Prestigio DVR RoadRunner 400GPS Manual
Add to my manuals10 Pages
Prestigio RoadRunner 410 GPS is a feature-rich dashcam that offers Full HD video recording, GPS tracking, and a range of safety features to enhance your driving experience and protect you on the road. With its 140-degree wide-angle lens, it captures a clear and expansive view of the road ahead, ensuring you don't miss any crucial details.
advertisement
Car Video Recorder
RoadRunner 400GPS, 410GPS
User Manual
Version 2.0
www.prestigio.com
About this user manual
This user manual is specially designed to detail the device’s functions and features.
-
Please read this manual before using the device to ensure safe and proper use.
- -
Descriptions are based on the device’s default settings.
Prestigio continuously strives to improve its products. Due to software upgrading, some contents in this user manual may be different from your product. Prestigio reserves the rights to revise this user manual or withdraw it at any time without prior notice. Please take your product as standard.
Conventions used in this manual
In this user manual, we use the following symbols to indicate useful and important information:
Caution
: provides safety precaution and important information.
Note
: gives additional information.
Tips
: usage tips. > The order of options or menus you must select to perform a step. © Copyright 2018 Prestigio. All rights reserved.
7.
1.
2.
3.
4.
5.
6.
Contents
Unboxing ................................................................................................................. 1
Inside your package ........................................................................................................................... 1
Getting started........................................................................................................... 2
Insert a microSD card ........................................................................................................................ 2 Mount to Windshield ......................................................................................................................... 2 Charge the battery.............................................................................................................................. 2
Settings ................................................................................................................. 3
Video settings....................................................................................................................................... 3 Picture settings .................................................................................................................................... 3 General settings ................................................................................................................................... 4
Recording ................................................................................................................. 5
Record a video ..................................................................................................................................... 5
File management ....................................................................................................... 5
Browse files .......................................................................................................................................... 5 Delete a file .......................................................................................................................................... 5 Lock and unlock a file ........................................................................................................................ 5
Specifications ............................................................................................................. 7
• Car video recorder • Mount
Device overview
• Car charger • Quick start guide
4 User Manual | RoadRunner 400-410GPS 1
2. Getting started
Insert a microSD card
Before starting video recording, please insert a microSD card (not included) into the slot until it locks in place. The device will automatically recognize it as default storage and all the data will be saved on this card.
Mount to Windshield
1.
2.
3.
Attach the bracket to the device. Slide and push until the connection is firm.
With the suction cup laying flat, position the suction-cup on the windshield. Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield. Make sure the base is securely locked in place.
Warning
: Do not install the device on a tinted window. Doing so may damage the tint film.
Charge the battery
Before using the device for the first time, please fully charge the Li -ion battery. The battery will be completely charged in 1-2 hours. • • Using the car charger: charge the device through cigarette lighter. The device will start charging after the car engine is turned on. Using mini USB cable: connect the device to AC 5V adapter or the USB port of a computer/laptop.
5 User Manual | RoadRunner 400-410GPS 2
3.
Settings
your requirements. Before recording, you can set up the device according to
-
In preview mode, press [MENU] to enter settings, then pressing [MODE] one can to go to MOVIE settings, PICTURE settings, PLAYBACK mode, SD tool, General settings and E dog settings, press [MENU] to exit.
-
In setting list, use [ ▲ ]/[ ▼ ] to navigate the menu, press [OK] to get the options and confirm the selection.
• • • •
Video settings
•
Resolution:
Select the resolution of recorded video: FHD 1920 x 1080, 720P 1280x720, WVGA 848 x 480.
Loop recording:
automatically. Set the video duration (1 , 3, 5 minutes or off) for loop recording. When the microSD card is full, the device will delete the oldest unlocked video file •
WDR:
Off/On. Turn on or off Wide-dynamic-range.
White Balance:
Auto, Daylight, Cloudy, Tungsten, Fluorescent. Select an appropriate white balance, so images have a true-to-life color range. It is for specific lighting situations.
Motion Detection:
is supplied. Off, Low Level, Middle Level, High Level. DVR automatically starts recording when motion is detected in front of camera. Recording stops when there is no movement any more but a delay of 15-20 seconds. The function works only when power
Record Audio:
Off/On. Set to record sound or not.
• •
Date Stamp:
Off/On. Add date stamp onto videos.
G-sensor:
Off, Low Level, Middle Level, High Level. Select the sensitivity of the G automatically protected when collision, shake or emergency braking occurs. -sensor. The smaller the number is, the higher the sensitivity is. A recording video file becomes
PICTURE SETTINGS
•
Resolution:
Select the picture image size from 3MP, 2MP, 1.2MP, VGA. • •
Quality:
Set the photo quality Fine/Normal/Economy.
White Balance:
Select an appropriate white balance, so images have a true-to-life color range. It is for specific lighting situations. Auto, Daylight, Cloudy, Tungsten, Fluorescent. •
ISO:
Set the ISO Auto/100/200/400.
6 User Manual | RoadRunner 400-410GPS 3
GENERAL SETTINGS Date/Time:
Set date and time on device.
Beep Sound:
O ff /On. Turn o ff /on beep sound.
Stamp Date:
O ff /On. Add date stamp onto videos.
Stamp Time:
O ff /On. Add time stamp onto videos.
Language:
Choose your language.
Frequency:
50Hz, 60Hz. For a given luminance, the frequency of light fluctuation that evokes a sen sation of flicker. Set a right flickering frequency to avoid horizontal stripe interference.
Shutdown backlight:
Adjust the backlight time Off/30 seconds/1 Minute/3 Minutes.
Anti-Shaking:
Off/On.
Format SD:
Format the memory card. Formatting will erase all your stored data. Back up your data before proceeding.
Default Setting:
Restore to default settings.
Version:
Display the current FW version.
7 User Manual | RoadRunner 400-410GPS 4
4.
Recording
Record a video Auto video recording
Connect the device to car charger, when the car engine launches, the device will automati cally turn on and start loop video recording. When shut off the car engine, the device will save the last file and turn off.
Manual video recording
In video preview mode, press [OK] button to start and stop video recording.
Record the sound
In preview mode or recording mode, press [ ▼ ] to turn on or off the microphone.
Lock a recording video
During recording, press [MODE] to lock the video.
LCD off
During recording, press [DISP] to make LCD's backlight automatically be off.
Take a picture
Press [MODE] to select the picture mode, and then press [OK] to take photos.
5. File management
You can manage your videos and pictures in playback mode.
Browse files
1. In video preview mode, press [MODE] two times to enter the playback mode. 2. Press [ ▲ ]/[ ▼ ] to scroll through the files.
Delete a file
Press [MENU] to delete one file or all the files, and press [OK] to confirm the deletion. To delete a protected file, remove the protec ti on first.
Lock and unlock a file
Press [MENU] to protect or unprotect the selected file or all.
8 User Manual | RoadRunner 400-410GPS 5
6. Playback
Play video on DVR
1. In playback mode, press [ ▲ ]/[ ▼ ] to scroll through the files.
2. 3. 4. Press [OK] to start/Pause playback. Press [OK] again to stop playing. Press [MENU] again to exit playback mode.
Playback on PC
Remove memory card from DVR and insert it into co mputer’s card reader.
6
DVR’s USB port is for charging purpose only.
9 User Manual | RoadRunner 400-410GPS 6
7.
Specifications
Display Processor Image sensor View angle
2.0", 480x240 pixels MSC8328P 2 MP CMOS GC2023 140° 1920x1080@30FPS
Video resolution
1280x720@30FPS 640x480@30FPS
Photo resolution
3MP
Video format
AVI
Picture format
JPG
Memory Microphone Features Power source Interfaces Operating temperature Dimension Weight
64 MB, Micro SD/SDHC up to 128 GB (class 10) Built-in WDR, GPS, Lane Departure Warning System, Front Collision Warning System, Radar POI, G-Sensor, Motion Detection, Cyclic Recording Super Capacitor, Car charger Mini USB 2.0 -10°C ~ 60 °C 63x52.5x33 mm (H x W x D) 60g
10 User Manual | RoadRunner 400-410GPS 7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project