Zoom B1 FOUR Bass Multi-Effects Processor Manual

Zoom B1 FOUR Bass Multi-Effects Processor Manual
Version 2.0 Supplementary Manual
The following functions have been added and changed in firmware version 2.0.
Changing the looper position
The looper can now be placed either before or after the effect. By changing the looper
position to before the effect, the looped sound of a performance can be used to craft
the sound without continuing to play.
1.
Activate the looper.
・Press
Patch memory
Return to previous mode: Press
IN
Looper
1
Pre
2.
2
3
4
5
Looper
OUT
Post
Effect
Change the looper position.
・Turn
Setting
Explanation
Pre
The looper is positioned before the effects.
Post
The looper is positioned after the effects.
NOTE
Changing the recording time, loop or position or tempo will clear any loop that has been recorded.
HINT
The tempo (BPM) setting available up to firmware version 1.1 can be changed using the rhythm or from SETTING > SETUP.
Setting value display during rhythm playback
Rhythm settings can now also be checked during rhythm playback.
Before Version 1.1
Stopped
After Version 2.0
Playing
Playing/stopped
© 2019 ZOOM CORPORATION Z2I-3831-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement