DENVER
DENVER
<0
E
03-08
Smart Band
User Manuel
BFH-16 Black
WWW.DENVER-ELECTRONICS.COM
1 Quick start
1.1 Warning
Please consult your doctor before starting a new sport term. Smart bracelets
can monitor real-time dynamic heart rates, but it can’t be used for any medical
purpose.
1.2 Equipment requirements
Support Android 5.1, 10S8.0 Bluetooth 4.0 and above.
1.3 Charge
Please use the USB device to charge the bracelet before use to ensure that
the bracelet is fully charged. Remove the host from the wristband and plug it
into the USB charging dock to charge. The charging time is about 2 hours. To
ensure that the charging contact is good, please ensure that the metal contacts
are not dirty, oxidizing and impurities. When charging, the screen will display
the charging symbol. If the device is not used for a long time, please be sure to
replenish it every 3 months.
Bracelet body dismantling schematic Bracelet charging schematic
a. Unfasten the wristband buckle and select the touch key opposite side
b. Hold the bracelet body and pull two-side strap backwards, then will
remove the straps well.
c. Select the USB terminal of bracelet, and insert into USB port of laptop or
socket. (Full powered about 2 hours)
Long press the touch symbol for 3 seconds and the bracelet will boot.
Press and hold the touch area for more than 3 seconds at the MAC
screen, select "YES" or "NO" and select "YES". Press and hold the touch
ring to turn the phone off. Select "NO" to return to the main screen.
Please searchBFH-16 APP in the mobile software store and install or use
mobile phone to scan the QR code on the right to install APP.
3. Bracelet function interface
3.1 Bracelet parts schematic
Display area
Heart rate induction
Touch area
Touch function:
Power off state: long press the touch symbol and bracelet boot;
Power on state: Click the touch symbol and switch the main screen menu
interface. The interface is shown as follows.
‚ Мат Steps Distance Calorie blood Heart + Message
interface Р pressure rate 9
3.2 Introduction of raise bright screen interface function
When the bracelet is first paired with APP, it will
synchronize the time, date, and quantity of the
phone and display the symbol of the success of
the Bluetooth connection.
The main interface can be switched to another
menu interface for 2 seconds with the touch key,
and there are 2 kinds of interfaces in total.
Bluetooth connection symbol shows blue as connected.
3.3 Record, calorie and distance
The step interface can display the step.
Wear the Smart bracelet on the wrist.
When the user walks and the arm swings,
the bracelet will automatically record the
number of steps, walking distance and
calories consumption and other data.
3.4.Blood pressure, blood oxygen
Click on the touch area to switch to blood pressure,
blood oxygen interface, The bracelet will begin to te
st blood pressure, blood oxygen data
3,5 Heart rate monitoring
3.5.1 Touch the touch area to switch to the heart rate monitoring
interface. Bracelet support real-time dynamic monitoring of
heart rate to understand their own health data. In heart rate
monitoring, the duration of the bracelet will be reduced.
Ulnar joint
3.5.2 Please wear the bracelet correctly onyour “у,
wrist around 2CM inside the ulna joint as shown ( =
on the right. ss
3.5.3 When the heart rate is measured, the heart rate sensor is close to the skin
and is in good contact. If the wear is too loose and the light of the sensor is
exposed, the measured value will be inaccurate. Please do not look at the green
light of the sensor. It may cause discomfort in the eyes.
3.5.4 Although the product is used for real-time and dynamic detection of heart
rate, itis necessary to keep the body stopped and sit down when detecting heart
rate, otherwise it will prolong the time of heart rate measurement or can't
measure the data. The real-time dynamic heart rate data can be viewed when the
data is measured and then you can go to exercise.
3.5.5 If there is a big difference between the measured data, please take a rest to
measure again. The average of 5 times of continuous measurement will be
more accurate.
3.5.6 This product is a real-time dynamic heart rate measurement, so the heart rate
varies in the state of speaking, eating, drinking and so on. Please be practical.
3.5.7 Make sure there is no dirt on the bottom of the heart rate sensor during
measurement. Skin color, hair density, tattoos and scars may affect the test result.
3.5.8 The heart rate measuring device is based on the principle of PPG
measurement, so the accuracy of data may appear errors depending on the
physiological factors that affect the light absorption and reflection (blood
circulation, blood pressure, skin condition, blood vessel location and density, etc. ).
If the measurement is inaccurate for the abnormal high or low data, please
measure it again.
3.5.9 The bracelet may get hot when you wear it for long time. If you feel not well,
please take it off and then wear it until the device get cool.
3.5.10 Cold weather will affect your measurements. Please
measure itin warm conditions.
3.6 Information
Switch to the information interface. Click the touch area for 3 seconds to enter the
information content, single-touch will switch to the next content. The content
contains the information sent by the call and chat software. The information
can be stored 7 at most. After the number of messages reaches seven, the
previously displayed messages are replaced one by one.
3.7 More features
3.7.1 MAC
MAC address, used to indicate the hardware address of the wristband, is the
unique identifier of the wristband. MAC address can't be modified. When using
a cell phone to find a bracelet, just look at the last 4 digits of the MAC to find the
corresponding bracelet. The role is to quickly identify the bracelet and connect
the phone.
3.7.2 Shut down
Press and hold the touch area for more than 3 seconds at the MAC
screen, select "YES" or "NO" and select "YES". Press and hold the touch
ring to turn the phone off. Select "NO" to return to the main screen.
3.7.3 Back to
In the step count, calories, mileage, heart rate, blood pressure,
blood oxygen, find the mobile phone icon interface,
long press the touch button for 3 seconds can return to the main interface
4. Phone connection bracelet
Please follow the steps below:
4.1 Download App. Before using, please installBFH-16 software.
4.2 Registered users. For the first time, the App will first enter the landing interface,
and click the registration icon in the upper right corner of the landing interface
to enter the registration interface. Enter the account, mailbox, password and
other information, click on the registration. Please login with the registered
account. Only when the account is landed, all the information of the movement
can be recorded and saved. Itis suggested not to enter freely. It is recommended
to use your own real information, so that the password can be retrieved when
you forget the password later.
4.3 When Android and IOS bind to the device, first click the settings button on the
lower right part of the page to enter the setup page, then click the top binding
device to enter the binding device page, and click the search button icon at the
top of the page to search the device. When the device is found, click the device
in the list to connect with the device's MAC address. After the binding is
successful, there will be an already bound device in the "currently bound device"
column. The screenshot of the interface is as follows:
EO EY TRIE Te RR el. [RY LEY um)
< Binding Equipment Bluetooth Pairing Request
“LC-115P-E474” would liketo
Connected Device pair with your iphone
LC-115P-E474 e
03:44:6F-FA:6A:ED _ Cancel Pair
All Devices
Note: if the 10S is connected to a hand loop, a Bluetooth pairing request will be
popped out. Click "pair" and the handset can be connected to the phone normally.
4.4. setting. Click the message prompt, T Я
enter the notification center, find
the BFH-16 device message.
notification, and choose to open it. dhe e
If the phone is restarted and
received no message push, please Phone call XD
reopen this switch.
SMS message J
Facebook message Ke
5. Backstage lock
In addition to manually removing the background program manually, the [0S
system does not require a specific set of lock-in backstage. Because the
Android system mechanism will automatically clean up the process, you need
to lock the APP backstage manually. Because of the different brands of different
settings, the following is to refer to a brand of mobile phone software to set up.
As follows:
5.1 Open APP and click the middle one to return to the main interface.
5.2 Click the button to call up the task in the near future task management interface
(usually it's the menu button, also there is a long press button to call up the
desktop), which runs as a background application management interface.
5.3 Hold the locked APP application icon and lock it down. At this time the
application icon will have a lock sign in the upper right corner of the icon to
indicate the success of the lock. Or after pulling down, clicking on the lock
task in the upper left corner indicates the success of the lock.
5.4 After locking, it is impossible to clean up the application with a back-end
one - key cleaning function, and it represents APP has been locked successfully.
6. APP function introduction
6.1 Open APP. First, go into my state and click on the icons on the interface to see
the current values of the movements and the sleep data.
6.2 Sleep tracking. This interface is used to see the detailed data and icon statistics
of your historical sleep. Click on the switch arrow above to switch to different
dates to view historical records. During sleep, each person's sleep time and
the turn of the body's wrist after sleep will directly affect the monitoring of the
sleep time.
6.3 Motion tracking. This interface is used to view the detailed data and icon
statistics of your historical movement. Click the switch arrow above to switch
to a different date to view the history. The data include total step, total distance,
total calorie, heart rate data (only the product with heart rate).
As shown in the following picture:
2017-12-11
< Mon
2017-12-07
m
180
1 121
pr a
Taryel:+535tep
comple en Tcies, completo 09%
® 29 | ® ооо) 78.3,
02:01 809
@ mem ame MO0300 81
04:00 65.2
6.4 Statistics. You can view the history of exercise steps and sleep record of the
corresponding icon charts on a monthly or weekly basis.
6.5 Function settings. Set the Setting O
various functional
parameters of the device.
(@ Binding device
As shown on the right picture:
O Download data from server
®) Wechat Authentication
(9) Target step
{ я
пр Sedentary remind
я 1
a Device alarm
6.6 More functional settings. Please click "my status" interface, "question" on the
right, and choose "browser open”. There will be a detailed description in it.
7. Other functions
7.1 Notification
Including call notification, SMS, QQ, WeChat, Facebook, Twitter, What's APP
and other news push (For example: open the incoming call notification in the
App setting. When the mobile phone receives the incoming call, smart bracelet
will vibrate brightly and display the caller contact).
7.2 “Do not disturb” mode
Turn on the Do not disturb mode, device vibration reminder and message push
reminder function, but the alarm vibration. Function will still working.
7.3 Sedentary reminder
Set the sedentary time interval (minutes), click Finish, then open sedentary
reminder mode. When the sedentary time arrives, the bracelet will be bright,
the screen will vibration and the reminding icon will flick.
7.4 Alarm reminder
Inthe APP BFH-16 Click "Settings - Device Alarm" to enter the alarm setting
reminder and set the alarm time. When the time comes, the bracelet will prompt:
the alarm icon will swing and vibrate.
7.5 Bluetooth camera
Click on the contact button or shake the wristband to take a remote
control shot. Long press on the touchpad to return to the main interface.
7.6 Call rejected
When the phone calls, the incoming message will be sent to the handset
synchronously. If you don't want to answer it, you can hang it by clicking on the touch
of the hand ring.
7.7 Unbinding Equipment
Click on the binding device. Android can disconnect with the mobile phone only
by clicking on the selected device model. When 10S is disconnected, you also need
to set - -- Bluetooth, click on the right Bluetooth, and choose to ignore the device.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
DENVER"
www.denver-electronics.com
CE
Electric and electronic equipment and included batteries contains materials, components and
substances that can be hazardous to your health and the environment, if the waste material
(discarded electric and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen
below. This symbol signifies that electric and electronic equipment and batteries should not be
disposed of with other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the approriate and designated
facility. In this manner you make sure that the batteries are recycled in accordance with legislature and
will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can
either be submitted free of charge at recycling stations and other collection sites, or be collected from
the households. Additional information is available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type BFH16 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: www.denver-electronics.com and then click the search ICON on topline of website. Write
modelnumber: BFH-16 Now enter product page, and red directive is found under downloads/other
downloads
Operating Frequency Range:2412-2484 MHZ
Max Output Power:0.28W
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook
">
