Biostar J1800NH Motherboard Manual

Biostar J1800NH Motherboard Manual
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
UEFI BIOS Setup ........................................................................... 1
1 Main Menu................................................................................... 3
2 Advanced Menu.......................................................................... 4
3 Chipset Menu............................................................................ 18
4 Security Menu........................................................................... 22
5 Performance Menu ................................................................... 24
6 Boot Menu................................................................................. 26
7 Exit Menu .................................................................................. 27
i
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
UEFI BIOS Setup
Introduction
The purpose of this manual is to describe the settings in the AMI UEFI
BIOS Setup program on this motherboard. The Setup program allows
users to modify the basic system configuration and save these settings to
NVRAM.
UEFI BIOS determines what a computer can do without accessing
programs from a disk. This system controls most of the input and output
devices such as keyboard, mouse, serial ports and disk drives. BIOS
activates at the first stage of the booting process, loading and executing
the operating system. Some additional features, such as virus and
password protection or chipset fine-tuning options are also included in
UEFI BIOS.
The rest of this manual will to guide you through the options and settings
in UEFI BIOS Setup.
Plug and Play Support
This AMI UEFI BIOS supports the Plug and Play Version 1.0A
specification.
EPA Green PC Support
This AMI UEFI BIOS supports Version 1.03 of the EPA Green PC
specification.
ACPI Support
AMI ACPI UEFI BIOS support Version 1.0/2.0 of Advanced Configuration
and Power interface specification (ACPI). It provides ASL code for power
management and device configuration capabilities as defined in the ACPI
specification, developed by Microsoft, Intel and Toshiba.
PCI Bus Support
This AMI UEFI BIOS also supports Version 2.3 of the Intel PCI (Peripheral
Component Interconnect) local bus specification.
DRAM Support
DDR3L SO-DRAM (Double Data Rate III Synchronous DRAM) is
supported.
1
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Using Setup
When starting up the computer, press <Del> during the Power-On
Self-Test (POST) to enter the UEFI BIOS setup utility.
In the UEFI BIOS setup utility, you will see General Help description at
the top right corner, and this is providing a brief description of the selected
item. Navigation Keys for that particular menu are at the bottom right
corner, and you can use these keys to select item and change the
settings.
General Help
Navigation Keys
Notice
z
The default UEFI BIOS settings apply for most conditions to ensure
optimum performance of the motherboard. If the system becomes
unstable after changing any settings, please load the default settings
to ensure system’s compatibility and stability. Use Load Setup
Default under the Exit Menu.
z
For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described in this
manual is for your reference only. The actual UEFI BIOS information
and settings on board may be slightly different from this manual.
z
The content of this manual is subject to be changed without notice.
We will not be responsible for any mistakes found in this user’s
manual and any system damage that may be caused by
wrong-settings.
2
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
1 Main Menu
Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear
on the screen providing an overview of the basic system information.
BIOS Information
It shows system information including UEFI BIOS version, Project Code,
Model Name, Build Date and etc.
Total Memory
Shows system memory size, VGA shard memory will be excluded.
System Language
Choose the system default language.
System Date
Set the system date. Note that the ‘Day’ automatically changes when you
set the date.
System Time
Set the system internal clock.
3
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
2 Advanced Menu
The Advanced Menu allows you to configure the settings of CPU, Super
I/O, Power Management, and other system devices.
Notice
Beware of that setting inappropriate values in items of this menu may
cause system to malfunction.
ACPI Settings
Enable ACPI Auto Configuration
This item enables or disables BIOS ACPI Auto Configuration.
Options: Disabled (Default) / Enabled
4
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Enable Hibernation
This item enables or disables system ability to hibernate (OS/S4 Sleep
State). This option may be not effective with some OSes.
Options: Enabled (Default) / Disabled
ACPI Sleep State
This item selects the highest ACPI sleep state the system will enter when
the SUSPEND button is pressed.
Options: S3 only (Suspend to RAM) (Default) / Suspend Disabled
Lock Legacy Resources
The item enables or disables Lock of Legacy Resources.
Options: Disabled (Default) / Enabled
Ring-In Wake up from S5
This item enables the system to wake from S5 using Ring-In event.
Options:
Disabled (Default) / Enabled
PS2 Keyboard PowerOn
This item allows you to control the keyboard power on function.
Options:
Disabled (Default) / Any Key / Stroke Key / Specific Key
Stroke Keys
This item will show only when Keyboard PowerOn is set “Stroke Key.”
Options: Wake Key (Default) / Power Key / Ctrl+F1 / Ctrl+F2 / Ctrl+F3 / Ctrl
+F4 / Ctrl+F5 / Ctrl+F6
Specific Key
This item will show only when Keyboard PowerOn is set “Specific Key.” Press
Enter to set Specific key.
PS2 Mouse PowerOn
This item allows you to control the mouse power on function.
Options:
Disabled (Default) / Enabled
Restore AC Power Loss
Specify what state to go to when power is re-applied after a power failure.
Options:
Power Off (Default) / Power On / Last State
EuP Control
When EuP is enabled, the system will meet EuP requirement.
Options:
Disabled (Default) / Enabled
PME Wake up from S5
The item enables the system to wake from S5 using PME event.
Options:
Disabled (Default) / Enabled
5
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Wake system with Fixed Time
This item enables or disables the system to wake on by alarm event.
When this item is enabled, the system will wake on the hr::min::sec
specified.
Options:
Disabled (Default) / Enabled
Wake up date
You can choose which date the system will boot up.
Wake up hour / Wake up minute / Wake up second
You can choose the system boot up time, input hour, minute and second to
specify.
USB Device Wakeup from S3/S4
This item allows you to enable or disabled the USB resume from S3/S4
function.
Options:
Disabled (Default) / Enabled
Super IO Configuration
6
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Serial Port 1 Configuration
Serial Port
This item enables or disables Serial Port (COM).
Options: Enabled (Default) / Disabled
Change Settings
This item selects an optimal setting for Super IO device.
Options: Auto (Default) / IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12 / IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 / IO=3E8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 / IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12
Parallel Port Configuration
Parallel Port
This item enables or disables Parallel Port (LPT/LPTE).
Options: Enabled (Default) / Disabled
7
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Change Settings
This item allows you to select an optimal setting for Super IO device.
Options: Auto (Default) / IO=378h; IRQ=5; DMA=3 / IO=378h; IRQ=5, 6,
7, 9, 10, 11, 12; DMA=1,3 / IO=278h; IRQ=5, 6, 7, 9, 10, 11, 12;
DMA=1,3 / IO=3BCh; IRQ=5, 6, 7, 9, 10, 11, 12; DMA=1,3
Device Mode
This item allows you to change the Printer Port mode.
Options: EPP mode & ECP mode (Default) / Standard Parallet Port
mode(SPP) / EPP mode / ECP mode
IT8622E H/W Monitor
Intel (R) Smart Connect Technology
ISCT Support
This item enables/disables ISCT Support.
Options:
Disabled (Default) / Enabled
8
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Note: The following items appear only when you set the ISCT Support function to
[Enabled]
ISCT Notification Control
Options: Enabled (Default) / Disabled
CPU Configuration
This item shows CPU Information
Active Processor Cores
This item sets number of cores to enable in each processor package.
Options: All (Default) / 1
Limit CPUID Maximum
Disabled for Windows XP
Options: Disabled (Default) / Enabled
Execute-Disable Bit
XD can prevent certain classes of malicious buffer overflow attacks when
combined with a supporting OS (Windows Server 2003 SP1, Windows XP
SP2, SuSE Linux 9.2, RedHat Enterprise 3 Update 3.).
Options: Enabled (Default) / Disabled
Hardware Prefetcher
This item enables or disables the Mid Level Cache (L2) streamer
Prefetcher.
Options: Enabled (Default) / Disabled
Adjacent Cache Line Prefetch
This item enables or disables the Mid Level Cache (L2) prefetching of
adjacent cache lines.
Options: Enabled (Default) / Disabled
9
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Intel Virtualization Technology
When enabled, a VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology
Options: Enabled (Default) / Disabled
Power Technology
This item enables or disables the power management features.
Options: Custom (Default) / Energy Efficient / Disable
EIST
This item enables or disables Intel SpeedStep.
Options: Enabled (Default) / Disabled
Turbo Mode
This item enables or disables Turbo Mode.
Options: Enabled (Default) / Disabled
P-STATE Coordination
This item changes P-STATE coordination type.
Options: HW_ALL (Default) / SW_ALL / SW_ANY
CPU C6 report
This item enables or disables CPU C6 (ACPI C3) report to OS.
Options: Enabled (Default) / Disabled
CPU C7 report
This item enables or disables CPU C7 (ACPI C3) report to OS.
Options: Enabled (Default) / Disabled
Package C State limit
This item sets Package C State limit.
Options: No Limit (Default) / C0 / C1 / C3 / C6 / C7
10
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
SATA Configuration
The BIOS will automatically detect the presence of SATA devices.
Serial-ATA (SATA)
This item enables/disables Serial ATA Device.
Options: Enabled (Default) / Disabled
SATA Test Mode
This item enables/disables test mode.
Options: Disabled (Default) / Enabled
SATA Mode
This item determines how SATA controller(s) operate.
Options: AHCI Mode (Default) / IDE Mode
SATA1/2
This item enables/disables Serial ATA Port1/2.
Options: Enabled (Default) / Disabled
11
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
System Component
PMIC ACPI OBJECT
This item enables/disables PMIC ACPI Device.
Options: Enabled (Default) / Disabled
PNP Setting
This item selects PNP setting mode, Disable, Performance, Power or
Power & Performance mode.
Options: AX STEPPING (Default) / Disabled / AUTO / BX STEPPING
Witt Setting
It sets Test Device connected to I2C and URT for WHCK test.
Options: Disabled (Default) / Enabled
PCI Subsystem Settings
12
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
PCI Latency Timer
This item sets the value to be programmed into PCI Latency Timer
Register.
Options:
32 PCI Bus Clocks (Default) / 64 PCI Bus Clocks / 96 PCI Bus
Clocks / 128 PCI Bus Clocks / 160 PCI Bus Clocks / 192 PCI Bus Clocks /
224 PCI Bus Clocks / 248 PCI Bus Clocks
VGA Palette Snoop
This item enables/disables VGA Palette Registers Snooping.
Options:
Disabled (Default) / Enabled
ASPM Support
This item sets the ASPM Level: Force Los – Force all links to Los State;
AUTO – BIOS auto configure; Disable – Disables ASPM
Options:
Disabled (Default) / Auto / Force Los
Network Stack Configuration
Network Stack
This item enables or disables UEFI network stack
Options: Disabled (Default) / Enabled
Note: The following items appear only when you set the Network Stack function to
[Enabled]
IPv4 PXE Support
This item enables or disables IPv4 PXE Boot Support. If disabled IPv4 booth
option will not be created.
Options: Enabled (Default) / Disabled
13
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
IPv6 PXE Support
This item enables or disables IPv6 PXE Boot Support. If disabled IPv6 booth
option will not be created.
Options: Enabled (Default) / Disabled
PXE boot wait time
Wait time to press ESC key to abort the PXE boot.
CSM Configuration
CSM Support
This item enables or disables CSM Support
Options:
Disabled (Default) / Enabled
Note: The following items appear only when you set the CSM Support function to
[Enabled]
GateA20 Active
Upon Request – FA20 can be disabled using BIOS services. Always –
do not allow disabling GA20; this option is useful when any RT code is
executed above 1MB
Options: Upon Request (Default) / Always
Option ROM Messages
This item sets the display mode for option ROM.
Options: Force BIOS (Default) / Keep Current
14
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
INT19 Trap Response
BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE –
execute the trap right away; POSTPONED – execute the trap during
legacy boot.
Options: Postponed (Default) / Immediate
Boot option filter
This option controls what devices system can boot to.
Options: Legacy only (Default) / UEFI and Legacy / UEFI only
Network
This item controls the execution of UEFI and Legacy PXE OpROM
Options: Legacy only (Default) / Do not launch / UEFI only / Legacy first /
UEFI first
Storage
This item controls the execution of UEFI and Legacy Storage OpROM
Options: Legacy only (Default) / Do not launch / UEFI only / Legacy first /
UEFI first
Video
This item controls the execution of UEFI and Legacy Video OpROM
Options: Legacy only (Default) / Do not launch / UEFI only / Legacy first /
UEFI first
Other PCI device
It determines OpROM execution policy for devices other than Network,
Storage, or video.
Options: UEFI first (Default) / Legacy only
15
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
USB Configuration
Legacy USB Support
The item allows you to enable Legacy USB support. AUTO option disables
legacy support if no USB devices are connected. DISABLE option will
keep USB devices available only for EFI applications.
Options: Enabled (Default) / Disabled / Auto
USB3.0 Support
The item enables/disables USB3.0 (XHCI) controller support.
Options: Enabled (Default) / Disabled
XHCI Hand-off
This is workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
Options: Enabled (Default) / Disabled
EHCI Hand-off
This is workaround for OSes without EHCI hand-off support. The EHCI
ownership change should be claimed by EHCI driver.
Options: Disabled (Default) / Enabled
USB Mass Storage Driver Support
The item allows you to enable or disable USB Mass Storage Driver
Support.
Options: Enabled (Default) / Disabled
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Options: 20 sec (Default) / 1 sec / 5 sec / 10 sec
16
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Device reset time-out
The item sets USB mass storage device Start Unit command time-out.
Options: 20 sec (Default) / 10 sec / 30 sec / 40 sec
Device power-up delay
“Auto” uses default value: for a Root port it is 100ms, for a Hub port the
delay is taken from Hub descriptor.
Options: Auto (Default) / Manual
Note: The following items appear only when you set the Device power-up delay function
to [Manual]
Device power-up delay in seconds
Delay range is 1 ~ 40 seconds, in one second increments.
Options:
5 (Default)
Realtek PCIe FE Family Controller
17
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
3 Chipset Menu
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of the CPU itself uses when communicating
with its own special components.
Notice
Beware of that setting inappropriate values in items of this menu may
cause system to malfunction.
North Bridge
18
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Integrated Graphics Device
Enable: Enable Integrated Graphics Device (IGD) when selected as the
Primary Video Adaptor. Disable: Always disable IGD.
Options:
Auto (Default) / Disabled
Integrated Graphics Device
Enable: IGD Turbo Enable. Disable: IGD Turbo Disable.
Options:
Enabled (Default) / Disabled
Primary Display
This item selects which of IGD/PCI Graphics device should be Primary
Display.
Options:
IGD (Default) / PCI
GFX Boost
This item enables/disables GFX Boost.
Options:
Disabled (Default) / Enabled
PAVC
This item enables/disables Protected Audio Video Control.
Options:
LITE Mode (Default) / Disabled / SERPENT Mode
DVMT Pre-Allocated
This item selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device.
Options:
64M (Default) / 96M / 128M / 160M / 192M / 224M / 256M /
288M / 320M / 352M / 384M / 416M / 448M / 480M / 512M
DVMT Total Gfx Mem
This item selects DVMT5.0 Total Graphic Memory size used by the
Internal Graphics Device.
Options:
256MB (Default) / 128MB / MAX
Aperture Size
This item selects the Aperature Size.
Options:
256MB (Default) / 128MB / 512MB
GTT Size
This item selects the GTT Size.
Options:
2MB (Default) / 1MB
RC6 (Render Standby)
This item enables or disables render standby support.
Options:
Enabled (Default) / Disabled
19
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Max TOLUD
Maximum Value of TOLUD
Options:
Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB
/ 2.25 GB / 2.5 GB / 2.75 GB / 3 GB
South Bridge
USB Configuration
XHCI Mode
This item enables or disables mode of operation of xHCI controller.
Options: Enabled (Default) / Disabled
USB Per Port Controller
This item controls each of the USB ports(0-3). Enable: Enable USB per port;
Disable: Use USB port x setting.
Options: Enabled (Default) / Disabled
20
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
USB Port 0/1/2/3
This item enables/disables USB port 0/1/2/3
Options: Enabled (Default) / Disabled
PCI Express Configuration
ASPM
This item sets PCI Express Active State Power Management settings.
Options: Disabled (Default) / L0s / L1 / L0sL1 / Auto
Speed
This item selects PCI Express port speed.
Options: Auto (Default) / Gen1 / Gen2
Onboard Lan
This item enables/disables the PCI Express Port 2 in the Chipset.
Options: Enabled (Default) / Disabled
Onboard LAN Option ROM
This item enables/disables Onboard LAN Option ROM.
Options: Disabled (Default) / Enabled
High Precision Timer
This item enables/disables the High Precision Event Timer.
Options:
Enabled (Default) / Disabled
21
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
4 Security Menu
Administrator Password
This item sets Administrator Password.
User Password
This item sets User Password.
Secure Boot Menu
Secure Boot
Secure Boot flow control. Secure Boot can be enabled only when 1.
Platform Key (PK) is enrolled and Platform is operating in user mode and
2.CSM function is disabled in Setup.
Options:
Disabled (Default) / Enabled
22
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
Key Management
Enroll All Factory Default Keys
Forces system to user Mode – Install all Factory Default keys (PK, KEK,
dbx, dbt). Change takes effect after boot.
Platform Key (PK)
Delete PK – Allows you to delete the PK file from your system.
Set new PK – Allows you set new PK file.
Key Exchange Key Database (KEK)
Delete KEK – Allows you to delete the KEK file from your system.
Set new KEK – Allows you set new KEK file.
Append Var to KEK – Allows you append Var to KEK.
Authorized Signature Database (DB)
Delete DB – Allows you to delete the DB file from your system.
Set new DB – Allows you set new DB file.
Append Var to DB – Allows you append Var to DB.
Authorized TimeStamps (DBT)
Delete DB – Allows you to delete the DBT file from your system.
Set new DB – Allows you set new DBT file.
Append Var to DB – Allows you append Var to DBT.
Forbidden Signature Database (DBX)
Delete DBX – Allows you to delete the DBX file from your system.
Set new DBX – Allows you set new DBK file.
Append Var to DBX – Allows you append Var to DBX.
23
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
5 Performance Menu
This submenu allows you to change voltage and clock of various devices.
(However, we suggest you use the default setting. Changing the voltage
and clock improperly may damage the device.)
Notice
z
Beware of that setting inappropriate values in items of this menu may
cause system to malfunction.
z
The options and default settings might be different by RAM or CPU
models.
DRAM Timing Select
This item sets DRAM Timing Select.
Options: Auto (SPD) (Default) / Manual
Note: The following items appear only when you set the DRAM Timing Select function to
[Manual]
CAS# Latency (tCL)
This item allows you to select CAS Latency, Range 4-24
Options: Auto (Default)
RAS# to CAS# Delay (tRCD)
This item allows you to select Row Address to Column Address Delay,
Range 3-20
Options: Auto (Default)
Row Precharge Time (tRP)
This item allows you to select Row Precharge Time, Range 3-15
Options: Auto (Default)
24
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
RAS# Active Time (tRAS)
This item allows you to select Row Active Time, Range 9-63
Options: Auto (Default)
Write Recovery Time (tWR)
This item allows you to select Internal Write to Read Command Delay,
Range 5-16
Options: Auto (Default)
Row Refresh Cycle Time (tRFC)
This item allows you to select Minimum Refresh Recovery Time, Range
1-511
Options: Auto (Default)
Write to Read Delay (tWTR)
This item allows you to select Internal Write to Read Command Delay,
Range 3-31
Options: Auto (Default)
Active to Active Delay (tRRD)
This item allows you to select Row Active to Row Active Delay, Range
4-15
Options: Auto (Default)
Read CAS# Precharge (tRTP)
This item allows you to select Read to Precharge Delay, Range 4-15
Options: Auto (Default)
Minimum CAS Write Latency Time
This item allows you to select Minimum CAS Write Latency Range,
Range 5-12
Options: Auto (Default)
Four Active Window Delay (tFAW)
This item allows you to select Four Active Window Delay, Range 10-63
Options: Auto (Default)
25
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
6 Boot Menu
This menu allows you to setup the system boot options.
Setup Prompt Timeout
This item sets number of seconds to wait for setup activation key.
Options:
1 (Default)
Bootup NumLock State
This item selects the keyboard NumLock state.
Options:
On (Default) / Off
Full Screen Logo Display
This item allows you to enable/disable Full Screen Logo Show function.
Options:
Enabled (Default) / Disabled
BIOS Flash protection
While enabled, it can’t flash write and flash erase by SMI.
Options:
Enabled (Default) / Disabled
Boot Success Beep
When this item is set to Enabled, BIOS will let user know boot success
with beep.
Options:
Enabled (Default) / Disabled
Boot Option Priorities
The items specify the boot device priority sequence from the available
devices. The number of device items that appears on the screen depends
on the number of devices installed in the system.
26
Intel Bay Trail Mini-ITX Motherboard UEFI BIOS Manual
7 Exit Menu
This menu allows you to load the optimal default settings, and save or
discard the changes to the BIOS items.
Discard Changes and Exit
Abandon all changes made during the current session and exit setup.
Save Changes and Reset
Reset the system after saving the changes.
Restore Defaults
This selection allows you to reload the BIOS when problem occurs during
system booting sequence. These configurations are factory settings
optimized for this system.
Launch EFI Shell from filesystem device
This item attempts to EFI Shell application (Shellx64.efi) from one of the
available filesystem devices.
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement