Legrand LMLS-MB1/MB2 DLM Photosensor Mounting Brackets Installation Instruction

Legrand LMLS-MB1/MB2 DLM Photosensor Mounting Brackets Installation Instruction
Digital Lighting Management (DLM)
Photosensor Mounting Brackets
LMLS-MB1
LMLS-MB2
SPECIFICATIONS
Material: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABS, UL 94 5V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flame Retardent Material
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indoor Use Only
Mounting Options:
LMLS-MB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-Square J-Box
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Gang J-Box
LMLS-MB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screw to Wall
. . . . . . . . . . . . . . . . . . . . . . . . . . Tape to wall with double sided tape
Installation Instructions
LMLS-MB1/MB2
DESCRIPTION
The LMLS-MB1 and LMLS-MB2 mounting brackets provide the flexibility to
mount the LMLS-400 and LMLS-500 Photosensors to walls, skylight wells or
J-Boxes. They are specifically designed to be used in conjunction with these
Photosensors.
LMLS-MB1
J-Box mounted
Ceiling or Ceiling Tile
Ceiling Mounting bracket
Surface Mount using
Mounting Bracket
Mounting bracket
Surface Mount
using LMLS-MB2
Mounting Bracket
Skylight light well
LMLS-MB2
Skylight wall
mounted
Remove
tab
Or
Cabling
Call 800.879.8585 for Technical Support
LMLS-MB1 MOUNTING OPTIONS
The LMLS-MB1 is designed to be able to mount to a standard 4" square
junction box as well as a 2-gang junction box.
Using a small screwdriver, punch out the holes for the corresponding junction
box. Holes are clearly marked on the rear side of mounting plate.
Mounting plate
back view
2-gang
Hole for
4"Square
J-box
Hole for
2-gang
wall box
Hole for
2-gang
wall box
2-gang
Hole for
2-gang
wall box
2-gang
Hole for
2-gang
wall box
2-gang
Hole for
4"Square
J-box
www.wattstopper.com
LMLS-MB1 MOUNTING INSTRUCTIONS
After punching out the holes, use the provided screws to mount the
LMLS-MB1 to the corresponding junction box as shown.
Mounting to a
4” square Jbox
Mounting to a
2 gang wall box
2-gang
4 screws
4 square J-box
2 screws
CONNECTING THE RJ-45 CABLE
Run RJ-45 cable
through J-box.
Slide sensor into
the LMLS-MB1
to finish.
Connect RJ-45 cable and photosensor as shown.
Call 800.879.8585 for Technical Support
LMLS-MB2 MOUNTING OPTIONS
The LMLS-MB2 can be mounted to a wall with the provided screws or by
using the double-sided tape. Using the provided template, marking the wall
with appropriate hole spacings is made easy. The
LMLS-MB2 has a small break-away tab at the
bottom of the bracket for use when running the
RJ-45 cable on the wall surface if desired.
For the screw holes, use a #40 drill gauge bit size
to drill a 0.098"pilot hole. If drilling through a wall
the recommended hole size diameter to drill for
the cable is 0.875".
Break-away
tab
MOUNTING WITH SCREWS
2. Drill screw pilot holes using #40 drill bit.
0.098"pilot
holes
1. Use template to mark
wall with appropriate hole
spacings.
Hole size diameter to drill
for cable is 0.875"
Align screw holes on
mounting bracket to
markings on wall.
3. Use provided screws to
mount the LMLS-MB2 to
the wall.
www.wattstopper.com
LMLS-MB2 PLACEMENT EXAMPLE
Mounting when running the
RJ-45 cable through wall.
Mounting when running the RJ-45
cable on the wall surface.
0.098"pilot
holes
0.098"pilot
holes
Or
Cable goes
on wall surface
Cable goes
through wall
Template hole size diameter
to drill for cable is 0.875".
WIRING DETAIL
Connect RJ-45 cable and photosensor as shown.
RJ-45 Cable Going
Through Wall
Run On the Wall Surface
Slide sensor into the
LMLS-MB2 wall mount
bracket to finish.
Plug
RJ-45
cable
into the
RJ45
socket on
the end of
the unit.
Or
Run RJ-45 cable
through wall.
Remove tab
when running RJ-45 cable
on the wall surface
Call 800.879.8585 for Technical Support
LMLS-MB2 MOUNTING OPTIONS
MOUNTING WITH DOUBLE-SIDED TAPE
The LMLS-MB2 can be mounted to a wall using the double-sided tape. Using
the provided template, mark the wall with the appropriate hole spacings . The
LMLS-MB2 has a small break-away tab at the bottom of the bracket for use when
running the RJ-45 cable on the wall surface if desired.
Use template to mark
wall with appropriate
hole spacings.
Break-away
tab
PLACEMENT EXAMPLE
Mounting when running the
RJ-45 cable through wall.
Mounting when running the RJ-45
cable on the wall surface.
0.098"pilot
holes
0.098"pilot
holes
Or
Cable goes
on wall surface
Cable goes
through wall
Template hole size diameter
to drill for cable is 0.875".
www.wattstopper.com
MOUNTING INSTRUCTIONS
Visually align to markers on
wall, then press on wall.
Apply tape to rear recess
as shown.
Tape
WIRING DETAIL
RJ-45 Cable Going
Through Wall
Run On the Wall
Surface
Slide sensor into
the LMLS-MB2 wall
mount bracket to
finish.
Or
Remove tab
when running RJ-45 cable
on the wall surface
Connect RJ-45 cable and
photosensor as shown.
2800 De La Cruz Boulevard, Santa Clara, CA 95050
800.879.8585 • www.wattstopper.com
14677 r1 06/11
REV
ECO #
IN
1
C04592
C
TITLE BOX PAGE
DO NOT MAKE FILM • DO
• Material: White 80g/m
(prefer recycled stock)
• Final trim size: 16" (W
• Four (4) fold. 2 sided.
• Final folded size: 4" (W
• Ink Color: CYMK
IF YOU HAVE ANY QUESTIONS REGARDING S
ADDITIONAL FILE FORMATTING, PLEASE CON
All information in this drawing is the property of Wa
copied or used without the written approva
Drawn by:
ROBERTSON:
PLM:
DT
Tech Writing:
CR
Eng:
AF
QA
TITLE BOX PG.
Scale: 1 : 1
Title: LMLS
Instructions
Drawing #:
14677
NT
REV DATE
APPROVED
CR
6/30/2011
CG
ONLY.
O NOT PRINT
sq. uncoated
)
Wide) x 6" (High).
Wide) x 6" (High).
SPECIFICATIONS OR REQUIRE
NTACT Engineering.
WattStopper and cannot be
al of WattStopper.
S-MB1 and LMLS-MB2 Installation
s
Original Drwg. Date:
Rev. Date:
09 JUN 11
30 JUN 11
Rev #:
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement