Legrand Power Pack and Auxiliary Relay Pack Installation Instruction

Legrand Power Pack and Auxiliary Relay Pack Installation Instruction
REV.
5
6
7
DESCRIPTION
REV. DATE
PER ECO #101395-1
ECO# C00594
ECO# C00608
APPROVED
12/31/96 S.Chen
4/17/03
NJD
and
Auxiliary Relay Pack
CAUTION
TURN POWER OFF AT THE CIRCUIT BREAKER BEFORE
INSTALLING POWER PACKS OR AUXILIARY RELAY PACKS.
ONLY QUALIFIED ELECTRICIANS SHOULD INSTALL THIS UNIT.
The power pack attaches to existing junction boxes.
All low voltage wiring should be at
POWER PACK
least 22 gauge wire. All high
voltage connections should be at
least 14 gauge. Always check local
building codes. After initial wiring is
complete, verify that power pack is wired
correctly. Improper wiring can damage the
MAKE HIGH VOLTAGE
CONNECTIONS INSIDE
power pack, lighting system and occupancy
J-BOX
sensor.
White (Neutral)
Red (Line)
Black
Red (Load)
AUXILIARY
RELAY
PACK
Switch
Red
Hot
Lighting
Load
POWER PACK
Black
White
Blue
N
+24VDC
Black
Common
Blue
Control Output 24VDC
OFF switch
Hot
86-0417-00r7
Red (line)
Red (load)
Lighting
Load
N
Any 24VDC Sensor
Ceiling or Wall Mount
www.wattstopper.com
Santa Clara, CA 95050
Technical Support: 800.879.8585 • 972.578.1699
MATERIAL:White 16 lb. (60g/m sq)
INK COLOR: Black
Drawn by:
SOWINSKI
PLM:
the
Installation Instructions
Power Packs
6 inches
4 inches
Watt Stopper Inc.
SANTA CLARA, CALIFORNIA
Title:
Power Pack and Auxiliary Relay Pack
INSTALLATION INSTRUCTIONS
MarCom:
ENG:
QA:
All information in this drawing is the property
of The Watt Stopper Inc. and cannot be copied or used
without the written approval of The Watt Stopper Inc.
Sheet 1 of 1
Scale 1:1
Drawing #:
Original Drwg. Date: 00 FEB 95
86-0417-00
Rev. Date: 24 APR 03
Rev.#:
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement