RTS Odin Data Sheet

RTS Odin Data Sheet
Technical Data Sheet
In n o v at i n g t h e F u t u re o f Gl o b al C o m m u n i c a t i o n s
ODIN
OMNEO Digital Intercom
The ODIN Digital Intercom is a highly scalable intercom system in a 1RU (Rack Unit) package. As your capacity evolves, a single ODIN can
grow from 16 ports to a maximum of 128 ports. Up to eight ODIN frames can be interconnected via optical Inter-Frame Links creating a single
matrix with up to 1024 ports. The total number of licensed ports may be allocated freely to any port hardware type supported by the unit.
The front panel has been designed to incorporate a User Interface as an alternative option to AZedit that supports the most common setup and
configuration tasks.
Featuring connectors for AIO, RVON, OMNEO and TW (two-wire) technology, ODIN supports keypanel technology going forward and, as
always, RTS legacy keypanels. OMNEO is standard on RJ-45 connectors or is available using optional Optical Fiber SFP connectors.
Features
•
A robust digital matrix in a compact 1RU space
•
Built-in OMNEO technology
•
Redundant power supplies
•
Front panel user interface gives easy access to the most common
configuration tasks to allow quick modifications to the system
•
Energy-efficient design, uses less than 50 W of power
Line Drawing
J1
J2
J5
J6
J7
In n o v at i n g t h e F u t u re o f Gl o b al C o m m u n i c a t i o n s
Specifications
Power Supply:
Type....................Locking IEC 320 C14 style connector
(2 connectors, fully redundant
load-sharing power supplies)
AC Input...................... 100 VAC – 240 VAC, 60/50 Hz,
0.5 A / 0.35 A
Maximum Power
Consumption....................... 47 W (based on 120 VAC)
Note:
Lighted power buttons on front panel control
DC voltage feed to internal circuitry; they do
not disconnect AC from the internal power
supplies. Power cords must be fully removed
from unit to safely disengage internal power.
Environmental:
Operating
Temperature................... 32° F – 113° F (0° C – 45° C)
Storage
Temperature.................-4° F – 158° F (-20° C – 70° C)
Unbalanced Operation (RTS/Clear-Com)
Expected Termination Impedance....................... 200 Ω
Noise Contribution.......................................... <-70 dBu
THD+N (w/ nominal input)..... <0.5%, 200 Hz – 7.3 kHz
Bridging Impedance.......................................... >10 kΩ
CALL Signaling.............................. 20 kHz (RTS mode)
12 VDC (Clear-Com mode)
MIC KILL Signaling
24 kHz (RTS mode)
Balanced Operation (Audiocom)
Expected Termination Impedance....................... 300 Ω
Noise Contribution.......................................... <-70 dBu
THD+N
(with nominal input)............... <0.5%, 200 Hz – 7.3 kHz
Bridging Impedance.......................................... >10 kΩ
CALL Signaling..................... 20 kHz (Audiocom mode)
MIC KILL Signaling............... 24 kHz (Audiocom mode)
General Purpose Input/Output Ports:
OMNEO Port (primary and secondary):
Maximum Capacity...................... 128 Full-duplex ports
Copper Connector Type...................................... RJ-45
Format........................................ IEEE 802.3 compliant
Copper Ethernet Speed........................ 100/1000 Mbps
LEDs.........................................Speed and Link/Activity
Fiber Connector Type..................................Small Form
Factor Pluggable (SFP)
Multimode.............................. Finisar FTLF8519P3BNL
500m / 2.125Gbps
Single Mode...........................Finisar FTLF1421P1BTL
15km / 2.67Gbps
Fiber Speed........................................... 100/1000Mbps
LEDs.........................................Speed and Link/Activity
LED Indicator............................. Optical Signal Present
Note:
SFF-8472 fiber diagnostics supported
RVON
Compression Bit Rate Coding
Delay
Relays (4 Relays)
Dimensions:
Type..................................................................... SPDT
19" w/ rack ears (17.3" w/o rack ears) W x 1.7" H x 14.3"
Contacts................................................... Common (C)
D (including connectors)
Normally Closed (NC)
(482.6 mm w/ rack ears [439 mm w/o rack ears] W x 43.7
Normally Open (NO)
mm H x 363.5 mm D [including connectors])
Contact Rating........................................ 1A @ 48 VDC
Weight:
ODIN frame......................................... 11.5 lbs (5.2 kg)
Optional Mounting Bracket........... 0.86 lbs (390 grams)
AIO 4-Wire Analog:
Connectors...................................16 RJ-45 connectors
Signal Format.................. Differential RX/TX audio with
differential RS-485 control data
Wiring Scheme............. Both 568B & USOC supported
A/D and D/A Resolution...................................... 24 bits
Max Input Level (balanced)..........+20 dBu w/o clipping
Digital Input Gain................................... Programmable
(-20 dB – +20 dB)
Input Frequency
Response.............+1 dB/-3 dB from 100 Hz – +20 kHz
THD+N (8dBu input,
unity gain)...................... 0.025% non-weighted@1 kHz
<0.075% non-weighted, 100 Hz – +20 kHz
Nominal Input Impedance................................. >22 kΩ
Nominal Output Level...........................................8 dBu
Digital Output Gain................................ Programmable
(-20 dB – +20 dB)
Maximum Output
Level (balanced) @ 600 Ohms.......20 dBu w/o clipping
Output Frequency
Response........... +1 dB / -3 dB from 100 Hz – +20 kHz
Output Noise Floor......................................... <-70 dBu
Crosstalk Isolation............................................. >80 dB
2-Wire Party Line Analog:
Connector.................two 3-pin female XLR connectors
Modes/Port supported.................. RTS CH1, RTS CH2
Audiocom (1 channel)
Clear-Com (1 channel)
4W/2W Echo Return Loss................................. >45 dB
Inputs (4 Inputs)
Type...................................................Optically Coupled
Input Voltage........................... 5 VDC – 12 VDC on A+
Note:
A+ is internally pulled to +5 VDC. Connect Kto chassis ground to activate.
PAP/LCP/GPIO Port:
Connector............................................................ RJ-45
Format.................. RS-485 control data only (no audio)
Inter-Frame Link Port
(2 UPLINK/2 DOWNLINK):
Note:
Supports expansion and connection of up to
eight ODIN frames.
Fiber Connector Type..................................Small Form
Factor Pluggable (SFP)
Multimode.............................. Finisar FTLF8519P3BNL
500m / 2.125 Gbps
Single Mode...........................Finisar FTLF1421P1BTL
15km / 2.67 Gbps
Speed................................................................ 2 Gbps
LED Indicator............................. Optical Signal Present
Note:
SFF-8472 fiber diagnostics supported
Control Port:
Connector............................................................ RJ-45
Format........................................ IEEE 802.3 compliant
Speed.............................................. 10/100/1000 Mbps
LEDs.........................................Speed and Link/Activity
Sync Input Port:
Connector.............................................................. BNC
Termination Impedance......................................... 75 Ω
Input Frequency Range.......................48 kHz ±25 ppm
Input Level...................................... 5V TTL Compatible
G.711
Playout
Delay
Bandwidth
64 kbps 125 μs 20-60 ms 160-224 kbps
Sample
Rate
8k
G.729AB
8 kbps
10 μs 20-120 ms 32-112 kbps
8k
G.722
64 kbps
4 μs
16k
20-60 ms 160-224 kbps
* Data rate depends codec selection
Note:
The Playout Delay and Bandwidth depend on
the configured amount of audio per packet.
TFT Display:
Active Area......... 120.10 mm (wide) x 18.77 mm (high)
Dot Resolution.......................................576 x 90 pixels
Color Resolution........................16-bit (64K) RGB color
View Angle............................80° (typical, all directions)
Protective Lens....................Anti-Glare / Anti-Reflective
Front Panel Management Port:
Connector............................................................ RJ-45
Format........................................ IEEE 802.3 compliant
Speed.............................................. 10/100/1000 Mbps
LEDs.........................................Speed and Link/Activity
Agency Compliance:
Emissions (Class A)
•
•
•
•
•
•
•
EN 55032:2012/AC:2013
KN32 w RRA Public Notification 2016-26 & RRA Announce 2016-79
AS/NZS CISPR 32:2015
VCCI-CISPR 32:2016
ICES-003, Issue 6:2016, Updated April 2017
FCC Part 15 Subpart B
Chinese National Standard 13438 (2008)
Immunity
•
•
EN55024:2010
KN32 w RRA Public Notification 2016-26 & RRA Announce 2016-79
Safety
•
•
•
UL 60950-1 and CAN/CSA C22.2 No.60950-1-07
UL 62368-1
Japanese PSE compliance
Order Information
Order No.
Description
Order No.
Description
ODIN16NOCORD
ODIN32NOCORD
ODIN 16 no cord
ODIN16PORTUPG
ODIN 16 port upgrade
ODIN 32 no cord
OM-SM SFP ODIN
Fiber module single mode ODIN
ODIN64NOCORD
ODIN 64 no cord
OM-MM FIBER
Multimode fiber module
ODIN128NOCORD
ODIN 128 no cord
The specification information is subject to change without notification. Brand names mentioned are the property of their respective companies.
Bosch Security Systems, Inc. | 12000 Portland Avenue South | Burnsville, Minnesota 55337
Form Number: F.01U.345.089 Rev 06
Date: April 2019
w w w. r ts in te r c o ms . c o m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement