Product Overview Top view

Instruction Manual

Rear view Front view

1 2 SCROLL + / -

knob;

OK/SNOOZE

button

LEFT

button

3 4 STANDBY/ON

button

MENU

button

5 6 RIGHT

button

MUTE/EQ

button

7 8 ALARM

button

FAVO

button

9 SLEEP

button

10 VOLUME +/-

knob

11

Telescopic antenna

Remote control

12 DC IN

socket

13

Previous button

14 AUX IN 15

Next button

16

Headphone socket

17

Play/Pause button

18

LCD display

19

Stop button

20 EJECT

button

21

CD slot

22 23 24 25 Standby Menu

Previous

Alarm

setting

31 32 33 34 Mute

Next Play/Pause

Favo/Add

26 27 28 29 30 Up Left CD Prog.

Down Eject

Power connection

35 36 37 38 39 Right Enter/Snooze Vol + Vol Mode/EQ

Setting 1. Connect the power adaptor with the radio, and then connect the power adaptor to the mains socket. The unit is powered on. 2. Press

Standby

button to switch the unit to standby mode. To switch the unit off, press the

Standby

button and unplug the unit from the mains socket.

Network setting

Users encountering networking issues may find these options useful for diagnosing and fixing network problems. 1 Press

Menu

button and select

Configuration - Network,

press

OK/SNOOZE

button to confirm. 2 Turn

SCROLL + / -

knob to select your desired network setting option, and then press

OK/SNOOZE

button to confirm your setting.

Adjusting the volume

Use the

VOLUME + / -

knob or

Vol +

or

Vol-

buttons to increase or decrease the volume of the unit.

Date & Time Setting

1 The clock can be updated automatically if connected to the internet or received DAB/FM signals in your location. 2 To manually set the date and time, press

Menu

button and select

Configuration - Date & Time

.

SCROL

Internet Radio Mode

1 Press

Menu

button and select

Internet Radio

mode

– Skytune

,

Search (Skytune) or History.

Listen to DAB radio stations

1. 2. For initial use, press

Menu

button and select

Configuration – DAB Setup

, and then select

DAB Full Scan

to carry out a full scan and store stations list in memory. Press

Menu

button, use

OK

button scroll to

DAB Radio

mode, and press

OK

button, then turn

SCROLL + / -

knob to select your desired station in

DAB Station List

, press

OK/SNOOZE

button to confirm. Note: If you change your area, please repeat step 1 to enable DAB function. SCROLL

Listen to FM Radio stations

SCROLL 1. 2. For initial use, press

Menu

button and select

Configuration – FM Setup

, and then select

FM Full Scan

to search the FM radio stations. Press

Menu

button, use

OK

button scroll to

FM Radio

mode, and press

OK

button,, turn

SCROLL + / -

knob to select your desired station in

FM Station List,

press

OK/SNOOZE

button to confirm. Note: If you change your area, please repeat step 1 to enable FM function. SCROLL

My Favorite FM stations

Your radio can store up to 10 of your favorite FM stations. This will enable you to access your favorite stations quickly and easily. 1. While playing your favorite station, long press

Favo

button on the control panel to confirm. 2. Turn

SCROLL + / -

knob to select “YES” and then press

OK/SNOOZE

button to confirm.

CD Player mode

1 2 Press

Menu

button to select

CD Player

, then insert a CD. Press to play or pause the music. Press to play the next track, press to the previous track. Press to stop playing the music. 3 Press

Eject

button to eject the CD.

Media Centre

UPnP (Universal Plug and Play)

You can stream music from a networked device which supports UPnP function, allow sharing of the data and entertainment. For instance, most of the latest computer laptop supports UPnP, and you can stream the music from Windows Media Player application on the computer and Listen on your radio. If your PC is running Microsoft Windows XP, you can use Windows Media Player 11 (WMP11) to act as your UPnP (Universal Plug and Play) media server. (For Windows 7 or above, please download the correspond version of Windows Media Player). Windows Media Player 11 may be downloaded from Microsoft's website and install by following the instructions detailed in its installation wizard. Once installed, Windows Media Player 11 will create a library from all the media files available to it on your PC. To add new media files to the library, ENTER

File > Add to Library > Advanced Options

, Click ‘Add' and choose the files you wish to add and click ‘OK’. You will now need to connect your Internet radio to Windows Media Player 11 and configure it to allow the radio to access your media library. In order to this, you will need to do the following: 1 2 3 Press

Menu

button to select

Media Centre

, and then enter

UPnP

continue to display 'Empty list' if no UPnP servers are found. . Press

OK/SNOOZE

button to scan for all available UPnP servers. It may take a few seconds for the radio to complete its scan and before the scan has completed, the radio will display 'Scan for media server...'. The radio will After a successful scan. Access your UPnP server, turn

SCROLL + / -

knob to select your desired server, and then press

OK/SNOOZE

button to confirm ('Access Denied' will be displayed at this stage). Your PC will now prompt you that a device has attempted to connect to your UPnP server. In order to allow the radio to have access to the media files, you will need to click the 'Library' tab from Windows Media Player 11 and access the item to open the 'Media Sharing' window.

Access “Media Sharing” for Windows Media Player 11: 4 From the 'Media Sharing' windows, the radio will be listed as an unknown device. Click on the unknown device, and then click the 'Allow' button. Then click 'OK'. Allowing the unit to Connect. 5 Turn

SCROLL + / - knob

to select your desired music, and then press

OK/SNOOZE

button to display. Note: When you are playing the music under UPnP, you are able to change the mode of playback via accessing Media Player/Playback Mode.

AUX-in

1. 2. 3. Press

Menu

button to select

Aux-in

mode then press

OK

button to confirm. Connect one end of the 3.5mm line in cable into the port on the unit and insert the other end into your device. Choose your music from your device.

Bluetooth mode

1 Press

Menu

button until

Bluetooth

is selected. 2 3 From your Bluetooth device, search for available Bluetooth devices. Select "MIR-260" and connect.

Sleep timer

This feature enables your radio to switch to standby mode after a set sleep time. 1 Press

Sleep

button, Turn the

SCROLL + / -

knob to select from below options: Turn Off, 15, 30, 45, 60, 90, 120, 150 and 180 minutes. Press the

OK/SNOOZE

button to confirm the selected one. The sleep icon and sleep time will be shown on the display.

Alarm setting

Your radio includes dual alarms. Before setting an alarm, make sure to set the clock first. 1. Press the

ALARM

button to go to enable the alarm function. 2. Turn the

SCROLL + / -

knob to select "Alarm 1" or "Alarm 2", and then press the

OK/SNOOZE

button to confirm. 3. Turn the

SCROLL + / -

knob to select options (Time, Sound, Repeat, Alarm volume), and then press the

OK/SNOOZE

button to confirm the settings. 4. When an alarm rings, press

SNOOZE

button to stop the alarm. The alarm will sound again 9 minutes later. 5. When an alarm is stopped, press

ALARM

button, the alarm will sound again the next day at the same time.

Backlight Setting

This radio display has a backlight with adjustable brightness level. 1. Press the

Menu

button and select

Configuration - Dimmer,

then press the

OK/SNOOZE

button to confirm. 2. Turn the

SCROLL + / -

knob to select

Mode

or

Level

, and then press the

OK/SNOOZE

button to confirm. 3. Turn the

SCROLL + / -

knob to select backlight level, and then press the

OK/SNOOZE

button to confirm the setting.

Language setting

1. Press the

Menu

You can change the display language of your unit, there are 9 options available: German, English, Spanish, French, Italian, Dutch, Polish, Russian and Chinese. button and select

Configuration - Language

, press the

OK/SNOOZE

button to confirm. 2. Turn the

SCROLL + / -

knob to select your desired language, and then press the

OK/SNOOZE

button to confirm.

Factory reset

Doing a factory reset clears all user defined settings, replacing them with the original default values, so time/date, DAB station list and preset stations are all lost. 1. Press

Menu

button and select

Configuration - Reset to default

, press

OK/SNOOZE

button to confirm. 2. Turn

SCROLL + / -

knob to select “YES” and then press

OK/SNOOZE

button to confirm.

Technical specification

Item number: Power adaptor: Audio output: Frequency range: FM: DAB: MIR-260 100-240V ~ 50/60Hz 2 x 10W RMS 87.5 MHz to 108 MHz Band III, 174 MHz to 240 MHz

Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Hereby, Inter Sales A/S declares that the radio equipment type MIR-260 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the search ICON on topline of website. Write model number: MIR-260.

Now enter product page, and red directive is found under downloads/other downloads.

Operating Frequency Range: Max Output Power: DENVER ELECTRONICS A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.com/denverelectronics