3M Lava™ Zirconia Blocks Guide

3M Lava™ Zirconia Blocks Guide
Indications Overview for Lava™ Zirconia
Lava Zirconia Framework
Lava All-Zirconia
Hand-layered
Veneering
Veneering with
Lava™ DVS Digital
Veneering System
Pressed-over
Veneering
Full-contour or
partially
veneered
Crowns (anterior and posterior)
●
●
●
●1
Splinted crowns2
●
—
●
●1
3-4 unit bridges
●
—
●
●1
Long-span and curved
bridges (up to 48 mm) 3
●
—
●
●1
Cantilever bridges4
●
—
●
●
3-unit Inlay and onlay bridges5
●
—
●
●
Anterior adhesive bridges
(Maryland bridges) 5
●
—
●
●
Primary Crowns
N/A
N/A
N/A
●
Crowns on implants
●
●
●
●
3-unit bridges on 2 implants
●
—
●
●
Zirconia build-up for
two-piece abutments
N/A
N/A
N/A
●
Indication
1. Released for patients with bruxism
2. Splinted crowns up to 4 units
3. 5+ unit bridges (up to 48 mm) with a maximum of two pontics next to one another in the posterior area and a maximum of four pontics next to one another in the anterior area.
(Only feasible with Lava™ Multi XL; in some regions Lava™ Multi XL is not available)
4. With a maximum of 1 pontics at the position of a premolar or incisor
5. Tests have proven: Lava™ Zirconia shows a sufficient strength for this indication. However, this type of indication overall can have a higher failure risk due to adhesion failure and
secondary caries regardless of manufacturer. Please refer to national and regional dental associations for more information
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement