advertisement
◉
Touch to zoom
BTL-50 Bluetooth Speaker Instruction Manual (Read before proceeding) Charging the Speaker The speaker works on an internal rechargeable lithium battery. Please charge your speaker fully before first use. Insert the small connector of the supplied micro-USB cable into the micro-USB charging port on the side of the speaker. Insert the large connector into the USB port on a computer, a USB charging device ,or 5V USB adapter(not included) and plug into a wall socket. The LED indicator will turn RED while charging and turn OFF when fully charged. Disconnect the USB cable when it is fully charged. Bluetooth Operation Slide the “POWER” switch to the ON position to power the speaker on. A tone will be heard and the speaker will enter Bluetooth pairing mode or re-pair to a previously-paired device. A tone will be heard and the Bluetooth LED indicator will quickly flash BLUE. Set your mobile device to search for Bluetooth devices, when it appears, select “BTL-50” from the list of found devices. You device will pair without a password but if required enter 0000 to finalise the pairing. Once successfully paired , a tone will be heard and the Bluetooth LED indicator will slowly flash Blue. Start playing music on your device. Keep your device within 10 meters of your speaker to ensure optimal audio quality. Turn the speaker off when not in use by flicking switch to the OFF position. Light Operation Quick press the [ modes in total. ] button to cycle through the speaker light modes. There are 4 LED Light Caution: This is not a toy. Please keep away from children. Please keep away from water / heat. Low power may cause poor connection even no working of Bluetooth. Do not overcharge the battery. Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project