York VANE AXIAL 用户指南

York VANE AXIAL 用户指南

Heavy Duty Vaneaxial Fan

AV-Series

TABLE OF CONTENTS 3 Introduction, Certifications & Listings 4 Features & Benefits 5 Options & Accessories 6 Direct Drive Dimensional & Performance Data 18 Belt Drive Dimensional & Performance Data 30 Engineering Specifications

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

INTRODUCTION

YORK® by Johnson Controls quietest fans.

AV Series

(AVD and AVB) product line is the perfect choice when high volume, compact size, superior quality and long lasting fans are needed. These AMCA licensed products are among the most efficient and YORK® by Johnson Controls less expensive. Of course, all direct drive Vaneaxial fans use industry-standard foot mounted motors, while most competitor’s motors require special shafts and “C” face mounting. That fact makes our products some of the best on the market. In addition, if there is ever a need to replace the motor, these standard motors are readily available and YORK® by Johnson Controls fans are balanced to an industry-leading level. Simply stated, YORKS's Vaneaxial products lead the industry in every category. • Sizes 012 through 060 • Volumes exceeding 120,000 CFM • Static pressure to 7" w.g.

• Operational tip speeds to 22,000 FPM • Power requirements under 150 HP • Mechanical efficiences exceeding 85% • Each unit dynamically balanced and factory tested prior to shipment • Motor frame sizes available to 405T

Saves Valuable Space

The advent of smaller equipment rooms demands effective use of space. AV Series fans provide the most compact air moving equipment available.

Reduces Construction Costs

The inherent lower weight and effective balance of vaneaxial fans permit considerable reduction in structural mounting requirements. Because the “vaneaxial package” is much smaller than corresponding centrifugal designs, installation costs are significantly reduced.

Reduces Design Costs

AV Series fans have unlimited mounting possibilities in either horizontal and vertical positions and allow the designer more latitude in mechanical design. These fans require much less of the designer’s time in design analysis and layout stages compared to centrifugal fans.

Meets Medium Pressure System Criteria

Since the air directed from vaneaxials is in a straight path, they develop: • Higher static pressures than other axial fans • Higher capacity in low pressure ranges • Lower sound levels than other axial types • Maximum efficiency over wide range • Maximum horsepower utilization over a wider operating range

Belt Drive Unit with Optional Motor Cover Direct Drive Unit with Optional Full Access Construction

CERTIFICATIONS & LISTINGS

AMCA Certification

YORK® by Johnson Controls certifies that the Vaneaxial fans shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

UL Certification

AV Series model AVD will carry the cUL mark for the following: • UL705 Power Ventilators (ZACT, ZACT7), File #E256857.

• UL Power Ventilators for Smoke Control Systems (ZAXH, ZAXH7), File #MH10148.

3

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

FEATURES & BENEFITS

YORK® by Johnson Controls AV Series fan housings are constructed of heavy-gauge, continuously welded steel with bolt holes in the inlet and outlet flanges for easy duct connection. Neither motor nor wheel protrude outside of the casing. A bolt-on straightening vane section is mounted on the discharge end of the fan housing.

Motors are standard NEMA-T frame, readily available in ODP, TEFC or EXP enclosures. All motors and electrical components comply with NEMA, UL and CSA guidelines.

The AVD and AVB propeller utilizes leading-edge airfoil technology with unique high strength airfoil blades and 319F cast aluminum spherical hubs. The propellers are constructed with industrial certified welds per AWS standards. The hub is secured to the fan or motor shaft using a key and taper lock

AVD and AVB Propeller Belt Drive Unit with Optional Motor Cover Direct Drive Unit with Optional Full Access Construction

bushing. They are dynamically balanced to quality grade G-6.3 using state of the art balancing equipment.

Direct drive models have a selective pitch variance between 12 and 30 degrees. All sizes have motor leads extended to the exterior of the fan casing.

Belt drive models offer continuous motor adjustment and belt tensioning. The power transmission components are isolated from airstream contaminants. The bearing and belt tube section is fully welded and has a removable end cover to allow access to the bearings and drive sheave. Extended lube lines are supplied for routine lubrication. Fan bearings are re-greasable and self aligning, with a minimum L10 life of 40,000 hours.

OPTIONS & ACCESSORIES

Swing Out Design

SwingOut design fans enable routine cleaning and maintenance operations to be performed without removing the fan from the system. This is accomplished by hinging the casing and allowing the serviceable components to “swingout” with the hinged section while the casing remains attached to the ductwork. By providing quick and easy access to all internal parts, including the motor, shaft, propeller and bearings, maintenance is greatly simplified and costly downtime is minimized. This design is available for vertical mounting.

4

SMALLER UNITS SWING-OUT FULL ACCESS ADDITIONAL SUPPORT WILL BE ADDED AS REQUIRED LARGER UNITS

Full Access Design

Quick access to the fan interior is accomplished by a hinged outer section. This section opens 180° to provide plenty of room and freedom for most types of maintenance or service tasks. All internal parts can be accessed via a removable access panel, enabling the wheel, shaft and bearings to be removed as a complete unit. This feature will save many hours of maintenance costs since the fan need not be removed from the system to keep it clean and operating efficiently. This design is available for horizontal ceiling hung and vertical mounting installations.

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

OPTIONS & ACCESSORIES

Inlet/Outlet Cones

Inlet cones do not affect fan performance but are used to match the size of the inlet duct to the fan casing, when the latter is of a different size.

The outlet cone expands the casing to fit the usual duct size and converts the excess velocity to useful pressure.

Disconnect Switch

NEMA 1, 3R, 4X and 7/9 disconnect switches are offered. All disconnect switches are available mounted and unwired, mounted and wired (except NEMA 7/9), or shipped loose.

Inlet/Outlet Cone Motor Cover

Motor Cover

Motor covers, which are used for all weather protection, enclose the motor, motor sheave and belts.

Variable Inlet Vanes

Air volume control device mounted on the fan inlet. It is composed of several blades mounted radially on shafts. The position of the blades may be changed by rotating the shafts, and the area through which the air passes is increased or decreased as required. The variable inlet vane also acts to pre-spin the air as it enters the fan. The maximum velocity is 3000 FPM, the maximum pressure at block-off is 7" SP and the maximum temperature is 250°F. A manual lever is included.

Disconnect Switch Access Door

Access Door

Access doors are mounted on a fan to provide access to the fan interior for maintenance inspection.

Belt Guard

Belt guard with 1/2" expanded metal safety guard enclosing motor sheave and belts. A belt guard is not needed when a motor cover is ordered.

Variable Inlet Vane Inlet/Outlet Guard

Inlet/Outlet Guards

Guards are to be used with an open inlet or outlet. Inlet/ outlet guards repel foreign matter and provide safety.

Inlet/Outlet Screens

Screens are 1/2" expanded metal welded to rings. Inlet/ outlet screens can be bolted between the fan and inlet bell or duct without leakage.

High Temperature Package

PennBarry’s vaneaxial line is available with several options for higher temperature applications, including UL Smoke Control Systems. Consult factory for more details.

Belt Guard

5

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

018 - 060

| DIRECT DRIVE DIMENSIONAL DATA ‘H’ DIA. & QUANTITY N N (OPTIONAL) JUNCTION BOX 2.00

‘A’ I.D.

‘B’ B.C.

‘C’ O.D.

F (OPTIONAL) VERTICAL MOUNTING LEGS INLET OR DISCHARGE END (4 EQ. SP. W/ 0.563 X 1.00 SLOTS) E D (OPTIONAL) BASE MOUNTING LEGS 0.563 X 1.00 LONG SLOTS (4) (OPTIONAL) ACCESS DOOR ‘J’ GAGE (OPTIONAL) HORIZONTAL CEILING CLIPS VANE SECTION M K P AIRFLOW P (OPTIONAL) HORIZONTAL CEILING CLIPS K L

Size

018 021 024 030 036 042 048 054 060

A B C D E F

18.19 19.81

21.19 17.00 15.00 14.50

21.22 22.97 24.22 20.00

18.00

16.00

24.25 26.06 27.25 22.00

18.00 18.00

30.31 32.19 33.31 29.00 25.00 21.50

H

.438-8 .438-8 .438-8 .438-8 54.56 57.00

58.56

52.00

48.00

36.25 .563-16 60.63 63.00 64.63 56.00 52.00 39.25 .563-16

J K 48 56 143 145 182 184 L, Motor Frame Size 213 254

12 1.71 23.63 23.63 29.63 29.63

254 256

284 286

— 12 1.71

12 1.71

12 1.71

24.38 24.38 30.38 30.38

31.38 31.38 31.38 31.38 37.38

— — — — 33.06 33.06 33.06 33.06 39.06

36.38 38.19 39.38

42.44

44.81

35.00 31.00 25.00

.438-16 10 1.73

46.44 40.00 36.00 29.00 .563-16 10 1.73

48.50 50.88

52.50 46.00 42.00 33.25 .563-16 10 1.73

7 7 1.78

1.78

— — — — — 35.13 35.13 35.13 41.13 47.13 47.13

— — — — 36.69 42.69 42.69

38.50

— — — — 52.31 52.31

324 326

— — — — 48.69 48.69

364 365

— — — — — — 44.50 44.50 50.50 50.50 50.50

58.31 58.31

404 405

— — — — — — — 54.31 54.31 60.31 60.31 66.31

M

5.63 10.16 3.10

6.38

7.38

9.06 16.74 3.10

11.13 19.75 3.13

12.69

64.31 16.31

N

12.17 3.10

13.69 3.10

23.28

P

3.13

14.50 26.31 3.13

29.38 3.18

18.31 32.38 3.18

Unit Weight

130 170 250 350 600 800 1000 1700 2000

Approximate fan weights are less motor and accessories. Propeller is eight-bladed cast aluminum. Dimensions should not be used for construction. Certified drawings are available upon request. Contact factory for details on UL Smoke Control applications.

6

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

012 - 060

| BELT DRIVE DIMENSIONAL DATA N N (OPTIONAL) MOTOR COVER ‘H’ DIA. & QUANTITY ‘G’ MAX.

2.00

F (OPTIONAL) VERTICAL MOUNTING LEGS INLET OR DISCHARGE END (4 EQ.SP. W/0.563 X 1.00 SLOTS) E D ‘A’ I.D.

‘B’ B.C.

‘C’ O.D.

E

E Discharge View (see notes)

(OPTIONAL) HORIZONTAL CEILING BRACKET (D AND F) & BASE MOUNTING LEGS (A,B, AND H) 0.563 X 1.00 LONG SLOTS (4) HORIZONTAL CEILING CLIPS (FOR MOTOR POSITIONS A AND E ONLY) P BELT GUARD (OPTIONAL) ‘J’ GAGE EXTENDED LUBE LINES AIRFLOW HORIZONTAL CEILING CLIPS (FOR MOTOR POSITIONS A AND E ONLY) VANE SECTION M K K L

Size

012 015 018 021 024 030 036 042 048 054 060

A

12.19

15.19

18.19

21.22

24.25

30.31

36.38

42.44

48.50

54.56

60.63

B

13.50

16.50

19.81

22.97

26.06

32.19

38.18

44.81

50.88

57.00

63.00

C

14.38

17.44

21.19

24.22

27.25

33.31

39.38

46.44

52.50

58.56

64.63

D

11.00

14.00

17.00

20.00

22.00

29.00

35.00

40.00

46.00

52.00

56.00

E

9.00

12.00

15.00

18.00

18.00

25.00

31.00

36.00

42.00

48.00

52.00

F

11.00

13.00

14.50

16.00

18.00

21.50

25.00

29.00

33.25

36.25

39.25

G H

26.00

27.50

30.00

31.50

36.25

40.25

44.75

.438-8 .438-8 .438-8 .438-8 .438-8 .438-8 .438-16 49.25 .563-16 54.25 .563-16 57.25 .563-16 60.25 .563-16

J

10 10 7 7 14 12 12 12 12 12 10

K

1.68

1.71

1.71

1.71

1.71

1.71

1.73

1.73

1.73

1.78

1.78

Design 1 L, Motor Frame Size Max. Motor Design 2 Max. Motor

29.63

184 — — 29.63

33.63

34.38

184 215 215 — — — — — — 35.38

37.06

47.13

215 215 256 39.38

45.06

53.13

286 286 326 48.69

56.50

64.31

66.31

256 286 286 286 54.69

62.50

70.31

72.31

326 405 405 405

M

5.63

5.63

5.63

6.38

7.38

9.06

11.13

12.69

14.50

16.31

18.31

N

7.19

8.69

10.16

12.17

13.69

16.74

19.75

23.28

26.31

29.38

32.38

P

3.08

3.10

3.10

3.10

3.10

3.10

3.13

3.13

3.13

3.18

3.18

Unit Weight

Approximate fan weights are less motor, drive and accessories. Propeller is eight-bladed cast aluminum. Base mounting legs are used for motor positions A, B and H. Horizontal ceiling brackets are used for motor positions D and F. Horizontal ceiling clips are used for motor positions A and E. For horizontal ceiling motor positions C and G, see page. Dimensions should not be used for construction. Certified drawings are available upon request.

120 150 200 250 350 550 850 1050 1400 2100 2500 7

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

012 - 060

| OFFSET CEILING HANGERS DIMENSIONAL DATA A A E B E B B E B E A A D D D D ‘F’ DIA. & QTY. MOUNTING HOLES

VIEW FACING DISCHARGE MOTOR POSITION ‘C’

VANE SECTION C 0.81 DIA. HOLE C

VIEW FACING DISCHARGE MOTOR POSITION ‘G’

8 M E

E Discharge View (see notes)

L

Size A B C D E F L, Motor Frame Size Max. Motor

184 184 215 215 215 215 256 256 286 286 286

Design 2

— — — — 39.38

45.06

53.13

54.69

62.50

70.31

72.31

Max. Motor

— — — — 286 286 326 326 405 405 405

M

5.63

5.63

5.63

6.38

7.38

9.06

11.13

12.69

14.50

16.31

18.31

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

018

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

18 in.

Maximum RPM

3450

Tip Speed (FPM)

4.71 x RPM

Bare Fan Weight

130 lbs.

Inlet/Outlet Diameter (Area)

18.19 in. (1.80 sq. ft.)

RPM

1150 1750 3450

RPM

3450

Pitch

12 18 24 30 12 18 24 30 12 18 24 30 12 18 24 30

Pitch 0" SP CFM

1858 2482 2917 3521 2828 3777 4439 5358 5575 7446 8751 10563

2 1/2" SP BHP

0.07

0.12

0.17

0.27

0.26

0.42

0.6

0.93

1.98

3.21

4.6

7.16

CFM

4292 6145 7385 9081

BHP

2.92

4.56

5.76

8.63

1/4" SP CFM

1489 2098 2513 3084 2602 3534 4180 5090 5457 7322 8624 10435

3" SP BHP

0.1

0.16

0.21

0.32

0.3

0.47

0.66

1.01

2.06

3.25

4.67

7.22

CFM

3841 5802 7047 8709

BHP

3.04

4.73

5.85

8.81

1/2" SP CFM

785 974 1528 2408 2359 3281 3914 4795 5342 7199 8489 10297

3 1/2" SP BHP

0.12

0.17

0.2

0.33

0.35

0.55

0.72

1.09

2.14

3.35

4.78

7.38

CFM

3262 5345 6646 8293

BHP

3.07

4.74

5.96

8.90

3/4" SP CFM

1993 2975 3606 4451 5229 7076 8357 10159

4" SP BHP

0.39

0.58

0.77

1.15

2.23

3.48

4.91

7.55

CFM

2763 4191 6111 7818

BHP

3.09

4.48

5.96

8.93

-

-

1" SP CFM

1453 2386 3172 4024 5117 6953 8226 10018

BHP

0.4

0.61

0.78

1.16

2.33

3.63

5.05

7.72

-

-

-

-

1 1/4" SP CFM

5002 6829 8095 9875

BHP

2.43

3.79

5.18

7.9

-

-

-

-

1 1/2" SP CFM

4883 6702 7962 9727

BHP

2.53

3.96

5.32

8.07

-

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

-

-

CFM

4618 6437 7685 9417

2" SP BHP

2.73

4.28

5.56

8.38

-

9

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

021

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

24 in.

Maximum RPM

3450

Tip Speed (FPM)

6.28 x RPM

Bare Fan Weight

250 lbs.

Inlet/Outlet Diameter (Area)

24.25 in. (3.21 sq. ft.)

RPM

1150 1750 3450

RPM

3450

Pitch

12 18 24 30 12 18 24 30 12 18 24

Pitch

12 18 24

0" SP CFM

2951 3941 4632 5591 4491 5998 7049 8508 8853 11824 13897

BHP

0.16

0.26

0.37

0.57

0.56

0.91

1.30

2.02

4.29

6.94

9.95

2 1/2" SP CFM

7478 10363 12350

BHP

5.76

9.04

11.86

1/4" SP CFM

2544 3506 4170 5100 4225 5714 6747 8199 8716 11680 13753

BHP

0.21

0.33

0.43

0.65

0.63

0.98

1.38

2.12

4.42

6.99

10.04

3" SP CFM

7138 10039 12014

BHP

6.07

9.52

12.21

1/2" SP CFM

1847 2935 3606 4478 3961 5428 6444 7870 8579 11535 13593

BHP

0.25

0.38

0.48

0.71

0.71

1.10

1.49

2.26

4.54

7.12

10.20

3 1/2" SP CFM

6728 9686 11655

BHP

6.35

9.92

12.50

3/4" SP CFM

3652 5121 6124 7511 8446 11391 13438

BHP

0.79

1.23

1.59

2.39

4.67

7.29

10.40

4" SP CFM

6202 9287 11261

BHP

6.55

10.20

12.71

1" SP CFM

3213 4759 5759 7105 8315 11248 13284

BHP

0.85

1.32

1.65

2.47

4.82

7.50

10.60

4 1/2" SP CFM

5541 8804 10817

BHP

6.62

10.29

12.84

1 1/4" SP CFM

2565 4239 5302 6631 8184 11105 13131

BHP

0.86

1.33

1.68

2.51

4.97

7.73

10.81

5" SP CFM

4881 8135 10293

BHP

6.63

10.12

12.89

1 1/2" SP CFM

2035 2546 4516 6046 8052 10961 12978

BHP

0.88

1.35

1.68

2.52

5.12

7.98

11.03

5 1/2" SP CFM

4330 6111 9616

BHP

6.69

9.84

12.88

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP CFM

7777 10668 12669

BHP

5.44

8.51

11.46

-

-

-

-

-

10

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

024

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

24 in.

Maximum RPM

3450

Tip Speed (FPM)

6.28 x RPM

Bare Fan Weight

250 lbs.

Inlet/Outlet Diameter (Area)

24.25 in. (3.21 sq. ft.)

RPM

870 1150 1750 3450

RPM

1750 3450

Pitch

12 18 24 30 12 18 12 18 24 30 12 18 24 30 12 18 24 30 12 18 24

Pitch 0" SP CFM

874 4832 5690 6756 5120 6387 7521 8931 7792 9719 11445 13590 15361 19160 22563

BHP

0.16

0.24

0.33

0.56

0.37

0.56

0.76

1.29

1.31

1.97

2.68

4.54

10.04

15.11

20.52

2 1/2" SP CFM

2757 6715 8316 14174 17785

BHP

2.33

4.12

5.50

12.73

18.53

1/4" SP CFM

3373 4248 5013 6055 4768 5980 7015 8434 7570 9472 11104 13274 15251 19041 22386

BHP

0.23

0.32

0.41

0.62

0.46

0.67

0.88

1.38

1.44

2.15

2.89

4.67

10.27

15.47

20.95

3" SP CFM

13908 17468

BHP

13.31

19.15

1/2" SP CFM

2465 3441 4060 3189 4341 5484 6481 7836 7333 9194 10779 12943 15140 18917 22211

BHP

0.26

0.39

0.49

0.52

0.55

0.77

0.98

1.46

1.58

2.32

3.06

4.80

10.51

15.83

21.38

3 1/2" SP CFM

13629 17139

BHP

13.88

19.74

3/4" SP CFM

3746 4910 5793 6973 7078 8888 10449 12590 15026 18789 22040

BHP

0.61

0.86

1.08

1.52

1.72

2.49

3.22

4.94

10.77

16.18

21.79

4" SP CFM

13335 16800

BHP

14.43

20.32

1" SP CFM

4862 5866 6799 8561 10100 12199 14911 18657 21872

BHP

1.17

1.56

1.87

2.64

3.36

5.07

11.03

16.53

22.17

4 1/2" SP CFM

13022 16542

BHP

14.94

20.88

1 1/4" SP CFM

6485 8216 9717 11750 14794 18522 21706

BHP

1.99

2.78

3.51

5.18

11.30

16.88

22.53

5" SP CFM

12688 16094

BHP

15.39

21.42

1 1/2" SP CFM

6122 7850 9284 11215 14674 18382 21541

BHP

2.09

2.91

3.65

5.28

11.58

17.22

22.88

5 1/2" SP CFM

12326 15726

BHP

15.78

21.95

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP CFM

5037 6973 8222 9857 14429 18091 21212

BHP

2.12

3.16

3.96

5.41

12.15

17.88

23.54

6" SP CFM

11929 15343

BHP

16.09

22.47

11

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

030

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

30 in.

Maximum RPM

1750

Tip Speed (FPM)

7.85 x RPM

Bare Fan Weight

350 lbs.

Inlet/Outlet Diameter (Area)

30.31 in. (5.01 sq. ft.)

RPM

1150 1750 3450

RPM

1750

Pitch

12 18 24 30 12 18 24 30 12 18 24 30 12 18 24 30

Pitch 0" SP CFM

7566 9437 11113 13196 10001 12474 14689 17443 15219 18982 22354 26543

2 1/2" SP BHP

0.49

0.74

1.00

1.70

1.13

1.71

2.32

3.93

4.00

6.02

8.17

13.84

CFM

11632 15030 17762 21428

BHP

6.45

9.04

11.34

16.22

1/4" SP CFM

6977 8755 10279 12368 9572 11989 14050 16834 14944 18680 21922 26153

3" SP BHP

0.62

0.91

1.18

1.83

1.30

1.94

2.58

4.10

4.24

6.37

8.60

14.09

CFM

10301 13943 16427 19708

BHP

6.51

9.54

11.94

16.46

1/2" SP CFM

6238 7915 9364 11323 9097 11422 13426 16175 14659 18353 21508 25747

3 1/2" SP BHP

0.75

1.05

1.32

1.95

1.49

2.15

2.78

4.27

4.50

6.72

8.97

14.36

CFM

7490 12142 14868 17876

BHP

6.50

9.92

12.47

16.69

-

-

3/4" SP CFM

5061 6889 8116 9735 8553 10793 12750 15411 14361 18002 21103 25332

BHP

0.80

1.18

1.47

2.02

1.67

2.34

2.97

4.44

4.78

7.05

9.31

14.62

-

-

-

-

1" SP CFM

7894 10110 11959 14448 14049 17628 20694 24900

BHP

1.80

2.51

3.16

4.57

5.07

7.37

9.62

14.89

-

-

-

-

1 1/4" SP CFM

6989 9328 10992 13201 13720 17235 20276 24443 -

BHP

1.85

2.68

3.35

4.66

5.35

7.68

9.91

15.15

-

-

-

-

-

1 1/2" SP CFM

5069 8096 9829 11811 13370 16825 19839 23954 -

BHP

1.83

2.81

3.53

4.73

5.63

7.97

10.20

15.40

-

-

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

-

-

2" SP CFM

12588 15963 18883 22833 -

BHP

6.12

8.52

10.76

15.86

-

-

12

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

036

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

36 in.

Maximum RPM

1750

Tip Speed (FPM)

9.42 x RPM

Bare Fan Weight

600 lbs.

Inlet/Outlet Diameter (Area)

36.375 in. (7.21 sq. ft.)

RPM

870 1150 1750

Pitch

12 18 24 30 12 18 24 30 12 18 24 30

0" SP CFM

12759 15450 19405 21648 16865 20422 25650 28615 25664 31077 39033 43544

2 1/2" SP BHP

1.04

1.39

2.53

3.47

2.40

3.20

5.84

8.02

8.47

11.29

20.57

28.26

1/4" SP CFM

11926 14565 18334 20558 16245 19771 24848 27795 25262 30658 38507 42990

3" SP BHP

1.32

1.81

2.60

3.67

2.77

3.82

5.86

8.18

8.98

12.44

20.56

28.29

1/2" SP CFM

11001 13557 17204 19510 15597 19071 24024 27017 24852 30226 37980 42460

3 1/2" SP BHP

1.59

2.11

2.87

4.06

3.15

4.29

6.07

8.59

9.58

13.23

20.59

28.66

3/4" SP CFM

9868 12377 15976 18160 14906 18316 23173 26213 24434 29780 37445 41946

4" SP BHP

1.82

2.34

3.22

4.45

3.50

4.70

6.43

9.11

10.16

13.98

20.78

29.19

1" SP CFM

8101 10884 14509 16252 14148 17496 22289 25327 24008 29320 36904 41436

4 1/2" SP BHP

1.97

2.51

3.50

4.65

3.84

5.05

6.86

9.65

10.74

14.69

21.12

29.83

1 1/4" SP CFM

13279 16594 21354 24288 23572 28844 36335 40923

BHP

4.14

5.34

7.32

10.17

11.30

15.36

21.55

30.55

1 1/2" SP CFM

12210 15578 20337 23007 23123 28353 35798 40400 -

BHP

4.39

5.59

7.75

10.55

11.84

15.99

22.08

31.32

-

2" SP CFM

8108 12731 17585 19879 22174 27318 34659 39297 -

BHP

4.47

5.92

8.25

10.81

12.89

17.13

23.33

32.97

-

RPM

1750

Pitch

12 18 24 30

CFM

21131 26203 33475 38069

BHP

13.87

18.13

24.71

34.62

CFM

19940 24986 32225 36637

BHP

14.76

19.00

26.09

36.12

CFM

18494 23629 30872 34910

BHP

15.52

19.73

27.37

37.24

CFM

16524 22055 29340 32885

BHP

16.02

20.34

28.41

37.79

CFM

13316 20050 27415 30786

BHP

15.89

20.78

29.03

38.02

-

-

-

-

-

-

-

-

-

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

-

13

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

042

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

42 in.

Maximum RPM

1750

Tip Speed (FPM)

11.0 x RPM

Bare Fan Weight

800 lbs.

Inlet/Outlet Diameter (Area)

42.44 in. (9.82 sq. ft.)

RPM

695 870 1150 1750

RPM

1150 1750

Pitch

12 18 24 30 12 18 12 18 24 30 12 18 24 30 12 18 24 30 12 18 24

Pitch 0" SP CFM

16185 19599 24616 27461 20260 24534 30814 34376 26781 32429 40732 45439 40753 49349 61983

BHP

1.15

1.53

2.79

3.83

2.25

3.00

5.46

7.50

5.20

6.93

12.62

17.33

18.31

24.41

44.46

2 1/2" SP CFM

15763 22038 29678 33197 35717 43928

BHP

9.86

12.63

17.66

23.26

27.14

36.17

1/4" SP CFM

14960 18294 23046 25919 19298 23519 29572 33125 26062 31677 39797 44471 40287 48862 61207

BHP

1.50

2.05

2.90

4.10

2.70

3.71

5.52

7.75

5.77

7.97

12.61

17.50

19.06

26.40

44.41

3" SP CFM

34557 42668

BHP

28.75

37.69

1/2" SP CFM

13559 16772 21370 24285 18274 22405 28285 31916 25320 30884 38848 43557 39811 48366 60521

BHP

1.83

2.41

3.28

4.61

3.14

4.24

5.85

8.31

6.38

8.75

12.82

18.06

20.02

27.87

44.46

3 1/2" SP CFM

33302 41333

BHP

30.27

39.14

3/4" SP CFM

11676 14913 19481 22031 17138 21171 26937 30594 24549 30047 37877 42648 39329 47858 59891

BHP

2.10

2.67

3.70

5.04

3.55

4.68

6.36

8.96

6.96

9.46

13.25

18.78

20.96

29.21

44.71

4" SP CFM

31912 39908

BHP

31.69

40.59

1" SP CFM

7664 12122 16782 19010 15797 19780 25496 28990 23740 29161 36882 41706 38841 47337 59291

BHP

2.13

2.82

3.94

5.16

3.91

5.03

6.91

9.57

7.53

10.10

13.83

19.61

21.89

30.45

45.11

4 1/2" SP CFM

30324 38371

BHP

32.96

42.07

1 1/4" SP CFM

14002 18144 23873 26892 22874 28221 35859 40698 38347 46804 58708

BHP

4.19

5.31

7.40

9.97

8.06

10.67

14.52

20.48

22.81

31.59

45.63

5" SP CFM

28414 36684

BHP

34.01

43.54

1 1/2" SP CFM

10761 15981 21789 24437 21930 27217 34800 39582 37843 46257 58132

BHP

4.23

5.51

7.70

10.09

8.57

11.18

15.24

21.34

23.71

32.64

46.23

5 1/2" SP CFM

25919 34777

BHP

34.68

44.89

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP CFM

19622 24947 32502 36808 36806 45122 56975

BHP

9.44

12.02

16.64

22.73

25.46

34.52

47.69

6" SP CFM

22260 32497

BHP

34.54

45.72

14

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

048

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

48 in.

Maximum RPM

1750

Tip Speed (FPM)

12.57 x RPM

Bare Fan Weight

1000 lbs.

Inlet/Outlet Diameter (Area)

48.50 in. (12.83 sq. ft.)

RPM

695 870 1150 1750

RPM

1150 1750

Pitch

12 18 24 30 12 18 12 18 24 30 12 18 24 30 12 18 24 30 12 18

Pitch 0" SP CFM

24159 29255 36745 40991 30243 36622 45997 51313 39976 48408 60801 67827 60833 73664

BHP

2.24

2.98

5.43

7.46

4.39

5.85

10.65

14.63

10.13

13.50

24.60

33.79

35.69

47.59

2 1/2" SP CFM

29971 37869 49141 55753 55212 67652

BHP

18.15

23.19

32.01

43.96

49.05

66.70

1/4" SP CFM

22776 27790 34962 39215 29150 35475 44583 49867 39158 47553 59733 66711 60303 73108

BHP

2.77

3.80

5.53

7.80

5.04

6.96

10.68

14.91

10.96

15.16

24.67

33.94

36.71

50.77

3" SP CFM

26406 34842 46173 51830 53987 66308

BHP

19.09

24.20

33.77

45.12

51.60

69.25

1/2" SP CFM

21270 26148 33097 37455 28009 34244 43132 48496 38318 46664 58657 65652 59760 72546

BHP

3.29

4.40

6.01

8.51

5.72

7.80

11.05

15.65

11.88

16.37

24.74

34.64

38.15

53.02

3 1/2" SP CFM

20041 30777 42265 47578 52707 64908

BHP

18.93

24.89

34.75

45.50

54.06

71.61

3/4" SP CFM

19520 24279 31109 35392 26796 32917 41635 47083 37459 45737 57562 64617 59213 71973

BHP

3.75

4.87

6.65

9.28

6.36

8.53

11.69

16.56

12.78

17.49

25.20

35.60

39.58

55.13

4" SP CFM

51358 63449

BHP

56.43

73.84

1" SP CFM

17201 22061 28883 32624 25469 31480 40080 45533 36572 44771 56448 63575 58662 71390

BHP

4.12

5.23

7.26

9.86

6.96

9.17

12.47

17.55

13.65

18.53

25.89

36.72

40.98

57.11

4 1/2" SP CFM

49924 -

BHP

58.71

-

1 1/4" SP CFM

12839 19060 25986 29143 23957 29903 38441 43729 35649 43762 55313 62502 58105 70796

BHP

4.21

5.48

7.66

10.03

7.51

9.70

13.29

18.48

14.49

19.49

26.76

37.95

42.37

58.97

5" SP CFM

48376 -

BHP

60.86

-

1 1/2" SP CFM

22118 28135 36666 41517 34681 42707 54154 61377 57542 70191

BHP

7.98

10.16

14.06

19.20

15.30

20.37

27.75

39.24

43.75

60.71

5 1/2" SP CFM

46679 -

BHP

62.87

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP CFM

15225 23326 32016 36028 32548 40431 51743 58861 56394 68945

BHP

8.20

10.77

15.05

19.70

16.82

21.91

29.90

41.80

46.44

63.88

6" SP CFM

44774 -

BHP

64.68

15

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

054

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

54 in.

Maximum RPM

1150

Tip Speed (FPM)

14.14 x RPM

Bare Fan Weight

1700 lbs.

Inlet/Outlet Diameter (Area)

54.56 in. (16.24 sq. ft.)

RPM

695 870 1150

Pitch

12 18 24 30 12 18 24 30 12 18 24 30

0" SP CFM

34399 41654 52318 58365 43061 52143 65492 73061 56919 68924 86570 96574

2 1/2" SP BHP

4.03

5.37

9.78

13.44

7.90

10.54

19.19

26.36

18.25

24.34

44.33

60.89

1/4" SP CFM

32853 40026 50321 56347 41837 50862 63904 71419 56002 67967 85368 95310

3" SP BHP

4.78

6.58

9.86

13.83

8.82

12.20

19.31

26.66

19.39

26.85

44.31

60.97

1/2" SP CFM

31214 38246 48256 54408 40572 49508 62287 69868 55064 66979 84164 94103

3 1/2" SP BHP

5.54

7.50

10.41

14.76

9.80

13.44

19.56

27.58

20.71

28.60

44.39

61.82

3/4" SP CFM

29417 36288 46101 52317 39255 48074 60631 68319 54109 65959 82943 92930

4" SP BHP

6.24

8.26

11.24

15.86

10.74

14.56

20.29

28.78

22.01

30.26

44.84

63.02

1" SP CFM

27338 34102 43816 49845 37862 46552 58932 66701 53135 64905 81706 91766

4 1/2" SP BHP

6.87

8.89

12.17

16.94

11.64

15.57

21.27

30.13

23.28

31.82

45.59

64.45

1 1/4" SP CFM

24690 31585 41294 46678 36361 44927 57179 64947 52135 63816 80451 90593

BHP

7.40

9.40

13.04

17.73

12.49

16.46

22.39

31.53

24.52

33.30

46.59

66.06

1 1/2" SP CFM

20472 28447 38255 42790 34702 43182 55354 62075 51105 62688 79178 89394

BHP

7.65

9.78

13.68

18.03

13.28

17.25

23.57

32.88

25.73

34.68

47.79

67.80

2" SP CFM

30484 39171 51333 57951 48921 60309 76568 86855

BHP

14.60

18.53

25.74

34.88

28.04

37.19

50.60

71.46

RPM

870 1150

Pitch

12 18 24 30 12 18 24 30

CFM

22398 33676 46031 51684 46504 57736 73848 84001

BHP

14.83

19.38

27.09

35.47

30.19

39.36

53.68

75.11

CFM

43713 54914 70965 80637

BHP

32.13

41.24

56.73

78.33

CFM

40251 51740 67817 76553

BHP

33.73

42.82

59.48

80.59

CFM

35310 47992 64184 71838

BHP

34.63

44.09

61.63

81.58

CFM

27365 42968 59349 67093

BHP

33.96

44.92

62.66

82.08

-

-

-

-

-

-

-

-

-

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

-

16

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

060

| DIRECT DRIVE PERFORMANCE DATA

Wheel Diameter

60 in.

Maximum RPM

1150

Tip Speed (FPM)

15.71 x RPM

Bare Fan Weight

2000 lbs.

Inlet/Outlet Diameter (Area)

60.63 in. (20.05 sq. ft.)

RPM

695 870 1150

RPM

870 1150

Pitch

12 18 24 30 12 18 24 30 12 18 24

Pitch

12 18 24 30 12 18 24

0" SP CFM

47186 57139 71767 80061 59068 71526 89838 100220 78078 94546 118751

2 1/2" SP BHP

6.82

9.10

16.57

22.76

13.38

17.84

32.50

44.65

30.91

41.21

75.07

CFM

41450 53422 70111 79087 66950 82559 104849

BHP

24.81

31.48

43.76

59.18

47.67

63.17

85.95

1/4" SP CFM

45477 55345 69554 77799 57713 70111 88075 98382 77063 93486 117414

3" SP BHP

7.85

10.83

16.62

23.20

14.62

20.23

32.47

44.93

32.40

44.89

75.06

CFM

32917 47503 64400 72095 64281 79711 101834

BHP

25.30

32.68

45.71

59.99

50.63

66.18

90.17

1/2" SP CFM

43691 53417 67284 75653 56321 68631 86291 96644 76024 92398 116082

3 1/2" SP BHP

8.91

12.14

17.19

24.35

15.98

21.99

32.80

46.05

34.23

47.33

75.04

CFM

61301 76649 98682

BHP

53.38

68.84

94.41

3/4" SP CFM

41792 51341 64941 73442 54888 67081 84472 94933 74973 91282 114735

4" SP BHP

9.90

13.28

18.19

25.78

17.30

23.61

33.59

47.54

36.03

49.66

75.43

CFM

57839 73311 95330

BHP

55.80

71.18

98.41

1" SP CFM

39712 49090 62507 71014 53400 65456 82617 93195 73906 90136 113372

4 1/2" SP BHP

10.84

14.27

19.41

27.32

18.57

25.09

34.73

49.27

37.80

51.89

76.20

CFM

53544 69586 -

BHP

57.73

73.19

-

1 1/4" SP CFM

37342 46620 59940 68184 51838 63749 80721 91381 72820 88960 111994

5" SP BHP

11.69

15.11

20.70

28.76

19.79

26.45

36.11

51.14

39.53

54.02

77.28

CFM

47547 65251 -

BHP

58.67

74.85

-

1 1/2" SP CFM

34453 43847 57159 64711 50178 61950 78777 89443 71710 87751 110600

5 1/2" SP BHP

12.42

15.81

21.90

29.89

20.96

27.68

37.65

53.07

41.23

56.05

78.64

CFM

38552 59702 -

BHP

57.67

76.00

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP CFM

23573 36272 49834 56115 46402 58013 74682 84939 69406 85231 107763

6" SP BHP

12.75

16.77

23.41

30.65

23.10

29.80

40.86

56.70

44.53

59.80

82.01

CFM

31396 -

BHP

57.11

17

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

012

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

12 in.

Maximum RPM

5490

Tip Speed (FPM)

3.14 x RPM

Bare Fan Weight

120 lbs.

Inlet/Outlet Diameter (Area)

12.19 in. (0.81 sq. ft.)

CFM

972 1134 1296 1458 1620 1782 1944 2106 2268 2430 2592 2754 2916 3078 3240 3402 3564 3725

CFM

1296 1458 1620 1782 1944 2106 2268 2430 2592 2754 2916 3078 3240 3402

RPM

3515 3556 3655 3793 3954 4126 4310 4497 4689 4885 5084 5285 5490

0" SP

3524 3758 3993 4228 4463 4698 4933 5168 5403

RPM

1409 1644 1879 2114 2349 2584 2819 3054 3289

2" SP

1.05

1.28

1.53

1.82

2.14

2.50

2.89

3.33

3.80

BHP

0.07

0.11

0.16

0.23

0.31

0.42

0.54

0.69

0.86

BHP

1.16

1.24

1.36

1.53

1.72

1.94

2.19

2.46

2.76

3.09

3.46

3.85

4.29

RPM

3964 4053 4181 4333 4499 4676 4861 5049 5240 5438 3612 3841 4071 4302 4531 4762 4994 5226 5459

RPM

1656 1854 2061 2273 2489 2710 2933 3158 3384

1/4" SP 2 1/2" SP

1.15

1.38

1.64

1.94

2.26

2.62

3.02

3.46

3.94

BHP

0.12

0.17

0.22

0.30

0.39

0.49

0.62

0.77

0.95

BHP

1.71

1.85

2.05

2.27

2.53

2.82

3.13

3.48

3.86

4.27

-

RPM

4304 4340 4424 4545 4694 4856 5028 5209 5393 3709 3930 4153 4379 4604 4832 5059 5287 -

RPM

1897 2063 2248 2442 2642 2848 3059 3273 3489

1/2" SP

1.27

1.50

1.77

2.07

2.40

2.77

3.17

3.61

-

BHP

0.19

0.24

0.31

0.39

0.48

0.59

0.73

0.88

1.06

3" SP BHP

2.12

2.24

2.41

2.63

2.89

3.19

3.51

3.88

4.27

-

RPM

4652 4690 4775 4893 5039 5197 5367 3811 4025 4242 4460 4682 4904 5128 5353 -

RPM

2170 2272 2428 2605 2792 2987 3186 3391 3598

3/4" SP 3 1/2" SP

1.40

1.64

1.91

2.21

2.55

2.92

3.33

3.78

-

BHP

0.28

0.33

0.40

0.48

0.59

0.71

0.85

1.01

1.19

BHP

2.69

2.83

3.03

3.28

3.58

3.91

4.28

3913 4121 4332 4545 4761 4978 5199 5419 -

RPM

2510 2614 2764 2936 3119 3311 3507 3708

RPM

4978 5020 5107 5228 5371 -

1" SP 4" SP BHP

3.31

3.47

3.70

4.00

4.34

1.55

1.79

2.07

2.37

2.71

3.09

3.50

3.95

-

BHP

0.43

0.50

0.59

0.70

0.83

0.97

1.14

1.33

RPM

5286 5334 5426 -

1 1/4" SP

4016 4217 4423 4630 4841 5055 5269 5488 -

RPM

2819 2930 3081 3250 3433 3621 3817

4 1/2" SP

1.70

1.95

2.23

2.54

2.90

3.27

3.68

4.14

-

BHP

0.62

0.70

0.82

0.95

1.10

1.28

1.48

BHP

3.98

4.18

4.45

-

-

-

1 1/2" SP

3921 4114 4312 4512 4716 4922 5131 5344 -

RPM

3048 3109 3228 3382 3553 3733 1.63

1.86

2.12

2.40

2.72

3.07

3.45

3.88

-

BHP

0.76

0.83

0.94

1.08

1.24

1.42

-

-

-

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

18

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

015

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

15 in.

Maximum RPM

4935

Tip Speed (FPM)

3.93 x RPM

Bare Fan Weight

150 lbs.

Inlet/Outlet Diameter (Area)

15.19 in. (1.26 sq. ft.)

CFM

4522 4773 5024 5275 5526 5777 6028 6279 1510 1761 2012 2263 2514 2765 3016 3267 3518 3769 4020 4271

CFM

2514 2765 3016 3267 3518 3769 4020 4271 4522 4773 5024 5275 5526 5777 6028 6279

RPM

3124 3174 3267 3378 3499 3625 3756 3893 4031 4177 4323 4473 4623 4779 4935

0" SP RPM

1062 1238 1414 1591 1767 1944 2120 2297 2473 2650 2826 3003 3179 3356 3532 3708 1.02

1.24

1.48

1.76

2.07

2.41

2.79

3885 4061 4238 3.21

3.67

4.17

4414 4.71

2 1/2" SP BHP

0.07

0.10

0.16

0.22

0.30

0.40

0.52

0.66

0.83

BHP

2.12

2.25

2.45

2.70

2.98

3.29

3.62

3.99

4.39

4.84

5.31

5.83

6.38

6.99

7.64

RPM

3421 3466 3566 3662 3779 3903 4031 4165 4303 4444 4588 4734 -

1/4" SP RPM

1275 1423 1577 1736 1899 2064 2231 2400 2570 2739 2910 3083 3254 3428 3600 3774 1.19

1.42

1.68

1.97

2.29

2.64

3.04

3947 4121 4294 3.46

3.94

4.44

4470

3" SP

5.00

BHP

0.14

0.19

0.25

0.32

0.42

0.53

0.66

0.81

0.99

BHP

2.78

2.92

3.16

3.45

3.77

4.12

4.50

4.92

5.38

5.87

6.40

6.97

-

RPM

3696 3739 3827 3933 4048 4170 4297 4428 4564 4702 -

1/2" SP RPM

1482 1602 1735 1877 2026 2180 2337 2499 2661 2825 2991 3159 3327 3497 3666 3836 1.36

1.60

1.87

2.17

2.51

2.87

3.28

4007 4178 4351 3.72

4.20

4.72

4522 5.29

3 1/2" SP BHP

0.23

0.28

0.35

0.44

0.54

0.66

0.80

0.96

1.15

BHP

3.50

3.67

3.94

4.27

4.64

5.04

5.47

5.94

6.45

7.00

-

RPM

3954 4001 4087 4193 4305 4426 4552 4683 -

3/4" SP RPM

1711 1778 1890 2017 2152 2295 2443 2596 2752 2911 3072 3234 3399 3564 3730 3898 1.54

1.79

2.07

2.38

2.72

3.10

3.51

4068 4236 4405 3.97

4.46

4.99

4574

4" SP

5.57

BHP

0.35

0.40

0.47

0.56

0.67

0.80

0.95

1.12

1.32

BHP

4.29

4.49

4.80

5.18

5.58

6.03

6.52

7.05

-

RPM

4194 4249 4340 4444 4557 4676 -

1" SP RPM

1977 2044 2155 2278 2409 2549 2693 2842 2995 3151 3309 3469 3632 3795 3960 1.72

1.98

2.27

2.59

2.95

3.33

3.76

4125 4291 4460 4.22

4.74

5.27

4628 5.86

4 1/2" SP BHP

0.54

0.60

0.70

0.82

0.95

1.11

1.29

1.49

BHP

5.14

5.38

5.75

6.17

6.62

7.12

-

RPM

4428 4490 4581 4685

1 1/4" SP RPM

2215 2291 2400 2523 2654 2791 2934 3080 3231 3385 3541 3698 3858 4020 1.92

2.18

2.48

2.81

3.17

3.57

4.00

4183 4348 4513 4.47

4.99

5.55

4678

5" SP

6.14

BHP

0.76

0.85

0.97

1.11

1.28

1.47

1.68

-

BHP

6.06

6.36

6.76

7.22

-

RPM

4643 4653 -

1 1/2" SP RPM

2437 2524 2635 2758 2888 3024 3165 3310 3459 3610 3765 3923 4082 2.12

2.39

2.70

3.03

3.40

3.81

4.26

4241 4402 4567 4.74

5.26

5.83

4730 6.43

5 1/2" SP BHP

1.01

1.13

1.28

1.45

1.65

1.87

-

BHP

6.91

7.04

-

-

-

-

-

BHP

1.52

1.65

1.83

2.04

2.27

2.53

2.83

3.15

3.50

3.88

4.31

4.77

5.27

5.81

6.40

7.02

RPM

2796 2862 2962 3078 3201 3332 3468 3607 3753 3898 4049 4202 4357 4513 4673 4832

2" SP -

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

19

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

018

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

18 in.

Maximum RPM

4483

Tip Speed (FPM)

4.71 x RPM

Bare Fan Weight

200 lbs.

Inlet/Outlet Diameter (Area)

18.19 in. (1.80 sq. ft.)

CFM

4320 4680 5040 5400 5760 6120 6480 6840 7200 7560 7920 8280 8640 9000 6480 6840 7200 7560 7920 8280 8640 9000 2160 2520 2880 3240 3600 3960 4320 4680 5040 5400 5760 6120

CFM RPM

3023 3061 3127 3205 3293 3387 3488 3593 3701 3814 3930 4049 4170

0" SP RPM

871 1016 1161 1307 1452 1597 1742 1887 2033 2178 2323 2468 2613 2758 2904 3049 1.24

1.50

1.80

2.14

2.51

2.93

3.39

3194 3339 3484 3.90

4.46

5.06

3630

3" SP

5.72

BHP

0.08

0.13

0.19

0.27

0.37

0.49

0.63

0.80

1.01

BHP

4.27

4.50

4.83

5.21

5.63

6.10

6.62

7.17

7.78

8.44

9.15

9.90

10.72

RPM

3264 3299 3362 3439 3525 3616 3714 3817 3923 4033 4147 4262

1/4" SP RPM

1062 1177 1301 1431 1564 1699 1836 1974 2113 2254 2395 2535 2677 2819 2961 3104 1.48

1.76

2.07

2.42

2.82

3.25

3.73

3246 3390 3533 4.25

4.83

5.45

3676 6.12

3 1/2" SP BHP

0.18

0.24

0.32

0.41

0.53

0.66

0.82

1.01

1.23

BHP

5.37

5.63

6.00

6.43

6.91

7.43

8.01

8.64

9.31

10.04

10.81

11.64

RPM

3491 3525 3587 3663 3747 3838 3933 4033 4138 4246 4357

1/2" SP RPM

1267 1350 1449 1559 1677 1801 1929 2059 2192 2327 2464 2601 2738 2877 3017 3157 1.71

2.01

2.34

2.71

3.12

3.57

4.06

3298 3438 3580 4.60

5.19

5.83

3721

4" SP

6.52

BHP

0.32

0.39

0.47

0.58

0.70

0.85

1.02

1.22

1.45

BHP

6.57

6.87

7.28

7.77

8.31

8.90

9.54

10.22

10.96

11.76

12.61

RPM

3705 3741 3802 3878 3961 4051 4144 4243 4347 4454

3/4" SP RPM

1530 1603 1693 1796 1907 2024 2147 2272 2402 2533 2665 2800 2936 3072 3209 1.97

2.27

2.62

3.00

3.42

3.89

4.39

3348 3487 3626 4.95

5.55

6.21

3766 6.92

4 1/2" SP BHP

0.56

0.65

0.76

0.90

1.05

1.24

1.45

1.69

BHP

7.87

8.21

8.67

9.22

9.82

10.48

11.17

11.93

12.75

13.62

RPM

3907 3947 4011 4084 4168 4257 4350 4448 -

1" SP RPM

1763 1831 1919 2016 2123 2236 2354 2477 2603 2732 2862 2994 3128 3262 2.23

2.55

2.91

3.30

3.74

4.21

4.73

3399 3535 3672 5.31

5.92

6.59

3810

5" SP

7.31

BHP

0.86

0.97

1.11

1.28

1.47

1.69

1.94

BHP

9.25

9.64

10.18

10.77

11.45

12.16

12.93

13.76

-

RPM

4103 4147 4210 4286 4369 4457 -

1 1/4" SP RPM

1973 2042 2128 2224 2328 2439 2555 2675 2799 2924 3053 3183 3315 2.51

2.83

3.20

3.61

4.06

4.54

5.08

3449 3583 3719 5.67

6.30

6.98

3854 7.72

5 1/2" SP BHP

1.21

1.35

1.52

1.72

1.95

2.21

BHP

10.74

11.19

11.78

12.45

13.18

13.97

-

RPM

4278 4921 4342 4406 4483 -

1 1/2" SP RPM

2139 2171 2241 2327 2423 2525 2634 2748 2867 2988 3113 3240 3369 2.80

3.14

3.51

3.93

4.39

4.89

5.44

3499 3631 3765 6.03

6.68

7.38

3898

6" SP

8.12

BHP

1.50

1.61

1.78

1.99

2.23

2.49

BHP

12.00

12.31

12.86

13.50

14.24

-

RPM

4449 4476 -

2" SP RPM

2478 2535 2612 2700 2795 2898 3005 3118 3235 3354 3477 3.42

3.78

4.17

4.60

5.09

5.60

6.18

3602 3728 3858 6.79

7.46

8.19

3988 8.96

6 1/2" SP BHP

2.37

2.57

2.82

3.10

BHP

13.58

14.01

-

-

-

BHP

3.27

3.48

3.77

4.10

4.47

4.88

5.33

5.82

6.37

6.95

7.59

8.28

9.02

9.82

2 1/2" SP RPM

2763 2807 2878 2960 3051 3149 3252 3359 3474 3588 3706 3828 3952 4078

-

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

20

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

021

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

21 in.

Maximum RPM

3574

Tip Speed (FPM)

5.50 x RPM

CFM

8820 9310 9800 10290 10780 11270 11760 12250 2940 3430 3920 4410 4900 5390 5880 6370 6860 7350 7840 8330

RPM

747 871 996 1120 1245 1369 1494 1618 1743 1867 1992 2116 2240 2365 2489 2614 2738 2863 2987 3112

0" SP BHP

0.11

0.17

0.26

0.36

0.50

0.66

0.86

1.10

1.37

1.68

2.04

2.45

2.91

3.42

3.99

4.62

5.31

6.07

6.90

7.80

1/4" SP RPM

910 1009 1116 1227 1341 1457 1574 1693 1812 1932 2053 2173 2295 2416 2539 2661 2.01

2.39

2.82

3.30

3.83

4.43

5.08

2783 2906 3029 5.79

6.57

7.42

3151 8.34

2 1/2" SP BHP

0.25

0.33

0.43

0.56

0.72

0.90

1.12

1.38

1.67

1/2" SP RPM

1087 1157 1242 1337 1438 1544 1654 1766 1880 1995 2112 2230 2348 2467 2586 2706 2827 2948 3069 3190

BHP

0.44

0.53

0.64

0.78

0.95

1.16

1.39

1.67

1.98

2.34

2.74

3.19

3.69

4.24

4.85

5.53

6.26

7.07

7.93

8.88

3" SP 3/4" SP RPM

1312 1374 1452 1539 1635 1736 1840 1948 2059 2171 2285 2401 2517 2634 2752 2.68

3.10

3.56

4.08

4.66

5.29

5.99

2870 2989 3109 6.74

7.56

8.45

3228 9.42

3 1/2" SP BHP

0.77

0.89

1.04

1.22

1.43

1.69

1.97

2.30

RPM

1511 1570 1645 1728 1820 1917 2018 2124 2231 2342 2454 2567 2681 2797 2913 3030 3148 3266

1" SP 2" SP RPM

2368 2406 2467 2537 2616 2699 2788 2880 2976 3076 3178 3282 3388 3496

BHP

4.45

4.74

5.13

5.58

6.08

6.64

7.26

7.93

8.67

9.47

10.33

11.27

12.28

13.38

RPM

2591 2624 2680 2747 2823 2904 2990 3079 3173 3269 3369 3471 3574

BHP

5.81

6.13

6.57

7.08

7.67

8.30

9.00

9.76

10.58

11.48

12.44

13.49

14.59

RPM

2799 2829 2883 2948 3021 3100 3183 3271 3362 3457 3554 -

BHP

7.31

7.67

8.17

8.75

9.41

10.12

10.90

11.75

12.66

13.65

14.72

-

RPM

2992 3022 3076 3139 3211 3289 3371 3457 -

4" SP BHP

8.94

9.35

9.92

10.57

11.31

12.11

12.97

13.91

-

BHP

1.17

1.32

1.51

1.74

2.00

2.30

2.65

3.03

3.47

3.95

4.49

5.08

5.73

6.44

7.22

8.06

8.97

9.96

Bare Fan Weight

250 lbs.

RPM

3175 3207 3260 3324 3395 3471 -

1 1/4" SP RPM

1692 1751 1824 1907 1996 2091 2190 2293 2399 2507 2617 2729 2842 3.41

3.86

4.36

4.91

5.52

6.19

6.92

2957 3071 3188 7.71

8.57

9.51

3304 10.51

4 1/2" SP BHP

1.64

1.83

2.07

2.34

2.66

3.01

BHP

10.70

11.17

11.81

12.55

13.36

14.25

-

Inlet/Outlet Diameter (Area)

21.22 in. (2.45 sq. ft.) -

RPM

3349 3384 3438 3501

1 1/2" SP RPM

1833 1860 1921 1994 2076 2164 2258 2356 2457 2562 2668 2777 2888 3000 3113 3227 3342

BHP

2.04

2.19

2.42

2.70

3.03

3.39

3.81

4.27

4.78

5.35

5.97

6.66

7.40

8.21

9.09

10.04

11.07

5" SP

-

BHP

12.59

13.14

13.85

14.66

21

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

024

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

24 in.

Maximum RPM

2963

Tip Speed (FPM)

6.28 x RPM

Bare Fan Weight

350 lbs.

Inlet/Outlet Diameter (Area)

24.25 in. (3.21 sq. ft.) 3852 4494 5136 5778 6420 7062 7704 8346 8988 9630 10272 10914 11556 12198 12840 13482 14124 14766 15408 16050

CFM 0" SP RPM

603 704 804 905 1005 1106 1207 1307 1408 1508 1609 1709 1810 1910 2011 2112 1.81

2.19

2.63

3.12

3.68

4.29

4.96

2212 2313 2413 5.71

6.52

7.41

2514 8.37

2 1/2" SP BHP

0.12

0.18

0.27

0.39

0.54

0.71

0.93

1.18

1.47

1/4" SP RPM

737 819 906 996 1088 1182 1277 1373 1469 1566 1663 1761 1859 1957 2055 2154 2.19

2.60

3.06

3.58

4.16

4.79

5.49

2252 2352 2451 6.25

7.10

8.01

2550

3" SP

9.00

BHP

0.28

0.37

0.49

0.63

0.80

1.00

1.23

1.51

1.83

1/2" SP RPM

867 932 1005 1083 1166 1253 1342 1433 1525 1619 1713 1809 1904 2000 2097 2194 2.58

3.02

3.51

4.05

4.65

5.31

6.03

2291 2389 2486 6.82

7.69

8.63

2584 9.63

3 1/2" SP BHP

0.50

0.60

0.73

0.89

1.08

1.30

1.56

1.86

2.20

3/4" SP RPM

990 1041 1103 1171 1246 1325 1408 1493 1581 1671 1762 1855 1948 2042 2137 2232 2.99

3.45

3.96

4.53

5.14

5.83

6.58

2328 2424 2520 7.39

8.28

9.25

2617 10.28

4" SP BHP

0.75

0.87

1.01

1.18

1.39

1.63

1.91

2.22

2.59

1" SP RPM

1146 1197 1258 1325 1397 1473 1554 1637 1723 1811 1901 1991 2084 2176 2269 3.42

3.90

4.43

5.01

5.66

6.37

7.13

2364 2458 2553 7.98

8.88

9.87

2649 10.93

4 1/2" SP BHP

1.17

1.33

1.51

1.72

1.98

2.27

2.61

2.99

1 1/4" SP RPM

1289 1341 1403 1469 1540 1615 1694 1775 1860 1947 2035 2124 2215 2307 3.85

4.35

4.90

5.51

6.17

6.90

7.69

2399 2493 2586 8.54

9.48

10.48

2681

5" SP

11.57

BHP

1.67

1.86

2.09

2.35

2.66

3.01

3.41

1 1/2" SP RPM

1423 1478 1539 1606 1676 1751 1829 1909 1993 2079 2165 2254 2344 4.31

4.83

5.40

6.03

6.71

7.45

8.26

2435 2527 2619 9.15

10.10

11.13

2712 12.23

5 1/2" SP BHP

2.24

2.49

2.76

3.08

3.44

3.85

CFM

7062 7704 8346 8988 9630 10272 10914 11556 12198 12840 13482 14124 14766 15408 16050

RPM

1809 1857 1913 1975 2040 2109 2180 2255 2332 2412 2493 2577 2663 2749 2837

BHP

4.59

4.98

5.39

5.84

6.35

6.92

7.54

8.23

8.99

9.82

10.70

11.66

12.70

13.80

15.00

RPM

1980 2026 2081 2142 2206 2273 2343 2416 2492 2569 2649 2731 2815 2900

BHP

6.01

6.48

6.96

7.49

8.08

8.73

9.43

10.22

11.07

12.00

12.99

14.06

15.22

16.45

RPM

2140 2186 2241 2301 2364 2430 2499 2571 2645 2722 2800 2881 2963

BHP

7.60

8.13

8.70

9.31

9.98

10.71

11.51

12.40

13.33

14.38

15.48

16.66

17.92

RPM

2292 2339 2394 2454 2516 2582 2650 2721 2794 2869 2947 -

BHP

9.34

9.96

10.61

11.30

12.05

12.88

13.77

14.74

15.81

16.93

18.15

-

RPM

2437 2485 2541 2600 2664 2728 2797 2866 2939 -

BHP

11.25

11.95

12.68

13.46

14.31

15.21

16.22

17.29

18.45

-

RPM

2577 2627 2682 2743 2805 2871 2938 -

BHP

13.32

14.10

14.90

15.78

16.72

17.74

18.84

-

RPM

2672 2713 2764 2821 2881 2944 -

BHP

14.72

15.56

16.40

17.31

18.28

19.32

-

RPM

2801 2846 2898 -

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP RPM

1625 1675 1734 1797 1864 1935 2009 2086 2166 2248 2332 2418 5.29

5.83

6.43

7.10

7.82

8.61

9.46

2506 2594 2684 10.39

11.38

12.46

2775

6" SP

13.60

BHP

3.33

3.64

3.99

4.37

4.81

-

BHP

17.03

17.95

18.89

22

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

030

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

30 in.

Maximum RPM

2475

Tip Speed (FPM)

7.85 x RPM

Bare Fan Weight

550 lbs.

Inlet/Outlet Diameter (Area)

30.31 in. (5.01 sq. ft.) 6852 7994 9136 10278 11420 12562 13704 14846 15988 17130 18272 19414 20556 21698 22840 23982 25124 26266 27408 28550

CFM 0" SP RPM

549 641 733 824 916 1007 1099 1190 1282 1374 1465 1557 1648 1740 1831 1923 4.15

5.03

6.04

7.17

8.43

9.83

11.38

2015 2106 2198 13.09

14.95

16.99

2289 19.21

2 1/2" SP BHP

0.27

0.42

0.63

0.90

1.23

1.64

2.12

2.70

3.37

1/4" SP RPM

644 722 805 889 975 1061 1149 1237 1326 1415 1504 1593 1683 1773 1863 1953 4.83

5.75

6.81

7.98

9.29

10.73

12.33

2043 2134 2224 14.07

15.99

18.08

2315

3" SP

20.32

BHP

0.56

0.75

1.00

1.31

1.69

2.14

2.67

3.29

4.01

1/2" SP RPM

737 802 874 950 1030 1112 1195 1280 1366 1453 1540 1628 1715 1804 1893 1981 5.52

6.50

7.59

8.80

10.15

11.64

13.28

2071 2160 2250 15.07

17.02

19.15

2340 21.47

3 1/2" SP BHP

0.91

1.13

1.42

1.76

2.18

2.67

3.24

3.90

4.66

3/4" SP RPM

825 881 944 1012 1085 1162 1241 1322 1405 1490 1575 1660 1747 1834 1921 2009 6.24

7.25

8.38

9.64

11.03

12.57

14.25

2097 2186 2274 16.08

18.09

20.25

2363

4" SP

22.59

BHP

1.33

1.57

1.88

2.25

2.70

3.22

3.83

4.54

5.33

1" SP RPM

912 956 1012 1074 1141 1212 1287 1365 1445 1526 1609 1693 1778 1863 1949 2036 6.97

8.03

9.20

10.50

11.94

13.51

15.23

2123 2210 2298 17.11

19.16

21.36

2386 23.75

4 1/2" SP BHP

1.78

2.06

2.39

2.78

3.26

3.81

4.46

5.20

6.03

1 1/4" SP RPM

1030 1078 1135 1197 1263 1334 1407 1484 1563 1643 1725 1808 1892 1977 2062 7.73

8.82

10.03

11.37

12.85

14.46

16.22

2148 2235 2322 18.15

20.22

22.48

2409

5" SP

24.92

BHP

2.59

2.95

3.36

3.86

4.44

5.11

5.88

6.75

1 1/2" SP RPM

1143 1194 1252 1314 1380 1450 1524 1600 1678 1757 1839 1921 2004 2089 8.51

9.63

10.88

12.26

13.78

15.43

17.25

2174 2259 2345 19.20

21.32

23.62

2431 26.08

5 1/2" SP BHP

3.55

3.98

4.50

5.10

5.80

6.59

7.49

CFM

11420 12562 13704 14846 15988 17130 18272 19414 20556 21698 22840 23982 25124 26266 27408

RPM

1460 1508 1563 1621 1684 1749 1817 1888 1962 2037 2114 2193 2273 2354 2436

BHP

7.40

8.11

8.88

9.76

10.76

11.87

13.12

14.49

16.01

17.66

19.47

21.42

23.54

25.82

28.28

RPM

1602 1649 1704 1762 1823 1887 1954 2024 2096 2170 2246 2323 2402 -

BHP

9.77

10.61

11.53

12.57

13.72

15.00

16.43

18.00

19.72

21.58

23.60

25.79

28.15

-

RPM

1735 1784 1838 1895 1956 2020 2086 2155 2226 2299 2374 -

BHP

12.42

13.41

14.49

15.67

17.00

18.47

20.08

21.85

23.77

25.85

28.12

-

RPM

1823 1863 1912 1967 2024 2085 2148 2214 2282 2352 -

BHP

14.28

16.36

16.50

17.74

19.10

20.61

22.27

24.07

26.04

28.19

-

RPM

1943 1986 2036 2091 2149 2210 2272 2338 -

BHP

17.36

18.60

19.89

21.29

22.84

24.54

26.38

28.40

-

RPM

2060 2105 2156 2212 2270 2330 -

BHP

20.75

22.13

23.58

25.18

26.91

28.78

-

RPM

2136 2173 2221 2274 -

BHP

22.91

24.40

25.93

27.58

-

RPM

2243 2285 -

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP RPM

1309 1357 1413 1473 1537 1604 1674 1747 1822 1900 1979 2059 2141 10.14

11.33

12.65

14.10

15.69

17.42

19.30

2223 2307 2391 21.34

23.56

25.93

2475

6" SP

28.47

BHP

5.32

5.89

6.54

7.27

8.11

9.06

-

BHP

26.72

28.37

23

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

036

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

36 in.

Maximum RPM

2019

Tip Speed (FPM)

9.42 x RPM

Bare Fan Weight

850 lbs.

Inlet/Outlet Diameter (Area)

36.38 in. (7.21 sq. ft.)

CFM

8664 10108 11552 12996 14440 15884 17328 18772 20216 21660 23104 24548 25992 27436 28880 30324 31768 33212 34656 36100

CFM

14440 15884 17328 18772 20216 21660 23104 24548 25992 27436 28880 30324 31768 33212 34656 36100

RPM

1320 1351 1387 1428 1470 1515 1562 1610 1661 1712 1766 1820 1876 1933

0" SP RPM

402 469 536 603 670 737 804 871 938 1005 1072 1139 1206 1273 1340 1407 4.00

4.86

5.82

6.91

8.13

9.48

10.98

1474 1541 1608 12.62

14.42

16.39

1675 18.52

3" SP BHP

0.26

0.41

0.61

0.86

1.19

1.58

2.05

2.60

3.25

BHP

13.52

14.55

15.63

16.83

18.14

19.59

21.18

22.93

24.84

26.89

29.12

31.51

34.08

36.82

RPM

1427 1457 1494 1534 1576 1620 1666 1714 1763 1814 1867 1920 1975

1/4" SP RPM

491 546 604 664 725 788 851 915 979 1044 1108 1173 1239 1304 1370 1435 4.86

5.77

6.80

7.94

9.21

10.62

12.17

1501 1567 1633 13.87

15.73

17.75

1699 19.94

3 1/2" SP BHP

0.64

0.84

1.09

1.40

1.77

2.22

2.74

3.36

4.06

BHP

17.08

18.29

19.55

20.91

22.41

24.05

25.85

27.81

29.93

32.22

34.69

37.34

40.17

RPM

1528 1559 1596 1636 1677 1721 1767 1814 1862 1913 1964 2017

1/2" SP RPM

578 621 670 722 777 835 894 955 1017 1079 1142 1205 1269 1333 1397 1462 5.76

6.72

7.80

8.99

10.32

11.78

13.39

1527 1592 1657 15.14

17.06

19.13

1722 21.37

4" SP BHP

1.12

1.35

1.64

1.99

2.41

2.90

3.48

4.14

4.90

BHP

21.01

22.38

23.83

25.38

27.08

28.91

30.92

33.09

35.45

37.98

40.69

43.59

RPM

1625 1657 1694 1733 1775 1819 1864 1911 1959 2009 -

3/4" SP RPM

660 694 735 781 830 883 938 995 1054 1114 1175 1236 1298 1361 1424 1488 6.68

7.69

8.83

10.08

11.46

12.97

14.63

1551 1615 1680 16.44

18.40

20.53

1744 22.84

4 1/2" SP BHP

1.69

1.95

2.27

2.65

3.10

3.64

4.26

4.97

5.78

BHP

25.30

26.86

28.48

30.23

32.12

34.17

36.40

38.81

41.39

44.17

-

RPM

1718 1751 1788 1828 1870 1914 1958 2005 -

1" SP RPM

764 798 839 883 931 982 1036 1091 1149 1207 1267 1327 1389 1450 1513 7.64

8.70

9.88

11.18

12.62

14.19

15.89

1575 1638 1702 17.76

19.77

21.96

1766 24.31

5" SP BHP

2.63

2.98

3.38

3.86

4.43

5.09

5.84

6.69

BHP

29.95

31.69

33.50

35.46

37.56

39.83

42.28

44.92

-

RPM

1781 1809 1843 1880 1920 1962 2006 -

1 1/4" SP RPM

859 894 935 979 1027 1077 1129 1184 1240 1297 1356 1416 1476 1538 8.64

9.74

10.97

12.32

13.80

15.42

17.18

1599 1661 1724 19.10

21.17

23.39

1787 25.81

5 1/2" SP BHP

3.74

4.19

4.70

5.28

5.97

6.75

7.64

BHP

33.08

34.97

36.89

38.91

41.06

43.38

45.88

-

RPM

1867 1897 1932 1970 2010 -

1 1/2" SP RPM

949 985 1026 1071 1117 1167 1219 1273 1328 1385 1443 1502 1562 9.67

10.82

12.09

13.48

15.01

16.67

18.49

1623 1684 1746 20.45

22.57

24.86

1808 27.32

6" SP BHP

5.04

5.59

6.20

6.91

7.72

8.64

BHP

38.29

40.35

42.46

44.69

47.06

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

RPM

1952 1984 2019 -

2" SP RPM

1083 1117 1156 1198 1243 1290 1339 1391 1444 1498 1556 1612 11.88

13.09

14.43

15.90

17.52

19.28

21.19

1670 1729 1789 23.24

25.46

27.85

1849 30.40

6 1/2" SP BHP

7.50

8.19

8.96

9.83

10.79

BHP

43.86

46.10

48.41

-

RPM

-

2 1/2" SP RPM

1206 1238 1275 1316 1360 1405 1453 1503 1554 1608 1662 14.26

15.52

16.93

18.47

20.15

22.00

23.98

1718 1775 1832 26.13

28.44

30.92

1891 33.57

7" SP BHP

10.32

11.18

12.10

13.12

-

BHP

24

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

042

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

42 in.

Maximum RPM

1620

Tip Speed (FPM)

11.00 x RPM

Bare Fan Weight

1050 lbs.

Inlet/Outlet Diameter (Area)

42.44 in. (9.82 sq. ft.)

