Proform PETL7513 760 AIR TREADMILL Owner Manual

Proform PETL7513 760 AIR TREADMILL Owner Manual
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Model No. PETL75130
Serial No.
USER'S MANUAL
Serial Number Decal
Tel:
08457 089 009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
To help us assist you, please be prepared to give the following information:
QUESTIONS?
• The MODEL NUMBER of the product (PETL75130)
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
• The NAME of the product (PROFORM® 760 AIR treadmill)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST on pages 30 and 31 and the
EXPLODED DRAWING attached in the centre of this manual)
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
Part No. 198473 R0803A
Printed in USA © 2003 ICON Health & Fitness, Inc.
Visit our website at
www.iconeurope.com
Key No. Qty.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HOW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING is attached in the centre of this manual.
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
1
1
8
1
1
1
1
44
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
Description
Console Base
Console Back
Ground Screw/Choke Screw
Key Clip
Hood
Fan
Console
Screw
Left Tray
CD Holder
Right Tray
iFIT.com Wire
iFIT.com Jack
Motor Bracket Bolt
Photo Switch Screw
Access Door
Left Handgrip (Top)
Photo Switch Nut
Left Bottom Handgrip
Right Handgrip (Top)
Right Bottom Handgrip
Pulley Nut
Pulley Washer
Idler Pulley
Small Washer
Pulley Bolt
Electronics Bracket
Key No. Qty.
128
129
130
131
132
133
134
135
136
137
138
139
#
#
#
#
#
#
#
#
#
Plastic Stand-off
Power Board
Optic Disk
Motor Isolator
Controller Bracket
On/Off Switch
Circuit Breaker
Ferrite Box
Pulse Receiver
Splitter
Chest Pulse Sensor
Chest Pulse Strap
8” Green Wire, F/Ring
8” Green Wire, 2 Ring
4” Green Wire, F/Ring
6” Blue Wire, 2F
4” Blue Wire, 2F
14” White Wire, 2F
4” White Wire, 2F
4” Black Wire, M/F
User’s Manual
* Includes all parts shown in the box
#These parts are not illustrated
Specifications are subject to change without notice.
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
2
4
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
Description
31
PART LIST—Model No. PETL75130
R0803A
To locate the parts listed below, refer to the EXPLODED DRAWING attached in the centre of this manual.
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29*
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
1
12
2
2
2
2
2
2
2
2
4
2
1
2
4
2
2
1
1
9
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
6
2
1
2
1
5
1
1
1
1
1
1
Description
Key No. Qty.
Left Foot Rail
Foot Rail Screw
Isolator Bolt (Top)
Isolator Decal
Isolator Top Cap
Isolator Spring
Isolator
Isolator Bottom Cap
Isolator Bracket Cover
Isolator Bracket
Isolator Bracket Bolt
Isolator Bolt
Walking Platform
Belt Guide
Belt Guide Screw
Walking Platform Screw (Rear)
Frame Pivot Bolt
Front Roller/Pulley
Magnet
Pivot Nut
Pivot Bushing
Reed Switch
Reed Switch Screw
Reed Switch Clip
E-Clip
Motor Tension Washer
Pulley/Flywheel/Fan
Motor Belt
Idler Arm Assembly
Idler Pivot Bolt
Motor
Idler Arm
Lift Frame
Spring
Walking Platform Nut
Idler Arm Spring
Incline Motor
Incline Motor Bolt
1/4” Washer
Roller Star Washer
Front Roller Adj. Bolt
Walking Platform Screw (Front)
Transformer
Hood Screw/Console Screw
Left Handrail
Right Handrail
Choke
Controller
Power Cord
Receptical
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89*
90
91
92
93
94
95
96
97
98
99
100
30
2
10
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
1
1
4
1
1
2
4
4
1
2
2
1
1
1
1
1
2
2
1
2
2
2
2
1
2
2
4
1
1
2
2
Description
Static Decal
3/4” Tek Screw
Belly Pan Clip
Belly Pan
Releasable Tie
Latch Pin Collar
Tie Holder Clamp
Cable Tie
Frame
Right Rear Foot
Idler Arm Washer
Rear Roller Adj, Bolt
Rear Roller
Hex Key
5/32” Hex Key
Left Rear Foot
Right Foot Rail
Walking Belt
Warning Decal
Photo Switch Star Washer
Pulse Bar
Pulse Bar Screw
Console Top
Wire Harness
Top Endcap
Console Bolt
Internal Star Washer
Photo Switch Wire
Latch Screw
1” Tek Screw
Filter Wire
Latch Housing
Controller Wire
Latch Pin
Filter
Front Isolator Screw
Front Isolator
Latch Knob
Extension Leg Assembly
Wheel Bolt
Warning Decal
Extension Leg
Small Nut
Wheel
Leveling Foot
Extension Leg Bolt
Upright
Photo Switch
Base Pad
Upright Base Endcap
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
12. Keep the power cord away from heated surfaces.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
13. Never move the walking belt whilst the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See BEFORE YOU BEGIN on page 5 if the treadmill is
not working properly.)
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and
.5 m (2 ft.) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
14. Never start the treadmill whilst you are standing on the walking belt. Always hold the
handrails whilst using the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
16. Never leave the treadmill unattended whilst it
is running. Always remove the key, unplug
the power cord, and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the location of the on/off switch.)
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should be used only by persons
weighing 115 kg (250 lbs.) or less.
17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 24.)
You must be able to safely lift 20 kg (45 lbs.) to
raise, lower, or move the treadmill.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
18. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
19. The pulse sensors are not medical devices.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The sensors are intended only as exercise aids
in determining heart rate trends in general.
10. When connecting the power cord (see page
10), plug the power cord into an earthed circuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
20. When using iFIT.com CDs and videos, an
electronic “chirping” sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
“chirp” and be prepared for speed and/or incline changes. In some instances, the speed
and/or incline may change before the personal trainer describes the change.
11. If an extension cord is needed, use only a 3conductor, 1mm2 (14-gauge) cord that is no
longer than 1.5 m (5 ft.).
3
21. When using iFIT.com CDs and videos, you
can manually override the speed and incline
settings at any time by pressing the speed
and incline buttons. However, when the next
“chirp” is heard, the speed and/or incline will
change to the next settings of the CD or
video program.
22. Remove iFIT.com CDs and videos from your
CD player or VCR when you are not using
them.
23. Inspect and properly tighten all parts of the
treadmill regularly.
24. Never insert any object into any opening.
25.
DANGER: Always unplug the power
cord immediately after use, before cleaning the
treadmill, and before performing the maintenance and adjustment procedures described in
this manual. Never remove the motor hood unless instructed to do so by an authorised service representative. Servicing other than the
procedures in this manual should be performed
by an authorised service representative only.
26. This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
CONDITIONING GUIDELINES
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.
The pulse sensors are not medical devices.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The sensors are intended only as exercise aids
in determining heart rate trends in general.
SAVE THESE INSTRUCTIONS
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
The decals shown at the right have been placed on your
treadmill. If a decal is missing or illegible, please call our
Customer Service Department to order a free replacement
decal (see ORDERING REPLACEMENT PARTS on the back
cover of this manual). Apply the decal in the location shown.
The following guidelines will help you to plan your exercise program. For more detailed exercise information, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your “training zone.” The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
To measure your heart rate during exercise, use the
pulse sensor. If your heart rate is too high or too low,
adjust the speed and incline of the treadmill.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for en-
4
ergy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in
your training zone.
For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A Warm-up—Start each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.
Training Zone Exercise—After warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exercise—never
hold your breath.
A Cool-down—Finish each workout with 5 to 10 minutes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent postexercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
29
PROBLEM: The heart rate monitor does not function properly
BEFORE YOU BEGIN
SOLUTION: a. If the heart rate monitor does not function properly, see CHEST PULSE SENSOR TROUBLESHOOTING on page 9.
b. If the heart rate monitor still does not function properly, the battery
should be changed. To replace the battery, locate the battery cover
on the back of the sensor unit. Insert a coin into the slot in the cover
and turn the cover counterclockwise to the “open” position. Remove
the cover.
Remove the old battery from the sensor unit. Insert a new CR 2032
battery, making sure that the writing is on top. In addition, make sure
that the rubber gasket is in place in the sensor unit. Replace the battery cover and turn it to the closed position.
b
Battery Cover
Thank you for selecting the revolutionary PROFORM®
760 AIR treadmill. The 760 AIR treadmill offers an impressive array of features to help you achieve your fitness goals in the convenience and privacy of your
home. And when you’re not exercising, the unique 760
AIR treadmill can be folded up, requiring less than half
the floor space of other treadmills.
ing this manual, please call our Customer Service
Department at 08457 089 009. To help us assist you,
please note the product model number and serial number before calling. The model number of the treadmill
is PETL75130. The serial number can be found on a
decal attached to the treadmill (see the front cover of
this manual for the location).
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
Before reading further, please review the drawing
below and familiarise yourself with the labeled parts.
Battery
Cover
CD Holder
Accessory Tray
Battery
Fan
Rubber
Gasket
Console
Handrail
Handgrip Pulse Sensor
Storage Latch
Key/Clip
Upright
PROBLEM: The incline of the treadmill does not change correctly
SOLUTION: a. With the key in the console, press one of the Incline buttons. Whilst the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the
maximum incline level and then return to the minimum level. This will recalibrate the incline system.
PROBLEM: The treadmill rocks during use
On/Off Switch
Circuit Breaker
Walking Belt
SOLUTION: a. See assembly step 6 on page 8.
Foot Rail
RIGHT SIDE
Cushioned Walking Platform
for maximum exercise comfort
BACK
Rear Roller
Adjustment Bolts
28
5
With the help of a second person, carefully raise the
Upright Base (97) as shown. Carefully pivot the Hood
(105) off.
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included hex keys
cutters
.
and your own phillips screwdriver
and wire
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST on pages 30 and 31. The number after the parentheses shows
the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to
one of the parts to be assembled.
Locate the Reed Switch (22) and the Magnet (19) on
the left side of the Pulley (18). Turn the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 3 mm (1/8 in.). If necessary, loosen
the Screw (23) and move the Reed Switch slightly.
Retighten the Screw. Reattach the Hood, and run the
treadmill for a few minutes to check for a correct
speed reading.
105
97
18
3 mm
23
22
19
Top
View
PROBLEM: The walking belt slows when walked on
SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm2 (14-gauge) cord that is no longer
than 1.5 m (5 ft.).
1” Tek Screw (80)–2
Extension Leg Bolt (96)–4
1/4” Washer
(39)–4
Upright Bolt (76)–4
Internal Star
Washer (77)–4
1. Make sure that the power cord is unplugged.
b
5–7 cm
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our Customer Service Department.
1
With the help of a second person, carefully raise the
Uprights (97) to the position shown. Insert one of the
Extension Legs (92) into the base of the right Upright.
(Note: It may be helpful to tip the Uprights forward as
you insert the Extension Leg.) Make sure that the
Warning Decal (91) is in the indicated location.
PROBLEM: The walking belt is off-centre or slips when walked on
SOLUTION: a. If the walking belt is off-centre, first remove the key
and UNPLUG THE POWER CORD. If the walking
belt has shifted to the left, use the hex key to turn
the left rear roller bolt clockwise 1/2 of a turn; if the
walking belt has shifted to the right, turn the bolt
counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centred.
Insert the other Extension Leg (not shown) in the
same way.
91
97
92
6
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE
POWER CORD. Using the hex key, turn both rear roller
adjustment bolts counterclockwise, 1/4 of a turn. When
the walking belt is properly tightened, you should be
able to lift each side of the walking belt 5–7 cm (2–3 in.)
off the walking platform. Be careful to keep the walking
belt centred. Plug in the power cord, insert the key, and
run the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD.
Using the hex key, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly
tightened, you should be able to lift each side of the
walking belt 5–7 cm (2–3 in.) off the walking platform.
Be careful to keep the walking belt centred. Plug in
the power cord, insert the key, and carefully walk on
the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
27
a
b
TROUBLESHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet. (See page 10.) If an extension cord is needed, use only a 3-conductor, 1 mm2 (14-gauge) cord that is no longer than 1.5
m (5 ft.). Important: The treadmill is not compatible with GFCI-equipped outlets..
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
c
d. Check the on/off switch located on the treadmill near
the power cord. The switch must be in the on position.
d
2. With the help of a second person, carefully tip the
Uprights (97) down as shown. (Note: It may be helpful to
place your foot on one of the Extension Legs [92] as you
tip the Uprights.) Make sure that the Extension Legs
remain in the Uprights.
99
80
Attach each Extension Leg (92) with two Extension Leg
Bolts (96) and two 1/4” Washers (39) as shown. Thread a
Leveling Foot (95) into the base of each Upright (97); do
not thread the Leveling Feet fully into the Uprights.
99
96
39
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the
circuit breaker has tripped, wait for five minutes and then press the switch back in.
3. Remove the Latch Knob (88) from the Latch Pin (84).
Make sure that the Latch Pin Collar (56) and the Spring
(34) are on the Latch Pin. (Note: If there are two Latch
Pin Collars, place one on each side of the Spring.) Insert
the Latch Pin into the Latch Housing (82) and tighten the
Latch Knob onto the Latch Pin.
96
92
96
97
95
92
PROBLEM: The power turns off during use
39
97
Reset
On
Position
95
80
Attach the two Base Pads (99) to the Uprights (97) in the
locations shown with two 1” Tek Screws (80).
With the help of a second person, raise the Upright Base
(97) to the vertical position.
Tripped
2
39 96
3
82
88
34
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for
five minutes, and then plug it back in.
84
56
c. Remove the key from the console. Reinsert the key fully into the console.
d. Make sure that the on/off switch is in the on position.
4. Refer to drawing 4c. With the help of a second person,
hold the Console Base (101) near the Uprights (97).
Look under the Console Base and locate the wires on
the sides of the Console Base. Make sure that the wires
are not routed through the openings for the Trays (109,
111). Drawing 4a shows the correct route for the wires.
Drawing 4b shows an incorrect route.
e. If the treadmill still will not run, please call our Customer Service Department.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and UNPLUG THE
POWER CORD. With the help of a second person,
carefully tip the Uprights (97) down as shown. Remove
the five Hood Screws (44). Note: A phillips screwdriver
with at least a 127 mm (5 in.) shaft is required.
a
44
44
97
44
Refer to drawing 4c. Cut the plastic ties holding the Wire
Harness (74) and the pulse wire in the Uprights (97).
Connect the Wire Harness and the pulse wire to the connectors on the sides of the Console Base (101). Make
sure to connect the connectors properly (see the
inset drawings). IF THE CONNECTORS ARE NOT
CONNECTED PROPERLY, THE CONSOLE MAY BE
DAMAGED WHEN THE POWER IS TURNED ON. The
connectors should slide together easily and snap
into place. If the connectors do not slide together easily
and snap into place, turn a connector and then try to insert it. Insert the excess Wire Harness and pulse wire up
into the Console Base.
4a
4b
Incorrect
Correct
4c
111
101
74
97
97
74
26
7
109
Pulse
Wire
5. Set the Console Base (101) on the Uprights (97). Thread
the four Upright Bolts (76) with four Internal Star
Washers (77) into the Uprights and the Console Base.
Be careful not to pinch the Wires (not shown) in the
Uprights. Tighten the two Upright Bolts indicated by the
arrows first; then, tighten the remaining two Upright Bolts.
HOW TO LOWER THE TREADMILL FOR USE
5
101
97
109
111
Make sure that the Left and Right Trays (109, 111) are
pressed into the Console Base (101).
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left hand, pull the latch knob to the left
and hold it. Pivot the treadmill down until the frame is past
the latch pin. Slowly release the latch knob.
Frame
77
77
76
6. Fold the treadmill to the storage position (see page 24).
Latch Knob
76
97
77
Latch Pin
2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. Do not drop the treadmill frame to the
floor. To decrease the possibility of injury, bend your
legs and keep your back straight.
6
If the Wheels (94) are resting on the floor, or if the treadmill rocks slightly, turn one or both of the Leveling Feet
(95) under the Uprights (97) until the Wheels are off the
floor and the rocking motion is eliminated. Note: If necessary, tip the treadmill and use a phillips screwdriver to
turn the Leveling Feet.
97
94
95
94
7. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking
belt (see page 27). To protect the floor or carpet, place a mat under the treadmill. If there are thin sheets of
clear plastic on the decals, remove them.
8
25
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO USE THE CHEST PULSE SENSOR
HOW TO FOLD THE TREADMILL FOR STORAGE
HOW TO PUT ON THE CHEST PULSE SENSOR
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION:
You must be able to safely lift 20 kg (45 lbs.) to raise, lower,
or move the treadmill.
each use, it may remain activated longer than necessary, draining the battery prematurely.
The chest pulse sensor consists of two components:
the chest strap and the sensor unit (see the drawing
below). Insert the tab on one end of the chest strap into
one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle
on the chest strap. The tab should be flush with the
front of the sensor unit.
1. Hold the treadmill with your hands in the locations shown at the
right. To decrease the possibility of injury, bend your legs
and keep your back straight. As you raise the treadmill,
make sure to lift with your legs rather than your back.
Raise the treadmill about halfway to the vertical position.
• Store the chest pulse sensor in a warm, dry place.
Do not store the chest pulse sensor in a plastic bag
or other container that may trap moisture.
• Do not expose the chest pulse sensor to direct
sunlight for extended periods of time; do not expose
it to temperatures above 50° C (122° F) or below
-10° C (14° F).
• Do not excessively bend or stretch the sensor unit
when using or storing the chest pulse sensor.
Chest Strap
Tabs
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the treadmill until the frame is past
the latch pin. Slowly release the latch knob. Make sure that
the frame is securely held by the latch pin.
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in
temperatures above 30° C (85° F).
Tab
CHEST PULSE SENSOR TROUBLESHOOTING
Sensor Unit
Engaged
Frame
Latch Knob
Latch Pin
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage
position as described above. Make sure that the frame is securely held by the latch pin.
1. Hold the upper ends of the handrails. Place one foot on the
base as shown.
Sensor
Unit
Buckle
The instructions on the following pages explain
how the chest pulse sensor is used with the console. If the chest pulse sensor does not function
properly, try the steps below.
Next, wrap the
chest pulse sensor around your
chest and attach
the other end of
the chest strap to
the sensor unit.
Adjust the length
of the chest strap,
if necessary. The chest pulse sensor should be under
your clothes, tight against your skin, and as high under
the pectoral muscles or breasts as is comfortable.
Make sure that the logo on the sensor unit is facing
forward and is right-side-up.
• Make sure that you are wearing the chest pulse sensor as described at the left. Note: If the chest pulse
sensor does not function when positioned as described, move it slightly lower or higher on your chest.
• Use saline solution such as saliva or contact lens
solution to wet the two electrode areas on the
sensor unit. If heart rate readings do not appear until
you begin perspiring, re-wet the electrode areas.
• As you walk or run on the treadmill, position yourself near the centre of the walking belt. For the
console to display heart rate readings, the user
must be within arm’s length of the console.
Pull the sensor unit away from your body a few inches
and locate the two electrode areas on the inner side
(the electrode areas are covered by shallow ridges).
Using saline solution such as saliva or contact lens solution, wet both electrode areas. Return the sensor unit
to a position against your chest.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution whilst moving the treadmill. Do not move the treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the treadmill
until it is resting in the storage position.
• Clean the sensor unit using a damp cloth—never
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.
Base
• The chest pulse sensor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia.
CHEST PULSE SENSOR CARE AND MAINTENANCE
• The operation of the chest pulse sensor can be
affected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.
Front Wheels
• Thoroughly dry the chest pulse sensor after each
use. The chest pulse sensor is activated when the
electrode areas are wetted and the heart rate
monitor is put on; the chest pulse sensor shuts off
when it is removed and the electrode areas are
dried. If the chest pulse sensor is not dried after
24
• The CR2032 battery may need to be replaced (see
page 28).
9
THE INFORMATION MODE/DEMO MODE
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE WALKING BELT
TM
Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric
current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-earthing conductor and an earthing plug.
Two power cords are included. Select the one that will fit your
outlet. Refer to drawing 1. Plug the indicated end of the power
cord into the socket on the treadmill. Next, lift the tab on the
ferrite box and clamp the ferrite box around the power cord.
Fasten the included plastic tie just behind the ferrite box and
cut off the excess plastic tie. This will prevent the ferrite box
from sliding along the power cord. Refer to drawing 2. Plug the
power cord into an appropriate outlet that is properly installed
and earthed in accordance with all local codes and ordinances.
Note: In Italy, an adaptor (not included) must be used between
the power cord and the outlet. Important: The treadmill is not
compatible with GFCI-equipped outlets.
1
Socket on treadmill
Ferrite Box
Plastic
Tie
Tab
2
Outlet
An “E” for English miles or an
“M” for metric kilometers will
appear in the Speed display.
Press the Speed + button to
change the unit of measurement.
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been used and the total number of miles that the walking belt has moved. The information mode also allows
you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
IMPORTANT: The Calories/Pulse display should be
blank. If a “d” appears in the display, the console is in
the “demo” mode. This mode is intended to be used
only when a treadmill is displayed in a store. When the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will automatically light in a preset sequence, although the
buttons on the console will not operate. If a “d” appears
in the Calories/Pulse display when the information
mode is selected, press the Speed – button so the
display is blank.
To select the information mode, hold down the Stop
button whilst inserting the key into the console. When
the information mode is selected, the following information will be shown:
The Distance/Incline display
will show the total number of
miles (or kilometers) that the
walking belt has moved.
To exit the information mode, remove the key from the
console.
The Time/Pace display will
show the total number of
hours the treadmill has been
used.
If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.
DANGER:
Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it
will not fit the outlet, have a proper outlet installed by a qualified electrician.
10
23
“chirping” sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the “chirp” and be
prepared for speed and/or incline changes.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
To use programs from our Web site, the treadmill must
be connected to your home computer. See HOW TO
CONNECT YOUR COMPUTER on page 19. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements is found on our Web site.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next “chirp” is
heard, the speed and/or incline will change to
the next settings of the program.
Follow the steps below to use a program from our
Web site.
1
To stop the walking belt at any time, press the
Stop button on the console. The Time/Pace display will begin to flash. To restart the program,
press the Start button or the Speed + button. After
a moment, the walking belt will begin to move at 1
mph. When the next “chirp” is heard, the speed
and incline will change to the next settings of
the program.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
2
Select the iFIT.com mode.
When the key is inserted, the manual mode
will be selected. To use
a program from our Web
site, press the iFIT.com
button. The indicator on
the button will light.
3
Go to your computer and start an internet
connection.
4
Start your web browser, if necessary, and go to
our Web site at www.iFIT.com.
5
Follow the desired links on our Web site to select a program.
8
6
9
Follow the on-line instructions to start the
program.
Clip
Key
When the program is completed, the walking belt
will stop and the Time/Pace display will begin to
flash. Note: To use another program, press the
Stop button and go to step 5.
FEATURES OF THE CONSOLE
Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard, make
sure that the iFIT.com indicator is lit and that
the Time/Pace display is not flashing. In addition, make sure that the audio cable is properly
connected, that it is fully plugged in, and that it
is not wrapped around a power cord.
When the manual mode of the console is selected, the
speed and incline of the treadmill can be changed with
the touch of a button. As you exercise, the console will
display instant exercise feedback. You can even measure your heart rate using the handgrip pulse sensor or
the chest pulse sensor.
Follow your progress with the matrix and the
displays.
See step 5 on page 12.
Read and follow the on-line instructions for using a
program.
Note: If there are thin sheets of clear
plastic on the console, remove them.
When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
cable, you can connect the treadmill to your home
stereo, portable stereo, computer, or VCR and play
special iFIT.com CD and video programs (iFIT.com
CDs and videocassettes are available separately).
iFIT.com CD and video programs automatically control
the speed and incline of the treadmill as a personal
trainer guides you through every step of your workout.
High-energy music provides added motivation. To purchase iFIT.com CDs or videocassettes, visit our
Web site at www.iFit.com.
The treadmill console offers an impressive array of
features that help you get the most from your workouts.
With the treadmill connected to your computer, you
can also go to our Web site at www.iFIT.com and access programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for
more information.
In addition, the console offers four preset programs.
Each program automatically controls the speed and incline of the treadmill as it guides you through an effective workout. Four pulse programs are also offered.
Each program automatically adjusts the speed and incline of the treadmill to keep your heart rate near a target heart rate whilst you exercise.
To use the manual mode of the console, follow the
steps beginning on page 12. To use a preset program,
see page 14. To use a pulse program, see page 16.
To use an iFIT.com CD or video program, see page
20. To use iFIT.com programs directly from our
Web site, see page 22.
The console also features iFIT.com interactive technology. Having iFIT.com technology is like having a personal trainer in your home. Using the included audio
When you start the program, an on-screen countdown will begin.
7
Return to the treadmill and stand on the foot
pads. Find the clip attached to the key and slide
the clip onto the waistband of your clothes.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking. During the program, an electronic
22
11
walking. As you exercise, change the speed of the
walking belt as desired by pressing the Speed +
and – buttons. Each time a button is pressed, the
speed setting will change by 0.1 mph; if a button
is held down, the speed setting will change in increments of 0.5 mph. To change the speed setting
quickly, press the Quick Speed buttons. Note: The
console can display speed and distance in either miles or kilometers. For simplicity, all instructions in this section refer to miles.
HOW TO TURN ON THE POWER
1
Plug in the power cord (see page 10).
2
Locate the on/off
switch on the treadmill
near the power cord.
Move the on/off switch
to the on position.
3
On
Position
To stop the walking belt, press the Stop button.
The Time/Pace display will begin to flash. To
restart the walking belt, press the Start button or
the Speed + button.
Stand on the foot rails of the treadmill. Find the clip
attached to the key (see the drawing on page 11)
and slide the clip onto the waistband of your
clothes. Next, route the cord attached to the clip
under the handgrip pulse sensor, and insert the
key into the console. After a moment, the displays
and various indicators will light. Test the clip by
carefully taking a few steps backward until the
key is pulled from the console. If the key is not
pulled from the console, adjust the position of
the clip.
Note: The first time the treadmill is used, observe
the alignment of the walking belt, and align the
walking belt if necessary (see page 27).
4
To change the incline of
the treadmill, press the
Incline + and – buttons.
Each time a button is
pressed, the incline will
change by 0.5%. To
change the incline setting quickly, press the Quick
Incline buttons.
HOW TO USE THE MANUAL MODE
1
Insert the key fully into the console.
5
See HOW TO TURN ON THE POWER above.
2
Select the manual mode.
Follow your progress with the matrix and the
displays.
• Make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord.
• If you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.
To stop the walking belt at any time, press the
Stop button on the console. The Time/Pace display will begin to flash. To restart the program,
press the Start button or the Speed + button. After
a moment, the walking belt will begin to move at 1
mph. When the next “chirp” is heard, the
speed and incline will change to the next settings of the CD or video program.
5
6
A moment after the button is pressed, the
walking belt will begin to
move at 1 mph. Hold
the handrails and begin
12
Measure your heart rate if desired.
See step 6 on page 13.
When the CD or video program is completed, the
walking belt will stop and the Time/Pace display
will begin to flash. Note: To use another CD or
video program, press the Stop button or remove
the key and go to step 1 on page 20.
7
Turn on the fan if desired.
See step 7 on page 13.
8
Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard:
When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
• Make sure that the iFIT.com indicator is lit and
that the Time/Pace display is not flashing. If
the Time/Pace display is flashing, press the
Start button or the Speed + button on the
console.
CAUTION: Always remove iFIT.com CDs and
videocassettes from your CD player and VCR
when you are finished using them.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the console may not detect the program signals.
Speed display—This
display shows the speed
of the walking belt. Note:
When the KM/H indicator is lit, the console will
display speed and distance in kilometers; when the KM/H indicator is
not lit, the console will display speed and distance
in miles.
Press the Start button or the Speed + button to
start the walking belt.
Follow your progress with the matrix and the
displays.
See step 5 on page 12.
The matrix—When the
manual mode or the
iFIT.com mode is selected, the matrix will
display a 1/4-mile track.
As you exercise, the indicators around the track
will light in succession until the entire track is lit.
The track will then darken and the indicators will
again begin to light in succession.
When the key is inserted, the manual
mode will be selected.
If you have selected a
program, select the
manual mode by pressing the Program Select
button repeatedly until a track appears in the matrix. Make sure that the indicator on the iFIT.com
button is not lit.
3
Change the incline of the treadmill as desired.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next “chirp” is
heard, the speed and/or incline will change to
the next settings of the CD or video program.
21
HOW TO CONNECT YOUR VCR
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 19.
To use iFIT.com CDs or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on pages
18 to 20. Note: To purchase iFIT.com CDs or videocassettes, visit our Web site at www.iFit.com.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
Follow the steps below to use an iFIT.com CD or video
program.
A
1
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
AUDIO OUT
RIGHT
LEFT
Audio
Cable
2
Adapter
Select the iFIT.com mode.
When the key is inserted,
the manual mode will be
selected. To use
iFIT.com CDs or videocassettes, press the
iFIT.com button. The indicator on the button will
light.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
AUDIO OUT jack on your VCR.
3
Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
4
B
ANT. IN
Press the PLAY button on your CD player or
VCR.
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
A moment after the button is pressed, your personal trainer will begin guiding you through your
workout. Simply follow your personal trainer’s
instructions. Note: If the Time/Pace display is
flashing, press the Start button or the Speed +
button on the console. The treadmill will not respond to a CD or video program whilst the
Time/Pace display is flashing.
RCA Y-adapter
Audio
Cable
Adapter
Wire removed from
AUDIO OUT jack
To change the unit of
measurement, first hold
down the Stop button
whilst inserting the key
into the console. An “E”
for English miles or an
“M” for metric kilometers will appear in the Speed
display. Press the Speed + button to change the
unit of measurement. When the desired unit of
measurement is selected, remove the key.
6
You can measure your heart rate using either the
chest pulse sensor or the handgrip pulse sensor.
To use the handgrip pulse sensor, first make
sure that your
hands are clean.
Next, stand on
the foot rails
Contacts
and hold the
handgrip pulse
sensor with your palms on the metal contacts.
Avoid moving your hands. When your pulse is
detected, two dashes (– –) will appear in the
Calories/Pulse display, and then your heart rate
will be shown. For the most accurate heart rate
reading, continue to hold the contacts for
about 15 seconds.
Calories/Pulse
display—This display
shows the approximate
numbers of calories and
fat calories you have
burned (see FAT BURNING on page 29). The
display will change from one number to the other
every few seconds. The display will also show
your heart rate when you use the handgrip pulse
sensor or the chest pulse sensor.
7
Distance/Incline display—This display
shows the distance that
you have walked or run
and the incline level of
the treadmill. The display
will change from one number to the other every
few seconds. Note: Each time the incline changes,
the display will show the incline setting for several
seconds.
Turn on the fan if desired.
To turn on the fan, press the button below the fan.
To turn on the fan at high speed, press the button
a second time. To turn off the fan, press the button a third time. Note: A few minutes after the
walking belt is stopped, the fan will automatically
turn off.
8
Time/Pace display—
When the manual mode
or the iFIT.com mode is
selected, this display will
show the elapsed time
and your current pace
(pace is measured in minutes per mile). The display will change from one number to the other
every few seconds. When a program is selected
(except for pulse program 4), the display will show
the time remaining in the program rather than the
elapsed time.
When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting
when the treadmill is folded to the storage position or the treadmill will be damaged. Next, remove the key from the console and put it in a secure place. Note: If the displays and various indicators on the console remain lit after the key is
removed, the console is in the “demo” mode.
See page 23 and turn off the demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.
To reset the displays, press the Stop button, remove the key, and then reinsert the key.
During the CD or video program, an electronic
“chirping” sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the “chirp” and be
prepared for speed and/or incline changes. In
some instances, the speed and/or incline may
change before the personal trainer describes
the change.
20
Measure your heart rate if desired.
13
The speed setting for the
Current Segment
first segment is shown in
the flashing Current
Segment column of the
matrix. (The incline settings are not shown in
the matrix.) The speed
settings for the next
seven segments are
shown in the seven columns to the right.
HOW TO USE PRESET PROGRAMS
1
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on
page 12.
2
Select one of the preset programs.
When the key is inserted, the manual mode
will be selected. To select a preset program,
press the Program
Select button repeatedly
until a “P 5,” “P 6,” “P 7,” or “P 8” appears in the
Distance/Incline display.
When only three seconds remain in the first segment of the program, both the Current Segment
column and the column to the right will flash and a
series of tones will sound. If the speed and/or incline of the treadmill is about to change, the Speed
display and/or the Distance/Incline display will
flash to alert you. When the first segment ends, all
speed settings will move one column to the left.
The speed setting for the second segment will then
be shown in the flashing Current Segment column
and the treadmill will automatically adjust to the
speed and incline settings for the second segment.
Note: If all of the indicators in the Current Segment
column are lit after the speed settings have moved
to the left, the speed settings may move downward
so that only the highest indicators appear in the
matrix. If some of the indicators in the Current
Segment column are not lit when the speed settings move to the left again, the speed settings will
move back up.
When a preset program is selected, the Speed
display will flash the maximum speed setting of
the program for a few seconds. The Time/Pace
display will show how long the program will last.
The matrix will show
the first seven speed
settings of the program.
Note: The diagrams
numbered 5 through 8
on the left side of the
console show how the
speed and incline will change during the preset
programs. For example, diagram number 8 shows
that during preset program 8, the speed will gradually increase during the first half of the program
and then gradually decrease during the last half;
the incline will remain constant.
The program will continue in this way until the
speed setting for the last segment is shown in the
Current Segment column of the matrix and the
last segment ends. The walking belt will then slow
to a stop.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 3.5 mm LINE OUT
jack, see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the adaptor. Plug the
adaptor into the LINE OUT jack on your stereo.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A
A
CD
VCR
LINE OUT
Amp
LINE OUT
LINE OUT
Audio
Cable
Audio
Cable
Adaptor
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the adaptor. Plug the
adaptor into an RCA Y-adaptor (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
Y-adaptor. Plug the Y-adaptor into the LINE OUT
jack on your stereo.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the splitter. Plug the splitter into the PHONES jack on your computer. Plug
your headphones or speakers into the other side of
the splitter.
B
PHONES
B
CD
Audio
Cable
VCR
3
If the speed or incline setting is too high or too low
at any time during the program, you can manually
override the setting by pressing the Speed or
Incline buttons. Every few times a Speed button is
pressed, an additional indicator will light or darken
in the Current Segment column. (If any of the
columns to the right of the Current Segment column have the same number of lit indicators as the
Current Segment column, an additional indicator
may light or darken in those columns as well.)
Note: When the next segment of the program
begins, the treadmill will automatically adjust
to the speed and incline settings for the next
segment.
Press the Start button or the Speed + button to
start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings of the program. Hold the handrails
and begin walking.
Each program is divided into several time segments of different lengths. One speed setting and
one incline setting are programmed for each segment. Note: The same speed setting and/or incline setting may be programmed for two or more
consecutive segments.
14
Amp
Splitter
LINE OUT
Headphones/Speakers
Audio
Cable
RCA
Y-adaptor
Adaptor
Wire removed from
LINE OUT jack
19
HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER
To use iFIT.com CDs, the treadmill must be connected
to your portable CD player, portable stereo, home
stereo, or computer with CD player. See pages 18 and
19 for connecting instructions. To use iFIT.com videocassettes, the treadmill must be connected to your
VCR. See page 20 for connecting instructions. To use
iFIT.com programs directly from our Web site, the
treadmill must be connected to your home computer.
See page 19 for connecting instructions.
To stop the program at any time, press the Stop
button. The Time/Pace display will begin to flash.
To restart the program, press the Start button or
the Speed + button. The walking belt will begin to
move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust
to the speed and incline settings for the next segment.
HOW TO CONNECT YOUR PORTABLE STEREO
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5 mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the adaptor. Plug the
adaptor into an AUDIO OUT jack on your stereo.
4
A
5
LINE OUT
Follow your progress with the displays.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.
Measure your heart rate if desired.
RIGHT
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
PHONES LINE OUT
When the program has ended, make sure that
the incline of the treadmill is at the lowest setting. Next, remove the key from the console and
put it in a secure place. Note: If the displays and
various indicators on the console remain lit
after the key is removed, the console is in the
“demo” mode. See page 23 and turn off the
demo mode.
See step 6 on page 13.
AUDIO OUT
A
LEFT
Audio
Cable
6
Adaptor
Turn on the fan if desired.
See step 7 on page 13.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
PHONES
B
Headphones
Audio
Cable
LINE OUT
Audio
Cable
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the splitter. Plug the splitter into the PHONES jack on your CD player. Plug
your headphones into the other side of the splitter.
B
C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the splitter. Plug the splitter into the PHONES jack on your stereo. Plug your
headphones into the other side of the splitter.
PHONES
C
PHONES
Audio
Cable
When you are finished exercising, remove the
key from the console.
See step 5 on page 12.
HOW TO CONNECT YOUR PORTABLE CD PLAYER
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.
7
Splitter
PHONES
Audio
Cable
Headphones
Splitter
Headphones
18
15
During pulse programs,
the matrix will show a
moving graphic that represents your heart rate.
Each time a heartbeat is
detected, an additional
peak will appear.
HOW TO USE PULSE PROGRAMS
CAUTION:
If you have heart problems, or if you are over 60 years of age and
have been inactive, do not use the pulse programs. If you are taking medication regularly,
consult your physician to find whether the
medication will affect your exercise heart rate.
1
4
When a pulse program
is selected, the word
“AGE” and the current
age setting will flash in
the Calories/Pulse display. If you have already
entered your age, simply
press the Enter button. If you have not entered
your age, press the + and – buttons beside the
Enter button to enter your age. Then, press the
Enter button.
Put on the chest pulse sensor.
You must wear the chest pulse sensor to use a
pulse program. See the instructions on page 9.
2
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on
page 12.
3
Enter your age.
5
Select a pulse program.
Enter a target heart rate.
If pulse program 1, 2, or 3 is selected, go to
step 6. If pulse program 4 is selected, follow
the instructions below.
When the key is inserted,
the manual mode will be
selected. To select a
pulse program, press the
Program Select button
repeatedly until a “P 1,”
“P 2,” “P 3,” or “P 4” appears in the Distance/
Incline display.
After you have entered
your age, the letters
“PLS” and the target
heart rate setting for the
program will flash in the
Calories/Pulse display. If
desired, press the + and
– buttons beside the Enter button to adjust the target heart rate setting. When the desired setting is
shown, press the Enter button.
The diagrams numbered 1 through 4 on the left
side of the console show how the target heart rate
will change during the programs. During pulse
program 1, your heart rate will reach approximately 85% of your estimated maximum heart
rate; during pulse programs 2 and 3, your heart
rate will reach approximately 80% of your estimated maximum heart rate; during pulse program
4, your heart rate will remain near a level that you
select.
6
7
If the speed or incline setting is too high or too low
at any time during the program, you can adjust the
setting with the Speed or Incline buttons. However,
each time the console compares your heart rate to
the current target heart rate, the speed and/or incline of the treadmill may automatically change to
bring your heart rate closer to the target heart rate.
Press the Start button or the Speed + button to
start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings of the program. Hold the handrails
and begin walking.
If your pulse is not detected during the program,
the letters “PLS” will flash in the Calories/Pulse
display and the speed and incline of the treadmill
may automatically decrease until your pulse is detected. If this occurs, see CHEST PULSE SENSOR TROUBLESHOOTING on page 9.
Each pulse program is divided into several time
segments of different lengths. One target heart rate
is programmed for each segment. Note: If pulse
program 4 is selected, the same target heart rate
is programmed for all segments.
During each segment, the console will regularly
compare your heart rate to the current target heart
rate. If your heart rate is too far below or above
the target heart rate, the speed of the treadmill will
automatically increase or decrease to bring your
heart rate closer to the target heart rate. If the
speed reaches the maximum speed setting of the
program (see step 6 on page 16) and your heart
rate is still too far below the current target heart
rate, the incline of the treadmill will also increase
to bring your heart rate closer to the target heart
rate.
To stop the program at any time, press the Stop
button. Pulse programs cannot be stopped temporarily and then restarted. To use a pulse program again, reselect the program and start it at
the beginning.
8
See step 5 on page 12.
9
During the last three seconds of each segment, a
series of tones will sound and the Speed display
and the Distance/Incline display will flash.
16
Turn on the fan if desired.
See step 7 on page 13.
10
The program will continue until the last segment
ends. The walking belt will then slow to a stop.
When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
Enter a maximum speed.
Next, the letters “SPd”
and the maximum speed
setting of the program
will flash in the Calories/
Pulse display. If desired,
press the + and – buttons beside the Enter
button to adjust the maximum speed setting.
When the desired setting is shown, press the
Enter button.
Note: Your estimated maximum heart rate is determined by subtracting your age from 220. For
example, if you are 30 years old, your estimated
maximum heart rate is 190 beats per minute
(220 – 30 = 190).
Follow your progress with the displays.
17
EXPLODED DRAWING—Model No. PETL75130
2
4
27
28
127
36
32
30
3
R0803A
To identify the parts shown on this EXPLODED
DRAWING, refer to the PART LIST on pages 30
and 31 of the user’s manual.
103
128
31
29*
61
20
122
126
2
129
114
103
26
123
124
103
1
23
22
9
24
128
105
47
86
2
5
10
6
21
17
87
20
19
131
37
118
98
18
14
11
8
85
43
42
11
7
20
41
44
39
125
2
33
38
4
15
44
40
115
3
130
21
20
38
12
103
20
13
69
103
68
2
17
42
16
35
78
86
67
83
48
87
2
81
132
5
39
54
14
62
59
63 16
53
15
6
40
133
52
44
53
134
7
66
39
52
69
135
49
53
8
50
40
35
62
65
44
103
51
9
52
60
64
55
11
10
52
11
12
93
108
58
112
57
52
52
44
EXPLODED DRAWING—Model No. PETL75130
R0803A
112
109
108
113
110
75
73
77
79
137
76
74
102
75
84
82
108
111
136
56
88
138
108
71
139
108
108
34
25
108
108
103
108
108
77
101
76
108
108
108
108
108
108
108
108
108
108
51
108
108
100
38
116
117
107
108
20
44
99
80
89*
90
91
108
20
38 75
108
39
96
97
92
20
100
103
106
108
104
108
45
108
108
46
95
99
80
94
89*
119
44
108
108
120
108
20
39
91
108
96
108
108
92
90
94
95
121
108
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement