Legrand AMTPN/ 25DTPN Cabling System Adapter for Wiremold Modular Tele-Power Poles Installation Instruction

Wiremold Electrical Systems conform to and
should be properly grounded in compliance with
requirements of the current National Code or
codes administered by local authorities.
AMTPN/ 25DTPN
Cabling System Adapter
For Wiremold Modular
Tele-Power® Poles
INSTALLATION INSTRUCTIONS
All electrical products may represent a possible
shock or fire hazard if improperly installed or used.
Wiremold electrical products are UL listed, made
for interior use in dry locations only and should be
installed in conformance with current local and/or
the National Electrical Code.
Adapter covers not included.
I4N
RSN
T4N
C4N
DEC
TCN
TTN
CCN
1. Insert screw driver into slot, turn slowly, adjust pressure.
Remove communications cover from power pole.
Riser
Plate
8” Cover
#6 Self
Tapping
Screw
2. Screw riser plate into 8” cover section provided, using
#6 self tapping screws.
3. Select adapter cover to be used, snap adapter into
AMTPN/25DTPN wire per instructions. Snap
AMTPN/25DTPN to space provided at bottom of pole.
The Wiremold Company
60 Woodlawn Street, P.O. Box 332500
West Hartford, CT 06133-2500
Tel. (203) 233-6251 Fax 203-232-2062
39208 694