CFM

11784 13748 15712 17676 19640 21604 23568 25532 27496 29460 31424 33388 35352 37316 39380 41244 43280 45172 47136 49100

CFM

19640 21604 23568 25532 27496 29460 31424 33388 35352 37316 39280 41244 43280 45172 47136 49100

RPM

1033 1060 1093 1128 1165 1204 1245 1288 1332 1377 1424 1472 1520 1570 1620

0" SP RPM

344 402 459 517 574 631 689 746 804 861 918 976 1033 1091 1148 1205 5.50

6.67

8.00

9.50

11.17

13.03

15.08

1263 1320 1378 17.34

19.81

22.51

1435 25.45

2 1/2" SP BHP

0.35

0.56

0.83

1.19

1.63

2.17

2.81

3.58

4.47

BHP

14.05

15.22

16.48

17.87

19.43

21.16

23.07

25.18

27.49

29.99

32.72

35.66

38.82

42.22

45.86

RPM

1131 1157 1189 1223 1260 1298 1338 1380 1423 1467 1513 1559 1607 -

1/4" SP RPM

421 467 517 569 621 675 729 784 839 894 949 1005 1061 1117 1173 1230 6.66

7.91

9.32

10.89

12.63

14.57

16.70

1286 1342 1399 19.03

21.58

24.36

1455 27.36

3" SP BHP

0.87

1.14

1.49

1.91

2.43

3.04

3.76

4.60

5.56

BHP

18.40

19.80

21.28

22.91

24.70

26.69

28.86

31.25

33.85

36.67

39.72

42.99

46.51

-

RPM

1223 1249 1280 1314 1350 1388 1428 1468 1511 1554 1599 -

1/2" SP RPM

495 532 574 618 666 715 766 818 871 924 978 1032 1087 1142 1197 1252 7.88

9.19

10.67

12.32

14.14

16.14

18.35

1308 1363 1419 20.75

23.38

26.23

1475 29.32

3 1/2" SP BHP

1.52

1.84

2.23

2.71

3.29

3.97

4.76

5.67

6.70

BHP

23.25

24.89

26.61

28.47

30.52

32.77

35.22

37.89

40.80

43.94

47.32

-

RPM

1309 1336 1367 1401 1437 1475 1514 1554 1596 -

3/4" SP RPM

566 594 630 669 711 756 804 853 903 954 1006 1059 1112 1166 1220 1274 9.13

10.52

12.07

13.79

15.68

17.75

20.03

1329 1384 1439 22.53

25.21

28.13

1494 31.28

4" SP BHP

2.30

2.66

3.09

3.61

4.23

4.97

5.81

6.79

7.89

BHP

28.58

30.47

32.43

34.56

36.86

39.38

42.14

45.10

48.31

-

RPM

1392 1420 1451 1485 1521 1558 -

1" SP RPM

655 684 719 757 798 842 887 935 984 1034 1085 1137 1189 1242 1296 10.43

11.89

13.50

15.29

17.25

19.40

21.75

1350 1404 1458 24.30

27.07

30.06

1512 33.29

4 1/2" SP BHP

3.57

4.05

4.61

5.27

6.04

6.94

7.96

9.13

BHP

34.43

36.55

38.77

41.16

43.74

46.54

-

RPM

1472 1501 1532 1566

1 1/4" SP RPM

736 766 801 839 880 922 967 1014 1062 1111 1162 1213 1265 1317 11.78

13.30

14.98

16.83

18.86

21.08

23.49

1370 1423 1477 26.12

28.95

32.01

1530 35.31

5" SP BHP

5.10

5.70

6.39

7.20

8.14

9.21

10.42

-

BHP

40.77

43.12

45.61

48.27

-

RPM

1526 1550 -

1 1/2" SP RPM

813 844 879 917 957 1000 1044 1090 1138 1187 1236 1287 1338 13.19

14.76

16.50

18.40

20.50

22.78

25.27

1390 1443 1495 27.96

30.87

34.01

1549 37.37

5 1/2" SP BHP

6.86

7.61

8.44

9.41

10.52

11.78

-

BHP

45.03

47.60

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

-

RPM

-

2" SP RPM

928 957 990 1026 1065 1105 1147 1191 1237 1284 1332 1381 16.18

17.84

19.68

21.70

23.90

26.31

28.92

1431 1481 1532 31.74

34.79

38.05

1584 41.56

5 1/2" SP BHP

10.20

11.15

12.19

13.37

14.69

-

BHP

25

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

048

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

48 in.

Maximum RPM

1576

Tip Speed (FPM)

12.57 x RPM

Bare Fan Weight

1400 lbs.

Inlet/Outlet Diameter (Area)

48.50 in. (12.83 sq. ft.)

CFM

30792 33358 35924 38490 41056 43622 46188 48754 51320 53886 56452 59018 61584 64150 15396 17962 20528 23094 25660 28226 30792 33358 35924 38490 41056 43622 46188 48754 51320 53886 56452 59018 61584 64150

CFM RPM

990 1013 1040 1071 1103 1136 1171 1207 1245 1284 1324 1365 1407 1449

0" SP RPM

301 352 402 452 502 553 603 653 703 754 804 854 904 954 1005 1055 7.18

8.72

10.46

12.41

14.60

17.03

19.71

1105 1155 1206 22.67

25.90

29.43

1256 33.26

3" SP BHP

0.46

0.73

1.09

1.55

2.13

2.83

3.68

4.68

5.84

BHP

24.03

25.87

27.82

29.94

32.28

34.87

37.72

40.84

44.23

47.92

51.90

56.19

60.78

65.68

RPM

1070 1093 1120 1150 1182 1215 1249 1285 1322 1360 1399 1440 1481

1/4" SP RPM

368 409 452 498 544 591 638 686 734 782 831 880 929 978 1027 1076 8.71

10.34

12.18

14.23

16.52

19.04

21.82

1125 1175 1224 24.87

28.21

31.83

1274 35.76

3 1/2" SP BHP

1.13

1.49

1.94

2.50

3.17

3.97

4.91

6.01

7.27

BHP

30.37

32.51

34.77

37.20

39.88

42.82

46.02

49.51

53.31

57.42

61.83

66.56

71.61

RPM

1146 1169 1197 1226 1258 1291 1325 1360 1396 1434 1473 1513

1/2" SP RPM

433 466 502 541 583 626 671 716 762 809 856 904 951 999 1048 1096 10.29

12.02

13.95

16.10

18.48

21.10

23.98

1145 1193 1242 27.13

30.56

34.28

1291 38.31

4" SP BHP

1.99

2.40

2.91

3.54

4.30

5.19

6.22

7.40

8.76

BHP

37.35

39.81

42.38

45.15

48.17

51.46

55.05

58.93

63.13

67.66

72.53

77.71

RPM

1218 1242 1270 1300 1331 1364 1398 1433 1469 1506 1544

3/4" SP RPM

495 520 551 586 623 662 703 746 790 835 881 927 973 1020 1068 1115 11.93

13.75

15.78

18.02

20.49

23.21

26.19

1163 1211 1259 29.42

32.95

36.76

1308 40.89

4 1/2" SP BHP

3.00

3.48

4.03

4.71

5.53

6.49

7.60

8.87

10.31

BHP

44.98

47.76

50.66

53.78

57.16

60.82

64.79

69.08

73.71

78.69

83.99

RPM

1289 1313 1341 1371 1402 1435 1469 1503 1539 1576

1" SP RPM

573 598 629 662 698 736 777 818 861 905 950 995 1041 1087 1134 13.63

15.53

17.65

19.98

22.54

25.36

28.42

1181 1228 1276 31.75

35.38

39.29

1324 43.51

5" SP BHP

4.67

5.30

6.02

6.88

7.89

9.07

10.41

11.92

BHP

53.27

56.35

59.59

63.07

66.84

70.89

75.27

79.97

85.06

90.46

RPM

1336 1356 1382 1410 1440 1471 1504 1538 1572 -

1 1/4" SP RPM

644 670 701 734 770 807 846 887 930 973 1017 1061 1107 1153 15.40

17.38

19.57

21.99

24.65

27.54

30.70

1199 1246 1292 34.13

37.84

41.85

1340 46.16

5 1/2" SP BHP

6.66

7.45

8.35

9.41

10.63

12.03

13.62

BHP

58.83

62.19

65.60

69.22

73.08

77.21

81.66

86.48

91.62

-

RPM

1400 1423 1449 1477 1507 1539 1572 -

1 1/2" SP RPM

711 739 769 803 838 875 914 954 996 1039 1082 1126 1171 17.24

19.29

21.56

24.06

26.79

29.78

33.02

1217 1262 1309 36.54

40.34

44.43

1355 48.84

6" SP BHP

8.97

9.94

11.03

12.30

13.75

15.39

BHP

68.09

71.75

75.53

79.51

83.74

88.27

93.16

-

RPM

1464 1487 1514 1543 1573 -

2" SP RPM

812 837 867 898 932 967 1004 1043 1082 1124 1166 1209 21.14

23.32

25.71

28.35

31.24

34.39

37.79

1252 1296 1341 41.49

45.45

49.73

1387 54.31

6 1/2" SP BHP

13.33

14.57

15.93

17.47

19.20

BHP

77.98

81.97

86.09

90.47

95.10

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

RPM

1506 1526 1551 -

2 1/2" SP RPM

904 928 956 987 1020 1054 1090 1127 1165 1205 1246 25.38

27.64

30.15

32.90

35.91

39.20

42.76

1288 1331 1374 46.60

50.74

55.17

1418 59.92

7" SP BHP

18.36

19.89

21.53

23.35

BHP

84.25

88.53

92.85

26

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

054

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

54 in.

Maximum RPM

1316

Tip Speed (FPM)

14.14 x RPM

Bare Fan Weight

2100 lbs.

Inlet/Outlet Diameter (Area)

54.56 in. (16.24 sq. ft.) 19488 22836 25984 29232 32480 35728 38976 42224 45472 48720 51968 55216 58464 61712 64960 68208 71456 74704 77952 81200

CFM 0" SP RPM

268 313 357 402 447 491 536 581 625 670 715 759 804 849 893 938 9.10

11.04

13.24

15.72

18.49

21.56

24.96

983 1027 1072 28.70

32.79

37.26

1117 42.11

2 1/2" SP BHP

0.58

0.92

1.38

1.96

2.70

3.59

4.66

5.92

7.40

1/4" SP RPM

327 364 402 442 483 525 567 610 652 695 739 782 826 869 913 957 11.02

13.09

15.42

18.02

20.91

24.11

27.63

1001 1044 1088 31.49

35.71

40.30

1132

3" SP

45.28

BHP

1.43

1.89

2.46

3.16

4.01

5.03

6.22

7.60

9.20

1/2" SP RPM

385 414 446 481 518 557 596 637 678 719 761 803 846 888 931 974 13.03

15.22

17.66

20.38

23.40

26.72

30.36

1018 1061 1104 34.35

38.69

43.40

1148 48.51

3 1/2" SP BHP

2.52

3.04

3.69

4.49

5.44

6.56

7.87

9.37

11.09

3/4" SP RPM

440 462 490 521 553 588 625 663 702 742 783 824 865 907 949 991 15.11

17.41

19.97

22.81

25.94

29.38

33.15

1034 1077 1119 37.26

41.72

46.58

1162

4" SP

51.77

BHP

3.80

4.40

5.11

5.97

7.00

8.21

9.62

11.23

13.05

1" SP RPM

509 532 559 589 621 655 690 727 766 805 844 885 925 967 1008 17.26

19.67

22.34

25.29

28.54

32.10

35.99

1050 1092 1134 40.21

44.79

49.74

1177 55.09

4 1/2" SP BHP

5.91

6.70

7.62

8.71

9.99

11.47

13.17

15.10

1 1/4" SP RPM

573 596 623 653 684 718 753 789 826 865 904 944 984 1025 19.49

22.00

24.78

27.84

31.20

34.87

38.87

1066 1107 1149 43.20

47.90

52.97

1191

5" SP

58.43

BHP

8.43

9.43

10.58

11.91

13.46

15.23

17.24

1 1/2" SP RPM

632 657 684 714 745 778 812 848 885 923 962 1001 1041 21.82

24.42

27.29

30.45

33.92

37.70

41.80

1082 1122 1163 46.26

51.07

56.26

1205 61.83

5 1/2" SP BHP

11.35

12.58

13.97

15.57

17.40

19.48

CFM

35728 38976 42224 45472 48720 51968 55216 58464 61712 64960 68208 71456 74704 77952 81200

RPM

804 825 850 877 906 937 969 1002 1036 1071 1108 1145 1183 1221 1260

BHP

23.23

25.18

27.26

29.56

32.13

34.99

38.16

41.65

45.46

49.62

54.13

58.99

64.23

69.84

75.86

RPM

880 900 925 952 980 1010 1041 1073 1107 1141 1177 1213 1250 1288

BHP

30.42

32.75

35.21

37.90

40.86

44.14

47.75

51.69

56.01

60.67

65.71

71.13

76.94

83.16

RPM

951 971 996 1022 1051 1080 1111 1142 1175 1209 1244 1280 1316

BHP

38.44

41.15

44.01

47.09

50.48

54.19

58.26

62.68

67.48

72.68

78.27

84.25

90.66

RPM

1018 1039 1064 1090 1118 1147 1178 1209 1241 1275 1309 -

BHP

47.28

50.39

53.64

57.16

60.98

65.14

69.67

74.61

79.93

85.65

91.79

-

RPM

1083 1104 1129 1155 1183 1212 1242 1274 1306 -

BHP

56.94

60.44

64.12

68.07

72.35

76.99

82.02

87.45

93.31

-

RPM

1145 1167 1192 1219 1247 1276 1305 -

BHP

67.42

71.33

75.45

79.83

84.60

89.74

95.27

-

RPM

1187 1206 1228 1253 1280 -

BHP

74.47

78.70

83.03

87.61

92.48

-

RPM

1245 1265 1288 -

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

2" SP RPM

722 744 770 798 828 860 893 927 962 999 1036 1074 26.77

29.51

32.55

35.90

39.55

43.53

47.85

1113 1153 1192 1233

6" SP

52.51

57.55

62.95

-

BHP

16.87

18.44

21.17

22.11

24.30

-

BHP

86.19

90.81

95.60

27

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

060

| BELT DRIVE PERFORMANCE DATA

Wheel Diameter

60 in.

Maximum RPM

1134

Tip Speed (FPM)

15.71 x RPM

Bare Fan Weight

2500 lbs.

Inlet/Outlet Diameter (Area)

60.63 in. (20.05 sq. ft.)

CFM

24060 28070 32080 36090 40100 44110 48120 52130 56140 60150 64160 68170 72180 76190 80200 84210 88220 92230 96240 100250

CFM

40100 44110 48120 52130 56140 60150 64160 68170 72180 76190 80200 84210 88220 92230 96240 100250

RPM

724 742 765 790 816 843 872 902 932 964 997 1030 1065 1099 1134

0" SP RPM

241 281 322 362 402 442 482 523 563 603 643 683 724 764 804 844 11.23

13.63

16.35

19.41

22.83

26.63

30.83

84 925 965 35.44

40.50

46.02

1005 52.01

2 1/2" SP BHP

0.72

1.14

1.70

2.43

3.33

4.43

5.75

7.31

9.13

BHP

28.68

31.09

33.64

36.50

39.66

43.22

47.13

51.43

56.14

61.25

66.81

72.81

79.32

86.27

93.66

RPM

792 810 932 856 882 909 937 966 996 1027 1059 1092 1125 -

1/4" SP RPM

295 327 362 398 435 473 510 549 587 626 665 704 743 782 822 861 13.62

16.17

19.05

22.25

25.82

29.77

34.13

900 940 980 38.88

44.10

49.74

1019

3" SP

55.93

BHP

1.77

2.33

3.04

3.90

4.95

6.21

7.67

9.39

11.36

BHP

37.55

40.44

43.45

46.77

50.45

54.49

58.93

63.82

69.17

74.92

81.15

87.78

94.97

-

RPM

856 874 896 920 946 972 1000 1028 1058 1088 1120 -

1/2" SP RPM

347 373 402 433 466 501 537 573 610 647 685 723 761 800 838 877 16.09

18.79

21.82

25.18

28.90

33.01

37.49

916 955 994 42.43

47.77

53.59

1033 59.87

3 1/2" SP BHP

3.11

3.75

4.56

5.54

6.72

8.10

9.72

11.57

13.69

BHP

47.44

50.80

54.33

58.12

62.33

66.91

71.92

77.39

83.32

89.70

96.63

-

RPM

917 935 957 981 1006 1033 1060 1088 1117 -

3/4" SP RPM

396 416 441 468 498 530 563 597 632 668 705 742 779 816 854 892 18.65

21.49

24.65

28.18

32.03

36.28

40.92

931 969 1007 46.02

51.51

57.46

1046

4" SP

63.92

BHP

4.69

5.43

6.31

7.37

8.65

10.14

11.87

13.86

16.12

BHP

58.35

62.18

66.22

70.58

75.28

80.44

86.04

92.08

98.72

975 994 1016 1040 1065 1091 -

1" SP RPM

458 479 503 530 559 589 621 655 689 724 760 796 833 870 907 21.31

24.29

27.59

31.22

35.23

39.64

44.42

945 983 1021 49.67

55.30

61.40

1059 68.03

4 1/2" SP BHP

7.29

8.28

9.41

10.75

12.34

14.17

16.26

18.64

RPM

-

BHP

70.29

74.61

79.16

84.02

89.33

95.04

-

RPM

1031 1051 1073 1097

1 1/4" SP RPM

515 536 561 588 616 646 677 710 744 778 814 849 886 922 24.06

27.16

30.60

34.39

38.51

43.04

48.01

959 997 1034 53.35

59.15

65.43

1072

5" SP

72.17

BHP

10.40

11.64

13.06

14.71

16.62

18.81

21.28

-

BHP

83.22

88.05

93.16

98.54

-

RPM

1069 1085 -

1 1/2" SP RPM

569 591 616 642 670 700 731 764 797 831 866 901 937 26.94

30.15

33.69

37.59

41.87

46.53

51.64

973 1010 1047 57.12

63.07

69.44

1084 76.35

5 1/2" SP BHP

14.02

15.52

17.25

19.22

21.49

24.04

-

BHP

91.93

97.16

-

-

-

BHP

20.83

22.76

24.90

27.30

30.00

33.05

36.44

40.18

44.32

48.83

53.74

59.08

64.82

71.05

77.73

84.91

RPM

650 670 693 719 745 774 803 834 866 899 933 967 1002 1037 1073 1109

2" SP -

-

-

-

Performance shown is for Installation Type D: ducted inlet, ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. Power rating (BHP) does not include drive losses.

28

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

ENGINEERING SPECIFICATIONS Model

AVD AVB

Unit Size

12, 15, 18 , 21, 24, 30, 36, 42, 48, 54, 60

Propeller Type

LV8 = Standard (Aluminum) 095-Steel

Propeller Pitch

12, 18, 24, 30, X = Special

Fan RPM

"See selection software."

Arrangement

4 = Direct Drive 9 = Belt Drive X = Special

Motor Position

"See selection software."

Unit Material

A = Aluminum D = Hot Dipped Galvanized H = Steel M = 30455 SS R = 31655 Air Stream S = 304SS U = 316SS X = Special

Unit Mounting

C = Horizontal Ceiling Hung U = Vertical Upblast D = Vertical Downblast B = Horizontal Base Mounted

AMCA Class

A = Class A B = Class B C = Class C 0 = None X = Special

Application CFM

"See selection software."

Application Static Pressure

"See selection software."

Motor Frame Size

"See selection software."

Motor & Mounting

FF = Factory Supplied and Factory Installed FC = Factory Supplied and Customer Installed CC = Customer Supplied and Customer Installed CF = Customer Supplied and Factory Installed

AMP Rating

30, 60, 100, 200 0 = None

Motor HP

"See selection software."

Motor RPM

"See selection software."

Motor Enclosure

A = Auto E = Expl O = ODP S = Severe DTY T = TEFC X = Special

Motor Voltage

"See selection software."

Motor Phase

1 = 1 Phase 3 = 3 Phase

Motor Frequency

5 = 50 Hz 6 = 60 Hz

Motor Efficiency

S = Standard P = Premium

Drive Kit

A = Adjustable C = Constant 0 = None X = Special

Paint/Coating

0 = None A = Standard (Enamel) B = Air Dried Epoxy* C = Air Dried Airstream Epoxy* D = Air Dried Heresite* E = Air Dried Airstream Heresite* R = High Temperature* X = Special *Not available with choice of color

Color

0 = None 00 = Standard Gray 50 = Chrome Green 53 = Williamsburg Blue 55 = Pale Green 56 = Dove Gray 61 = White 63 = Oxford Beige 65 = Dover White 66 = Desert Tan 70 = Black 73 = Smoke Gray 77 = Brick Red 79 = Peppercorn 81 = Pale Brown 83 = Chocolate Brown 85 = Timeless Bronze 94 = Charcoal X = Special

Access Door

B = Bolt On H = Hinged 0 = None X = Special

Bearings

A = 40,000 B = 80,000 C = 200,000 0 = None

Shaft Type

0 = None H = Steel S = 304SS U = 316SS

Belt Guard

Y = Yes N = No

Curb Cap

Y = Yes N = No

Discharge Cap

Y = Yes N = No 29

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

ENGINEERING SPECIFICATIONS Cone

I = Inlet U = Outlet B = Both 0 = None X = Special

Special Construction

F = Full Access S = Swingout 0 = None X = Special

Weather Cover

Y = Yes N = No

Disconnect Switch

"See selection software"

Companion Flange

0 = None I = Inlet B = Both U = Outlet

Screen

I = Inlet U = Outlet B = Both 0 = None X = Special

Inlet Vane

V = Variable 0 = None

CONFIGURATION

1.1 Fans shall be tested and rated in accordance with AMCA methods and standards.

1.2 The fans shall be licensed to bear the AMCA Seal for air. The ratings shown in the product catalog must be based on tests and procedures performed in accordance with AMCA publication 211 and shall comply with the requirements of the AMCA Certified Ratings Program.

1.3 Fans shall conform to AMCA 99 Standards.

DIRECT DRIVE

2.1 The fan shall be of an axial flow vaneaxial type configuration with a bolt-on straightening vane section.

2.2 The fan shall be direct drive with the propeller mounted on the motor shaft by means of a taper lock bushing.

2.3 The fan casing shall be of all welded construction with a flanged inlet and outlet, and shall be constructed completely of carbon steel, stainless steel (type 316 or 304) or aluminum as indicated on fan schedule.

2.4 A bolt-on straightening vane section shall be mounted on the discharge end of the fan housing.

2.5 The propeller shall be constructed of 319F cast aluminum material with the cast blades welded to the cast hub per AWS welding standards. The hub is designed to incorporate a taper lock bushing and keyed to the motor shaft.

2.6 The fan shall be coated with enamel as standard or optional other available coating as made available by coating suppliers and as indicated on the fan schedule.

3.0 The motor shall be of a typical NEMA-T frame type and standard in nature with the motor industry availability. The electric motor shall be as indicated on the fan schedule and is available in any enclosure as made available from the motor vendors.

3.1 The motor leads shall be extended through the fan casing for accessibility.

3.2 The fan shall be factory dynamically balanced at operating speed per AMCA 204 Grade BV-3/ ANSI S2.19 G 6.3 and the results recorded on a label placed on the fan assembly.

Isolator

R = Rubber in Shear S = Spring 0 = None X = Special

Shaft Seal

Y = Yes N = No

BELT DRIVE

2.1 The fan shall be of an axial flow vaneaxial type configuration with a bolt-on straightening vane section.

2.2 The fan shall be belt drive, sized for 1.5 service factor. Motor is mounted externally on the fan casing and not exposed to the air stream.

2.3 The fan casing shall be of all welded construction with a flanged inlet and outlet, and shall be constructed completely of carbon steel, stainless steel (type 316 or 304) or aluminum as indicated on fan schedule.

2.3.1 The fan shall have an inner tube section, fully welded protecting the shaft, bearings and drive components from direct air stream exposure.

2.3.2 The inner tube assembly shall have removable end covers to allow for access to the bearing and drive assembly.

2.4 The fan shaft shall be steel, ground for precision fit to bearings and keyed for driving the impeller and drive sheave.

2.5 Fan bearings shall be cast iron housing, self-aligning, re-lubricatable 30

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

ENGINEERING SPECIFICATIONS

bearings with grease lines extended to the exterior of the casing. A.F.B.M.A. Bearing L schedule.

10 life of 40,000 hours.

2.6 The propeller shall be constructed of 319F cast aluminum material with the cast blades welded to the cast hub per AWS welding standards. The hub is designed to incorporate a taper lock bushing and keyed to the fan shaft.

2.7 The motor mounting base is configured to allow for various frame sizes and designed to allow for belt tensioning.

2.8 The fan shall be coated with enamel as standard or optional other available coating as made available by coating suppliers and as indicated on the fan 2.9 The fan shall be of AMCA spark resistant construction when required and as indicated on the fan schedule as AMCA “A”, “B” or “C” as defined by AMCA Standard 99.

3.0 The motor shall be of a typical NEMA-T frame type and standard in nature with the motor industry availability. The electric motor shall be as indicated on the fan schedule.

3.1 The fan shall be factory dynamically balanced at operating speed per AMCA 204 Grade BV-3/ ANSI S2. G 6.3 and the results recorded on a label placed on the fan assembly.

31

YORK® HEAVY DUTY VANEAXIAL FAN, AV SERIES

NOTES

32

NOTES

Printed on recycled paper.

Johnson Controls, the Johnson Controls logo, YORK® and Heresite® are trademarks of Johnson Controls, Inc., or its affiliates, in the United States of American and/or other countries.

©2017 Johnson Controls, Inc., P.O. Box 423, Milwaukee, WI 53201 Printed in USA PUBL-7630/7631 AV March 2017 www.johnsoncontrols.com

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement