Bush DWFS41DBSQ Full Size Dishwasher Instruction manual

Bush DWFS41DBSQ Full Size Dishwasher Instruction manual
Instruction manual
Dishwasher
<DWFS41DBSQ>
You’ll soon be enjoying your new Dishwasher.
It all begins here, with your instructions. Don’t worry,
there’s nothing too technical coming up. Just
simple, step-by-step guidance to get you up and
running quickly. Sound good? Then let’s get started.
Help and Guidance
We’re here to help you get the most from your Dishwasher. Should you require any
guidance, a simple solution can often be found online at:
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 257 7271.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
2
Contents
1
Safety information
2
3
7
Safety information
6
Getting to know your
Dishwasher
Product support
Troubleshooting
32
Help and assistance
34
Declaration of conformance to product
standards
35
Ready? Let’s begin
10
Disposal
35
Accessories
13
Guarantee
36
Installing your Dishwasher
16
Connections (electrical, water)
17
4
20
5
24
25
6
28
28
29
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
3
This page is left intentionally blank
Safety information
1
Safety information
Important - Please read these instructions fully before
installing or operating your Dishwasher.
Installation Warnings
Before use
• Carefully read all instructions before using your
appliance and keep this manual for future
reference.
• Check the machine and its packaging for any
damage. If the supply cord is damaged, it must be
replaced by the manufacturer, their service agent
or similarly qualified persons in order to avoid a
hazard.
• Choose a suitable and safe place to install your
machine.
• Follow the instructions on installing and connecting
the machine.
• Unplug the machine before installation.
• Machine should be installed by authorised service
agent or similarly qualified persons only.
• Unwrap the packaging as indicated and dispose of
it according to the rules provided.
• Check whether the indoor electrical fuse system is
connected according to regulations.
• Packing materials may be dangerous to the
children. Please keep all packing materials
(plastic bags, foams etc) far away from children.
• All electrical connections must match the values on
the plate
• This appliance can be used by children aged from
8 years and above, and by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning the use of
the appliance in a safe way and understand
hazards involved. Children should not play with
the appliance. Cleaning and user maintenance
shall not be done by children without supervision.
• Children should be supervised to ensure that they
do not play with the appliance. There may be
some residue left in the machine after washing.
Keep children away from the machine when it is
open.
• Ensure old machines do not threaten child safety.
Children can lock themselves in old machines. To
prevent such a situation, break the door lock and
cut the mains cable..
• Ensure the machine does not stand on the electrical
supply cable.
• NEVER use an extension cord or a multiple socket
connection.
• The plug should be accessible after the machine is
installed.
• After installation, run your machine unloaded for the
first time.
• The machine MUST not be plugged in during
positioning.
• Always use the plug supplied with your machine.
• The machine's electrical cable should be replaced in
case of a damage by an authorised service agent or
similarly qualified person to prevent a hazard.
• Only original spare parts should be used with the
machine.
• Check the heat-resistance of plastic items before
washing them in the machine.
• Do not put unsuitable items for dishwashing into
the machine and do not over-fill any basket above
its capacity.
• Our company will not be responsible for any
deformation inside of the machine due to misuse.
WARNING: Some dishwasher detergents are strongly
alkaline. They can be extremely dangerous if
swallowed. Avoid contact with the skin and eyes and
keep children away from the dishwasher when the
dooris open. Check that the detergent receptacle is
empty after completion of the wash cycle.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
6
Safety information
Safety information
Important - Please read these instructions fully before
installing or operating your Dishwasher
During Use
This machine is for domestic use only, do not use it for
other purposes. Commercial use will void the
guarantee.
•
Do not stand, sit or place loads on the open
door of the dishwasher.
•
Only use detergents and rinse aids
produced specifically for dishwashers. Our
company is not responsible for any damage
that may occur due to misuse.
•
Do not drink water from the machine.
•
Due to the danger of an explosion, do not
place any chemical dissolving agents into
the machine's washing section.
•
•
•
•
Do not open the door while the machine is
in operation, hot water may spill out. Safety
devices ensure the machine stops if the
door is opened.
The machine door should not be left open.
It may present a trip hazard or cause
accidents.
Place knives and other sharp objects in the
cutlery basket in a blade-down position.
For safety, disconnect the plug once a
program has finished.
•
To avoid an electric shock, do not unplug
the machine with wet hands.
•
Pull the plug to disconnect the machine
from the mains, never pull on the cord.
• For models with the automatic dooropening system, when the EnergySave
option is active, the door will open at
the end of a program. To prevent
damage to your dishwasher, do not
force the door close after 1 minute of
auto-open. For effective drying, keep
the door open for 30 minutes after a
programme is complete. Do not stand
in front of the door after the autoopen signal sounds.
• In the case of a malfunction, repair
should only be performed by
authorised service personnel.
Otherwise, the warranty will be void.
• Before repair work, the machine
should be disconnected from the
mains. Do not pull the cable to unplug
the machine. Switch off the water tap.
• Operation at a low voltage will cause a
decline in performance levels.
• Do not use this appliance if there are
any missing or damaged parts.
• Do not attempt to repair the appliance
yourself. contact the manufacturer,
their approved service agent or the
customer helpline on: 0345 257 7271.
If you require any technical guidance
find that
yourassistance,
product iscall
notone
operating
intended,
a simple
or online at www.argos-support.co.uk
If you still or
require
further
of our as
experts
on XXXX
XXXsolution
XXXX. can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Safety information
7
This page is left intentionally blank
Getting to know your
Dishwasher
2
Getting to know your Dishwasher
You’ll be up and running in no time
Ready? Let’s begin...
Please read these instructions carefully. They contain
important information which will help you get the best
from your Dishwasher and ensure safe and
correct installation and operation.
If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
10
Getting to know your Dishwasher
Getting to know your Dishwasher
You’ll be up and running in no time
13
1.
Worktop
7.
Rating plate
2.
Upper basket with
racks
8.
Control Panel
3.
9.
Upper spray arm
Detergent and rinse-aid
dispenser
4.
Lower basket
10. Cutlery basket
5.
Lower spray arm
11. Salt dispenser
Filters
12. Upper basket track latch
6.
13. Turbo Active Drying Unit: This
system provides better drying
performance for your dishes.
Capacity
13 place
settings
Dimensions
Height
Width
Depth
850(mm)
600(mm)
598(mm)
Net weight
46 (kg)
Operating
voltage /
frequency
220-240V
50 (Hz)
Total current
10(A)
Total power
1900(W)
Maximum:
Water supply 1 (Mpa)
pressure
Minimum:
0.03 (Mpa)
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Getting to know your Dishwasher
11
Getting to know your Dishwasher
You’ll be up and running in no time
Model
Capacity
Power
Energy Class
Drying Class
BFSNB12W
12 pcs
1900W
A++
A
BFSNB12B
12 pcs
1900W
A++
A
Accessories
This machine includes the below accessories, please
install these parts before operating.
•
Water Inlet Hose x1
•
Drain Hose x1
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
12
Getting to know your Dishwasher
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Getting to know your Dishwasher
13
Installing your <Dishwasher>
3
Installing your Dishwasher
Bringing it all together
Positioning your Dishwasher
Water Inlet Hose
When positioning the machine, place it in
an area where dishes can be easily loaded
and unloaded. Do not put the machine in an
area where the ambient temperature falls
below 0°C..
Read all warnings located on the packaging
before removing the packaging and
positioning the machine.
Place the machine close to a water tap
and drain. Take into consideration that the
connections will not be altered once the
machine is in position.
Do not hold the machine by its door or
panel.
Leave an adequate distance around the
machine to allow ease of movement when
cleaning.
Ensure the water inlet and outlet
hoses are not squeezed or trapped
and that the machine does not stand on the electrical
cable while positioning.
WARNING: Use the new water inlet hose
supplied with your machine, do not use an old
machine's hose.
WARNING: Run water through the new hose
before connecting.
WARNING: Connect the hose directly to the
water inlet tap. The pressure supplied by the tap
should be a minimum of 0.03MPa and a maximum
of 1 MPa If the pressure exceeds 1MPa, a pressure
relief valve must be fitted between the connection.
WARNING: After the connections are made,
turn the tap on fully and check for water leaks.
Always turn off the water inlet tap after a wash
program has finished.
Adjust the feet so the machine is level and
balanced. The machine should be placed
on flat ground otherwise it will be unstable
and the door of the machine will not close
properly.
Water connection
We recommend fitting a filter to your water
inlet supply in order to prevent damage to
your machine due to contamination (sand,
rust, etc.) from indoor plumbing. This will
also help prevent yellowing and deposit
formation after washing.
An Aquastop water spout is available with
some models. Do not damage it or allow it to
become kinked or twisted.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
15
Installing your Dishwasher
Installing your Dishwasher
Bringing it all together
Drain Hose Connection
Connect water drain hose directly to water
drain hole or to the sink outlet spigot. This
connection should be minimum 50cm and
maximum 110cm from floor plane.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
IMPORTANT: Items will not wash properly if a
drain hose longer than 4m is used.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
CAUTION
Electrical Connection
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
WARNING: Your
machine
is(OR
set
DO NOT
REMOVE COVER
BACK).
USER-SERVICEABLE PARTS INSIDE.
operates at 220-240V NO
If
the
mains
voltage
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
supply to your machine
is 110V connect a
transformer of 110/220V and 3000 W
between the electrical connection
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The earthed plug of the
machine must be connected to an earthed
outlet supplied by suitable voltage and
CAUTION
current.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
In TOthe
absence
earthing
CAUTION:
REDUCE
THE RISK OFof
ELECTRIC
SHOCK, DO NOT REMOVE COVER
installation, an authorised
electrician
should
(OR BACK). NO USER-SERVICEABLE
PARTS installation.
INSIDE. REFER SERVICING
carry out an earthing
In TO
the case
QUALIFIED SERVICE PERSONNEL.
of use without earthing installed, we will not
be responsible for any loss of use that may
occur.
The indoor fuse current value
should be 10-16A
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Installing your Dishwasher
16
Installing your Dishwasher
Bringing it all together
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
CAUTION
This page is left intentionally blank
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
17
Installing your Dishwasher
Functions
4
Functions
Simple everyday use
Programme Table
Programme
Duration
(min)
Description
Prewash
15
To rinse dishes that you plan to wash later.
14
Fastest programme for lightly soiled and recently used dishes. Suitable for 4 place
settings.
Quick 30’
30
For lightly soiled dishes and a quick wash.
Eco (Reference)
254
Standard programme for normally soiled, daily-used dishes.
Dual ProWash
113
For both lightly soiled, delicate glassware and heavily soiled crockery at the
same time.
Super 50’
50
For normally soiled, daily-used dishes with a faster programme.
Hygiene
123
High-temperature, disinfecting programme for heavily soiled dishes.
Steamwash
161
For heavily soiled dishes with effective cleaning by steam.
Auto Intensive
111-179
Auto programme for heavily soiled dishes.
Quick Wash 14’
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE
AMOUNT OF DISHES, THE WATER TEMPERATURE, THE AMBIENT TEMPERATURE
AND SELECTED ADDITIONAL FUNCTIONS.
• Only use powder detergent for short programmes.
•
Short programmes do not include drying.
•
To assist drying, we recommend slightly opening the door after a cycle is complete.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
19
Functions
Simple everyday use
Control Panel
9
NOTE: If you want your dishes to be washed more quickly,
select the Extra Fast option by pressing the Extra button
until its lamp turns on. This option washes the dishes
with more pressure therefore the cycle is completed more
quickly, but water and energy use is increased.
NOTE: If you want your dishes to be washed more quickly,
Press the On/Off button (4), to switch on the machine. The
On/Off lamp remains lit when the machine is on.
Select a suitable programme by pressing the programme
button (5).
Press the Start/Pause button (6) to start the program. The,
Wash lamp will turn on and the Remaining Time Indicator
(7) will sh w the programme duration. It also indicates
the remaining time during the programme flow. If you
open the door of your machine when the programme is
running, the duration of the programme pauses and the
programme number and programme duration are shown
alternately.
Programme flow can be monitored via Wash,Rinse Dry
and End lamps on the Remaining Time Indicator (7). The
machine remains silent for about 40-50 minutes when the
drying lamp is on.
NOTE: When you have less than half a load, you can
select the Half Load option. There are three options, both
baskets, upper basket, or lower basket. Press the half load
button until the indicator which corresponds to your
selection lights up.
NOTE: Press the Half load button for 3 seconds to activate
the Tablet option when using combined detergent that
contains salt, rinse aid and extra functions.
NOTE: You may select the Energy Save option which
activates the door opening system at the end of the
program. The auto door opening system provides the
required drying performance at low rinsing temperatures
and reduces energy consumption.
NOTE: An Extra Silent option is activated by pressing the
Extra button until its led is on, the dishes are washed with
less pressure, which provides a more gentle and quieter
wash.
NOTE: If you have selected an extra feature for the current
washing program, this feature will remain active on the
next washing program. If you want to cancel this feature
on the newly selected washing program, press the Extra
(1),Delay (2) or Half load button (3) until the related lamps
are off or turn the machine off with the
On/Off button (4). If you would like to use an extra feature
with the newly selected program, select the desired
function.
NOTE: Child lock is activated/deactivated by pressing both
“Extra” (1) and “Half Load”(3) buttons for about 3 seconds.
When it is activated, all leds blink and “CL” is shown on the
Remaining Time Indicator (7) once. When it is deactivated,
all lamps and “CL” blink twice.
NOTE: You can delay the start time of the program for
1-2...19 hours by pressing the delay button (2) before the
program starts. If you want to change the delay time,first
press the Start/Pause button and then the delay button to
select a new delay time. To select a new delay time, press
the Start/Pause button. To cancel the delay, you need to
switch to 0 hour by using the delay button.
NOTE: If you switch the machine to the off position after
selecting the delay time and the programme has started,
the delayed time is cancelled.
NOTE: When more softening salt is required, the salt lack
warning indicator (9) turns on and you need to fill the salt
chamber.
NOTE: If you switch the machine to the off position after
selecting the delay time and the programme has started,
the delayed time is cancelled.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
20
Functions
Functions
Simple everyday use
NOTE: When more softening salt is required, the salt lack
warning indicator (9) turns on and you need to fill the
salt chamber.
NOTE: When more rinse-aid is required, the, rinse aid lack
warning indicator (9) turns on and you softening fill the
rinse aid chamber.
Cancelling a programme
Press the Start/Pause
button for 3 seconds.
During cancellation, the End light blinks.
The machine discharges the water
inside it for about 30 seconds.
Changing a programme
If you would like to select a different program when a
progam is running.
Press the Start/Pause button.
After the program stops, select
your desired program via the
Program selection button.
When the End light turns on, the
programme has been cancelled.
Switching the Machine Off
Pull the plug out of the outlet.
Turn off the water tap.
Switch your machine off with the On/
Off button after the programme has
ended and the End light turns on.
Start the new program by pressing
the Start/Pause button.
The new program will resume the
course of the old programme.
NOTE: Do not open the door before the program ends.
NOTE: At the end of the washing program, you can leave
the door of your machine ajar to hasten the drying.
NOTE: If the door of machine is opened or power is cut off
during washing, the program will continue when the door is
closed or the power is restored.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Functions
21
This page is left intentionally blank
Using your <Dishwasher>
5
Using your Dishwasher
Getting the most from your appliance
Before using your appliance
Preparing your Dishwasher for first use
Test Strip
Run water Keep the
through tap strip in
water(1sec)
(1min.)
Set the hardness
level of your
machine.
Wai
(1min.)
t
Shake
the strip.
1
2
3
4
5
6
Check whether the electricity and supply water
specifications match the values indicated in the
installation instructions for the machine.
Remove all packaging materials inside the machine.
Set the water softener level.
Fill the rinse aid compartment.
Fill the salt (If Available)
Water Hardness Table
To fill with softener salt, open the salt compartment
cap by turning it counter clockwise. (1) (2) At first use,
fill the compartment with 1 kg salt and water (3) until it
is almost overflowing. If available, using the funnel (4)
provided will make filling easier. Replace the cap and
close it. After every 20th-30th wash, add salt into your
machine until it fills up (approx. 1 kg).
1
NOTE: Level is set 3 as default. If the water is
well water or has a hardness level above 90
dF, we recommend that you use filter and
refinement devices.
2
Level
German
dH
French
dF
British
dE
Indicator
1
0-5
0-9
0-6
L1 is shown on display.
2
6-11
10-20
7-14
L2 is shown on display.
3
12-17
21-30
15-21
L3 is shown on display.
4
18-22
31-40
22-28
L4 is shown on display.
5
23-34
41-60
29-42
L5 is shown on display.
6
35-50
61-90
43-63
L6 is shown on display.
Water Softener System
LT
SA
3
4
The dishwasher is equipped with a water softener
which reduces the hardness in the mains water
supply. To find out the hardness level of your tap
water, contact your water company or use the
test strip (if available)
Setting
• Turn the knob to the "Off" position.
Fill the salt compartment with water the first time you
fill the salt compartment only.
• Push the "Start/Pause" button and hold it
down.
Use softener salt specifically produced for use in
dishwashers.
• Turn the knob clockwise one step.
When you start your dishwasher, the salt compartment
is filled with water, therefore put the softener salt in
prior to starting your machine.
If the softener salt has overflowed and you do not start
the machine immediately, run a short washing
program to protect your machine against corrosion.
• Hold down the "Start/Pause" button until the
LED's flash and "SL" disappears.
• The machine will display the last setting.
• Set the level by pushing the "+" and "-"
buttons.
• Turn the knob to the "Off" position to save
the setting.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
24
Using your Dishwasher
Using your Dishwasher
Getting the most from your appliance
Before using the appliance
Detergent usage
Only use detergents specifically designed for
domestic dishwashers.
Add the recommended amount of detergent for the
selected programme to ensure the best
performance.
Keep your detergents in cool, dry places out of
reach of children.
See the detergent manufacturer's instructions for a
further information.
Filling the detergent
DE
TER
GE
NT
Push the latch to open the dispenser and
pour in the detergent.
Close the lid and press it until it locks in place. The
dispenser should be refilled just before the start of
each programme. If the dishes are heavily soiled,
place additional detergent in the pre-wash detergent
chamber.
When you stop using combined detergents, make
sure that water hardness and rinse aid settings are
set to correct level.
Rinse-aid usage
Rinse-aid makes dishes sparkle and helps them to
dry without spotting. Rinse-aid is required for stainfree utensils and clear glasses. Use only rinse-aid for
domestic dishwashers.
Filling the rinse-aid and setting
To fill the rinse aid compartment, open the
rinse-aid compartment cap. Fill the compartment
with rinse aid to the MAX level and then close
the cap. Be careful not to overfill the rinse aid
compartment and wipe up any spills.
In order to change the rinse aid level, follow
the below steps before turning on the
machine:
• Push the programme button and hold it
down.
• Turn on the machine.
• Hold down the programme button until “rA”
disappears from the display. Rinse aid setting
follows water hardness setting.
• The machine will display the last setting.
• Set the level by pushing the programme
button.
• Switch off the machine to save the setting.
• The factory setting is “4”.
If the dishes are not drying properly or are
spotted, increase the level. If blue stains form on
your dishes, decrease level.
Using combined detergents
These products should be used according to the
manufacturer's instructions.
Never put combined detergents into the interior
section or the cutlery basket.
Combined detergents contain not only the
detergent but also rinse-aid, salt replacement
substances and additional components depending
on the combination.
Level
Brightener Dose
Indicator
1
We recommend you do not use combined detergents
in short programmes.
Rinse-aid not
dispensed
r1 is shown on the
display.
2
1 dose is
dispensed
r2 is shown on the
display.
Please use powder detergents in such programmes.
3
2 doses are
dispensed
r3 is shown on the
display.
If you encounter problems when using combined
detergents, please contact the detergent
manufacturer.
4
3 doses are
dispensed
r4 is shown on the
display.
5
4 doses are
dispensed
r5 is shown on the
display.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Using your Dishwasher
25
Using your Dishwasher
Getting the most from your appliance
1
Loading your Dishwasher
2
For best results, follow these loading
guidelines.
We recommend that you place large items
(pots, pans, lids, plates and bowls) which
are heavily soiled in the lower basket.
The upper basket is designed for delicate
and lighter dishware such as glasses,
coffee and tea cups and saucers. Position the
dishes so that they will not get moved by the
spray of water.
Cutlery should be placed in the cutlery
basket. Items should be loaded individually
into the appropriate slots with their handles
downwards. Long utensils should be placed
horizontally on the baskets.
WARNING: Take care not to obstruct
the rotation of spray arms.
Recommendations
Remove any coarse residue on dishes before
placing the dishes in the machine. Start the
machine with full load.
Upper Basket
Height adjustment
Turn the Rail Stop Clips, at the ends of the rails, to the
sides to open them (as shown in the image below), then
pull out and remove the basket. Change the position of
the wheels, then reinstall the basket to the rail, making
sure to close the Rail Stop Clips. When the upper basket
is in the higher position, large items such as pans can be
placed on the lower basket.
NEVER overload the drawers or place dishes
in the wrong basket.
WARNING: Always place sharp
utensils with the sharp point down and open
utensils with their openings down.
Height Adjustable Rack (peg type)
The height adjustable racks enable glasses
and cups to be placed on or under the
racks. The racks can be adjusted to 2
different heights. Cutlery and utensils can
also be placed on the racks horizontally.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
26
Using your Dishwasher
Alternative basket loads
Lower basket
Using your Dishwasher
Getting the most from your appliance
Unsuitable items for dishwashing
Cigarette ashes, candle leftovers, polish, paint,
chemical substances, iron-alloy materials.
Upper basket
Forks, spoons and knives with wooden, bone, ivory
or nacrecoated handles, glued items, items soiled
with abrasive, acidic or base chemicals.
Temperature-sensitive plastics, copper or tincoated
containers.
Aluminum and silver objects.
Some delicate glasses, ornamental printed
porcelains: some crystal items, adhered cutlery, lead
crystal glasses, cutting boards, synthetic fibred items.
Absorbent items such as sponges or kitchen rugs.
IMPORTANT: In future, purchase dishwasher-proof
kitchenware.
Incorrect loads
Important Note for Test Laboratories
For detailed information required for tests according
to EN normatives and a softcopy of the manual,
please send the model name and serial number to
the following address: dishwasher@standardtest.info
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Using your Dishwasher
27
This page is left intentionally blank
Care and maintenance
6
Care and maintenance
Looking after your appliance
Cleaning
Cleaning your Dishwasher is important to maintain the
machine’s service life.
Oil and limescale may build up in your Dishwasher
over time. If this occurs:
• Fill the detergent compartment but do not load
any dishes. Select a programme which runs at
high temperature and run the Dishwasher empty.
If this does not clean your Dishwasher
sufficiently, use a cleaning agent designed for use
with dishwashers.
• Wipe the door seals regularly with a damp cloth
to remove any accumulated residue.
Cleaning machine and filters
• Never use your Dishwasher without a filter.
• Incorrect fitting of the filter will reduce the
washing effectiveness.
• Clean filters are necessary for proper running of
the machine.
Spray arms
Make sure that the spray holes are not clogged and that no
food waste is stuck to the spray arms. If there is any
clogging, remove the spray arms and clean them under
water. To remove the upper spray arm undo the nut
holding it in position by turning it clockwise and pulling it
downwards. Make sure that the nut is properly tightened
when refitting the upper spray arm.
Clean the filters and spray arms at least once a week.
If any food waste remains on the coarse and fine
filters, remove them and clean them thoroughly with
water.
a) Micro Filter
b) Coarse Filter
c) Metal Filter
b
a
1
2
c
3
4
To remove and clean the filter combination, turn it
counter clockwise and remove it by lifting it upwards
(1).Pull the coarse filter out of the micro filter (2).Then
pull and remove the metal filter (3).Rinse the filter with
lots of water until it is free of residue. Reassemble the
filters. Replace the filter insert, and rotate it clockwise
(4).
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
30
Care and maintenance
Care and maintenance
Looking after your appliance
Technical specifications
Supplier's trade mark
BUSH
Supplier's model
DWFS41DBSQ
Capacity of dishwasher
13
The energy efficiency class
A+++
Annual energy consumption in kWh per year (AEc) ( 280 Cycle )*
234
Energy consumption (Et) (kWh per cycle)
0,82
Off-mode power consumption (W) (Po)
0,50
1,00
Left-on mode power consumption (W) (Pı)
Annual water consumption in litres per year (AWc) ( 280 Cycle )**
2520
Drying efficiency class***
A
Standard programme name****
Eco
Programme time for standard cycle ( min)
254
-
Duration of the left-on mode (Tı ) (min)
Airborne acoustical noise emissions ( dB(A) re 1 pW )
41
Freestanding/Built-in
Freestanding
* Energy consumption 234 kwh per year, based on 280 standard cleaning cycles using cold water fill and the
consumption of low power modes. Actual energy consumption will depend on how the appliance is used.
** Water consumption 2520 litres per year based on 280 standard cleaning cycles. Actual water consumption will
depend on how appliance is used.
*** Drying efficiency class A on a scale from G (least efficient) to A (most efficient).
**** The “Eco” is the standard cleaning cycle to which the information in the label and the fiche relates. This
programme is suitable to clean normally soiled tableware and it is the most efficient programme in terms of
combined energy and water consumption.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Care and maintenance
31
This page is left intentionally blank
Product support
7
Product support
Help is always at hand
Troubleshooting
FAULT
POSSIBLE CAUSE
Your Dishwasher is not plugged in.
Your Dishwasher is not switched on.
Fuse blown.
The programme does not
start.
Water inlet tap is closed.
Your Dishwasher door is open.
Plug your Dishwasher in.
Switch your Dishwasher on by pressing the On/Off
button.
Check your indoor fuses.
Turn on the water inlet tap.
Close the Dishwasher door.
Water inlet hose and machine filters are
clogged.
Check the water inlet hose and machine filters and
make sure they are not clogged.
Water drain hose is clogged or twisted.
Check the drain hose, then either clean or untwist it.
Water remains inside the
machine.
The filters are clogged.
The programme is not finished yet.
Machine stops during
washing.
Shaking and hitting noises are
heard during a wash operation.
TROUBLESHOOTING
Clean the filters.
Wait until the programme is finished.
Power failure.
Check mains power.
Water inlet failure.
Check water tap.
The spray arm is hitting the dishes in the lower
basket.
Dishes placed incorrectly, sprayed water not
reaching affected dishes.
Move or remove items blocking the spray arm.
Do not overload baskets.
Dishes leaning each another.
Place dishes as instructed in the section on loading your
dishwasher.
Not enough detergent used.
Use the correct amount of detergent, as instructed
in the programme table.
Partial food wastes remain
on the dishes.
Wrong wash programme selected.
Spray arms clogged with food waste.
Filters or water drain pump clogged or filter
misplaced.
Use the information in the programme table to select the
most appropriate programme.
Clean the holes in the spray arms with thin objects.
Check the drain hose and filters are correctly
fitted.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
32
Product support
Care and maintenance
Looking after your appliance
FAULT
POSSIBLE CAUSE
Not enough detergent used.
Whitish stains remains on
dishes.
Rinse aid dosage and/or water softener
setting set too low.
High water hardness level.
Salt compartment cap not closed properly.
Drying option is not selected.
TROUBLESHOOTING
Use the correct amount of detergent, as instructed
in the programme table.
Increase rinse aid and/or water softener level.
Increase water softerner level and add salt.
Check that the salt compartment cap is closed
properly.
Select a programme with a drying option.
Dishes do not dry.
Rinse aid dosage set too low.
Stainless-steel quality of the dishes is
insufficient.
High level of salt in wash water.
Rust stains form on the dishes.
Use only dishwasher-proof sets.
Adjust the water hardness level using water hardness
table.
Salt compartment cap not closed properly.
Check that the salt compartment cap is closed
properly.
Too much salt spilled in the Dishwasher
while filling it with salt.
Use funnel while filling salt to the
compartment to avoid spillage.
A poor mains grounding.
Detergent remains in the
detergent compartment.
Increase rinse aid dosage setting.
Detergent was added when the detergent
compartment was wet.
Consult a qualified electrician immediately.
Make sure detergent compartment is dry before use.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
Care and maintenance
33
Product support
Help is always at hand
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE
CODE
POSSIBLE FAULT
WHAT TO DO
Make sure the water inlet tap is open and water is flowing
F5
Insufficient water
Separate the inlet hose from the tap and clean the filter of the hose.
Contact for service if the error continues.
F3
Continuous water input
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
F2
Inability to discharge water
Cancel the program.
If the error continues, contact for service.
F8
Heater error
F1
Overflow
Contact for service.
Unplug the machine and close the tap.
Contact for service.
FE
F7
Faulty electronic card
Overheating
Contact for service.
Contact for service.
F9
Divisor position error
Contact for service.
F6
Faulty heater sensor
Contact for service.
PRACTICAL INFORMATION
When the machine isn’t in operation:
• Disconnect the plug and close the tap.
• Leave the door slightly open to prevent odour formation.
Select the dry option to remove water droplets.
Place dishes in the machine properly to achieve the best energy consumption, washing and drying performance.
Please see the programme and consumption table for more information.
Rinse dirty dishes before placing them in the dishwasher.
Only use the Prewash programme when necessary.
Do not place the machine near a refrigerator because it will reach high temperatures.
If the machine is located in an area that is at risk of freezing, close the tap, disconnect the inlet hose from the tap
and drain the water inside the hose and the machine completely.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
34
Product support
Product support
Help is always at hand
Help and assistance
If you require any technical guidance or find that your Dishwasher is not operating as intended, a simple solution
can often be found in the Troubleshooting section of these instructions or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on 0345 257 7271*. To help give us give you a fast and
efficient service please have the following information ready:
Model Ref.
Serial number
Date of purchase
You can find these on
the rating plate - a small
information panel (usually
a sticker or metal plate) on
the rear of your appliance
This will be shown on
your receipt
Local call rates applies*
Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other
providers costs may vary, see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from
Republic of Ireland will attract international call charges.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
35
Declaration of conformance to
product standards
We declare that our products meet the applicable
European Directives, Decisions and Regulations and
the requirements listed in the standards referenced.
Packaging and the Environment
Packaging materials protect your machine from
damage that may occur during transportation. The
packaging materials are environmentally friendly as
they are recyclable. The use of recycled material
reduces raw material consumption and therefore
decreases waste production.
Disposal
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead, it
shall be handed over to the applicable
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local city office,
your household waste disposal service or the
shop where the product was purchased.
Recycling
• Some machine components and packaging
consist of recyclable materials.
• Plastics are marked with the international
abbreviations:(>PE<, >PP<, etc. )
• The cardboard parts consist of recycled paper.
They can be put into waste paper containers for
recycling.
• Material unsuitable for domestic waste must be
disposed of at recycling centres.
• Contact a relevant recycling centre to obtain
information about disposal of different materials.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
36
Product support
Call us now and activate your 12 month guarantee
Thank you for choosing Bush. Your new product is guaranteed against faults and
breakdowns for 12 months. Don’t forget to register it with us today so we can provide you
with our best possible after-sales service and useful updates.
www.bushregistration.co.uk
FREEPHONE*
0800 597 8548
Lines are open 8am - 8pm, 365 days a year. *Calls may be recorded and monitored.
Your Bush Guarantee
This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to
faulty materials or workmanship will be repaired free of charge (or if applicable the product will be replaced or the
purchase price refunded) where possible during this period by the dealer from who your purchased the unit.
The guarantee is subject to the following provisions:
•
The guarantee does not cover accidental damage,
misuse, cabinet parts, knobs or consumable items.
•
The product must be correctly installed and
operated in accordance with the instructions
contained in the manual.
•
It must be used solely for domestic purposes. The
guarantee will be rendered invalid if the product is
re-sold or has been damaged by inexpert repair.
•
Specifications are subject to change without notice.
•
Bush disclaim any liability for loss or damage arising
from the breakdown of the product.
•
This guarantee is in addition to and does not
diminish your statutory or legal rights.
Important Data Protection Information
If you provide us with information about another
person, you confirm that they have appointed you
to act for them, to consent to the processing of their
personal data including sensitive personal data and
that you have informed them of our identity and the
purposes (as set out in the Important Data Privacy
notice displayed overleaf) for which their personal data
will be processed.
You are entitled to ask for a copy of the information
we hold about you (for which we may charge a small
fee) and to have any inaccuracies in your information
corrected.
For quality control and training purposes, we may
monitor or record your communications with us.
If your personal details change, if you change your
mind about any of your marketing preferences or if you
have any queries about how we use your information,
please let us know by contacting our Data Protection
Officer, Domestic & General, Leicester House
17 Leicester Street, Bedworth, Warwickshire
CV12 8JP.
Guarantor: Argos Limited - 489 - 499 Avebury Blvd. - Milton Keynes - MK9 2NW
Product support
37
Contact:
www.bush-support.com
Helpline: 0345 257 7271
52280663 R35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement