Channel Vision 6305 Instruction Manual
PDF
Download
Document
Advertisement
Advertisement
CHANNEL VISION Limited Warranty Model 6305 Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided. Color Bullet Camera Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton. This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center. 500-035 234 FISCHER AVENUE • COSTA MESA, CA 92626 (714) 424-6500 • (800) 840-0288 • (714) 424-6510 fax www.channelvision.com • email: [email protected] © 2004, CHANNEL VISION™ Model 6305 Front view Side view Features: 1/4” Sony Color CCD Mounting screws (3) 330 Lines Of Resolution Mount extension 0.5 Lux Sensitivity 3.6mm Lens Coax extension (not included) Video (BNC connector) Universal Swivel Mount Included Weatherproof Sun Shield Included Power 2-Conductor power supply extension (not included) To Monitor or Video distribution Crimp-on splice connectors (not included) Specifications: Power supply (included) Installation: hAttach the camera mount to a wall or ceiling using the 3 screws provided. hDrill a hole in the wall or ceiling for wiring (see diagram). hIf necessary, attach the camera’s video output to a coax extension that is long enough to reach your monitor or video distribution equipment. hIf necessary,cut the connector off of the end of the power supply and splice in an extension using crimp-on connectors. 2 Power Supply Included Camera Lens: 3.6mm Resolution: 330 lines S/N Ratio: More than 48 dB Min Illumination: 0.5 LUX @ F2.0 Power Supply: 12VDC regulated Power Consumption: 120 mA Video Output: 1 Vp-p @ 75 ohms Dimensions: 3.9”L x 1.4” W x 1.2” H Operating Temp: -10°C to 50°C (14°F to 122°F) Specifications subject to change without notice. 3 ">

Public link updated
The public link to your chat has been updated.
Advertisement