Sennheiser e 835 Spec Sheet

Sennheiser e 835 Spec Sheet

PRODUCT SPECIFICATION

evolution wired

e 835 | e 835-S 1/2

FEATURES

• Rugged metal body • Excellent feedback rejection • High sound pressure handling capability • Shock-mounted capsule provides excellent suppression of handling noise • Uniform on- and off-axis response • Cardioid pick-up pattern provides isolation from other on-stage signals • Hum compensating coil The e 835 is a cardioid lead vocal stage microphone spe cially designed to perform under pressure. Its balanced frequency response maintains signal quality when moving on and off axis during performance.

The gentle presence boost ensures vocal clarity and pro jection. The minimal proximity effect provides for consis tently clear bass-end performance when singing closer to, or further from the microphone. The cardioid pick-up pattern provides excellent feedback rejection, enablingthe microphone to handle higher sound pressure levels. The rugged metal construction and internal damping isolates handling noise. The e 835-S variant features a silent ON/ OFF switch.

SPECIFICATIONS

Transducer principle dynamic Frequency response Pick-up pattern Sensitivity (free field, at 1  kHz) Nominal impedance (at 1  kHz) 40 - 16,000 Hz cardioid 2.7 mV/Pa 350 Ω Min. terminating impedance 1 kΩ Connector XLR-3 Temperature range Dimensions Weight 0 °C to +40 °C ⌀ 48 x 180 mm 330 g

PRODUCT VARIANTS

e 835 e 835-S Art. no. 004513 Art. no. 004514

DELIVERY INCLUDES

• e 835 or e 835-S • pouch • MZQ 800 microphone clamp • quick guide • safety guide

ACCESSORIES

MZQ 800 Microphone clamp MZW 4032-A Foam windshield, an thracite MZW 4032-C Foam windshield, blue Art. no. 576183 Art. no. 002978 Art. no. 002980

PRODUCT SPECIFICATION

evolution wired

e 835 | e 835-S 2/2

DIMENSIONS

180,5 7.11" 27,28 1.07" 63,34 2.49"

POLAR PATTERN

90° 60° 120° 30° 0° 0 5 10 15 20 25 dB 0° 30° 150° 180° 180° 150° 60° 90° 120° 125 Hz 250 Hz 500 Hz 1,000 Hz 2,000 Hz 4,000 Hz 8,000 Hz 16,000 Hz

FREQUENCY RESPONSE

dBV -40 -50 -60 -70 -80 -90 50 10 0 0°, 1 m 20 0 50 0 1,0 00 2,0 00 5,0 00 10 ,00 0 20 ,00 0 Hz

ARCHITECT‘S SPECIFICATION

The microphone shall be a dynamic cardioid type designed for lead vocal stage use. It shall have a rugged metal body and a shock-mounted capsule and shall include a hum compensating coil.

The frequency response shall be 40 Hz – 16,000  Hz and the sensitivity (free field, no load) shall be 2.7 mV/Pa at 1 kHz. The nominal impedance shall be 350 Ω, with a min. terminating impedance of 1  kΩ. The microphone shall provide a 3-pin XLR connector. Dimensions shall be 48 x 180 mm (1.89" x 7.09"). Weight without cable shall be 330 grams (11.64 oz). The microphone shall be the Sennheiser e 835, the variant with a silent ON/OFF switch shall be the Sennheiser e 835- S.

Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement