Platinum Series
40cm Pedestal Fan
Model: GPPF40C
General Care and Safety Guide
Thank you for choosing this Goldair Platinum product. This Goldair Platinum
appliance has been designed and manufactured to high standards of
engineering and with proper use and care, as described in this leaflet, will
give you years of useful service. Please read these instructions carefully and
keep them for future reference.
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the
appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
4. Ensure that the fan is switched off from the supply mains before removing
the guard.
5. Use only the voltage specified on the rating plate of the appliance.
6. Keep all objects at least 1 Metre from the front, sides and rear of the
appliance
7. This appliance is intended for household use only and not for commercial or
industrial use.
8. Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or
injury.
9. The common cause of overheating is deposits of dust or fluff in the
appliance. Ensure these deposits are removed regularly by unplugging the
appliance and vacuum cleaning the air vents and grills.
10. Always unplug appliance when not in use.
11. When the appliance has been unpacked, check it for transport damage and
ensure all parts have been delivered. If parts are missing or the appliance
has been damaged, contact the Goldair Customer Services Team.
12. If your appliance does not work, or is not working properly, contact the place
of purchase. Repair work on the appliance by unqualified persons can
cause serious risk to the user.
13. Ensure hands are dry before handling the plug or the main unit.
14. Carry out regular checks of the supply cord to ensure no damage is evident.
15. Ensure that the cord is fully extended (not coiled) while in use.
16. Avoid contact with the moving parts. Keep hands, hair, clothing, away from
blade of the fan during operation to reduce the risk of injury to person and/or
damage to the unit.
17. Switch off and use handles provided when moving.
18. It is recommended that this fan is plugged directly into the wall socket.
19. A correctly specified, undamaged extension cord may be used with this fan
provided it is used in a safe manner.
General Care and Safety Guide
20. Never place appliance close to radiant heat source.
21. Never operate in areas where petrol, paint or other flammable liquids are
used or stored.
22. Never use the appliance to dry clothes.
23. Never insert or allow foreign objects to enter any ventilation or exhaust
opening, as this may cause an electric shock, fire or damage to the
appliance.
24. Never use abrasive cleaning products on this appliance. Clean with a damp
cloth (not wet) rinsed in hot soapy water only. Always remove plug from the
mains supply before cleaning.
25. Never connect the appliance to mains supply until completely assembled
and adjusted.
26. Never remove plug from power socket until the appliance has been switched
off.
27. Never remove plug from power socket by pulling cord – always grip plug.
28. Never twist, kink or wrap the cord around the appliance, as this may cause
the insulation to weaken and split. Always ensure that all cord has been
removed from any cord storage area and is unrolled before use.
29. Never use this appliance in the immediate surrounds of a bath, a shower, or
a swimming pool or other liquids. The appliance must not be immersed in
any liquids.
30. Due to the risk of injury, never use this appliance for any purpose other than
its intended use. This appliance is intended for use in household and similar
applications such as staff kitchen areas in shops, offices and other working
environments; farm houses, by clients in hotels, motels, bed and breakfast
type environments and other residential type environments
31. Never use this appliance outdoors.
32. Never operate the appliance with a damaged cord or plug, after it
malfunctions, or if it has been damaged in any manner. Have the appliance
checked and repaired by a qualified electrician if repair is necessary.
33. Never place the unit in wardrobes or other enclosed spaces as this may
cause fire hazards.
TECHNICAL SPECIFICATION
Model:
GPPF40C
Supply:
220 - 240VAC 50Hz
Wattage:
60W
Components
1.Front Grill
2.Blade Cap
3.Fan Blade
4.Guard Knob
5.Rear Grill
6.Control Switch
7.Oscillation Pin
8.Motor Housing
9.Fixing Screw A
10.Inner Pole
11.Fixing Screw B
12.Main Pole
13.Fan Base
14.Pole Nut
15.Safety Screw
Assembly
Carefully unpack to fan and remove all of
the packaging materials.
Pick out the fan base and pole parts (10 –
12) and remove the pole nut from the main
pole. Insert the main pole into the hole on
the top of the fan base and whilst holding it
in place, turn over to access underneath.
Lock the main pole into place by securing
with the pole nut. Tighten securely then
turn the assembly the right way up and sit
on a flat surface.
Release fixing screw B and pull the inner
pole out of the main pole. Adjust to a
favourable height, then tighten it with fixing
screw B.
Remove fixing screw A from the inner pole
and place the motor housing assembly on
top. Tighten with fixing screw A to secure
into place.
Remove the blade cap and guard knob
from the shaft of the motor housing.
Secure the rear grill onto the motor shaft,
using the 3 pins to align it, keeping the
carry handle at the top. Screw on the
guard knob to keep the rear grill in place
securely.
Push the fan blade onto the motor shaft
until fully seated and secure with the
blade cap.
Open the guard clips around the front grill
and put into position, to match up with the
rear grill. The hook on the front grill
should hook over the top of the rear grill.
Close all of the guard clips and tighten the
safety screw at the bottom of the guard.
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable
appliance.
WARNING Keep all objects at
least 1 metre from the front,
sides and rear of the appliance
Fan control switch
The control switch positions are:
•
0 = Off
•
1 = Low speed
•
2 = Medium Speed
•
3 = High Speed
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket,
making sure the speed control is in the off
position.
To operate the fan, turn speed control dial
clockwise until desired wind speed is
achieved.
Adjust tilt by tilting the fan head to the
desired wind direction (i.e. Either upward
or downward).
To activate the oscillation function, push
down the oscillation pin on the top of the
motor. The fan will then oscillate until the
pin is pulled back up.
IMPORTANT!
APPLIANCE!
NEVER
COVER
THIS
Cleaning
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the fan before cleaning.
Ensure that the fan is switched off from the
supply mains before removing the guard.
Use only a soft, damp cloth to gently wipe
the fan and dry well.
Do not immerse the fan in water and never
allow water to enter the motor housing.
Do not use harsh chemicals to clean the
fan.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
[email protected]
Two Year Warranty
Thank you for purchasing this Goldair Platinum product. Your product is warranted against faults and manufacture when
used in normal domestic use for a period of two years. In non-domestic use Goldair limits the voluntary warranty to three
months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during
the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by
anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in
relation to the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz
Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
Goldair Platinum Two Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase
Date of Purchase
Name Of Product
Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
">
