Sennheiser e 901 Spec Sheet

Sennheiser e 901 Spec Sheet

PRODUCT SPECIFICATION evolution wired

e 901 1/2

DELIVERY INCLUDES • e 901 • pouch • quick guide • safety guide High-quality pre-polarised condenser microphone with half-cardioid pickup pattern, especially suitable for use with kick drums. The extremely thin, high-strength dia phragm delivers a very low bass response and fast transi ent signals. Incidental rear noise is effectively rejected.

FEATURES • Frequency response optimized for kick drum • Very fast attack • Integrated preamp and gold-plated standard XLR plug, no need for special adapter cable • No microphone stand needed for kick drum applica tions, just lay it on a towel or pillow • Handles very high sound pressure levels • Slip-free, dampening rubber pad underneath • redundant SPECIFICATIONS Transducer principle Frequency response Pick-up pattern Sensitivity (free field, at 1  kHz) Nominal impedance (at 1  kHz) pre-polarized condenser microphone 20 - 20,000 Hz half-cardioid 0.5 mV/Pa < 100 Ω Min. terminating impedance 1 kΩ Max. sound pressure level (at 1 kHz) 154 dB/SPL Phantom powering Connector Dimensions 48 V XLR-3 126.5 x 105 x 26.5 mm Weight 550 g ARCHITECT‘S SPECIFICATION The microphone shall be a half-cardioid pre-polarized condenser designed for use with kick drums. It shall have an unobtrusive, flat housing with an extremely rugged, step-resistant sound inlet basket and shall feature a rubber damping plate on the base.

The microphone shall have an integrated preamp. The frequency response shall be 20 Hz – 20,000 Hz and the sensitivity (free field, no load) shall be 0.5 mV/Pa at 1 kHz. Nominal impedance shall be less than 100 Ω, with a min. terminating impedance of 1 kΩ. Maximum SPL shall be 154  dB. The microphone shall operate on 48 V phantom power and shall provide a gold-plated 3-pin XLR connector. Dimensions shall be 126.5 x 105 x 26.5 mm (4.98" x 4.13" x 1.04"). Weight without cable shall be approximately 550 grams (19.40 oz).

The microphone shall be the Sennheiser e 901.

DIMENSIONS PRODUCT SPECIFICATION evolution wired

e 901 XLR 3 126,5 4.98" 2/2

POLAR PATTERN

90° 60° 120° 30° 0° 0 5 10 15 20 25 dB 0° 30° 150° 180° 180° 150° 60° 90° 120° 125 Hz 250 Hz 500 Hz 1,000 Hz 2,000 Hz 4,000 Hz 8,000 Hz 16,000 Hz

FREQUENCY RESPONSE

dBV -40 -50 -60 -70 -80 -90 50 10 0 0°, 1 m 0°, 5 cm 20 0 50 0 1,0 00 2,0 00 5,0 00 10 ,00 0 20 ,00 0 Hz

Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement