Hunter Bennett Low Profile Owners Manual

Hunter Bennett Low Profile Owners Manual

Model: 50280 Matte Fresh White 53393 Matte Black 53394 Brushed Nickel Fan weight ±2 lbs: 20.3 lbs (9.2 kg)

Bennett Collection

Installation Manual

©2019 Hunter Fan Co.

M3647-01 r061819

1886

Congratulations on purchasing your new Hunter

®

ceiling fan!

The ceiling fan you purchased will provide comfort and performance in your home or office for many years. This instruction manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

We are here to help!

This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction Manual, keep your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are unfamiliar or uncomfortable with wiring, contact a qualified electrician. We also provide telephone support at 1.888.830.1326 or visit us at HunterFan.com.

READ and SAVE These Instructions WARNING

1886

Warning

w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

w.5 - Chemical burn hazard. Keep batteries away from children. This remote contains a lithium button cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Dispose of cells properly and keep away from children. Even used cells may cause injury.

Caution

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Hunter replacement parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

Caution: modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product conforms to UL Standard 507.

Here are the tools you’ll need to complete your installation:

OPTIONAL

If mounting to a support structure, you will also need these tools.

Ladder Screwdriver Drill 9/64” Drill Bit

2

Pliers Wire Strippers Here is what comes in your box:

Here is what comes in your box: We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.

Hunter Pro Tip:

Do not discard the hardware bags or mix parts from different bags. Make note of the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.

1886

Ceiling Bracket

x2

Wood Screw

bag

Washer

x2 For installing the hanger bracket and wiring the fan

Wire Nut

x4

Locking Screw

x2 bag

Motor Housing Screw

x4 For installing the housing

Motor

bag

Grommet

x15 bag

Blade Screw

x15

Blade

x5 For installing the blades

Blade Arm

x5 bag x10

Blade Arm Screw Light Fixture Motor Housing

bag

Spare Parts For your convenience, you may receive extra fasteners.

Remote

Glass Bulb

x1 For installing the light kit

Find a part that is missing or damaged?

Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.

3

1886

Choosing the Right Installation Location You probably bought this fan with a location in mind. Let’s check below to make sure it is a good fit.

Check the room dimensions: Check the outlet box: 30 inches

from blade tip to nearest wall or obstruction

7 feet

from bottom edge of blade to the floor

Installing the Ceiling Bracket You have two options for installation. Pick which one works best for your location.

ow er

Do this first!

WARNING

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location.

.

ed a ch Ma ke s ur e a ll f ou r bu s e p m

You must be able to secure the fan to building structure or fan-rated outlet box.

Washer

x2

Option 1:

Machine Screws

Use machine screws (pro vided with outlet box) when securing to existing ceiling fan-rated outlet box. Make sure it is securely installed and is acceptable for fan support of 31.8 kg (70 lbs) or less.

Hunter Pro Tip:

The machine screws are the ones that came with your outlet box.

4 Ceiling Bracket Hanging Fan Wiring Motor Housing Blades

Option 2:

Wood Screws

Use wood screws (included) when securing to support structure with approved electrical outlet box. Drill 9/64” pilot holes in support structure to aid in securing ceiling bracket with hardware found in the hardware bag.

bag x2

Wood Screw

Light Remote Troubleshooting

Hanging the Fan Wiring the Fan

Check the outlet box: Installing the Ceiling Bracket

1

Hanging the Fan

2 bag

Locking Screw

x2 While holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling bracket. Be sure the ground wire attached to the hanger faces out of the large opening in the ceiling bracket.

NOTICE

To prevent damage to fan, ALWAYS lift holding either the fan housing or the downrod.

Once the motor is in the ceiling bracket, use the two locking screws found in the hardware bag to secure the motor to the ceiling bracket.

Wiring the Fan We know wiring is hard. Let’s make it easier.

Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician.

Hunter Pro Tip:

Have a single switch?

Follow these steps:

Here is how to connect the wires:

Push the bare metal ends of the wires together and slide a wire nut over them. Then, twist the wire nut clockwise until tight.

Give it a gentle pull to make sure none of the wires are loose.

Connect the three grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling and hanging bracket.

G r ee n / Ye l lo w St i r p e G r ee n / Ye l lo w St i r p e Grounding Grounded Connect the white (grounded) wire from the ceiling to the white wire from the fan.

Blue White Ungrounded Black Connect the black wire (ungrounded) from the ceiling to the black wire from the fan. Cap the blue wire from the fan. It will not be used for single switch wiring.

bag

Wire Nut

x4

Have dual switches?

Follow these steps:

WARNING

All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring or in doubt, consult a qualified electrician.

Hunter Pro Tip:

Have extra wiring?

Turn the wires upward and push them carefully back through the hanger bracket into the outlet box. Make sure that the wires are still attached to the wire nuts.

Grounded White Ungrounded Connect the white (grounded) wire from the ceiling to the white wire from the fan.

Connect the second ungrounded (light) wire from the ceiling to the blue wire from the fan.

Connect the three grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling and hanging bracket.

Ungrounded (light) Blue G r ee n / Ye l lo w St i r p e G r ee n / Ye l lo w St i r p e Grounding Ceiling Bracket Hanging Fan Wiring Motor Housing Blades Black Light Connect the black wire (ungrounded) from the ceiling to the black wire from the fan. Remote bag

Wire Nut

x4 Troubleshooting 5

1886

1886

1

Installing the Motor Housing

Notch 2 Indentation Raise the motor housing up over the motor and ceiling bracket. Turn the motor housing so the screw holes align and the indentation in the housing locks into place with the notch in the ceiling bracket.

leave unattended.

The motor housing is not secured until the next step is complete. Do not

With a Phillips head screwdriver, install the four motor housing screws found in the hardware bag. Tighten all four screws securely.

Insert grommets found in the hardware bag into the holes in the blades, then secure each blade to a blade iron with screws found in the hardware bag.

Installing the Blades:

bag x4

Motor Housing Screw

bag x15

Blade Screw

bag

Grommet

x15

Repeat x5

Lightly attach the blade irons to the motor with screws found in the hardware bag, then securely tighten after both screws are attached.

bag x10

Blade Arm Screw

Repeat x5

6 Ceiling Bracket Hanging Fan Wiring Motor Housing Blades Light Remote Troubleshooting

Assembling the Light Installing the Bulb and Glass

Remove the cardboard plug guard before proceeding!

Connect the plugs from the fan and light fixture. Make sure to line up the colored markings on the connectors.

HOLD HERE

Assembling the Light

Push the connector and excess wire into the hole at the top of the light fixture.

IMPORTANT

The connector and excess wiring must be pushed into the light fixture in order to successfully mount the light fixture to the fan.

Raise the light kit to the bottom of the fan. Align the notch on the mounting ring on the top of the light kit with the pin in the mounting bracket on the bottom of the fan.

Notch Pin

1886

Some components not shown for visual clarity.

Blade Screw Grommet

Need a little more help with assembling this light? Visit our light kit video at:

http://bit.ly/HunterQuickConnect

Installing the Bulb and Glass

Hold the fan body stationary and rotate the light fixture clockwise to engage the locking pin.

Blade Arm Screw

Repeat x5

Ceiling Bracket Hanging Fan Wiring Lift the glass and attach it to the light fixture using the three thumbscrews. Tighten all three screws securely by hand.

Motor Housing Install the included bulb into the socket. When necessary, replace with bulb of same wattage.

WARNING

GLASS FALL HAZARD

To prevent SERIOUS INJURY or DEATH , make sure that glass is properly secured.

Blades Light Remote

ow

ON

er

Troubleshooting 7

1886

Installing the Remote Control Cradle The remote control is already paired for use. For your convenience, a remote function card is packed in with your remote.

You have two options for installing the remote cradle.

Choose which path works best for you.

Option 1: Using Adhesive Strip Option 2: Using Screws

Remove the cradle from the cradle bracket.

Separate the lining from the back of the adhesive strip on the cradle bracket.

Press the cradle bracket against the wall and hold firmly for 30 seconds.

Choose your cradle installation location.

If you are installing into drywall, drill two 9/64 width holes using the cradle bracket as a guide. Gently hammer the included drywall anchors into the pre-drilled holes.

Slide the cradle onto the mounted bracket.

Troubleshooting

Fan Doesn’t Work

• Make sure power switch is on.

• Check the circuit breaker to ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.

Excessive Wobbling

• Make sure the blades are properly installed on the blade iron posts.

• Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.

• Use the provided balancing kit and instructions to balance the fan.

Remote Control of Fan is Erratic

• Make sure the battery is installed correctly.

• Install a fresh battery.

Remote Only Works Close to Fan

• Change battery.

Noisy Operation

• Make sure the blades are properly installed.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

Multiple Remote Issues

• If you have multiple remotes or multiple remote controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to www.HunterFan.com/FAQs and click “How do I properly install multiple remote-controlled fans?” for information on how to correct this issue.

Hunter Pro Tip:

Cleaning the Fan

Use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

8 Ceiling Bracket Hanging Fan Wiring Motor Housing Blades Light Remote Troubleshooting

Troubleshooting Limited Lifetime Warranty

Hunter Fan Company grants this limited warranty to the original purchaser of this Hunter ceiling fan. This document can be found at www.HunterFan.com. Thank you for choosing Hunter!

How Can Warranty Service Be Obtained?

Proof of purchase is required

when requesting warranty service. The original purchaser must present a sales receipt or other document that establishes proof of purchase. Hunter, at its sole discretion, may accept a gift receipt. To obtain service, contact Hunter Fan Company online or by phone.

www.HunterFan.com/Support/Contact-Us/ 1-888-830-1326 Please do not ship your fan or any fan parts to Hunter. Delivery will be refused.

What Does This Warranty Cover?

Motor — Limited Lifetime Warranty

If any part of your ceiling fan motor fails during your ownership of the fan due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide you with a replacement fan free of charge.* The foregoing limited warranty applies only to the motor itself and does not apply to electronic controls – such as remote control transmitters, remote control receivers, or capacitors – used in conjunction with the motor. Such electronic control items are included in the one-year limited warranty below.

Other — One-Year Limited Warranty

Except as otherwise indicated throughout this warranty, if any part of your Hunter ceiling fan fails at any time within one year of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.*

Light Kits — Warranty May Vary

Light kits are included in the one-year limited warranty. However, you may qualify for additional warranty coverage if your fan includes one of the following: •

LED Light Kits — Three-Year Limited Warranty

If your LED light kit module (not including glass components) or LED bulb fails at any time within three years of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.*

* If no replacement product/part can be provided for your fan, we will provide a comparable or superior replacement product/part at the sole discretion of Hunter.

What Does This Warranty NOT Cover?

Labor Excluded. This warranty does not cover any costs or fees associated with the labor (including electrician’s fees) required to install, remove, or replace a fan or any fan parts. There is no warranty for light bulbs (except where otherwise noted); remote control batteries; fans purchased or installed outside the United States; fans owned by someone other than the original purchaser; fans for which proof of purchase has not been established; fans purchased from an unauthorized dealer; ordinary wear and tear; minor cosmetic blemishes; refurbished fans; and fans that are damaged due to any of the following: improper installation, misuse, abuse, improper care, failure to follow Hunter instructions, accidental damage caused by the fan owner or related parties, modifications to the fan, improper or incorrectly performed maintenance or repair, improper voltage supply or power surge, use of improper parts or accessories, failure to provide maintenance to the fan, or acts of God (e.g. flood). ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN. HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

How Does State Law Affect Warranty Coverage?

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

1886

9

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement