Bush 40 INCH UHD SMART TV Quick Start Guide

Bush 40 INCH UHD SMART TV Quick Start Guide
5
Using your TV for the first time
Let’s get started
Electronic Programme Guide
Now/Next Schedule
By means of electronic programme guide
function of your TV you can browse the event
schedule of the currently installed channels
on your channel list. It depends on the related
broadcast whether this feature is supported or not.
To access the programme guide, press the Guide
button on your remote. You can also use the
Guide option under TV menu.
There are 2 different types of schedule layouts
available, Timeline Schedule and Now/Next. To
switch between these layouts highlight the tab
with the name of the alternative layout on the
upper side of the screen and press OK.
Use the directional buttons to navigate through
the programme guide. Use the Back/Return
button to use the tab options on the upper side
of the screen.
In this layout option, only the current and next
events of the listed channels will be displayed. You
can use the directional buttons to scroll through
the list of the events.
Press Back/Return button to use available tab
options. Highlight Filter tab and press OK to
see the filtering options. To change the layout
highlight Timeline Schedule and press OK.
Timeline Schedule
Contact:
www.bush-support.com
Helpline: 0345 604 0105
In this layout option, all events of the listed
channels will be displayed by timeline. You can
use the directional buttons to scroll through the
list of the events. Highlight an event and press OK
to display event options menu.
Press Back/Return button to use available tab
options. Highlight Filter tab and press OK to
see the filtering options. To change the layout
highlight Now/Next and press OK. You can use
the Previous Day and Next Day options to display
the events of the previous and next day.
Highlight Extras tab and press OK to access
below options.
Highlight Genre: Displays Highlight Genre
menu. Select a genre and press OK. The events
in the programme guide matching the selected
genre will be highlighted.
Guide Search: Displays searching options.
Using these options, you can search the
programme guide database in accordance
with the selected criteria. Matching results will
be listed.
Now: Displays current event of the highlighted
channel.
Zoom: Highlight and press OK to see events in
a wider time interval.
Event Options
Use the directional buttons to highlight an event
and press OK button to display Options menu.
The following options are available.
Select Channel: Using this option, you can switch
to the selected channel in order to watch it. The
programme guide will be closed.
More Info: Display detailed information on the
selected event. Use up and down directional
buttons to scroll through the text.
Set Timer on Event / Delete Timer on Event:
Select Set Timer on Event option and press OK.
You can set timers for future events. To cancel an
already set timer, highlight that event and press the
OK button. Then select Delete Timer on Event
option. The timer will be cancelled.
Notes: You cannot switch to any other channel
while there is an active timer on the current
channel.
It is not possible to set timer for two or more
individual events at the same time interval.
6
Quick start guide
Troubleshooting
Help is always at hand
DLED40UHDHDRS
Help and assistance
If you require any technical guidance or find that your TV is not operating as intended, a simple
solution can often be found in the Troubleshooting section of the instruction manual or online
at www.bush-support.co.uk
If you still require further assistance, call one of our experts on 0345 604 0105*. To help us give
you a fast and efficient service please have the following information ready:
Model Ref.
Serial number
Date of purchase
You can find these
on the rating plate - a
small information
panel (usually a
sticker or metal plate)
on the rear of your TV
This will be shown
on your receipt
Local call rates applies*
Integrated Catch-Up Services
You can enjoy Freeview Play catch-up TV
services that work directly through the electronic
programme guide. Whilst you are on a channel
use the directional buttons to scroll back in time
through the timeline-based guide. You will see
contents from last few days. Available catch-up
contents may change according to broadcasters
and will be marked with a play icon. Highlight
the content you want to play back and press the
OK button.
Make sure that your TV is connected to your home
network in order to use the catch-up services.
For further information regarding this matter and
other requirements for Freeview Play services refer
to the Connectivity and Freeview Play Platform
sections.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section
of the Instruction manual or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Bush enquiry lines may attract a charge and set up fee from residential lines depending
on your call plan/tariff. Mobile and other providers costs may vary, see www.bt.com/pricing for
details.
For security and training purposes, telephone calls to and from customer service centres may be
recorded and monitored. Calls from Republic of Ireland will attract international call charges.
Apps
Sources
Home
TV
Set tings
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section
of the Instruction manual or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Explore
1
2
Connections
Bringing it all together
You’ll soon be enjoying your new TV.
This guide will help you get started, full details of your TV and its features
can be found in the Instruction manual.
Getting to know your TV
You’ll be up and running in no time
Switching On/Off
First Time Installation
To Switch the TV On
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK. In the following steps of
the installation guide, set your preferences using
the directional buttons and OK button.
Connect the power cord to a power source such
as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
Aerial connection
Connect Power
Connect the aerial TV plug to the AERIAL INPUT
(ANT-TV) socket located on the rear side of the
TV.
IMPORTANT: The TV set is designed to operate
on a 220-240V AC, 50 Hz supply. After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set
to the mains. Plug the power cable to the mains
socket outlet.
Rear side of the TV
ANT-TV
Inserting Batteries into the Remote
Control
Connecting other devices to your
TV
Remove the back cover to reveal the battery
compartment. You need to do the followings in
order to do that:
See the Connections section in the user guide
for details on which other devices you can
connect to your TV.
• Place the tip of a pen or some other pointed
object in the hole above the cover and press
it down.
• Then press firmly on the cover and slide in the
direction of the arrow.
Insert two size AAA batteries. Make sure the (+)
and (-) signs match (observe correct polarity). Do
not mix old and new batteries. Replace only with
same or equivalent type. Place the cover back on.
If you want to connect a device to the TV, make
sure that both the TV and the device are turned
off before making any connection. After the
connection is done, you can turn on the units
and use them.
A message will be displayed on the screen when
the batteries are low and must be replaced. Note
that when the batteries are low, the performance
of the remote control may be impaired.
Batteries should not be exposed to excessive
heat such as sunshine, fire or the like.
• Press the Standby button, Programme +/- or a
numeric button on the remote control.
• Press the middle of the side function switch
on the TV in.
To Switch the TV Off
Press the Standby button on the remote control
or press the middle of the side function switch
on the TV in and hold it down for a few seconds,
the TV will switch into standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby
mode, the standby LED can blink to indicate
that features such as Standby Search, Over Air
Download or Timer is active. The LED can also
blink when you switch on the TV from standby
mode.
On the second screen set your country
preference. Depending on the country selection
you may be asked to set and confirm a PIN at this
point. The selected PIN cannot be 0000. You have
to enter it if you are asked to enter a PIN for any
menu operation later.
You can activate Store Mode option in the next
step. This option will configure your TV’s settings
for store environment and depending on the TV
model being used, the supported features of it
may be displayed on the side of the screen as
an info banner. This option is intended only for
store use. It is recommended to select Home
Mode for home use. This option will be available
in Settings>System>More menu and can be
turned off/on later. Make your selection and
press OK to continue.
Depending on the model of your TV and the
country selection Privacy Settings menu may
appear at this point. Using this menu you can
set your privacy privileges. Highlight a feature
and use Left and Right directional buttons to
enable or disable. Read the related explanations
displayed on the screen for each highlighted
feature before making any changes. You can
use Programme +/- buttons to scroll up and
down to read the entire text. You will be able
to change your preferences at any time later
from the Settings>System>Privacy Settings
menu. If the Internet Connection option is
disabled Network/Internet Settings screen will
be skipped and not displayed. If you have any
questions, complaints or comments regarding
this privacy policy or its enforcement, please
contact by email at smarttvsecurity@vosshub.
com.
Highlight Next and press OK button on the
remote control to continue and the Network/
Internet Settings menu will be displayed. Please
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section
of the Instruction manual or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section
of the Instruction manual or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
3
Getting to know your TV
You’ll be up and running in no time
refer to Connectivity section to configure a
wired or a wireless connection. If you want your
TV to consume less power in standby mode, you
can disable the Wake On option by setting it as
Off. After the settings are completed highlight
Next and press OK button to continue.
On the next screen you need to agree to the
terms and conditions of Freeview Play to make
use of the related services. Scroll the page to
read the entire text using the up/down directional
buttons or Programme +/- buttons. Highlight
Yes and press OK on the remote to confirm and
proceed. Highlight No and press OK to proceed
without confirmation. For further requirements
for Freeview Play services refer to the Freeview
Play Platform section.
On next screen you can set broadcast types
to be searched, set your encrypted channel
searching and time zone (depending on the
country selection)preferences. Additionally you
can set a broadcast type as your favourite one.
Priority will be given to the selected broadcast
type during the search process and the channels
of it will be listed on the top of the channel list.
When finished, highlight Next and press OK to
continue.
About Selecting Broadcast Type
To turn a search option for a broadcast type
highlight it and press OK. The checkbox next
to the selected option will be checked. To
turn the search option off clear the checkbox
by pressing OK after moving the focus on the
desired broadcast type option.
the channel list according to your preferences
using the Edit tab options or press the Home
button to quit and watch TV.
While the search continues a message may
appear, asking whether you want to sort
channels according to the LCN(*). Select Yes
and press OK to confirm.
(*) LCN is the Logical Channel Number system
that organizes available broadcasts in accordance
with a recognizable channel number sequence
(if available).
Note: Do not turn off the TV while initializing
first time installation. Note that, some options
may not be available depending on the country
selection.
Note: Before connecting to the Freeview
Play platform, make sure that you follow the
steps below, otherwise you will not be able
to access the Freeview Play platform:
• Connect TV to the internet (via WLAN or Ethernet)
4
Getting to know your TV
You’ll be up and running in no time
Remote Control
1.
2.
Standby: Switches On / Off the TV
3.
Language: Displays and changes audio/subtitle
language and turns subtitles on or off (digital TV,
where available)
4.
5.
6.
7.
Mute: Completely turns off the volume of the TV
8.
OK: Confirms user selections, holds the page (in TXT
mode), views Channels menu (DTV mode)
9.
Back/Return: Returns to previous screen, previous
menu, opens index page (in TXT mode). Quickly cycles
between previous and current channels or sources
10.
11.
Netflix: Launches the Netflix application
12.
Coloured Buttons: Follow the on-screen instructions
for coloured button functions
13.
Rewind: Moves frames backwards in media such
as movies
14.
15.
16.
17.
18.
No function
19.
Prime Video: Launches the Amazon Prime Video
application
• Accept the T&Cs to enable Freeview Play services
• A minimum broadband speed of 2Mbps is required to
watch catch up and on demand services.
This will count towards any monthly broadband data
allowance. Only selected channels provide 7-day
catch up.
Digital Aerial: If D. Aerial broadcast search
option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings
are completed.
After the initial settings are completed TV will start
to search for available broadcasts of the selected
broadcast types.
While the search continues current scan
results will be displayed at the bottom of the
screen. After all the available stations are stored,
Channels menu will be displayed. You can edit
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section
of the Instruction manual or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Numeric buttons: Switches the channel, enters a
number or a letter in the text box on the screen.
Volume +/Guide: Displays the electronic programme guide
Directional buttons: Helps navigate menus, content
etc. and displays the subpages in TXT mode when
pressed Right or Left
Freeview Play: Connects to the Freeview Play platform
where you can access available catch-up TV services
Play: Starts to play selected media
Pause: Pauses the media being played
Stop: Stops the media being played
Fast Forward: Moves frames forward in media such
as movies
20. YouTube: Launches the YouTube application
21. Exit: Closes and exits from displayed menus or returns
to previous screen
22. Info: Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
23. Home: Displays TV menu
24. Programme +/25. Text: Displays teletext (where available), press again
to superimpose the teletext over a normal broadcast
picture (mix)
26. Source:
Shows available broadcast and content
sources
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section
of the Instruction manual or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement