red interface
• See “Synchronizing devices”
9 MUTE switch
• Deactivate and activate audio signal
See “Muting the bodypack transmitter (AF mute)”
• Deactivate and activate RF signal
See “Deactivating the RF signal (RF mute)”
Switching the SK 100 G4 bodypack transmitter on
and off
▷
Press the two catches and open the battery compartment cover.
To switch on the SK 100 G4:
▷
Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
To switch off the SK 100 G4:
▷
Hold down the ON/OFF button until the display goes off.
87
Using the SK 100 G4
Muting the bodypack transmitter (AF mute)
You can deactivate the audio signal with the MUTE switch.
To do this, the MUTE switch function must be configured to AF On/Off.
You can find more information about this subject under “Advanced > Mute
Mode menu item”.
►
▷
Slide the MUTE switch to the MUTE position.
The audio signal is muted. The message MUTE is shown on the display.
88
Using the SK 100 G4
Deactivating the RF signal (RF mute)
You can deactivate the RF signal in two ways:
Deactivating the RF signal with the MUTE switch
You can deactivate the RF signal with the MUTE switch.
To do this, the MUTE switch function must be configured to RF On/Off.
You can find more information about this subject under “Advanced > Mute
Mode menu item”.
►
89
Using the SK 100 G4
▷
Slide the MUTE switch to the MUTE position.
The RF signal is deactivated. The message MUTE is shown in the display and the transmission icon no longer appears.
90
Using the SK 100 G4
Deactivating the RF signal with the ON/OFF button
You can deactivate the RF signal with the ON/OFF button.
To deactivate the RF signal:
▷
Short-press the ON/OFF button.
RF Mute On? appears.
▷
Press the SET button.
The RF signal is deactivated. The message MUTE is shown in the display and the transmission icon no longer appears.
To activate the RF signal:
▷
Short-press the ON/OFF button.
RF Mute Off? appears.
▷
Press the SET button.
The transmission icon appears again.
91
Using the SK 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Buttons for navigating the SK 100 G4 menu”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷
Press the SET button.
▷
Press the UP or DOWN button.
Locked appears in the display panel.
Unlock? appears in the display panel.
▷
Press the SET button.
Lock-off function is now temporarily deactivated.
►
92
Using the SK 100 G4
Displays on the SK 100 G4 bodypack transmitter
display panel
You can view the following information on the transmitter display.
►
1 AF audio level
• Displays the audio level with peak hold function
• See “Sensitivity menu item”
2 Frequency
• Configured transmission frequency
• See “Frequency Preset menu item”
3 Name
• Freely selectable name of the receiver
• See “Name menu item”
4 Transmission icon
• RF signal is being transmitted
• See “Deactivating the RF signal (RF mute)”
5 Lock-off function
• Lock-off function is activated
• See “Auto Lock menu item”
6 Battery status
• See “Battery status”
7 MUTE muting function
• The audio signal is muted
• See “Muting the bodypack transmitter (AF mute)”
• See “Deactivating the RF signal (RF mute)”
8 P pilot tone
• Pilot tone transmission is activated
• See “Advanced > Pilot Tone menu item”
93
Using the SK 100 G4
>> “Buttons for navigating the SK 100 G4 menu”
>> “Setting options in the menu”
Select a standard display
▷
Press the UP or DOWN buttons to select a standard display.
Frequency/Name standard display
►
548.100 MHz
ew100 G4
AF
P MUTE
Channel/Frequency standard display
►
B.Ch: 20.12
548.100 MHz
AF
P MUTE
Name/Channel standard display
►
ew100 G4
B.Ch: 20.12
AF
P MUTE
94
Using the SK 100 G4
Buttons for navigating the SK 100 G4 menu
Navigating through the menu
To open the menu:
▷
Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷
Press the UP or DOWN buttons to navigate through the individual
menu items.
▷
Press the SET button to open the selected menu item.
“Operating elements of the SK 100 G4 bodypack transmitter”
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷
Press the UP or DOWN buttons to set the displayed value.
▷
Press the SET button to save the setting.
▷
Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
“Operating elements of the SK 100 G4 bodypack transmitter”
>> “Displays on the SK 100 G4 bodypack transmitter display panel”
>> “Setting options in the menu”
95
Using the SK 100 G4
Setting options in the menu
In the SK 100 G4 menu, you can configure the following settings.
Adjusting the input sensitivity
▷
See “Sensitivity menu item”
Setting the frequency bank and the channel
▷
See “Frequency Preset menu item”
Entering a freely selectable name
▷
See “Name menu item”
Activating/deactivating the automatic lock-off function
▷
See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
•
Adjusting the transmission frequencies for the U frequency bank
•
Configuring the MUTE switch
•
Configuring the guitar cable emulation
•
Activating/deactivating the pilot tone evaluation
•
Adjusting the contrast of the display panel
•
Resetting the transmitter
•
Displaying the current software revision
▷
See “Advanced menu item”
96
Using the SK 100 G4
Sensitivity menu item
•
Adjusting the input sensitivity – AF audio level
►
Setting range: 0 dB to –60 dB in 6 dB steps.
The AF audio level is also displayed when the bodypack transmitter is muted, e.g. to check the sensitivity before a live broadcast.
Recommended presets:
•
Loud music/vocals: –30 to –21 dB
•
Moderation: -21 to 0 dB
•
Electric guitar with single-coil pickups: –30 to -24 dB
•
Electric guitar with Humbucker pickups: -45 to -30 dB
•
Electric guitars with active electronics: -45 to -30 dB
Frequency Preset menu item
•
Manually selecting a frequency bank and channel
►
While you work in the Frequency Preset menu, the RF signal is deactivated.
Please note when creating multi-channel systems:
Only the factory-preset frequencies within one frequency bank are intermodulation-free. The bodypack transmitter and receiver must be set to the
same frequency. Be sure to note the information on frequency selection
under “Establishing a radio link”.
97
Using the SK 100 G4
Name menu item
•
Entering names
►
In the Name menu item you can enter any name you want for the bodypack
transmitters (e.g. the names of the musicians).
The name can be shown in the Frequency/Name and Name/Channel standard displays.
The names are a maximum of 8 characters:
•
All letters except umlauts.
•
Numbers from 0 to 9
•
Special characters and spaces
Enter the names as follows:
▷
Press the UP or DOWN buttons to select a character.
▷
Press the SET button to switch to the next space or to save the name
you have entered once it is complete.
Auto Lock menu item
•
Switching the automatic lock-off function on and off
►
This lock prevents the wireless microphone from being unintentionally
switched off and also prevents any unintentional changes to the transmitter’s configuration. In the current standard display, the lock icon shows
whether the lock-off function is currently switched on.
You can find information about using the lock-off function under “Lock-off
function”.
98
Using the SK 100 G4
Advanced menu item
In the Advanced submenu you can configure enhanced settings.
The following sub-items are available:
Adjusting the transmission frequencies for the U frequency bank
▷
See “Advanced > Tune menu item”
Configuring the MUTE switch
▷
See “Advanced > Mute Mode menu item”
Configuring the guitar cable emulation
▷
See “Advanced > Cable Emulation menu item”
Activating/deactivating the pilot tone evaluation
▷
See “Advanced > Pilot Tone menu item”
Adjusting the contrast of the display panel
▷
See “Advanced > LCD Contrast menu item”
Resetting the transmitter
▷
See “Advanced > Reset menu item”
Displaying the current software revision
▷
See “Advanced > Software Revision menu item”
99
Using the SK 100 G4
Advanced > Tune menu item
•
Configuring the transmission frequency and frequency bank U
When you have configured the bodypack transmitter to a system bank and
you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears in the display. In the factory
settings, the channels of the frequency bank U are not assigned to any
transmission frequency.
While you work in the Tune menu, the RF signal is deactivated.
You can configure a transmission frequency for the current channel or select a channel in the frequency bank U and configure a transmission frequency for this channel in the Tune menu. Be sure to note the information
on frequency selection, see “Setting notes”.
Only adjusting the frequency
To configure the transmission frequency for the current channel:
▷
Open the Tune menu item in the Advanced menu.
The frequency selection appears.
►
▷
▷
Configure the desired frequency.
Press the SET button.
Your settings will be saved. You are now back in the operating menu.
Setting the channel and frequency
To select a channel and assign it a frequency:
▷
Open the Tune menu item in the Advanced menu by pressing and holding the SET button until the frequency bank selection appears.
►
▷
Set the desired channel.
▷
Press the SET button.
The frequency selection appears.
▷
Configure the frequency.
100
Using the SK 100 G4
Advanced > Mute Mode menu item
•
Configuring the MUTE switch
►
AF On/Off mode
•
If set to position MUTE, the audio signal is muted.
RF On/Off mode
•
If set to position MUTE, the RF signal is deactivated.
Disabled mode
•
No function
You can find information about operating the mute switch under “Muting
the bodypack transmitter (AF mute)” and “Deactivating the RF signal (RF
mute)”.
Advanced > Cable Emulation menu item
•
Emulating a guitar cable
►
Using this menu item you can emulate the capacitances of your guitar cables and influence the sound of your guitar.
101
Using the SK 100 G4
Advanced > Pilot Tone menu item
•
Activating/deactivating pilot tone transmission
►
The pilot tone has an inaudible frequency that is sent from the transmitter
and evaluated by the receiver. It supports the receiver’s squelch function.
Advanced > LCD Contrast menu item
•
Adjusting the contrast of the display panel
You can configure the contrast of the display in 16 steps.
Advanced > Reset menu item
•
Resetting the bodypack transmitter
►
When you reset the bodypack transmitter, only the selected settings of the
pilot tone and the U frequency bank are retained.
Advanced > Software Revision menu item
•
Show software revision
You can display the current software revision.
102
Using the SKP 100 G4
Using the SKP 100 G4
These sections contain detailed information about using the SKP 100 G4.
You can find information on installation and startup of the SKP 100 G4 under “Installing the SKP 100 G4”.
103
Using the SKP 100 G4
Operating elements of the SKP 100 G4 plug-on
transmitter
►
1 Display panel
• See “Displays on the SKP 100 G4 plug-on transmitter display panel”
2 UP button
• See “Buttons for navigating the SKP 100 G4 menu”
3 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the SKP 100 G4 plug-on transmitter on and off”
• flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
4 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the SKP 100 G4 plug-on transmitter on and off”
• Escape function in the menu
See “Buttons for navigating the SKP 100 G4 menu”
5 DOWN button
• See “Buttons for navigating the SKP 100 G4 menu”
6 MUTE switch
• See “Muting the plug-on transmitter (AF mute)”
7 SET button
• See “Buttons for navigating the SKP 100 G4 menu”
8 Infra-red interface
• See “Synchronizing devices”
104
Using the SKP 100 G4
Switching the SKP 100 G4 plug-on transmitter on
and off
To switch on the SKP 100 G4:
▷
Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
To switch off the SKP 100 G4:
▷
Hold down the ON/OFF button until the display goes off.
105
Using the SKP 100 G4
Muting the plug-on transmitter (AF mute)
You can mute the audio signal with the MUTE switch.
To do this, the MUTE switch function must be configured to AF On/Off.
You can find more information about this subject under “Advanced > Mute
Mode menu item”.
▷
Slide the MUTE switch to the MUTE position.
The audio signal is muted. The message MUTE is shown on the display.
106
Using the SKP 100 G4
Deactivating the RF signal (RF mute)
You can deactivate the RF signal in two ways:
Deactivating the RF signal with the MUTE switch
You can deactivate the RF signal with the MUTE switch.
To do this, the MUTE switch function must be configured to RF On/Off. You
can find more information about this subject under “Advanced > Mute
Mode menu item”.
Slide the MUTE switch to the MUTE position.
107
Using the SKP 100 G4
The RF signal is deactivated. The message MUTE is shown in the display
and the transmission icon no longer appears.
Deactivating the RF signal with the ON/OFF button
You can deactivate the RF signal with the ON/OFF button.
To deactivate the RF signal:
▷
Short-press the ON/OFF button.
RF Mute On? appears.
▷
Press the SET button.
The RF signal is deactivated. The message MUTE is shown in the display and the transmission icon no longer appears.
To activate the RF signal:
▷
Short-press the ON/OFF button.
RF Mute Off? appears.
▷
Press the SET button.
The transmission icon appears again.
108
Using the SKP 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Auto Lock menu item”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷
Press the SET button.
▷
Press the UP or DOWN button.
Locked appears in the display panel.
Unlock? appears in the display panel.
▷
Press the SET button.
Lock-off function is now temporarily deactivated.
When you are in the operating menu
>> Lock-off function is deactivated long enough for you to work in the operating menu.
When one of the standard displays is shown
>> Lock-off function is automatically activated after 10 seconds.
The lock-off function icon flashes while the lock-off function is being activated again.
109
Using the SKP 100 G4
Displays on the SKP 100 G4 plug-on transmitter display panel
You can view the following information on the transmitter display.
►
1 AF audio level
• Displays the audio level with peak hold function
• See “Sensitivity menu item”
2 Frequency
• Configured transmission frequency
• See “Frequency Preset menu item”
3 Name
• Freely selectable name of the receiver
• See “Name menu item”
4 Transmission icon
• RF signal is being transmitted
• See “Deactivating the RF signal (RF mute)”
5 Lock-off function
• Lock-off function is activated
• See “Auto Lock menu item”
6 Battery status
• See “Inserting and removing the batteries/rechargeable batteries”
7 MUTE muting function
• The audio signal is muted
• See “Muting the plug-on transmitter (AF mute)”
8 P pilot tone
• Pilot tone transmission is activated
• See “Advanced > Pilot Tone menu item”
110
Using the SKP 100 G4
>> “Buttons for navigating the SKP 100 G4 menu”
>> “Setting options in the menu”
Select a standard display
▷
Press the UP or DOWN buttons to select a standard display.
Frequency/Name standard display
►
548.100 MHz
ew100 G4
AF
P MUTE
Channel/Frequency standard display
►
B.Ch: 20.12
548.100 MHz
AF
P MUTE
Name/Channel standard display
►
ew100 G4
B.Ch: 20.12
AF
P MUTE
111
Using the SKP 100 G4
Buttons for navigating the SKP 100 G4 menu
Navigating through the menu
To open the menu:
▷
Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷
Press the UP or DOWN buttons to navigate through the individual
menu items.
▷
Press the SET button to open the selected menu item.
“Operating elements of the SKP 100 G4 plug-on transmitter”
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷
Press the UP or DOWN buttons to set the displayed value.
▷
Press the SET button to save the setting.
▷
Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
“Operating elements of the SKP 100 G4 plug-on transmitter”
>> “Displays on the SKP 100 G4 plug-on transmitter display panel”
>> “Setting options in the menu”
112
Using the SKP 100 G4
Setting options in the menu
In the SKP 100 G4 menu, you can configure the following settings.
Adjusting the input sensitivity
▷
See “Sensitivity menu item”
Setting the frequency bank and the channel
▷
See “Frequency Preset menu item”
Entering a freely selectable name
▷
See “Name menu item”
Activating/deactivating the automatic lock-off function
▷
See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
•
Adjusting the transmission frequencies for the U frequency bank
•
Configuring the MUTE switch
•
Configuring the guitar cable emulation
•
Activating/deactivating the pilot tone evaluation
•
Adjusting the contrast of the display panel
•
Resetting the transmitter
•
Displaying the current software revision
▷
See “Advanced menu item”
113
Using the SKP 100 G4
Sensitivity menu item
•
Adjusting the input sensitivity – AF audio level
►
Setting range: 0 dB to -48 dB in 6 dB steps.
The AF audio level is also displayed when the plug-on transmitter is muted,
e.g. to check the sensitivity before a live broadcast.
Frequency Preset menu item
•
Manually selecting a frequency bank and channel
►
While you work in the Frequency Preset menu, the RF signal is deactivated.
Please note when creating multi-channel systems:
Only the factory-preset frequencies within one frequency bank are intermodulation-free. The bodypack transmitter and receiver must be set to the
same frequency. Be sure to note the information on frequency selection
under “Establishing a radio link”.
114
Using the SKP 100 G4
Name menu item
•
Entering names
►
In the Name menu item you can enter any name you want for the bodypack
transmitters (e.g. the names of the musicians).
The name can be shown in the Frequency/Name and Name/Channel standard displays.
The names are a maximum of 8 characters:
•
All letters except umlauts.
•
Numbers from 0 to 9
•
Special characters and spaces
Enter the names as follows:
▷
Press the UP or DOWN buttons to select a character.
▷
Press the SET button to switch to the next space or to save the name
you have entered once it is complete.
Auto Lock menu item
•
Switching the automatic lock-off function on and off
►
This lock prevents the wireless microphone from being unintentionally
switched off and also prevents any unintentional changes to the transmitter’s configuration. In the current standard display, the lock icon shows
whether the lock-off function is currently switched on.
You can find information about using the lock-off function under “Lock-off
function”.
115
Using the SKP 100 G4
Advanced menu item
In the Advanced submenu you can configure enhanced settings.
The following sub-items are available:
Adjusting the transmission frequencies for the U frequency bank
▷
See “Advanced > Tune menu item”
Configuring the MUTE switch
▷
See “Advanced > Mute Mode menu item”
Activating/deactivating the pilot tone evaluation
▷
See “Advanced > Pilot Tone menu item”
Adjusting the contrast of the display panel
▷
See “Advanced > LCD Contrast menu item”
Resetting the transmitter
▷
See “Advanced > Reset menu item”
Displaying the current software revision
▷
See “Advanced > Software Revision menu item”
116
Using the SKP 100 G4
Advanced > Tune menu item
•
Configuring the transmission frequency and frequency bank U
When you have configured the bodypack transmitter to a system bank and
you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears in the display. In the factory
settings, the channels of the frequency bank U are not assigned to any
transmission frequency.
While you work in the Tune menu, the RF signal is deactivated.
You can configure a transmission frequency for the current channel or select a channel in the frequency bank U and configure a transmission frequency for this channel in the Tune menu. Be sure to note the information
on frequency selection, see “Setting notes”.
Only adjusting the frequency
To configure the transmission frequency for the current channel:
▷
Open the Tune menu item in the Advanced menu.
The frequency selection appears.
►
▷
▷
Configure the desired frequency.
Press the SET button.
Your settings will be saved. You are now back in the operating menu.
Setting the channel and frequency
To select a channel and assign it a frequency:
▷
Open the Tune menu item in the Advanced menu by pressing and holding the SET button until the frequency bank selection appears.
►
▷
Set the desired channel.
▷
Press the SET button.
The frequency selection appears.
▷
Configure the frequency.
117
Using the SKP 100 G4
Advanced > Mute Mode menu item
•
Configuring the MUTE switch
►
AF On/Off mode
•
If set to position MUTE, the audio signal is muted.
RF On/Off mode
•
If set to position MUTE, the RF signal is deactivated.
Disabled mode
•
No function
You can find information about operating the mute switch under “Muting
the plug-on transmitter (AF mute)” and “Deactivating the RF signal (RF
mute)”.
Advanced > Pilot Tone menu item
•
Activating/deactivating pilot tone transmission
►
The pilot tone has an inaudible frequency that is sent from the transmitter
and evaluated by the receiver. It supports the receiver’s squelch function.
Advanced > LCD Contrast menu item
•
Adjusting the contrast of the display panel
You can configure the contrast of the display in 16 steps.
118
Using the SKP 100 G4
Advanced > Reset menu item
•
Resetting the plug-on transmitter
►
When you reset the plug-on transmitter, only the selected settings of the
pilot tone and the U frequency bank are retained.
Advanced > Software Revision menu item
•
Show software revision
You can display the current software revision.
119
Establishing a radio link
Establishing a radio link
To establish a radio link between the transmitter and receiver, the same
frequency must be set in both devices.
You can do this in a number of different ways:
1.
Use the Easy Setup function to perform an automatic frequency setup (see “Easy Setup menu item”).
2. Set a frequency in the receiver manually (see “Frequency Preset menu
item”) and synchronize it with the transmitter (see “Synchronizing devices”).
3. Set the frequency on the receiver and the transmitter manually
(EK 100 G4: “Frequency Preset menu item”, SKM 100 G4: “Frequency
Preset menu item”, SK 100 G4: “Frequency Preset menu item”, SKP 100
G4: “Frequency Preset menu item”)
Setting notes
Please note the following when synchronizing a transmitter with a receivers:
▷
Only use transmitters and receivers from the same frequency range
(see the type plate on the transmitter and receiver).
▷
Make sure that your chosen frequencies are listed in the frequency table for the particular frequency range (see “Frequency tables”).
▷
Ensure that the desired frequencies are permitted in your country and
apply for an operating license if necessary.
Please note the information at the following address:
General conditions and restrictions for the use of frequencies
120
Synchronizing devices
Synchronizing devices
You can synchronize ew 100 P G4 series transmitters and receivers via the
receiver’s infrared interface.
To synchronize the devices:
▷
▷
Switch the transmitter and the receiver on.
Call up the Sync menu item on the receiver.
Sync appears in the receiver’s display.
▷
Hold the infra-red interface of the transmitter in front of the infra-red
interface of the receiver.
The parameters are transferred to the transmitter. When the transfer is
complete, a tick appears in the receiver’s display as a confirmation.
Then the receiver will return to the current standard display.
►
To cancel synchronization:
▷
Press the ON/OFF button on the receiver.
An X appears in the display.
This icon also appears when:
•
no transmitter is found or the transmitter is not compatible.
•
no transmitter is found and the synchronization process automatically
ends after 30 seconds.
121
Overview
SPECIFICATIONS
Overview
In the sections below, you can find information about the different variants
of the products in the ew 100 P G4 series as well as technical data for the
individual products.
•
Product variants and frequency variants >> “Product variants”
•
Frequency tables with overviews of all banks and channels >> “Frequency tables”
•
Product-specific technical data >> “Specifications”
•
Information on pin assignment (jack and XLR) >> “Pin assignment”
You can also find information about safely cleaning and maintaining
evolution wireless G4 series products as well as help in the event of malfunctions.
•
“Cleaning and maintenance”
122
Product variants
Product variants
EK 100 G4 product variants
Made in Germany
►
EK 100 G4-A1
470 – 516 MHz
Art. no. 507644
EK 100 G4-A
516 – 558 MHz
Art. no. 507645
EK 100 G4-GB
606 – 648 MHz
Art. no. 507646
EK 100 G4-G
566 – 608 MHz
Art. no. 507647
EK 100 G4-B
626 – 668 MHz
Art. no. 507648
EK 100 G4-C
734 – 776 MHz
Art. no. 507649
EK 100 G4-E
823 – 865 MHz
Art. no. 507650
EK 100 G4-K+
925 – 937.5 MHz
Art. no. 507651
EK 100 G4-A1
470 – 516 MHz
Art. no. 507985
EK 100 G4-A
516 – 558 MHz
Art. no. 507986
EK 100 G4-AS
520 – 558 MHz
Art. no. 507987
EK 100 G4-G
566 – 608 MHz
Art. no. 507988
EK 100 G4-B
626 – 668 MHz
Art. no. 507989
EK 100 G4-C
734 – 776 MHz
Art. no. 507990
EK 100 G4-D
780 – 822 MHz
Art. no. 507991
EK 100 G4-JB
806 – 810 MHz
Art. no. 507992
Assembled in the USA
►
123
Product variants
SKM 100 G4 product variants
Made in Germany
►
SKM 100 G4-S-A1
470 – 516 MHz
Art. no. 507594
SKM 100 G4-S-A
516 – 558 MHz
Art. no. 507595
SKM 100 G4-S-GB
606 – 648 MHz
Art. no. 507596
SKM 100 G4-S-G
566 – 608 MHz
Art. no. 507597
SKM 100 G4-S-B
626 – 668 MHz
Art. no. 507598
SKM 100 G4-S-C
734 – 776 MHz
Art. no. 507599
SKM 100 G4-S-E
823 – 865 MHz
Art. no. 507600
SKM 100 G4-S-1G8
1785 – 1800 MHz
Art. no. 507601
SKM 100 G4-S-K+
925 – 937.5 MHz
Art. no. 507602
SKM 100 G4-A1
470 – 516 MHz
Art. no. 507660
SKM 100 G4-A
516 – 558 MHz
Art. no. 507661
SKM 100 G4-GB
606 – 648 MHz
Art. no. 507662
SKM 100 G4-G
566 – 608 MHz
Art. no. 507663
SKM 100 G4-B
626 – 668 MHz
Art. no. 507664
SKM 100 G4-C
734 – 776 MHz
Art. no. 507665
SKM 100 G4-E
823 – 865 MHz
Art. no. 507666
SKM 100 G4-1G8
1785 – 1800 MHz
Art. no. 507667
SKM 100 G4-K+
925 – 937.5 MHz
Art. no. 507668
SKM 100 G4-S-A1
470 – 516 MHz
Art. no. 507937
SKM 100 G4-S-A
516 – 558 MHz
Art. no. 507938
SKM 100 G4-S-AS
520 – 558 MHz
Art. no. 507939
SKM 100 G4-S-G
566 – 608 MHz
Art. no. 507940
SKM 100 G4-S-B
626 – 668 MHz
Art. no. 507941
SKM 100 G4-S-C
734 – 776 MHz
Art. no. 507942
SKM 100 G4-S-D
780 – 822 MHz
Art. no. 507943
SKM 100 G4-S-JB
806 – 810 MHz
Art. no. 507945
►
Assembled in the USA
►
124
Product variants
►
SKM 100 G4-A1
470 – 516 MHz
Art. no. 508001
SKM 100 G4-A
516 – 558 MHz
Art. no. 508002
SKM 100 G4-AS
520 – 558 MHz
Art. no. 508003
SKM 100 G4-G
566 – 608 MHz
Art. no. 508004
SKM 100 G4-B
626 – 668 MHz
Art. no. 508005
SKM 100 G4-C
734 – 776 MHz
Art. no. 508006
SKM 100 G4-D
780 – 822 MHz
Art. no. 508007
SKM 100 G4-JB
806 – 810 MHz
Art. no. 508008
SK 100 G4 product variants
Made in Germany
►
SK 100 G4-A1
470 – 516 MHz
Art. no. 507585
SK 100 G4-A
516 – 558 MHz
Art. no. 507586
SK 100 G4-GB
606 – 648 MHz
Art. no. 507587
SK 100 G4-G
566 – 608 MHz
Art. no. 507588
SK 100 G4-B
626 – 668 MHz
Art. no. 507589
SK 100 G4-C
734 – 776 MHz
Art. no. 507590
SK 100 G4-E
823 – 865 MHz
Art. no. 507591
SK 100 G4-1G8
1785 – 1800 MHz
Art. no. 507592
SK 100 G4-K+
925 – 937.5 MHz
Art. no. 507593
SK 100 G4-A1
470 – 516 MHz
Art. no. 507929
SK 100 G4-A
516 – 558 MHz
Art. no. 507930
SK 100 G4-AS
520 – 558 MHz
Art. no. 507931
SK 100 G4-G
566 – 608 MHz
Art. no. 507932
SK 100 G4-B
626 – 668 MHz
Art. no. 507933
SK 100 G4-C
734 – 776 MHz
Art. no. 507934
SK 100 G4-D
780 – 822 MHz
Art. no. 507935
SK 100 G4-JB
806 – 810 MHz
Art. no. 507936
Assembled in the USA
►
125
Product variants
SKP 100 G4 product variants
Made in Germany
►
SKP 100 G4-A1
470 – 516 MHz
Art. no. 507652
SKP 100 G4-A
516 – 558 MHz
Art. no. 507653
SKP 100 G4-GB
606 – 648 MHz
Art. no. 507654
SKP 100 G4-G
566 – 608 MHz
Art. no. 507655
SKP 100 G4-B
626 – 668 MHz
Art. no. 507656
SKP 100 G4-C
734 – 776 MHz
Art. no. 507657
SKP 100 G4-E
823 – 865 MHz
Art. no. 507658
SKP 100 G4-K+
925 – 937.5 MHz
Art. no. 507659
SKP 100 G4-A1
470 – 516 MHz
Art. no. 507993
SKP 100 G4-A
516 – 558 MHz
Art. no. 507994
SKP 100 G4-AS
520 – 558 MHz
Art. no. 507995
SKP 100 G4-G
566 – 608 MHz
Art. no. 507996
SKP 100 G4-B
626 – 668 MHz
Art. no. 507997
SKP 100 G4-C
734 – 776 MHz
Art. no. 507998
SKP 100 G4-D
780 – 822 MHz
Art. no. 507999
SKP 100 G4-JB
806 – 810 MHz
Art. no. 508000
Assembled in the USA
►
126
Frequency tables
Frequency tables
You can find frequency tables for all available frequency ranges in the
download section of the Sennheiser website uneer www.sennheiser.com/
download.
Download area of the Sennheiser website
Enter ew G4 into the search bar to show the frequency tables.
127
Specifications
Specifications
You can find the cross-system and product-specific technical data in the
sections below.
128
EK 100 G4
RF characteristics
►
Modulation
Wideband FM
Receiving frequency ranges
A1: 470 – 516 MHz
A: 516 – 558 MHz
AS: 520 – 558 MHz
G: 566 – 608 MHz
GB: 606 – 648 MHz
B: 626 – 668 MHz
C: 734 – 776 MHz
D: 780 – 822 MHz
TH: 794 – 806 MHz
E: 823 – 865 MHz
JB: 806 – 810 MHz
K+: 925 – 937.5 MHz
Receiving frequencies
Max 1680 receiving frequencies,
adjustable in 25 kHz steps
20 frequency banks, each with up
to 12 factory-preset channels,
no intermodulation
1 frequency bank with up to 12
programmable channels
Switching bandwidth
up to 42 MHz
Nominal/peak deviation
±24 kHz / ±48 kHz
Receiver principle
Adaptive diversity
Sensitivity (with HDX,
peak deviation)
< 1.6 μV for 52 dBA eff S/N
Adjacent channel selection
≥ 65 dB
Intermodulation attenuation
≥ 65 dB
Blocking
≥ 70 dB
Squelch
Low: 5 dBμV
Middle: 15 dBμV
High: 25 dBμV
Pilot tone squelch
Can be switched off
129
AF characteristics
►
Compander system
Sennheiser HDX
Signal-to-noise ratio (1 mV, peak
deviation)
≥ 110 dBA
Total harmonic distortion (THD)
≤ 0.9 %
AF output voltage (at peak deviation, 1 kHz AF)
3.5 mm jack socket +12 dBu (mono, unbalanced)
“AF Out” setting range
48 dB (in 6 dB steps)
Overall device
►
Temperature range
-10 °C to +55 °C (14 °F to 131 °F)
Power supply
2 AA batteries, 1,5 V or
BA 2015 accupack
Nominal voltage
3 V battery /
2.4 V rechargeable battery
Power consumption
at nominal voltage:
typically 180 mA
with transmitter switched off:
≤ 25 μA
Operating time
Typically 8 h
Dimensions
Approx. 82 x 64 x 24 mm
Weight (with batteries)
Approx. 160 g
130
SKM 100 G4
RF characteristics
►
Modulation
Wideband FM
Receiving frequency ranges
A1: 470 – 516 MHz
A: 516 – 558 MHz
AS: 520 – 558 MHz
G: 566 – 608 MHz
GB: 606 – 648 MHz
B: 626 – 668 MHz
C: 734 – 776 MHz
D: 780 – 822 MHz
E: 823 – 865 MHz
JB: 806 – 810 MHz
K+: 925 – 937.5 MHz
1G8: 1785 – 1800 MHz
Transmission frequencies
Max 1680 receiving frequencies,
adjustable in 25 kHz steps
20 frequency banks, each with up
to 12 factory-preset channels
1 frequency bank with up to 12
programmable channels
Switching bandwidth
up to 42 MHz
Nominal/peak deviation
±24 kHz / ±48 kHz
Frequency stability
≤ ±15 ppm
RF output power at 50 ?
Max. 30 mW
Pilot tone squelch
Can be switched off
AF characteristics
►
Compander system
Sennheiser HDX
AF frequency response
80 – 18,000 Hz
Signal-to-noise ratio
(1 mV, peak deviation)
≥ 110 dBA
Total harmonic distortion (THD)
≤ 0.9 %
Input voltage
3 Veff
Input impedance
40 kΩ
Input capacitance
Switchable
Setting range for input sensitivity
48 dB in 6 dB steps
131
Overall device
►
Temperature range
-10 °C to +55 °C (14 °F to 131 °F)
Power supply
2 AA batteries, 1,5 V or
BA 2015 accupack
Nominal voltage
3 V battery /
2.4 V rechargeable battery
Power consumption
at nominal voltage
with transmitter switched off
typically 180 mA
≤ 25 μA
Operating time
Typically 8 h
Dimensions
Approx. Ø 50 x 265 mm
Weight (with batteries)
Approx. 450 g
132
SK 100 G4
RF characteristics
►
Modulation
Wideband FM
Receiving frequency ranges
A1: 470 – 516 MHz
A: 516 – 558 MHz
AS: 520 – 558 MHz
G: 566 – 608 MHz
GB: 606 – 648 MHz
B: 626 – 668 MHz
C: 734 – 776 MHz
D: 780 – 822 MHz
E: 823 – 865 MHz
JB: 806 – 810 MHz
K+: 925 – 937.5 MHz
1G8: 1785 – 1800 MHz
Transmission frequencies
Max. 1680 receiving frequencies,
adjustable in 25 kHz steps
20 frequency banks, each with up
to 12 factory-preset channels
1 frequency bank with up to 12
programmable channels
Switching bandwidth
up to 42 MHz
Nominal/peak deviation
±24 kHz / ±48 kHz
Frequency stability
≤ ±15 ppm
RF output power at 50 ?
Max. 30 mW
Pilot tone squelch
Can be switched off
AF characteristics
►
Compander system
Sennheiser HDX
AF frequency response
Microphone: 80 – 18,000 Hz
Line: 25 – 18,000 Hz
Signal-to-noise ratio
(1 mV, peak deviation)
≥ 110 dBA
Total harmonic distortion (THD)
≤ 0.9 %
Max. input voltage
Microphone/line
3 Veff
Input impedance
Microphone/line
40 kΩ, unbalanced/1 MΩ
Input capacitance
Switchable
Setting range for input sensitivity
60 dB in 3 dB steps
133
Overall device
►
Temperature range
-10 °C to +55 °C (14 °F to 131 °F)
Power supply
2 AA batteries, 1,5 V or
BA 2015 accupack
Nominal voltage
3 V battery
2.4 V rechargeable battery
Power consumption
at nominal voltage
with transmitter switched off
typically 180 mA
≤ 25 μA
Operating time
Typically 8 h
Dimensions
approx. 82 x 64 x 24 mm
Weight (with batteries)
Approx. 160 g
134
SKP 100 G4
RF characteristics
►
Modulation
Wideband FM
Receiving frequency ranges
A1: 470 – 516 MHz
A: 516 – 558 MHz
AS: 520 – 558 MHz
G: 566 – 608 MHz
GB: 606 – 648 MHz
B: 626 – 668 MHz
C: 734 – 776 MHz
D: 780 – 822 MHz
E: 823 – 865 MHz
JB: 806 – 810 MHz
K+: 925 – 937.5 MHz
Transmission frequencies
Max 1680 receiving frequencies,
adjustable in 25 kHz steps
20 frequency banks, each with up
to 12 factory-preset channels
1 frequency bank with up to 12
programmable channels
Switching bandwidth
up to 42 MHz
Nominal/peak deviation
±24 kHz / ±48 kHz
Frequency stability
≤ ±15 ppm
RF output power at 50 ?
Max. 30 mW
Pilot tone squelch
Can be switched off
135
AF characteristics
►
Compander system
Sennheiser HDX
AF frequency response
80 – 18,000 Hz
Signal-to-noise ratio (1 mV, peak
deviation)
≥ 110 dBA
Total harmonic distortion (THD)
≤ 0.9 %
Input voltage
3.3 Veff
Input impedance
68 kΩ, unbalanced
Input capacitance
Switchable
Setting range for input sensitivity
48 dB in 6 dB steps
Overall device
►
Temperature range
-10 °C to +55 °C (14 °F to 131 °F)
Power supply
2 AA batteries, 1,5 V or
BA 2015 accupack
Nominal voltage
3 V battery /
2.4 V rechargeable battery
Power consumption
at nominal voltage:
typically 180 mA
with transmitter switched off:
≤ 25 μA
Operating time
Typically 8 h
Dimensions
Approx. 105 x 43 x 43 mm
Weight (with batteries)
Approx. 195 g
136
Pin assignment
Pin assignment
3.5 mm stereo jack plug
►
L R
•
Plug for headphone and earphone cables, e.g. IE 4.
•
Connect to:
• EK IEM G4
• EK 500 G4
3.5 mm mic jack plug
►
Mic
•
Plug for lavalier and headset microphone, e.g. ME 2.
•
Connect to:
• SK 100 G4
• SK 300 G4
• SK 500 G4
3.5 mm line jack plug
►
Line +
•
Plug for line and instrument cables, e.g. Ci 1-N
•
Connect to:
• SK 100 G4
• SK 300 G4
• SK 500 G4
6.3 mm stereo jack plug, balanced (audio in/loop out)
►
•
Connect to:
• SR IEM G4 Audio In
• SR IEM G4 Loop Out
137
Pin assignment
6.3 mm mono jack plug, unbalanced
►
•
Connect to:
• EM 100 G4 Audio Out
• EM 300-500 G4 Audio Out
6.3 mm stereo jack plug for headphone jack
►
L
•
R
Connect to:
• EM 100 G4 headphone input
• EM 300-500 G4 headphone input
• SR IEM G4 headphone input
XLR-3 plug, balanced
►
2
3
1
Hollow jack plug for power supply
►
138
Cleaning and maintenance
Cleaning and maintenance
Note the following information when cleaning and maintaining evolution
wireless G4 series products.
CAUTION
Liquids can damage the products’ electronics.
Liquids entering the product housing can cause a short-circuit and damage
the electronics.
▷
Keep all liquids away from the products.
▷
Do not use any solvents or cleansing agents.
▷
Disconnect the products from the power supply system and remove rechargeable batteries and batteries before you begin cleaning.
▷
Clean all products only with a soft, dry cloth.
▷
Note the special cleaning instructions below for the following products.
Cleaning the sound inlet basket of the microphone module
▷
Unscrew the top sound inlet basket from the microphone module by
turning it counterclockwise.
▷
Remove the foam insert.
You can clean the sound inlet basket in two ways:
▷
Use a slightly damp cloth to clean the top sound inlet basket from the
inside and outside.
▷
Use a brush and rinse with clean water.
▷
If necessary, clean the foam insert with a mild detergent or replace the
foam insert.
▷
Dry the top sound inlet basket and foam insert.
▷
Reinsert the foam insert.
139
Cleaning and maintenance
▷
Screw the sound inlet basket back onto the microphone module.
From time to time, you should also clean the microphone module contacts:
▷
Wipe the contacts of the microphone module with a soft, dry cloth.
140
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement