HealthRider HRIVEX75014 User manual

HealthRider HRIVEX75014 User manual
Model No. HRIVEX75014.0
Serial No. : ___________
USERʼS MANUAL
Serial No Decal
Write the serial number in the
space above for reference.
QUESTIONS ?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website
www.iconsupport.eu
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO OPERATE THE BIKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HOW TO MEASURE YOUR PULSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . 9
CONSOLE FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MAINTENANCE AND TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
EXPLODED DRAWINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last page
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the
warning decal(s). If a decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a free
replacement decal. Apply the decal in the
location shown.
Note: The decal(s) may not be shown at
actual size.
ENGLISH
115 Kg
2
115 Kg
IMPORTANT PRECAUTIONS
WARNING :
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your bike before using it. ICON assumes no
responsibility for personal injury or property damage sustained by or through the use of this
product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or
persons with pre-existing health problems.
2. Use this bike only as described in this
manual.
7. Keep children under age 12 and pets away
from the bike at all times.
8.The bike should not be used by persons
weighing more than 250 lbs. (115 kg).
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
3. It is the responsibility of the owner to ensure caught on the bike. Always wear athletic
that all users of the bike are adequately
shoes for foot protection while exercising.
informed of all precautions.
10. Hold the handlebars or the upper body arms
when mounting, dismounting, or using the
4. The bike is intended for home use only.
bike.
Do not use the bike in a commercial,
rental, or institutional setting.
11. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
5. Keep the bike indoors, away from
heart rate readings. The pulse sensor is
moisture and dust. Place the bike on a
intended only as an exercise aid in
level surface, with a mat beneath it to protect
determining heart rate trends in general.
the floor or carpet. Make sure that there is at
least 3 ft. (0.9 m) of clearance in the front and
12. Keep your back straight while using the
rear of the bike and 2 ft. (0.6 m) on each
bike; do not arch your back.
side.
6. Inspect and properly tighten all parts
regularly. Replace any worn parts
immediately.
13. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
3
BEFORE YOU BEGIN
this manual. To help us assist you, note the product model
number and serial number before contacting us.
The model number is HRIVEX75014.0 and the location of the serial number decal are shown on the
front cover of this manual.
Thank you for purchasing the HealthRider® R
3200 T. The bike provides an array of features designed to make your workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before you use the bike. If you have questions after
reading this manual, please see the front cover of
4
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver an adjustablewrench.
and
As you assemble the exercice bike, use the drawings below to identify small parts. The number in
parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it has been preassembled.
NO 19*1
NO 9*2 NO 71*2
NO 24*4
NO 26*6
NO 25*6
NO 70*2
NO 20*1
NO 11*1
NO 44*4
NO:73*1
NO:72*1
5
STEP 1
1. Attach the front stabilizer (68) onto the Main
Frame (69) with 2 Carriage Bolts (44).
2. Attach the Rear Stabilizer (43) onto the Main
Frame (69) with 2 Carriage Bolts (44).
68
43
44
31
STEP 2
1. Screw the right Pedal (31R) into the right
pedal crank. (NOTE: The screw direction is
clockwise).
2. Screw the left Pedal (31L) onto the left pedal
crank. (NOTE: The screw direction is anti-clockwise).
STEP 3
10
1. Put the Handlebar Post (12) into the
Main frame (69) through computer rack
(10) and front plastic cover (60).Connect
The upper computer cable (27) and the lower
Computer cable (28)
60
24
25
26
27
28
Fit the Allen Bolt (26),spring washer (25)
Washer (24) and curved washers (70)
and align handlebar post so it is straight.
Then tighten the Allen bolts fully.
6
12
70
44
STEP 4
13
14
15
16
1. Attach the Seat Support (21) onto the
Main Frame (69) with Knob .
2. Attach the Saddle (13) onto the Sliding
set (14).
19
20
21
STEP 5
Attach the Handlebar (3) onto Handlebar Post
(12) with 2 Screw(9) and 2 screws (71). Tighten fully.
9
3
(NOTE: Please Keep the Hand Pulse Cable
outside.)
71
7
1
STEP 6
Connect the Upper Computer Cable and two
hand pulse cable (6) with the cable on the back
of computer (1).Sit the computer (1) onto its
bracket and secure in place using the 4 screws.
STEP 7
Secure plastic cover (10) onto the handlebar
post with 4 screw(8),then buckle on the other.
10
8
STEP 8
Attach the computer rack (10) onto Handlebar
(3) with Knob (11). Tighten fully.
11
Now, your machine is ready for use.
8
10
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE HEIGHT AND THE LATERAL
POSITION OF THE SEAT
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal straps, first pull the ends of the
pedal straps off the tabs on the pedals.
Adjust the pedal
straps to the desired
Pedal
position, and then
press the ends of the
Strap
pedal straps onto the
tabs.
For effective exercise,
the seat should be at the
proper height. As you
pedal, there should be a
slight bend in your knees
when the pedals are in
the lowest position. To
adjust the height of the
seat, first loosen the seat
post knob. Next, pull the
knob, slide the seat post
upward or downward to the desired position, and
then release the knob. Move the seat post upward
or downward slightly to make sure that the knob is
engaged in one of the adjustment holes in the seat
post. Then, tighten the knob.
To adjust the lateral position of the seat, first loosen
the seat knob a few turns. Then, move the seat
forward or backward to the desired position, and
firmly tighten the seat knob
HOW TO ADJUST THE ANGLE OF THE
HANDLEBAR
To adjust the angle
of the handlebar,
loosen the pivot handle,
rotate the handlebar
to the desired
angle, and then
Knob
retighten the pivot
handle.
HOW TO MESURE YOUR HEART RATE
Measure your heart rate if desired.
on the handgrip pulse sensor, remove the plastic.
In addition, make sure that your hands are clean.
To measure your heart rate, hold the handgrip pulse
sensor with your palms resting against the metal
contacts. Avoid moving your hands or gripping the
contacts tightly.
When your pulse is detected, your heart rate will
be shown in the display. For the most accurate
heart rate reading, hold the contacts for at least 15
seconds.
If your heart rate is not shown, make sure that
your hands are positioned as described.
Be careful not to move your hands excessively or to
squeeze the metal contacts tightly. For optimal
performance, clean the metal contacts using a soft
cloth; never use alcohol, abrasives, or chemicals
to clean the contacts.
You can measure you heart rate using the handgrip
pulse sensor.
If there are sheets of plastic on the metal contacts
Contact
9
CONSOLE DIAGRAM
MAKE YOUR FITNESS GOALS A REALITY WITH
IFIT.COM
Upload your workout results to the iFit cloud
and track your accomplishments.
With your new iFit-compatible fitness equipment, you
can use an array of features on iFit.com to make your
fitness goals a reality:
Set calorie, time, or distance goals for your
workouts.
Exercise anywhere in the world with
customizable Google Maps.
Choose and download sets of weight-loss
workouts.
Download training workouts designed to
Juicy Go to iFit.com to learn more.
help you reach your personal goals.
ELNE77914V1
Measure your progress by competing
against other users in the iFit community.NTEVEL77914
10
FEATURES OF THE CONSOLE
buttons or by pressing one of the numbered
Resistance buttons.
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
Note: After you press a button, it will take a moment
for the pedals to reach the selected resistance level.
When you use the manual mode, you can change the
resistance of the pedals with the touch of a button. While
you exercise, the console will display continuous exercise
feedback. You can also measure your heart rate using
the handgrip heart rate monitor or the optional chest heart
rate monitor (see page 21 for information about the
optional chest heart rate monitor).
4. Follow your progress with the display.
The display can show the following workout
information:
The console also offers a selection of onboard workouts.
Each workout automatically changes the resistance of the
pedals as it guides you through an effective workout. You
can also set a calorie, distance, or time goal.
The console also features an iFit mode that enables
the console to communicate with your wireless network
through an optional iFit module. With the iFit mode, you
can download personalized workouts, create your own
workouts, track your workout results, race against other
iFit users, and access many other features. To purchase
an iFit module at any time, go to www.iFit.com or
call the telephone number on the front cover of this
manual.
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
To use the manual mode, see page 15. To use an
onboard workout, see page 18. To use a set-a-goal
workout, see page 19. To use an iFit workout, see
page 20. To use the sound system, see page 21. To
change console settings, see page 22.
Note: If there is a sheet of plastic on the display, remove
the plastic.
HOW TO USE THE MANUAL MODE
1.Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Select the manual mode.
Press the Home button or press either the Speed
button or the Calorie button repeatedly to select the
manual mode.
If a wireless iFit module is not inserted into the console and connected to iFit, the manual mode will be
selected automatically.
Calories (Cals.)—This display mode will show the
approximate number of calories you have burned.
Calories per Hour (Cals./Hr)—This display mode
will show the approximate number of calories you are
burning per hour.
Distance (Dist.)—This display mode will show the
distance that you have pedaled in miles or kilometers.
Pulse—This display mode will show your heart rate
when you use the handgrip heart rate monitor or the
optional chest heart rate monitor (see step 5).
esistance (Resist.)—This display mode will show
R
the resistance level of the pedals for a few seconds
each time the resistance level changes.
RPM—This display mode will show your pedaling
speed in revolutions per minute (rpm).
Stride—This display mode will show the total number
of strides you have pedaled.
Time—When the manual mode is selected, this
display mode will show the elapsed time. When a
workout is selected, this display mode will show the
time remaining in the workout.
The matrix offers several display tabs. Press the
Display button repeatedly until the desired tab is
shown. You can also press the increase and decrease
buttons next to the Enter button.
Speed—This tab will show a profile of the speed settings of the workout. A new segment will appear at the
end of each minute.
y Trail—This tab will show a track that represents
M
1/4 mile (400 m). As you exercise, the flashing rectangle will show your progress. The My Trail tab will
also show the number of laps you complete.
3.Change the resistance of the pedals as desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
11
Calorie—This tab will show the approximate amount
of calories you have burned. The height of each segment represents the amount of calories burned during
that segment.
shown. For the most accurate heart rate reading,
hold the contacts for at least 15 seconds.
If the display does not show your heart rate, make
sure that your hands are positioned as described.
Be careful not to move your hands excessively or
to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never
use alcohol, abrasives, or chemicals to clean the
contacts.
As you exercise, the workout intensity level bar
will indicate the approximate intensity level of your
exercise.
6.When you are finished exercising, the console
will turn off automatically.
Press the Home button to exit the workout and return
to the default menu (see HOW TO CHANGE
CONSOLE SETTINGS on page 22 to set the
default menu). If necessary, press the Home button again.
If the pedals do not move for several seconds, a
series of tones will sound, the console will pause, and
the time will flash in the display.
If the pedals do not move for several minutes, the
console will turn off and the display will be reset.
When a wireless iFit module is
connected, the wireless symbol at the top of the display will
show the strength of your wireless signal. Four arcs indicate
full signal strength.
Change the volume level
the console by pressing the
volume increase and decrease
buttons.
Note: The console features a display demo mode,
designed to be used if the elliptical is displayed in a
store. When the demo mode is turned on, the console will show a preset presentation. To turn off the
demo mode, see HOW TO CHANGE CONSOLE
SETTINGS on page 22.
of
HOW TO USE AN ONBOARD WORKOUT
1.Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
5. Measure your heart rate if desired.
You can measure your heart rate using either the
handgrip heart rate monitor or an optional chest heart
rate monitor (see page 21 for information about the
optional chest heart rate monitor).
2. Select an onboard workout.
To select an onboard workout, press the Speed button or the Calorie button repeatedly until the desired
workout appears in the display.
Note: If you use both heart rate monitors at the
same time, the console will not display your heart
rate accurately.
If there are sheets of plastic on the metal contacts
on the handgrip heart rate monitor, remove the
plastic. To measure your heart rate, hold the handgrip heart rate monitor with your palms resting against
the contacts. Avoid moving your hands or gripping
the contacts tightly.
Contacts
When your pulse is detected, a heart symbol will flash
in the display each time your heart beats, one or two
dashes will appear, and then your heart rate will be
When you select an onboard workout, the display will
show the duration of the workout and the name of the
workout. A profile of the speed settings of the workout
will appear in the matrix.
The display will also show the maximum pedaling
speed (rpm) and the maximum resistance level.
3. Begin pedaling to start the workout.
Each workout is divided into one-minute segments.
One resistance level and one target rpm (speed)
are programmed for each segment. Note: The same
resistance level and/or target rpm may be programmed for consecutive segments.
The resistance level and the target rpm for the first
segment will appear in the matrix.
During the workout, the profile
on the speed tab
will show your
progress. The
flashing segment
12
Profile
of the profile represents the current segment of the
workout. The height of the flashing segment indicates
the target rpm for the current segment.
Next, press the increase and decrease buttons next
to the Enter button until the name of the desired goal
appears in the display. Then, press the Enter button.
t the end of each segment of the workout, a series
A
of tones will sound and the next segment of the profile
will begin to flash. If a different resistance level and/or
target rpm is programmed for the next segment, the
resistance level and/or target rpm will appear in the
display for a few seconds to alert you. The resistance
of the pedals will then change.
Then, press the increase and decrease buttons next
to the Enter button to set the desired goal.
As you exercise, you will be prompted to keep your
pedaling speed near the target rpm for the current
segment. When an upward-pointing arrow appears
in the display, increase your pace. When a downward-pointing arrow appears, decrease your pace.
When no arrow appears, maintain your current
pace.
3. Begin pedaling to start the workout.
Each workout is divided into one-minute segments.
You can manually change the resistance of the pedals as desired during the workout by pressing the
Resistance buttons.
Note: If you manually change the resistance level during a calorie goal workout, the length of the workout
may adjust automatically to ensure that you meet
your calorie goal.
IMPORTANT: The target rpm is intended only to
provide motivation. Your actual pedaling speed
may be slower than the target rpm. Make sure to
pedal at a speed that is comfortable for you.
.Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that you
burn will depend on various factors such as your
weight. In addition, if you manually change the
resistance level during the workout, the number
of calories you burn will be affected.
If the resistance level for the current segment is too
high or too low, you can manually override the setting
by pressing the Resistance buttons. IMPORTANT:
When the current segment of the workout ends,
the pedals will automatically adjust to the resistance level programmed for the next segment.
The workout will continue in this way until the calorie,
distance, or time goal is reached. To pause the workout, stop pedaling. The time will pause in the display.
To resume the workout, simply resume pedaling.
The workout will continue in this way until the last
segment ends. To stop the workout at any time, stop
pedaling. The time will flash in the display. To resume
the workout, simply resume pedaling.
4. Follow your progress with the display.
As you exercise, the calories, time, or distance display will count down until the desired goal is reached.
4. Follow your progress with the display.
See step 4 on page 15.
See step 4 on page 15.
5. Measure your heart rate if desired.
5. Measure your heart rate if desired.
See step 5 on page 16.
See step 5 on page 16.
6.When you are finished exercising, the console
will turn off automatically.
6.When you are finished exercising, the console
will turn off automatically.
See step 6 on page 17.
See step 6 on page 17.
HOW TO USE A SET-A-GOAL WORKOUT
Press the Map button, the Train button, or the Lose
Wt. button to download the next workout of that type
in your schedule.
1.Begin pedaling or press any button on the
console to turn on the console.
Press the Compete button to compete in a race that
you have previously scheduled.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Set a calorie, distance, or time goal.
Press the Track button to re-run a recent iFit workout
from your schedule. Next, press the increase and
decrease buttons to select the desired workout. Then,
press the Enter button to start the workout.
To set a calories, distance, or time goal, first press the
Set A Goal button.
To use a set-a-goal workout, press the Set A Goal
button (see page 19).
13
HOW TO USE AN IFIT WORKOUT
You must have an iFit module to use an iFit workout. To
purchase an iFit module at any time, go to www.iFit.
com or call the telephone number on the front cover
of this manual.
Note: To use an iFit module, you must have access to a
computer with an internet connection and a USB port.
You will also need an iFit.com membership. To use a
wireless iFit module, you must also have your own wireless network including an 802.11b/g/n router with SSID
broadcast enabled (hidden networks are not supported).
1.Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2.Insert the iFit module into the console.
To use an iFit workout, make sure that the iFit module
is inserted in the console.
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in the
iFit module must be at least 8 in. (20 cm) from all
persons and must not be near or connected to
any other antenna or transmitter.
3. Select a user.
If more than one user is registered on your iFit
account, you can switch users in the iFit main screen.
Press the increase and decrease buttons next to the
Enter button to select a user.
4. Select an iFit workout.
To select an iFit workout, press one of the iFit buttons. Before some workouts will download, you must
add them to your schedule on www.iFit.com.
When you select an iFit workout, the display will show
the duration of the workout and the approximate
number of calories you will burn. The display may
also show the name of the workout. If you select a
competition workout, the display may count down to
the beginning of the race.
Note: The iFit buttons may also run demo workouts.
To use the demo workouts, remove the iFit module
from the console and press one of the iFit buttons.
5. Start the workout.
See step 3 on page 18.
During some workouts, an audio coach will guide you
through your workout. You can select a setting for
the audio coach (see HOW TO CHANGE CONSOLE
SETTINGS on page 22). To stop the workout at any
time, stop pedaling.The time will flash in the display.
To resume the workout, simply resume pedaling.
6. Follow your progress with the display.
See step 4 on page 15.
The My Trail tab will show a map of the trail or it will
show a track and the number of laps you complete.
During a competition workout, the Compete tab will
show your progress in the race. As you race, the
top line in the matrix will show how much of the race
you have completed. The other lines will show other
competitors. The end of the matrix represents the end
of the race.
7. Measure your heart rate if desired.
See step 5 on page 16.
8.When you are finished exercising, the console
will turn off automatically.
See step 6 on page 17.
Press the Map button, the Train button, or the Lose
Wt. button to download the next workout of that type
in your schedule.
For more information about the iFit mode, go to
www.iFit.com.
Press the Compete button to compete in a race that
you have previously scheduled.
HOW TO USE THE SOUND SYSTEM
Press the Track button to re-run a recent iFit workout
from your schedule. Next, press the increase and
decrease buttons to select the desired workout. Then,
press the Enter button to start the workout.
To use a set-a-goal workout, press the Set A Goal
button (see page 19).
For more information about the iFit workouts,
please see www.iFit.com.
To play music or audio books through the console sound
system while you exercise, plug a 3.5 mm male to 3.5
mm male audio cable (not included) into the jack on the
console and into a jack on your MP3 player, CD player, or
other personal audio player; make sure that the audio
cable is fully plugged in. Note: To purchase an audio
cable, see your local electronics store.
Next, press the play button on your
personal audio player. Adjust the volume
level using the volume increase and
14
decrease buttons on the console or the volume control on
your personal audio player.
THE OPTIONAL CHEST HEART RATE MONITOR
Whether your goal
is to burn fat or to
strengthen your
cardiovascular
system, the key to
achieving the best
results is to maintain the proper
heart rate during
your workouts.
The optional chest
heart rate monitor will enable you to continuously monitor
your heart rate while you exercise, helping you to reach
your personal fitness goals. To purchase a chest heart
rate monitor and receiver, please see the front cover
of this manual.
HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
To select the settings mode, press and hold the
Settings button until the settings information appears
in the display.
The display will show the total number of hours that
the elliptical has been used and the total distance (in
miles or kilometers) that has been pedaled on the
elliptical.
If an iFit module is connected to the console, the
display will show the words WIFI MODULE or USB
MODULE.
If no module is connected, the display will show the
words NO IFIT MODULE. If no module is connected,
some of the settings options will not be available.
2. Navigate the settings mode.
While the settings mode is selected, the matrix of the
display will display several optional screens. Press
the decrease button next to the Enter button repeatedly to select the desired optional screen.
The lower section of the display will show instructions for the selected screen. Make sure to follow
the instructions shown in the lower part of the
display.
Demo—The console features a display demo mode,
designed to be used if the elliptical is displayed in a
store. Press the Enter button repeatedly to turn the
demo mode ON or OFF.
Contrast Level—The currently selected contrast
level will appear in the display. Press the Resistance
increase and decrease buttons to adjust the contrast
level.
Trainer Voice—The currently selected setting for
the audio coach will appear in the display. Press the
Enter button repeatedly to turn the audio coach ON or
OFF.
Default Menu—The default menu will appear when
you press the Home button. Press the Enter button repeatedly to select the manual mode or the iFit
menu as the default menu.
Check Status—The words CHECK WIFI STATUS
or CHECK USB STATUS will appear in the display.
Press the Enter button. After a few seconds, the status of the iFit module will appear in the display. To exit
this display, press the Settings button.
Send/Receive—The words SEND/RECEIVE DATA
will appear in the display. Press the Enter button. The
console will then check for iFit workouts and firmware
downloads.
4. Exit the settings mode.
Press the Settings button to exit the settings mode.
HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
To select the settings mode, press and hold the
Settings button until the settings information appears
in the display.
The display will show the total number of hours that
the elliptical has been used and the total distance (in
miles or kilometers) that has been pedaled on the
elliptical.
If an iFit module is connected to the console, the
display will show the words WIFI MODULE or USB
MODULE.
If no module is connected, the display will show the
words NO IFIT MODULE. If no module is connected,
some of the settings options will not be available.
3. Change settings as desired.
2. Navigate the settings mode.
Units—The currently selected unit of measurement
will appear in the display. To change the unit of measurement, press the Enter button repeatedly. To view
distance in miles, select ENGLISH. To view distance
in kilometers, select METRIC.
While the settings mode is selected, the matrix of the
display will display several optional screens. Press
the decrease button next to the Enter button repeatedly to select the desired optional screen.
15
The lower section of the display will show instructions for the selected screen. Make sure to follow
the instructions shown in the lower part of the
display.
3. Change settings as desired.
Units—The currently selected unit of measurement
will appear in the display. To change the unit of measurement, press the Enter button repeatedly. To view
distance in miles, select ENGLISH. To view distance
in kilometers, select METRIC.
Demo—The console features a display demo mode,
designed to be used if the elliptical is displayed in a
store. Press the Enter button repeatedly to turn the
demo mode ON or OFF.
Contrast Level—The currently selected contrast
level will appear in the display. Press the Resistance
increase and decrease buttons to adjust the contrast
level.
Enter button repeatedly to turn the audio coach ON or
OFF.
Default Menu—The default menu will appear when
you press the Home button. Press the Enter button repeatedly to select the manual mode or the iFit
menu as the default menu.
Check Status—The words CHECK WIFI STATUS
or CHECK USB STATUS will appear in the display.
Press the Enter button. After a few seconds, the status of the iFit module will appear in the display. To exit
this display, press the Settings button.
Send/Receive—The words SEND/RECEIVE DATA
will appear in the display. Press the Enter button. The
console will then check for iFit workouts and firmware
downloads.
4. Exit the settings mode.
Press the Settings button to exit the settings mode.
Trainer Voice—The currently selected setting for
the audio coach will appear in the display. Press the
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise bike
regularly.
Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild soap.
IMPORTANT: To avoid damage to the console,
keep liquids away from the console and keep the
console out of direct sunlight.
16
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body
begin to use stored fat calories for energy. If your
goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in
your training one. For maximum fat burning, exercise
with your heart rate near the middle number in your
training zone.
WARNING:
Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35
or persons with pre-existing health problems.
The pulse sensor is not a medical device. Various factors may affect the accuracy of heart
rate readings. The pulse sensor is intended
only as an exercise aid in determining heart
rate trends in general.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use
your heart rate as a guide to find the proper intensity
level. The chart below shows recommended heart
rates for fat burning and aerobic exercise.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
WORKOUT GUIDELINES
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation for exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
he first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as
you exercise–never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of
stretching. Stretching increases the flexibility of your
muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is
the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
17
34
35
30
31
32
42
33
30
43
13
14
15
16
17
18
18
44
33
38
41
37
40
36
39
19
20
45
48
49
50
47
51
24
25
26
27
28
52
5 4
38
29 30
46
21
22
23
8
9
10
11
12
6
53
2
54
65
69
66
3
51
55
36
70
71
1
56
64
63
61
67
62
68
74
73
72
60
57
58
59
EXPLODED DRAWING—Model No. HRIVEX75014.0
PART LIST—Model No. HRIVEX75014.0
Item Qty. Description
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
1
2
1
2
2
2
4
2
1
1
1
1
1
3
3
1
2
1
1
1
1
1
4
6
6
1
1
1
9
1
1
6
1
1
2
2
4
Item Qty. Description
Computer
End Cap Φ22
handlebar
Self- tapping screw M4*15
Hand pulse cable
Hand pulse pads
Screw M4.2*25
Allen bolt M8*15
computer rack
Quick pin M16*27
Handlebar Post
Saddle
Seat Gliding Set
Washer Ф8*Ф16*1.5T
Nylon nut M8
Small triangles pieces of welding
End Cap 38*38
Washer Ф10*Ф25*3T
Knob M10
Seat post
Inner plastic cover Φ50
Quick Pin
Washer Ф8*Ф19*1.5T
Spring Ф8
Allen Bolt M8*20
Upper computer cable
Lower computer cable
Sensor
Drill Screw M5*15
Pedal L+R
Crank L+R
Drill Screw M5*20
Plastic Cover
Chain Cover L+R
C-Sharp Clip Ф15
Washer Ф17*Ф22*1.0T
Bearing
19
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
2
2
1
2
1
4
1
1
1
1
1
1
2
1
1
1
1
1
5
2
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
2
1
1
3
1
1
1
2
2
1
1
2
2
1
1
1
Axle Cap
Washer surface outside hexagonal screw
Main adaptor socket & lead 650MM
Real End Cap
Real stabilizer
Allen Bolt M8*55
Motor
Wire 400mm
Fly Wheel Ф280*125
Nylon nut M8
Washer Ф8*Ф16*1.5T
Nylon nut M10
Washer Ф10*Ф19*1.5T
Tube Spacer Ф10*Ф17*25mm
Oppress Pole
Spring 2.0*28
Carriage Bolt M8*20
Carriage Bolt M10*40
Self- tapping screw M4.5*25
Washer surface outside hexagonal screw
M8*25
Cover Crank
Plastic Cover
Belt 420J6
Allen Bolt M8*12
Arbor Welding Ф17*170mm
Belt Wheel Φ260 J6
Curved Washer Ф17.5*Ф22*0.5T
Washer Ф17*Ф22*1.0T
Front End Cap
Front stabilizer
Main Frame
Curved washer Φ8*Ф19*1.5T
Screw Φ10*79
Combination wrench
Allen key wrench
Adaptor
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
IMPORTANT RECYCLING INFORMATION FOR E. U. CUSTOMERS
This electronic product must not be disposed of in municipal waste. To preserve
the environment, this product must be recycled after its useful life as required by
law. Please use recycling facilities that are authorized to collect this type of waste in
your area. In doing so, you will help to conserve natural resources and improve
European standards of environmental protection. If you require more information about
safe and correct disposal methods, please contact your local city office or the
establishment where you purchased this product.
SPECIFICATION :
Open Dimension : (L x l x h):116*60*146 cm
Product Weight : 34 Kg
Ref : M01123
Print in China © 2014 Icon Health & Fitness, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement