Bush V8211 Lightweight Bagless Handstick Vacuum Cleaner Instruction manual
Bush V8211_03 is a lightweight, bagless vacuum cleaner that offers powerful suction for efficient cleaning on both hard floors and carpets. With its versatile design, it can be used as a handheld vacuum for above-floor cleaning or as a traditional upright vacuum for thorough floor cleaning. The HEPA filter captures 99.97% of dust and allergens, ensuring a cleaner and healthier living environment. It also comes with a crevice tool and dusting brush for cleaning hard-to-reach areas and delicate surfaces.
Advertisement
Advertisement
2016-12-26 new 版 本 1 145.00 mm V8211_03
vacuum cleaner
vacuum cleaner
If you still require further assistance, call one of our experts on
TMTI HELPLINE 0345 604 0105
Electrical 6 8
vacuum cleaner
Ready?Let's begin Accessories
vacuum cleaner
10 12 Unpacking Assembly 14 14
vacuum cleaner
First use of vacuum cleaner.
Using the vacuum cleaner
Care and maintenance
Cleaning Care and maintenance Technical specification 16 17 20 21 22 Toubleshooting Help and assistance Declaration of conformance to product Standards Disposal 24 25 26 27 0345 604 0105 3
6
WARNINGS
This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Regarding the detailed instructions for the method and frequency of cleaning and the precautions during user maintenance, refer to the section “Care and maitenance” on page 20 of the manual.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
Following objects are strictly banned, otherwise the vacuum cleaner will be damaged or fire calamity will be caused, which bring such accidents as human body injuries: -Don't pick up large or sharp broken such as glasses.
-Don't pick up harming or erodent liquids (solvent, corrosive, detergent…).
-Don't pick up inflammable or explosive substance such as gasoline or alcohol.
-Don't pick up/ vacuum burning or glowing objects (cigarettes, matches, hot ashes).
0345 604 0105 7
8
Electrical
!
vacuum cleaner
Vacuum cleaner
vacuum cleaner
10 vacuum cleaner
Components Vacuum cleaner
1.
Cleaning head 2.
Telescopic tubes 3.
Tube socket 4.
Dust container 5.
Dust container release button 6.
Power button 0345 604 0105 vacuum cleaner 11
Model no Specification V8211_03 230V 50/60Hz 600W Annual energy consumption Hard floor A C Carpet Dust re-emission class E F
Accessories
1 1.Telescopic tubes 2.Tube socket 3.Dusting brush 4.Crevice tool 5.Cleaning head 2 4 5 3 12 vacuum cleaner
vacuum cleaner
Unpacking
Lightweight Bagless Vacuum cleaner
14
ASSEMBLY
Always disconnect the appliance from the mains socket before assembling or disassembling accessories.
1. First connect the tube socket with unit .
2. Insert telescopic tube into the tube socket at the front of the cleaner until you hear a click. 3. Push forward the switch on the telescope tube.Pull the tube to desired length.Then release the switch to lock the telescope tube in place 4. Attach the cleaning head to the end of the telescopic tube.
5. Assemble of part is completed.You can use the product To remove the cleaning head and tubes, hold each piece tightly and pull firmly apart.
To remove the tube socket whilst keeping the from the cleaner, tube socket button pressed, pull the release tube socket out of the front of the cleaner and then release the button. vacuum cleaner
vacuum cleaner
vacuum cleaner
First use of vacuum cleaner
CAUTION : Always switch off the vacuum cleaner before connecting or disconnecting the hose/atlachments or removing and emptying the dirt container.
IMPORTANT : The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum deaner does overheat. the thermostat will automatically turn the vacuum cleaner off. If this happens ,switch the vacuum cleaner off and unplug from electrical socket. Remove and empty the dirt container also check the vacuum deaner for blockages. Allow the vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters ,please wait 24 hours for the filters to fully dry before putting back into the machine).
16 Using your vacuum cleaner
Using the vacuum cleaner Operation
Plug the appliance into the mains socket.
Press the power button on top of the appliance to switch on the appliance.
With handheld feature, you can clean from floor to ceiling.
Advanced functions/use
Remove the cleaning head from the tubes then attach the crevice tool to the tubes. You can also attach the crevice tool directly to the front of the cleaner until a click is heard. The crevice tool is used for narrow gaps and hard-to-reach places. Use this crevice tool to vacuum down the side of cushions, corners, edges or small spaces.
Using on wall/curtains
Use the dusting brush by attaching it to the crevice tool to clean more delicate surfaces, e.g. curtains.
Using on carpet/floor brush
Position1: Bristles extended for hard floors Position2:Bristles retracted for carpets
Use on the stairs
This machine can be used on stairs.
just connect accessories:tube socket, crevice tool and dusting brush 0345 604 0105 Using your vacuum cleaner 17
Cleaning
Always switch off the appliance and unplug from the mains socket before carrying out any maintenance or cleaning.
Clean the outside of the appliance with a damp cloth. Dry thoroughly before use. Never immerse the appliance in the water. Do not use abrasive or chemical cleaning agents. Empty the Dust Container Empty the dust container when the dust reaches the MAX line.
Failure to do this will impair the efficiency of the cleaner.
1. Press the dust container release button to remove the dust container.
2. Hold the dust container over a bin and then push the latch downward to open the cover on the bottom of the dust to allow the dust fall out to bin. 20 3. After empty the container,close the cover until the click sound created from the latch is heard.
Care and maitenance
Cleaning the HEPA Filter
The high efficiency particulate air (HEPA) filter is an effective system in removing almost all indoor pollutants, dust mites, pollen and mould spores.
Filters require cleaning at least every 3-6 months(depending on the level of use). Don't use your vacuum cleaner without all the filters in place.
1. Pull the clip on the dust container lid outward to remove the lid. 2. Hold the handle of the HEPA filter to rotate it anticlockwise and remove it.
3.
Tap the HEPA filter over a bin to remove the dust.
4. Rotate the filter housing anticlockwise and remove it out of the dust container.
5.
Wash the filter under water (max. 40 degree). DO NOT USE DETERGENTS to clean all parts. Leave it to dry for 24 hours or until fully dry before placing back in the vacuum cleaner. 6. Place the filter housing into the dust container and turn it clockwise until it locks into position.
7. Place the filter in the housing and then turn it clockwise until it locks into position.
8. Replace the dust container lid onto the dust container . 9. Attach the dust container back to the appliance until a click is heard.
0345 604 0105 21
22
Technical Specifications
Model Number Voltage Energy efficiency class V8211_03 220-240V~50/60Hz A Annual energy consumption Carpet cleaning performance class Rated input power 24.4kWh/annum E Hard floor cleaning performance class C Dust re-emission class F Sound power level 80dB(A) 600W
24
TROUBLESHOOTING
Please check the following details before you have your appliance repaired by an authorised servicing agent. 1. Vacuum cleaner does not work.
You can check if the power plug is firmly inserted into the power outlet. And if the power switch of the appliances is on.
2. Suction power becomes weak.
You can check if the brush or tube is clogged or damaged . Or check if the dust container is full or check if the filter is clogged and if the tubes are correctly attached. The possible solution is to immediately remove the obstruction. Or empty the dust container or clean the filter or reassemble the tubes.
3. Vacuum cleaner is overheating You can check if the filter is blocked. The possible solution is to clean the filter.
4. Dust is coming out of the vacuum cleaner You can check if the dust container is properly fitted to the cleaner. The possible solution is to refit the dust container to the cleaner.
Help and assistance
wash vacuum cleaner 0345 604 0105 0345 604 0105 25
26 2014/35/EU low voltage directive 2014/30/EU the EMC directive 2011/65/EU the ROHS directive This is a class ll appliance.
0345 604 0105 27
0345 604 0105
![](http://s3.manualzz.com/store/data/052350901_1-b05e59e67b0bab77012e07521004d7fe-210x147.png)
Advertisement