Legrand LUX-QIG-PDU-16-v3 (PDF) Installation Instruction

Legrand LUX-QIG-PDU-16-v3 (PDF) Installation Instruction
This Luxul™ product has a 3-year limited product warranty and connected
equipment protection policy. The 3-year limited product warranty includes
protection against defects in workmanship and materials, provided the product
remains unmodified and is operated under normal and proper conditions.
Products returned to Luxul for warranty service must be accompanied by a
Return Material Authorization (RMA) number.
For the full product warranty and connected equipment protection policy,
please click here Luxul PDU warranty page online.
Lifetime Support
Luxul offers free lifetime support of all products purchased through an
authorized channel. For support on specific product, visit the product page on
the website or the support section in the Dealer Portal, or to contact support,
visit our Support Resources page online.
Connected Equipment Protection Policy
$25,000
For more information on the connected equipment portion of the Luxul
PDU Warranty and Connected Equipment Protection Policy, please visit our
Warranty Luxul PDU warranty page online.
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2017 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and
Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other
trademarks and registered trademarks are property of their respective holders.
READ ME FIRST
3-Year Limited Warranty
INSTALLATION AND SETUP
QUICK INSTALL GUIDE
1
Physical Installation
The PDU 16 can be easily installed on any flat surface. Alternately, use the included
hardware kit to attach the mounting clips to a wall or rack rail, then attach the PDU
16 to the mounting clips.
nn NOTE: To remove the PDU 16 from the mounting clips, wedge a flathead
screwdriver between the side of the unit and clip, then gently pry the PDU
from each of the clips.
Rackrail
Mounting
Bracket
Nut
2
Connecting Ethernet and Power
Connecting Power
Use the included power cable to connect the PDU 16 to an outlet with
adequate current capacity. Once the power cable is connected, move the
integrated plug retainer into position to hold the power cable firmly and
prevent accidental disconnection.
nn NOTE: The built-in power supply is compatible only with
120VAC at 60Hz.
nn NOTE: The PDU 16 is rated for 12A maximum continuous load, and
15A maximum peak load. Do not exceed these limits with the
combined consumption of all powered devices. Use only the
included power supply cord.
PDU 16
Connecting Ethernet
Intelligent Network PDU
Connect the PDU 16 to your network with a standard Ethernet cable. Install
the provided RF choke on your Ethernet cable as closely as possible to the
connector going into the PDU 16.
PDU-16
Includes:
„„
PDU 16 16-Outlet Intelligent Network PDU
„„
Mounting Kit
„„
Ferrite RF Choke
„„
Power Cord
Mounting
Clip
Fixed
Mounting
Position
Screw
Rack-Mounting the PDU 16
Install the RF Choke on the Ethernet Cable
This Luxul™ product has a 3-year limited product warranty and connected
equipment protection policy. The 3-year limited product warranty includes
protection against defects in workmanship and materials, provided the product
remains unmodified and is operated under normal and proper conditions.
Products returned to Luxul for warranty service must be accompanied by a
Return Material Authorization (RMA) number.
For the full product warranty and connected equipment protection policy,
please click here Luxul PDU warranty page online.
Lifetime Support
Luxul offers free lifetime support of all products purchased through an
authorized channel. For support on specific product, visit the product page on
the website or the support section in the Dealer Portal, or to contact support,
visit our Support Resources page online.
Connected Equipment Protection Policy
$25,000
For more information on the connected equipment portion of the Luxul
PDU Warranty and Connected Equipment Protection Policy, please visit our
Warranty Luxul PDU warranty page online.
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2017 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and
Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other
trademarks and registered trademarks are property of their respective holders.
READ ME FIRST
3-Year Limited Warranty
INSTALLATION AND SETUP
QUICK INSTALL GUIDE
1
Physical Installation
The PDU 16 can be easily installed on any flat surface. Alternately, use the included
hardware kit to attach the mounting clips to a wall or rack rail, then attach the PDU
16 to the mounting clips.
nn NOTE: To remove the PDU 16 from the mounting clips, wedge a flathead
screwdriver between the side of the unit and clip, then gently pry the PDU
from each of the clips.
Rackrail
Mounting
Bracket
Nut
2
Connecting Ethernet and Power
Connecting Power
Use the included power cable to connect the PDU 16 to an outlet with
adequate current capacity. Once the power cable is connected, move the
integrated plug retainer into position to hold the power cable firmly and
prevent accidental disconnection.
nn NOTE: The built-in power supply is compatible only with
120VAC at 60Hz.
nn NOTE: The PDU 16 is rated for 12A maximum continuous load, and
15A maximum peak load. Do not exceed these limits with the
combined consumption of all powered devices. Use only the
included power supply cord.
PDU 16
Connecting Ethernet
Intelligent Network PDU
Connect the PDU 16 to your network with a standard Ethernet cable. Install
the provided RF choke on your Ethernet cable as closely as possible to the
connector going into the PDU 16.
PDU-16
Includes:
„„
PDU 16 16-Outlet Intelligent Network PDU
„„
Mounting Kit
„„
Ferrite RF Choke
„„
Power Cord
Mounting
Clip
Fixed
Mounting
Position
Screw
Rack-Mounting the PDU 16
Install the RF Choke on the Ethernet Cable
This Luxul™ product has a 3-year limited product warranty and connected
equipment protection policy. The 3-year limited product warranty includes
protection against defects in workmanship and materials, provided the product
remains unmodified and is operated under normal and proper conditions.
Products returned to Luxul for warranty service must be accompanied by a
Return Material Authorization (RMA) number.
For the full product warranty and connected equipment protection policy,
please click here Luxul PDU warranty page online.
Lifetime Support
Luxul offers free lifetime support of all products purchased through an
authorized channel. For support on specific product, visit the product page on
the website or the support section in the Dealer Portal, or to contact support,
visit our Support Resources page online.
Connected Equipment Protection Policy
$25,000
For more information on the connected equipment portion of the Luxul
PDU Warranty and Connected Equipment Protection Policy, please visit our
Warranty Luxul PDU warranty page online.
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2017 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and
Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other
trademarks and registered trademarks are property of their respective holders.
READ ME FIRST
3-Year Limited Warranty
INSTALLATION AND SETUP
QUICK INSTALL GUIDE
1
Physical Installation
The PDU 16 can be easily installed on any flat surface. Alternately, use the included
hardware kit to attach the mounting clips to a wall or rack rail, then attach the PDU
16 to the mounting clips.
nn NOTE: To remove the PDU 16 from the mounting clips, wedge a flathead
screwdriver between the side of the unit and clip, then gently pry the PDU
from each of the clips.
Rackrail
Mounting
Bracket
Nut
2
Connecting Ethernet and Power
Connecting Power
Use the included power cable to connect the PDU 16 to an outlet with
adequate current capacity. Once the power cable is connected, move the
integrated plug retainer into position to hold the power cable firmly and
prevent accidental disconnection.
nn NOTE: The built-in power supply is compatible only with
120VAC at 60Hz.
nn NOTE: The PDU 16 is rated for 12A maximum continuous load, and
15A maximum peak load. Do not exceed these limits with the
combined consumption of all powered devices. Use only the
included power supply cord.
PDU 16
Connecting Ethernet
Intelligent Network PDU
Connect the PDU 16 to your network with a standard Ethernet cable. Install
the provided RF choke on your Ethernet cable as closely as possible to the
connector going into the PDU 16.
PDU-16
Includes:
„„
PDU 16 16-Outlet Intelligent Network PDU
„„
Mounting Kit
„„
Ferrite RF Choke
„„
Power Cord
Mounting
Clip
Fixed
Mounting
Position
Screw
Rack-Mounting the PDU 16
Install the RF Choke on the Ethernet Cable
3
Access and Setup
4
Hardware Operation
Getting Connected
Front Panel
If the PDU 16 isn’t already connected to mains power, plug in the PDU. The
PDU 16 is configured to use DHCP. Once initialized, the PDU 16 will power
on all eight switched outlets in sequence and obtain an IP address from a
DHCP server on the network.
The front panel of the PDU 16 includes the power supply inlet (with cable
retainer), outlet status indicators, general status indicator, a reset button and an
Ethernet port.
Using a computer or mobile device, log in to a router on the network and
locate the PDU 16 in the router’s DHCP client reservation table. Alternately,
you may also use a remote management system, IP scanner or a similar
tool to find the PDU 16 on the network and determine its IP address. The
PDU 16 can be identified by its DHCP client name, which will look like
“PDU-16-78083E,” where the last half of the name represents the last
three octects of the device’s MAC address. Once you locate it, make a
note of the IP address. If the PDU 16 fails to find a DHCP server the unit
will default to the IP address 192.168.0.6
Logging In
To access the PDU 16 web UI, use a web browser on a computer or mobile
device on the same network as the PDU 16. In the address field, enter the IP
address you determined in the previous step. Log in to
the PDU 16 using the default user name and password:
Front Panel with Status Indicators, Ethernet port, and Reset Button
End Panel
The end panel of the PDU 16, nearest the power supply inlet, features a circuit
breaker and a grounding screw.
Username: admin
Password: admin
Select the menu items to view and/or modify the configuration. For
more guidance on setup and configuration, refer to the product support
resources at luxul.com.
End Panel with Ground Screw and Circuit Breaker
LED Indicators
Reset Button
The LED indicators on the PDU 16 include a general device status LED, and a
power status indicator for each of the eight controlled outlets.
The Reset button (located adjacent the Ethernet port) is used to restore the
PDU to factory default settings.
The following chart shows the LED indicators of the Volt along with an
explanation of the indicator’s properties:
XX
To Reboot the PDU: Remove the power supply cord from the PDU, wait
five seconds, then reconnect the power supply cord to restore power.
XX
To Restore Default Settings: With the PDU 16 powered on, use a pen or
stylus to press and hold the Reset button on the back panel for at least
six seconds, then release the button. The PDU automatically restores
factory default settings and reboots. Once the Status LED indicates
normal operation (see LED Indicators section), the PDU 16 is running
again with factory defaults, including username and password and any IP
configuration.
Indicator
Name
Status
Description
On
Indicates alert/alarm is triggered..
Brief Red
Indicates the PDU 2 is in start up mode.
Solid Red
There is a malfunction. Contact support.
Off
Indicates normal operation.
Outlet
On
Outlet is powered on.
Status 1-15
Off
Outlet is powered off.
(odd #’s)
Note: At startup, the outlet LEDs will power on in sequence.
nn NOTE: P lease note that restoring Default Settings will remove any/
all custom configuration.
3
Access and Setup
4
Hardware Operation
Getting Connected
Front Panel
If the PDU 16 isn’t already connected to mains power, plug in the PDU. The
PDU 16 is configured to use DHCP. Once initialized, the PDU 16 will power
on all eight switched outlets in sequence and obtain an IP address from a
DHCP server on the network.
The front panel of the PDU 16 includes the power supply inlet (with cable
retainer), outlet status indicators, general status indicator, a reset button and an
Ethernet port.
Using a computer or mobile device, log in to a router on the network and
locate the PDU 16 in the router’s DHCP client reservation table. Alternately,
you may also use a remote management system, IP scanner or a similar
tool to find the PDU 16 on the network and determine its IP address. The
PDU 16 can be identified by its DHCP client name, which will look like
“PDU-16-78083E,” where the last half of the name represents the last
three octects of the device’s MAC address. Once you locate it, make a
note of the IP address. If the PDU 16 fails to find a DHCP server the unit
will default to the IP address 192.168.0.6
Logging In
To access the PDU 16 web UI, use a web browser on a computer or mobile
device on the same network as the PDU 16. In the address field, enter the IP
address you determined in the previous step. Log in to
the PDU 16 using the default user name and password:
Front Panel with Status Indicators, Ethernet port, and Reset Button
End Panel
The end panel of the PDU 16, nearest the power supply inlet, features a circuit
breaker and a grounding screw.
Username: admin
Password: admin
Select the menu items to view and/or modify the configuration. For
more guidance on setup and configuration, refer to the product support
resources at luxul.com.
End Panel with Ground Screw and Circuit Breaker
LED Indicators
Reset Button
The LED indicators on the PDU 16 include a general device status LED, and a
power status indicator for each of the eight controlled outlets.
The Reset button (located adjacent the Ethernet port) is used to restore the
PDU to factory default settings.
The following chart shows the LED indicators of the Volt along with an
explanation of the indicator’s properties:
XX
To Reboot the PDU: Remove the power supply cord from the PDU, wait
five seconds, then reconnect the power supply cord to restore power.
XX
To Restore Default Settings: With the PDU 16 powered on, use a pen or
stylus to press and hold the Reset button on the back panel for at least
six seconds, then release the button. The PDU automatically restores
factory default settings and reboots. Once the Status LED indicates
normal operation (see LED Indicators section), the PDU 16 is running
again with factory defaults, including username and password and any IP
configuration.
Indicator
Name
Status
Description
On
Indicates alert/alarm is triggered..
Brief Red
Indicates the PDU 2 is in start up mode.
Solid Red
There is a malfunction. Contact support.
Off
Indicates normal operation.
Outlet
On
Outlet is powered on.
Status 1-15
Off
Outlet is powered off.
(odd #’s)
Note: At startup, the outlet LEDs will power on in sequence.
nn NOTE: P lease note that restoring Default Settings will remove any/
all custom configuration.
3
Access and Setup
4
Hardware Operation
Getting Connected
Front Panel
If the PDU 16 isn’t already connected to mains power, plug in the PDU. The
PDU 16 is configured to use DHCP. Once initialized, the PDU 16 will power
on all eight switched outlets in sequence and obtain an IP address from a
DHCP server on the network.
The front panel of the PDU 16 includes the power supply inlet (with cable
retainer), outlet status indicators, general status indicator, a reset button and an
Ethernet port.
Using a computer or mobile device, log in to a router on the network and
locate the PDU 16 in the router’s DHCP client reservation table. Alternately,
you may also use a remote management system, IP scanner or a similar
tool to find the PDU 16 on the network and determine its IP address. The
PDU 16 can be identified by its DHCP client name, which will look like
“PDU-16-78083E,” where the last half of the name represents the last
three octects of the device’s MAC address. Once you locate it, make a
note of the IP address. If the PDU 16 fails to find a DHCP server the unit
will default to the IP address 192.168.0.6
Logging In
To access the PDU 16 web UI, use a web browser on a computer or mobile
device on the same network as the PDU 16. In the address field, enter the IP
address you determined in the previous step. Log in to
the PDU 16 using the default user name and password:
Front Panel with Status Indicators, Ethernet port, and Reset Button
End Panel
The end panel of the PDU 16, nearest the power supply inlet, features a circuit
breaker and a grounding screw.
Username: admin
Password: admin
Select the menu items to view and/or modify the configuration. For
more guidance on setup and configuration, refer to the product support
resources at luxul.com.
End Panel with Ground Screw and Circuit Breaker
LED Indicators
Reset Button
The LED indicators on the PDU 16 include a general device status LED, and a
power status indicator for each of the eight controlled outlets.
The Reset button (located adjacent the Ethernet port) is used to restore the
PDU to factory default settings.
The following chart shows the LED indicators of the Volt along with an
explanation of the indicator’s properties:
XX
To Reboot the PDU: Remove the power supply cord from the PDU, wait
five seconds, then reconnect the power supply cord to restore power.
XX
To Restore Default Settings: With the PDU 16 powered on, use a pen or
stylus to press and hold the Reset button on the back panel for at least
six seconds, then release the button. The PDU automatically restores
factory default settings and reboots. Once the Status LED indicates
normal operation (see LED Indicators section), the PDU 16 is running
again with factory defaults, including username and password and any IP
configuration.
Indicator
Name
Status
Description
On
Indicates alert/alarm is triggered..
Brief Red
Indicates the PDU 2 is in start up mode.
Solid Red
There is a malfunction. Contact support.
Off
Indicates normal operation.
Outlet
On
Outlet is powered on.
Status 1-15
Off
Outlet is powered off.
(odd #’s)
Note: At startup, the outlet LEDs will power on in sequence.
nn NOTE: P lease note that restoring Default Settings will remove any/
all custom configuration.
3
Access and Setup
4
Hardware Operation
Getting Connected
Front Panel
If the PDU 16 isn’t already connected to mains power, plug in the PDU. The
PDU 16 is configured to use DHCP. Once initialized, the PDU 16 will power
on all eight switched outlets in sequence and obtain an IP address from a
DHCP server on the network.
The front panel of the PDU 16 includes the power supply inlet (with cable
retainer), outlet status indicators, general status indicator, a reset button and an
Ethernet port.
Using a computer or mobile device, log in to a router on the network and
locate the PDU 16 in the router’s DHCP client reservation table. Alternately,
you may also use a remote management system, IP scanner or a similar
tool to find the PDU 16 on the network and determine its IP address. The
PDU 16 can be identified by its DHCP client name, which will look like
“PDU-16-78083E,” where the last half of the name represents the last
three octects of the device’s MAC address. Once you locate it, make a
note of the IP address. If the PDU 16 fails to find a DHCP server the unit
will default to the IP address 192.168.0.6
Logging In
To access the PDU 16 web UI, use a web browser on a computer or mobile
device on the same network as the PDU 16. In the address field, enter the IP
address you determined in the previous step. Log in to
the PDU 16 using the default user name and password:
Front Panel with Status Indicators, Ethernet port, and Reset Button
End Panel
The end panel of the PDU 16, nearest the power supply inlet, features a circuit
breaker and a grounding screw.
Username: admin
Password: admin
Select the menu items to view and/or modify the configuration. For
more guidance on setup and configuration, refer to the product support
resources at luxul.com.
End Panel with Ground Screw and Circuit Breaker
LED Indicators
Reset Button
The LED indicators on the PDU 16 include a general device status LED, and a
power status indicator for each of the eight controlled outlets.
The Reset button (located adjacent the Ethernet port) is used to restore the
PDU to factory default settings.
The following chart shows the LED indicators of the Volt along with an
explanation of the indicator’s properties:
XX
To Reboot the PDU: Remove the power supply cord from the PDU, wait
five seconds, then reconnect the power supply cord to restore power.
XX
To Restore Default Settings: With the PDU 16 powered on, use a pen or
stylus to press and hold the Reset button on the back panel for at least
six seconds, then release the button. The PDU automatically restores
factory default settings and reboots. Once the Status LED indicates
normal operation (see LED Indicators section), the PDU 16 is running
again with factory defaults, including username and password and any IP
configuration.
Indicator
Name
Status
Description
On
Indicates alert/alarm is triggered..
Brief Red
Indicates the PDU 2 is in start up mode.
Solid Red
There is a malfunction. Contact support.
Off
Indicates normal operation.
Outlet
On
Outlet is powered on.
Status 1-15
Off
Outlet is powered off.
(odd #’s)
Note: At startup, the outlet LEDs will power on in sequence.
nn NOTE: P lease note that restoring Default Settings will remove any/
all custom configuration.
This Luxul™ product has a 3-year limited product warranty and connected
equipment protection policy. The 3-year limited product warranty includes
protection against defects in workmanship and materials, provided the product
remains unmodified and is operated under normal and proper conditions.
Products returned to Luxul for warranty service must be accompanied by a
Return Material Authorization (RMA) number.
For the full product warranty and connected equipment protection policy,
please click here Luxul PDU warranty page online.
Lifetime Support
Luxul offers free lifetime support of all products purchased through an
authorized channel. For support on specific product, visit the product page on
the website or the support section in the Dealer Portal, or to contact support,
visit our Support Resources page online.
Connected Equipment Protection Policy
$25,000
For more information on the connected equipment portion of the Luxul
PDU Warranty and Connected Equipment Protection Policy, please visit our
Warranty Luxul PDU warranty page online.
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2017 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and
Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other
trademarks and registered trademarks are property of their respective holders.
READ ME FIRST
3-Year Limited Warranty
INSTALLATION AND SETUP
QUICK INSTALL GUIDE
1
Physical Installation
The PDU 16 can be easily installed on any flat surface. Alternately, use the included
hardware kit to attach the mounting clips to a wall or rack rail, then attach the PDU
16 to the mounting clips.
nn NOTE: To remove the PDU 16 from the mounting clips, wedge a flathead
screwdriver between the side of the unit and clip, then gently pry the PDU
from each of the clips.
Rackrail
Mounting
Bracket
Nut
2
Connecting Ethernet and Power
Connecting Power
Use the included power cable to connect the PDU 16 to an outlet with
adequate current capacity. Once the power cable is connected, move the
integrated plug retainer into position to hold the power cable firmly and
prevent accidental disconnection.
nn NOTE: The built-in power supply is compatible only with
120VAC at 60Hz.
nn NOTE: The PDU 16 is rated for 12A maximum continuous load, and
15A maximum peak load. Do not exceed these limits with the
combined consumption of all powered devices. Use only the
included power supply cord.
PDU 16
Connecting Ethernet
Intelligent Network PDU
Connect the PDU 16 to your network with a standard Ethernet cable. Install
the provided RF choke on your Ethernet cable as closely as possible to the
connector going into the PDU 16.
PDU-16
Includes:
„„
PDU 16 16-Outlet Intelligent Network PDU
„„
Mounting Kit
„„
Ferrite RF Choke
„„
Power Cord
Mounting
Clip
Fixed
Mounting
Position
Screw
Rack-Mounting the PDU 16
Install the RF Choke on the Ethernet Cable
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement