Hunter Hepburn Owners Manual

Hunter Hepburn Owners Manual
Hepburn
Installation Manual
Model: 50276 Matte White
59320 Modern Brass
59321 Matte Black
59330 Satin Copper
Fan weight ±2 lbs: 17.4 lbs (7.9 kg)
©2019 Hunter Fan Co.
PG3760 r052919
Congratulations on purchasing your new Hunter® ceiling fan!
The ceiling fan you purchased will provide comfort and performance in your home or office for many years. This instruction manual contains
complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the
best ceiling fan available anywhere in the world.
We are here to help!
This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction Manual, keep
your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are unfamiliar or
uncomfortable with wiring, contact a qualified electrician. We also provide telephone support at 1.888.830.1326 or visit us
at HunterFan.com.
READ and SAVE These Instructions
1886
WARNING
Warning
w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the
mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you
cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch.
w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
Caution
c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.
c.2 - Use only Hunter replacement parts.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This product conforms to UL Standard 507.
Here are the tools you’ll need to complete your installation:
OPTIONAL
If mounting to a support structure, you will also need these tools.
Ladder
Screwdriver
Drill
Pliers
1
Wire Strippers
9/64” Drill Bit
1886
Here is what comes in your box:
We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you’ll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
Wood Screw
Hunter Pro Tip:
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
x2
Ceiling Bracket
bag
Washer
x2
Wire Nut
Canopy Screw
x4
x2
Canopy
For installing the hanger bracket and wiring the fan
bag
For installing the canopy
Downrod
x12
bag
Blade
Blade Screw
Motor
x4
x12
bag
Blade Washers
Upper Switch Housing
For installing the blades
Lower Switch Housing
Bulb
Wall Control and Extra Downrod
x1
bag
bag
Spare Parts
For your convenience,
you may receive extra fasteners.
Light Kit Screw
x6
Glass
Remote Receiver
For installing the light kit
Find a part that is missing or damaged?
Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.
M3740-01 r040419
2
1886
Choosing the Right Installation Location
You probably bought this fan with a location in mind. Let’s check below to make sure it is a good fit.
Check the room dimensions:
Check the outlet box:
30 inches
from blade tip to
nearest wall or
obstruction
You must be able to
secure the fan to building
structure or fan-rated
outlet box.
7 feet
from bottom edge
of blade to the
floor
Checking the Ceiling Angle:
Standard Mounting
Support Structure
d
gle
Support
Structure
ng
Mo
ti
un
An
Ceiling
Outlet Box
(required)
Ceiling
Outlet Box
(required)
If you have a flat ceiling:
Hang your fan by a standard downrod. Some fans come
with a shorter downrod for a Low Profile installation.
If you have an angled or vaulted ceiling:
1. You will need a longer downrod. (sold separately at HunterFan.com)
2. If your ceiling angle is greater than 34°, you will also need an
Angled Mounting Kit. (Sold separately at HunterFan.com)
Angled Mounting
A little more information on Angled Mounting:
For optimum performance and appearance, a longer downrod should
be used with your Hunter ceiling fan when installing on high or angled
ceiling. If your ceiling is angled greater than 34° you will also need an
Angled Mounting Kit. Longer downrods and the Angled Mounting Kit are
sold separately at HunterFan.com.
CEILING
Hunter Pro Tip:
Determining if you need an Angled Mounting Kit:
Fold on the dotted line. Place against edge againts
the wall. Slide towards the ceiling.
If the guide touches the wall but not the ceiling, you
need an angled mounting kit.
34°
WALL
3
1886
Installing the Ceiling Bracket
You have two options for installation. Pick which one works best for your location. Remove any existing
bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box.
Hunter Pro Tip:
The machine screws are the ones
that came with your outlet box.
Do this first!
er
ow
P
n
r
Tu
OFF
x2
Washer
Option 2:
Wood Screws
Option 1:
Machine Screws
Use wood screws and
washers (included) when
securing to support structure
with approved electrical
outlet box. Drill 9/64” pilot
holes in support structure
to aid in securing ceiling
bracket with hardware found
in the
hardware bag.
Use machine screws
(provided with outlet box)
and washers when securing
to existing ceiling fan-rated
outlet box. Make sure it is
securely installed and is
acceptable for fan support of
31.8 kg (70 lbs) or less.
bag
D MOUNTING TIP
LE
ANG
For angled ceilings,
point opening
toward peak.
x2
Wood Screw
Installing the Downrod
2
1
8”
&
(not to scale)
STEP
3/8”
3
STRIP
The ground wire attached to the
downrod is approximately 8 inches.
CUT
STEP
Hunter Pro Tip:
STEP
Follow below if you are using the downrod that came pre-assembled in your box. Need to
install a longer or shorter downrod? Check out the guide at the end of this manual.
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
!
KEEP
WARNING
Remove the pre-installed
setscrew so that the
downrod can be inserted.
Ceiling Bracket
Downrod
FAN FALL HAZARD
Pass all wires to one side of horizontal
bar in downrod assembly. Hand tighten
the downrod (at least 4–5 full turns)
until it stops. Trim the wires coming
from the fan so that 8-inches remain
coming from the top of the downrod.
Hanging Fan
Wiring
Canopy
Blades
To prevent SERIOUS INJURY or DEATH:
• ALWAYS tighten setscrew with pliers.
• DO NOT hand tighten setscrew.
• CHECK the setscrew is tight using pliers
each time you change fan direction.
Light
Bulbs/Glass
Wall Control
4
1886
Hanging the Fan
S li d e c a n o p y
ove
NOTICE
rd
o
wn
ro d
an d
To prevent damage to fan,
ALWAYS lift holding either the
fan housing or the downrod.
w i re s .
Place the downrod ball into
the slot in the ceiling bracket.
Progress Check:
Your fan should look like this.
5
Ceiling Bracket
Downrod
Hanging Fan
Wiring
Canopy
Blades
Light
Bulbs/Glass
Wall Control
1886
Wiring the Fan
We know wiring is hard. Let’s make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch
setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician.
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire
nut over them. Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
Slide the remote
receiver onto the
top of the bracket.
Hunter Pro Tip:
WARNING
Have extra wiring?
Turn the wires upward and push them carefully back through
the hanger bracket into the outlet box. Make sure that the
wires are still attached to the wire nuts.
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
Connect the black
(ungrounded) wire from
the ceiling to the black
wire from the receiver.
Ung
Bla
ck
Bl
d
ite
Wh
White
Gro
/Yellow
Downrod
Stripe
Blue
Blue
leue
BlBu
Ceiling Bracket
ing
Green
Connect the blue wire
from the receiver to the
blue wire from the fan.
Wire Nut
Hanging Fan
Wiring
Canopy
Blades
Light
rip
e
St
und
x4
bag
ow
Yell
Green/
Connect the white (grounded)
wire from the ceiling to both
the white wire from the
receiver and the white wire
from the fan.
k
ac
nde
ed
und
Gro
rou
Yello
w
Connect the yellow
wire from the
receiver to the black
wire from the fan.
Bulbs/Glass
Connect the three
grounding wires (green,
green/yellow stripe, or
bare copper) coming from
the ceiling, downrod, and
hanging bracket.
Wall Control
6
1886
Installing the Canopy
Insert the two canopy screws
found in the
hardware bag.
x2
bag
Canopy Screw
op
Fi t t h e c a n
yi
n
pla
ce
as s
h o w n.
Hunter Pro Tip:
Lift the canopy into place so that
the screw holes are aligned.
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
Installing the Blades:
Attach each blade to a blade iron using the blade washers, found in the
bag, and the blade assembly screws, found in the
hardware bag.
hardware
Repeat x4
x12
Blade Screw
bag
x12
bag
7
Ceiling Bracket
Downrod
Hanging Fan
Wiring
Canopy
Blades
Light
Bulbs/Glass
Blade Washer
Wall Control
1886
Assembling the LIght Kit
2 of 6
bag
1 of 6
Light Kit Screw
Light Kit Screw
bag
Partially install two light kit assembly
screws, found in the
hardware
bag, halfway into the motor housing
as shown. It does not matter which
two screw holes you choose.
Feed the wire plug through the center
hole of the upper switch housing,
then wrap keyhole slots around the
screws and twist counterclockwise.
Insert the third screw,
found in the
hardware
bag, into place and then
tighten all three screws.
3 of 6
bag
Connect the plugs from the upper and lower
switch housings. Make sure to line up the colored
markings on the connectors. Lift the lower switch
housing until its screw holes are aligned with the
screw holes in the upper switch housing.
Light Kit Screw
Install the three switch housing screws, found in
the
hardware bag. Tighten all three screws.
WARNING
FAN FALL HAZARD
Make sure all screws are tight to secure
the light fixture.
Installing the Bulbs and Glass
er
ow
P
n
r
Tu
Lift the glass and attach
it to the light fixture using
the three thumbscrews.
Tighten all three screws
securely by hand.
ON
NOTE: Check to ensure
proper engagement.
WARNING
Install the included LED
bulb into the socket. When
necessary, replace with
bulb of same wattage.
Ceiling Bracket
Downrod
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
Hanging Fan
Wiring
Canopy
Blades
Light
Bulbs/Glass
Wall Control
8
1886
Preparing the Wall Control
1
Turning off the power
KEY PRESS
Ensure the power is OFF at the outlet box
and wall switch location before proceeding
with installation.
LIGHT FUNCTIONS
n
Tur
2
Installing the battery
To access the battery compartment, slide
the battery door up.
FUNCTION
er
Pow
Light On/Off
OFF
Light Dimming
Control
Long
Press
Long
Press
Battery
Door
Long
Press
Replace the used battery with two AAA
batteries when needed.
Light High
Light Low
Dimming Mode
On/Off
+
FAN FUNCTIONS
Fan On/Off
3
Wiring the Wall Control
Fan Speed
Control
Connect the grounding wire from the wall
control to the ground control from the
switch box using the provided wire nuts.
Long
Press
Long
Press
Connect the “LIVE IN” from the switch
box to the “~VAC” from the wall control
using the provided wire nuts.
Long
Press
Push all wires into the switch box.
Installing the Wall Control
5
Installing the Wall Plate
6
Turning on the power
Install the longer screws through the
slots in the wall control into the switch
box screw holes.
Install the shorter screws through the
wall control plate and into the screw
holes in the wall control.
n
Tur
9
Ceiling Bracket
Downrod
Fan Low
Power On/Off
Connect the “LIVE OUT” from the switch
box to the “FAN” out from the wall control
using the provided wire nuts.
4
Fan High
+
Pair Function
7
The remote transmitter is already paired to the
receiver and ready to use. If you need to pair
your remote, cycle power to the fan by turning
power off and back on at the wall switch (or
circuit breaker if necessary). Within three
minutes, do the following:
8
Reference the included remote function
card for information on how to use your
wall control!
er
Pow
ON
Hanging Fan
Wiring
Canopy
Blades
Light
Bulbs/Glass
Wall Control
1886
Reversing the Fan
Reverse
Switch
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.
Ceiling fans work in two directions: downdraft
(counterclockwise rotation) and updraft
(clockwise rotation). To change the direction
of air flow, turn the fan off and let it come to a
complete stop. The reversing switch is located
inside the light fixture. It can only be accessed
when the glass is removed. Slide the reversing
switch to the opposite position. Restart the fan.
Limited Lifetime Warranty
Hunter Fan Company grants this limited warranty to the original purchaser of this Hunter
ceiling fan. This document can be found at www.HunterFan.com.
Thank you for choosing Hunter!
How Can Warranty Service Be Obtained?
Proof of purchase is required when requesting warranty service. The original
purchaser must present a sales receipt or other document that establishes proof of
purchase. Hunter, at its sole discretion, may accept a gift receipt. To obtain service,
contact Hunter Fan Company online or by phone.
www.HunterFan.com/Support/Contact-Us/
1-888-830-1326
Please do not ship your fan or any fan parts to Hunter. Delivery will be refused.
What Does This Warranty Cover?
Motor — Limited Lifetime Warranty
If any part of your ceiling fan motor fails during your ownership of the fan due to a
defect in material or workmanship, as determined solely by Hunter, Hunter will provide
you with a replacement fan free of charge.* The foregoing limited warranty applies only
to the motor itself and does not apply to electronic controls – such as remote control
transmitters, remote control receivers, or capacitors – used in conjunction with the
motor. Such electronic control items are included in the one-year limited warranty below.
Other — One-Year Limited Warranty
Except as otherwise indicated throughout this warranty, if any part of your Hunter ceiling
fan fails at any time within one year of the date of purchase due to a defect in material
or workmanship, as determined solely by Hunter, Hunter will provide a replacement part
free of charge.*
Light Kits — Warranty May Vary
Light kits are included in the one-year limited warranty. However, you may qualify for
additional warranty coverage if your fan includes one of the following:
* If no replacement product/part can be provided for your fan, we will provide a comparable or
superior replacement product/part at the sole discretion of Hunter.
What Does This Warranty NOT Cover?
Labor Excluded. This warranty does not cover any costs or fees associated with the labor
(including electrician’s fees) required to install, remove, or replace a fan or any fan parts.
There is no warranty for light bulbs (except where otherwise noted); remote control
batteries; fans purchased or installed outside the United States; fans owned by
someone other than the original purchaser; fans for which proof of purchase has not
been established; fans purchased from an unauthorized dealer; ordinary wear and tear;
minor cosmetic blemishes; refurbished fans; and fans that are damaged due to any
of the following: improper installation, misuse, abuse, improper care, failure to follow
Hunter instructions, accidental damage caused by the fan owner or related parties,
modifications to the fan, improper or incorrectly performed maintenance or repair,
improper voltage supply or power surge, use of improper parts or accessories, failure to
provide maintenance to the fan, or acts of God (e.g. flood).
ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND
WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN.
HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF
WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some States do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF
COVERAGE OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States
do not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you.
How Does State Law Affect Warranty Coverage?
This warranty gives you specific legal rights. You may also have other rights which vary
from state to state.
• LED Light Kits — Three-Year Limited Warranty
If your LED light kit module (not including glass components) or LED bulb
fails at any time within three years of the date of purchase due to a defect
in material or workmanship, as determined solely by Hunter, Hunter will
provide a replacement part free of charge.*
10
1886
Downrod
If you need a different downrod length follow these steps:
Follow steps 1-5 to remove standard downrod pipe
1
2
3
10
9
4
8
5
7
6
WARNING
Follow steps 6-10 to reassemble with new downrod
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
• ALWAYS tighten setscrew with pliers.
• DO NOT hand tighten setscrew.
Troubleshooting
Fan Doesn’t Work
• CHECK the setscrew is tight using pliers
each time you change fan direction.
Noisy Operation
• Make sure power switch is on.
• Make sure the blades are properly installed.
• Check the circuit breaker to ensure the power is turned on.
• Check to see if any of the blades are cracked. If so, replace all of
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen the canopy
and check all the connections according to the wiring diagram.
Excessive Wobbling
• Make sure the blades are properly installed on the blade iron
posts.
• Turn the power off, support the fan carefully, and check that the
hanger ball is properly seated.
• Use the provided balancing kit and instructions to balance the fan.
the blades.
Remote Control of Fan is Erratic
• Make sure the battery is installed correctly.
• Install a fresh battery.
Multiple Remote Issues
• If you have multiple remotes or multiple remote-controlled fans
installed on the same circuit breaker and you are experiencing
interference or faulty operation of your remote controls, please
go to
www.HunterFan.com/FAQs and click “How do I properly install
multiple remote-controlled fans?” for information on how to
correct this issue.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement