KYOCERA ECOSYS P5021cdn/P5021cdw/M5026cdn/P5026cdw Card Authentication Kit (B) Guide

KYOCERA ECOSYS P5021cdn/P5021cdw/M5026cdn/P5026cdw Card Authentication Kit (B) Guide
PRINT
ECOSYS P5021cdn
ECOSYS P5021cdw
ECOSYS P5026cdn
ECOSYS P5026cdw
Card Authentication Kit (B)
OPERATION GUIDE
Card Authentication Kit (B) Operation Guide
Introduction
Activation of Card Authentication Kit(B)
Thank you for purchasing our Card Authentication Kit (B).
Activate the ID CARD from the operation panel on the
machine.
This product enables you to use the ID card user
authentication system.
1
Press the Menu key.
Precautions
2
Press the ▲ or ▼ key to select [Op Functions] and
then press the ► key.
To install the optional function, you need the License Key.
Please access the designated website of your dealer or
service representative, and register “Machine No.”
indicated on your machine and “Product ID” indicated on
the License Certificate supplied with the product to issue
the License Key.
3
Enter the administrator ID using the arrow keys and
then press the OK key.
NOTE:Press the ▲ or ▼ key to increase or decrease,
respectively, the value at the blinking cursor. Enter the
specified ID. Press the ◄ or ► key to move the cursor left or
right. Enter an ID consisting of between 1 and 16 numbers.
To enter your login user name and login password, refer to
the machine's Operation Guide.
For ID card reading, refer to the instructions of the card
reader.
To make authentication using your ID card, you need to
register the ID card information in the KYOCERA Net
Manager’s users list. For registration procedure, refer to the
KYOCERA Net Manager Install Manual.
4
Enter the administrator password using the arrow keys
and then press the OK key.
NOTE:Press the ▲ or ▼ key to increase or decrease,
respectively, the value at the blinking cursor. Enter the
specified password. Press the ◄ or ► key to move the
cursor left or right. Enter a password consisting of between
0 (no settings) and 16 numbers.
To enter your login user name and login password, refer to
the machine's Operation Guide.
Installation of KYOCERA Net Manager
To use Card authentication, KYOCERA Net Manager must
be installed on the network authentication server. Refer to
the KYOCERA Net Manager Install Manual for information
on the installation method.
Creating Local Users and entering ID
numbers
For Card authentication, the user must be registered and
the ID card's ID number must be entered in the KYOCERA
Net Manager. Refer to the KYOCERA Net Manager Install
Manual for details.
Connecting the USB cable
5
Press the ▲ or ▼ key to select [ID Card Activate] and
then press the ► key.
6
Press the OK key.
7
Press the ▲ or ▼ key to select [Official] and then press
the OK key.
NOTE: To use the application as a trial, select [Trial] and
then press the OK key.
Connect the USB cable of ID card reader to the USB
memory slot on the machine.
8
Enter the Licence Key using the arrow keys and then
press the OK key.
NOTE: Press the ▲ or ▼ key to increase or decrease,
respectively, the value at the blinking cursor. Enter the
specified password. Press the ◄ or ► key to move the
cursor left or right.
Some applications do not require you to enter a license key.
If the license key entry screen does not appear, go to Step 9.
9
When the confirmation screen appears, press [Yes]
(Left Select key).
IMPORTANT: If you change the date/time while using an
application, you will no longer be able to use the application.
1
Setting User Login
Login
Make the settings of Netwk Authentic. of User/Job Account
on the machine.
After installing the Card Authentication Kit (B) and setting
User Login, Use ID card to login. will appear when you use
the machine.
NOTE:For User Login setting, refer to the Operation Guide
of the machine.
When you enable User Login on the machine, you need to
make the setting of user account for the printer driver in
order to print by the computer. For details, refer to the
Printer Driver User Guide, Device Settings, and
Administrator Settings.
To login, hold the ID card over the ID Card Reader.
Caution: To read an ID card, bring the card within 10 mm of
the ID card reader.
Do not attempt to read two ID cards at once.
Key Login
You can login by entering the administrator password and
administrator password without using the ID card.
NOTE: You can make the login permission or prohibition
setting. For the setting procedure, refer to Key Login
setting.
This function can only be used when the administrator logs
in.
Follow the steps below.
1
Press the ► key.
2
Enter the administrator ID using the arrow keys and
then press the OK key.
NOTE:Press the ▲ or ▼ key to increase or decrease,
respectively, the value at the blinking cursor. Enter the
specified ID. Press the ◄ or ► key to move the cursor left
or right. Enter an ID consisting of between 1 and 16
numbers.
3
Enter the administrator password using the arrow keys
and then press the OK key.
NOTE:Press the ▲ or ▼ key to increase or decrease,
respectively, the value at the blinking cursor. Enter the
specified password. Press the ◄ or ► key to move the
cursor left or right. Enter a password consisting of between
0 (no settings) and 16 numbers.
To return to the Use ID card to login. screen, press the
Cancel key.
Logout
After completing the procedure, press the Logout key on
the control panel.
2
Key Login setting
Responding to Error Messages
You can make the Key Login permission or prohibition
setting.
If the panel displays any of these message, follow the
corresponding procedure.
Follow the steps below.
Error Message
Corrective Actions
1
Cannot recognize.
Make sure your ID card has been
registered.
Cannot read data in
this ID Card.
In registration process, the ID card
information was not read correctly. Hold
again the ID card over the ID card
reading part.
If the same message still appears, the
ID card may not be compatible with this
product. Change it to another ID card.
Select the [Menu] in the ID card login screen.
NOTE:When the Card authentication settings have been
completed, the Use ID card to login. screen appears. Refer
to Login or the procedure of Key Login, and login using the
ID card registered with administrator privileges or using the
administrator ID.
2
Press the ▲ or ▼ key to select [User/Job Account],
and then press the ► key.
3
Enter the administrator ID using the arrow keys and
then press the OK key.
NOTE:Press the ▲ or ▼ key to increase or decrease,
respectively, the value at the blinking cursor. Enter the
specified ID. Press the ◄ or ► key to move the cursor left
or right. Enter an ID consisting of between 1 and 16
numbers.
4
Enter the administrator password using the arrow keys
and then press the OK key.
NOTE:Press the ▲ or ▼ key to increase or decrease,
respectively, the value at the blinking cursor. Enter the
specified password. Press the ◄ or ► key to move the
cursor left or right. Enter a password consisting of between
0 (no settings) and 16 numbers.
5
Press the ▲ or ▼ key to select [User Login Set.], and
then press the ► key.
6
Press the ▲ or ▼ key to select [Key Login] and then
press the OK key.
7
Press the ▲ or ▼ key to select [Permit] or [Prohibit]
and then press the OK key.
3
First edition 2016.4
3MT2RBKDEN0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement