Beko DFN05310 Owner Manual
Dishwasher
User’s Manual
DFN05310B
DFN05310W
EN
Document Number :
15 9863 0100_AA_BEKO_A5_EN/ 14-02-18.(11:37)
Dishwasher
User’s Manual
DFN05310B
DFN05310W
EN
Document Number :
15 9863 0100_AA_BEKO_A5_EN/ 14-02-18.(11:37)
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire
user manual and all other accompanying documents carefully before using the product
and keep it as a reference for future use. If you handover the product to someone else,
give the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
C
A
B
Important information or useful
hints about usage.
Warning for hazardous
situations with regard to life and
property.
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the local
authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire
user manual and all other accompanying documents carefully before using the product
and keep it as a reference for future use. If you handover the product to someone else,
give the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
C
A
B
Important information or useful
hints about usage.
Warning for hazardous
situations with regard to life and
property.
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the local
authorities.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT
4
General safety........................................4
Intended use...........................................4
Children’s safety.....................................5
Disposing of packaging material.........5
Transportation of the product.............5
Compliance with WEEE Directive and
Disposing of the Waste Product..........6
Compliance with RoHS Directive.........6
Package information.............................6
2 DISHWASHER
7
Overview.................................................7
Fan drying system..................................8
Technical specifications........................8
3 INSTALLATION
9
4 PREPARATION
12
Appropriate installation location........9
Connecting water supply......................9
Connection to the drain..................... 10
Adjusting the feet............................... 10
Electrical connection.......................... 10
This appliance must be earthed........11
Fitting a different plug........................11
Initial use...............................................11
Tips for energy saving.........................12
Water softening system.....................12
Adjusting the water softening
system...................................................12
Adding salt............................................14
Detergent..............................................15
Tablet detergents................................16
Rinse aid................................................17
Items not suitable for washing in the
dishwasher............................................17
Placing the dishes into the
dishwasher........................................... 18
Upper basket height adjustable
rack........................................................ 20
Upper basket multipurpose service
rack........................................................ 20
Collapsible lower basket tines...........21
Cutlery basket ......................................21
5 OPERATING THE PRODUCT22
Keys....................................................... 22
Preparing the machine...................... 22
Programme selection......................... 22
Auxiliary functions............................. 24
Starting the programme.................... 24
Programme follow-up........................ 25
Cancelling the programme................ 25
Salt indicator........................................ 25
Rinse Aid indicator.............................. 25
Adjusting the amount of rinse aid.... 25
End of programme.............................. 26
6 MAINTENANCE AND
CLEANING
27
7 TROUBLESHOOTING
30
8 GUARANTEE
35
Cleaning the outer surface of the
product..................................................27
Cleaning the interior of the machine.27
Cleaning the filters..............................27
Cleaning the hose filter...................... 28
Cleaning the impellers....................... 29
Lower impeller..................................... 29
Upper impeller .................................... 29
1 Instructions for safety and envIronment
This section contains safety
instructions that will help to
give protection from risk of
personal injury or property
damage. Failure to follow
these instructions shall void all
warranties.
••
••
General safety
••
••
••
••
••
••
Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.
Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.
The water supply and
draining hoses must be
securely fastened and remain
undamaged.
Unplug the product when not
in use.
Never wash the product by
spreading or pouring water
onto it! There is the risk of
4 /36 EN
••
••
••
••
••
electric shock!
Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
The product must
be unplugged during
installation, maintenance,
cleaning and repairing
procedures.
Always have the repair
procedures carried out by the
Authorised Service Agent.
Manufacturer shall not be
held liable for damages that
may arise from procedures
carried out by unauthorised
persons.
Never use chemical solvents
in the product. They bring
forth the risk of explosion.
When you pull the upper
and lower baskets out
completely, the door of the
product will bear all the
weight of the baskets. Do not
put other loads on the door;
otherwise, the product may
tilt.
Never leave the door of
the product open apart
from loading and unloading
procedures.
Do not to open the door
of the product when it is
running unless necessary.
Be careful for the rush of
hot steam when you need to
open the door.
Intended use
••
This product has been
designed for domestic use.
Dishwasher / User’s Manual
Instructions for safety and envIronment
••
It must be used to do the
domestic type dishes only.
•• This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments.
•• Only dishwasher safe
detergents, rinse aids and
additives must be used.
•• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
•• This appliance can be used by
children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.
Children’s safety
••
••
Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.
Do not forget to close the
door of the product when
leaving the room where it is
located.
Dishwasher / User’s Manual
••
Store all detergents and
additives in a safe place
away from the reach of the
children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.
Transportation of the
product
A
If you need to move the
product, do it in upright
position and hold from
the rear side. Tilting the
product onto its front
side may cause the
electronic parts in it get
wet and damaged.
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
5 / 36 EN
Instructions for safety and envIronment
Compliance with WEEE
Directive and Disposing
of the Waste Product
collection points designated by
the local authorities.
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This product has been
manufactured with high quality
parts and materials which can be
reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to
the collection center for the
recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
Package information
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
6 /36 EN
Dishwasher / User’s Manual
Dishwasher
2
Overview
15
Dishwasher / User’s Manual
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket
5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket (depends on model)
14. Tabletop (depends on model)
15. Fan drying system (depends on model)
7 / 36 EN
Dishwasher
Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input
220-240 V, 50 Hz (see rating label)
Total power consumption
1800-2100 W (see rating label)
Heater power consumption
1800 W (see rating label)
Total current (depends on the model)
10 A (see rating label)
Drain pump power consumption
30 W (see rating label)
Water pressure
0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
C
C
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
Figures in this manual are schematic and may not match the product exactly.
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the
relevant standards. Depending on operational and environmental conditions of
the product, these values may vary.
Fan drying system
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
8 /36 EN
Dishwasher / User’s Manual
3 Installation
To make the product ready for use,
make sure that the electricity, tap water
supply and water drainage systems are
appropriate before calling the Authorised
Service Agent. If they are not, call a
qualified technician and plumber to have
any necessary arrangements carried out.
Preparation of the location
and electrical, tap water and
waste water installations at the
place of installation is under
customer's responsibility.
C
••
••
Do not install the product at places
where temperature may fall below
0ºC.
Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
Ensure the power cable does
not get trapped under the
product.
B
••
Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
Install the product in a place close
to the tap and the drain. Select the
installation location by considering
that it will not be changed after the
connections are made.
B
A
Manufacturer shall not be held
responsible for damages arising
from processes carried out by
unauthorised persons.
••
Connecting water supply
C
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention
not to damage the floor, walls, piping, etc.
Do not hold the product from its door or
panel to move it.
Appropriate installation
location
••
Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be
installed on a flat surface in order for
the door to be closed comfortably and
securely.
Dishwasher / User’s Manual
••
••
••
Do not use old or used water inlet
hose on the new product. Use the new
water inlet hose supplied with the
product.
Connect the water inlet hose directly
to the cold water tap. Permitted water
temperature up to 25°C. Pressure
coming from the tap should be
minimum 0.3 and maximum 10 bars.
If the water pressure exceeds 10
bars, a pressure relief valve should be
installed in between.
Open the tap completely after making
the connections to check for water
leaks.
For your safety, close the water
inlet tap completely after the
washing programme is over.
A
9 / 36 EN
Installation
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm from
the floor. A discharge hose longer than 4
meters will cause washing performance
to be affected.Attach the water discharge
hose to the drainpipe without bending
it. Tightly fix the water discharge hose
to the drainpipe in order to prevent any
dislocation of the water discharge hose
during operation of the product.
C
Drainpipe must be connected
to the foul water system and it
should not be connected to any
surface water drain.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product wobbles when
you push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the relevant
section.
Diswashers door must be
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.
A
min
120
min
300
min 500
max 1000
Electrical connection
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
If the supply cord or the mains lead is
damaged please do not replace it yourself.
The supply cord or the mains lead must be
replaced by a Authorised Service Agent or a
similarly qualified person.
10 /36 EN
Dishwasher / User’s Manual
Installation
A
This appliance must
be earthed
If the fitted moulded plug is not
suitable for your socket, then
the plug should be cut off and
an appropriate plug fitted.
Destroy the old plug, which is
cut off as a plug with a bared
cord could cause a shock
hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this
appliance incorporates a 13A
fuse. Should the fuse need to
be replaced an ASTA approved
BS1362 fuse of the same rating
must be used. Do not forget
to refit the fuse cover. In the
event of losing the fuse cover,
the plug must not be used
until a replacement fuse cover
has been fitted. Colour of the
replacement fuse cover must
be the same colour as that
visible on the pin face of the
plug. Fuse covers are available
from any good electrical store.
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1. Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol
or
coloured green and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
Dishwasher / User’s Manual
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Initial use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections “Important safety instructions”
and “Installation”.
•• Before using the product, fill the salt
reservoir with 1 litre of water, add salt
(see next page) and stir to dissolve.
Run the Dishwasher without dishes
on a short programme with a small
amount of detergent.
There might be a small amount
of water left in the product
after factory quality control
tests. This causes no harm to
the product.
A
11/36 EN
4
Preparation
Tips for energy saving
Following information will help you use
the product in an ecological and energyefficient manner.
Wipe away any coarse food remnants on
the dishes before putting them in the
product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Adjusting the water
softening system
Cleaning, rinsing and drying performance of
your dishwasher will increase when water
softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product
according to the steps given below to
determine hardness level of your supply
water.
Water softening system
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water to a level that will
allow washing the dishes with the required
quality.
The mains water hardness must
be softened if it is over 7°dH.
Otherwise, hardness ions will
accumulate on the dishes that
are washed and may affect the
washing, rinsing and drying
performances of the machine.
C
12 /36 EN
Dishwasher / User’s Manual
Preparation
Remove the test
strip from the
packet.
Turn on the tap and Hold the test strip in Remove the test
Wait for 1 minute.
let the water run for the water for about strip from the water
about a minute.
a second.
and shake it.
The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. When the Programme Selection key is at “Off” position, keep Start/Pause/Cancel key
pressed and turn the Programme Selection key to position “1” within 5 seconds. Machine will
enter into the regeneration adjustment mode at the end of this period.
2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator
adjustment mode is activated.
3. To adjust the new Water Hardness Level, move the Programme Selection key to the
position that is suitable for your supply water. (see, “Water Hardness Level Adjustment
Table”)
4. Press Start/Pause/Cancel key for once to store the level you have selected. Machine
returns to the normal operating mode after the new setting is stored.
* Programme Selection key rotates in 5 steps regardless of the number of the programmes
contained on the machine.
5. Press “Start/Pause/Cancel” key for once to store the level you have selected.
Water hardness level adjustment table
English Water
Hardness °dE
0th Level
0-5
0-4
0-8
1
1st Level
6-9
5-7
9-13
1
Washing lamp on the panel will
illuminate.
2nd Level
10-15
8-12
14-22
2
Drying lamp on the panel will
illuminate.
16-19
13-15
23-27
3
End lamp on the panel will illuminate.
20-24
16-19
28-34
4
25-62
20-50
35-90
5
Washing, Drying and End lamps on
the panel will illuminate.
Washing, Drying and End lamps on
the panel will flash with an interval of
1 second.
3rd Level
4th Level
5th Level
German Water French Water
Hardness °dH Hardness °dF
Position of
Program
Water Hardness Level Indicator
Selection Key*
Hardness
Level
If the hardness level of the supply water is above 90 °dF or if you are using well water, then
it is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt in your
dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously
on the panel of your machine.
Dishwasher / User’s Manual
13/36 EN
Preparation
If the water hardness level adjustment is set
to level 1, the “No salt warning indicator” will
illuminate continuously although it is not
necessary to use salt. If you use salt under
this condition, salt will not be consumed and
the Salt indicator will not illuminate.
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.
2. Turn the salt reservoir lid counterclockwise to open it (A).
C
Adding salt
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
C
C
1.
It is recommended to use
granule- or powder-formed
softening salts in the water
softening system. Do not use
salts that do not completely
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system
may deteriorate in time.
Salt reservoir will be filled
with water when you start
the product. For this reason,
add salt before operating the
machine.
Firstly, take the lower basket out to
add softening salt.
14 /36 EN
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.
C
You need to add salt right
before starting the machine.
Thus, the overflowing
salty water will be flushed
immediately, preventing the risk
of corrosion in machine. In cases
where you would not start
washing immediately, run your
machine empty in the shortest
program.
5. Replace the lid and tighten it when the
reservoir is full.
Dishwasher / User’s Manual
Preparation
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
Detergent
You can use powder, liquid/gel or tablet
detergents in the machine.
Only use in the machine
the detergents produced
particularly for use with
dishwashers. We recommend
you not to use detergents that
contain chlorine and phosphate
as they are harmful for the
environment.
A
Adding detergent
Pay attention to the warnings
on the detergent packaging
to get better washing and
drying results. Contact the
manufacturer of the detergent
for further questions.
C
A
2. Put suggested amount of powder,
liquid/gel or tablet detergent in the
reservoir.
C
Inside the detergent dispenser
there are level markings that
help you use appropriate
amount of powder detergent.
When brimful, detergent
dispenser will contain 45 cm³
of detergent. Fill detergent up
to 15 cm³ or 25 cm³ level marks
in the detergent dispenser
according to fullness of the
machine and/or soiling degree
of the dishes. One tablet
is enough if you are using
detergent tablets.
Do not put solvents into the
detergent dispenser. There is
the risk of explosion!
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
1. Push the latch to right to open the
detergent dispenser lid (A).
Dishwasher / User’s Manual
3. Push the lid of the detergent dispenser
to close it. A "click" will be heard when
the lid is closed.
15/36 EN
Preparation
1
C
The best washing performance
in dishwashers is obtained
by using detergent, rinse
aid and water softening salt
individually.
C
C
Observe the instructions of the
detergent manufacturer on
the package when using tablet
detergents.
2
3
C
Use powder or liquid/gel
detergent in short programmes
without prewash since
the solubility of the tablet
detergent changes depending
on the temperature and time.
Tablet detergents
In addition to the conventional tablet
detergents, there are also commercially
available detergent tablets that show
water softening salt and/or rinse aid
effect. Some types of these detergents
contain special-purpose components such
as glass and stainless steel protectors.
These tablets show their effects up to
a certain water hardness level (21°dH).
Water softening salt and rinse aid must
also be used together with the detergent
if the water hardness level is above the
mentioned level.
16 /36 EN
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly on
your glasses after the washing
programme is over when using
a tablet detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the
water hardness level so as to suit the
water supply.
4. Make the appropriate rinse aid
settings.
Dishwasher / User’s Manual
Preparation
Rinse aid
C
1.
The rinse aid used in
dishwashers is a special
combination that aims to
increase drying efficiency and
prevent water or lime stains
on the washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
4. If there are stains on tableware items
after washing, level must be increased
and if there is a blue trace after wiping
them by hand, it must be decreased.
This is set to position 3 as factory
default.
C
C
Open the lid of the rinse aid reservoir
with the help of the latch.
The rinse aid adjustment is
described under "Adjusting
the amount of rinse aid" in
the section for operating the
machine.
Wipe clean any spilled rinse aid
outside the reservoir. Rinse
aid that spilled accidentally
will cause foaming and it will
eventually decrease washing
performance.
Items not suitable for
washing in the dishwasher
••
2. Fill the reservoir until “MAX” level.
••
Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not resistant
to heat, as well as copper and tinplated containers in the dishwasher.
Decorative prints of chinaware
as well as aluminum and silver
items may get discoloured
or tarnished after washing
in the dishwasher just as it
happens in handwashing as
well. Some delicate glass types
and crystals may become dull in
time. We strongly recommend
you to check if the tableware
you are going to purchase is
suitable for washing especially
in the dishwasher.
C
3. Slightly press the point (B) of the
reservoir lid to close it.
Dishwasher / User’s Manual
17/36 EN
Preparation
Placing the dishes into the
dishwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the dishes in
an orderly way.
•• Wipe away any coarse food
remnants (bones, seeds, etc.) on the
dishes before placing them in the
dishwasher.
•• Place thin, narrow pieces in the middle
sections of baskets if possible.
•• Place the heavily soiled and bigger
items in the lower basket and smaller,
delicate and light items in the upper
basket.
•• Place the hollowed dishes such as
bowls, glasses and pans upside down
in the dishwasher. Thus, accumulation
of water in deep hollows is prevented.
To prevent possible injuries,
always place the sharp and
pointed dishes such as service
fork, bread knife, etc. upside
down so as their pointed ends
will face down or they will lie
horizontally in the dish basket.
A
Unload dishes in the lower basket first and
then the dishes in the upper basket.
18 /36 EN
Dishwasher / User’s Manual
Preparation
Suggestions for loading the dishwasher
Improper Loading Of Dishware
Lower basket
Upper basket
Improper Loading Of Dishware
Dishwasher / User’s Manual
19/36 EN
Preparation
Upper basket height
adjustable rack
Use the lower and upper parts of the height
adjustable racks in the upper basket of
the machine by sliding them down or up
according to the heights of the glasses,
cups or etc. (A, B, C).
Upper basket multipurpose
service rack
This accessory located at the upper basket
of your machine allows you to easily wash
pieces such as extra long ladles and bread
knives.
You can lift up the upper basket
multipurpose service rack to remove it if
you do not want to use it.
If you want to use the upper basket
multipurpose service rack again, you can
easily attach it to the side section of your
upper basket.
20 /36 EN
Dishwasher / User’s Manual
Preparation
Collapsible lower basket tines Cutlery basket
There are foldable tines (A) located at the
lower basket of the machine are designed for
an easier placement of large pieces such as
pans, bowls, etc. You can create larger spaces
by folding each tines individually or all of them
at once.
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an
efficient manner.
Since the cutlery basket can be moved (A,
B), you can create more space while placing
your dishes in the lower basket and free up
space for your dishes of different sizes.
To bring the collapsible tines into horizontal
position, grab the tines from mid position and
push them in the directions of arrows (B). To
bring the tines back to vertical position, just
lift them up. Collapsible tines will click into the
latch again (C).
C
Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring the
tines in the middle to horizontal
or vertical position by holding
them from their stems and
pushing in the direction of
arrow.
Dishwasher / User’s Manual
21/36 EN
5
Operating the product
1
12345678-
2 3
4
8 7
6
5
On/Off/Programme Selection key
Rinse Aid indicator
Salt indicator
On/Off Control light
Handle
Programme Follow-up lights
Start/Pause/Cancel key
Half Load function
Keys
On/Off/Programme Selection key
When you use the On/Off/Programme
Selection key to select a programme, the
On Warning control light will become on,
and it will go off when you switch to the
Off position.
Start/Pause/Cancel key
It is used to startup, pause or cancel the
selected program.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
22 /36 EN
4. Put adequate amount of detergent
into the detergent compartment.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
6. Close the door of the dishwasher.
Programme selection
1.
Press On/Off/Programme Selection key
to switch on the product.
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Use the programme selection key to
select the determined programme.
Dishwasher / User’s Manual
Dishwasher / User’s Manual
#
Intensive
70 ºC
Suitable for heavily
soiled dishes, pots
and pans.
Eco *
50 ºC
Most economical
washing programme
for the medium soiled
daily dishes that are
kept waiting.
Programme name
Cleaning temperature
+
+
+
120
17,6
1,65
+
+
+
210
11,5
1,03
Wash
Dry
Duration (min)
Water (I)
Energy (kWh)
1,38
16,2
120
+
+
-
Medium
Daily washing
programme for
normally soiled
dishes.
65 ºC
Clean&Shine
3
1,20
11,8
58
+
+
-
Low - Medium
Daily washing
programme for
normally soiled
dishes in the fastest
way.
60 ºC
Quick&Shine
4
0,80
11,8
30
-
+
-
Low
Suitable for lightly
soiled daily dishes
that are scraped or
pre-cleaned.
35 ºC
Mini
5
23/36 EN
Sensitivity: Public
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference
programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir,
and using the test programme.
High
Medium
Prewash
Degree of Soiling
2
1
Programme number
Programme Table
Operating the product
Operating the product
Auxiliary functions
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soiling,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order
to enable you to save time, water and
energy and to perform a more comfortable
washing with conditions specific to you.
Auxiliary functions may cause
changes in the programme
duration.
C
Half Load function
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as you
like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is enabled, the Half Load
indicator will become on in the function
selection indicator and on the display.
4. Start the programme by pressing Start
/ Pause / Cancel key.
C
24 /36 EN
With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
Starting the programme
To start your machine after selecting the
programme and auxiliary functions, press
Start/Pause/Cancel key.
Your machine performs water
softening depending on the
hardness level of the mains
water. Due to water softening
process the programme
duration may change. The
programme duration can also
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.
C
C
C
Pay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start/Pause/Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Close the door of your
machine and press Start/Pause/
Cancel key again. Programme
will resume running.
After the rinsing step, the
machine will wait silent in pause
mode for some time in order
to have the water remaining in
the machine and on the dishes
drained completely and to have
the water softener cleaned, and
then it will resume running in
drying mode.
Dishwasher / User’s Manual
Operating the product
Programme follow-up
You can track the current step of the
selected programme on the programme
step lights located on the control panel.
If the drying light is on, the
machine will perform silent
drying for 30-60 minutes. At
the end of this period, the
Drying light will go off and the
End light will become on.
C
The End light will become on when the
selected washing programme ends.
Cancelling the programme
1.
Press and hold the Start / Pause /
Cancel key for 3 seconds to cancel the
programme.
2. Release it when the Washing and
Drying lights start flashing. Water in
the machine will be discharged in 45
seconds. The programme will have
been cancelled once the Washing and
Drying lights go off and the End light
becomes on. Then, you can select and
operate a new programme.
C
C
There might be residues of
detergent or rinse aid left in the
machine and/or on the pieces
being washed depending on the
step in which the programme
has been cancelled.
When you set the Programme
Selection Knob to “Off” position,
the washing programme will
end and the machine will be
ready for a new programme
selection. If you end the
washing cycle this way, water
and detergent may remain in
the machine.
Dishwasher / User’s Manual
Salt indicator
Please check the salt indicator to see
whether there is adequate amount of
softening salt in the dishwasher or not.
You need to refill the salt reservoir with
salt whenever the no-salt warning symbol
lights.
Adjusting the water hardness
level is explained in Water
Softening System section.
C
Rinse Aid indicator
Please check the rinse aid indicator to see
whether there is adequate amount of rinse
aid in the dishwasher or not. You need to
refill the rinse aid dispenser with rinse aid
whenever the no rinse aid warning symbol
lights.
Adjusting the amount of
rinse aid
1.
While the Programme Selection Knob
is in “Off” position, press and hold the
function key and turn the Programme
Selection Knob clockwise by one level,
keeping the function key pressed for
2 seconds. At the end of this time,
the machine will enter the rinse aid
adjustment mode.
2. Once the machine has entered the
rinse aid adjustment mode, the stored
rinse aid level will be shown on the
programme follow-up LEDs for 5
seconds.
3. For the new Rinse Aid setting, set the
Programme Selection Knob to the
relevant position.
4. Press Start / Pause / Cancel key for
once to store the level you have
selected.
25/36 EN
Operating the product
5. When you set the Programme
Selection Knob to the “Off” position
again, the machine will enter the
normal mode.
Rinse Aid
Amount
1 dose of
rinse aid is
dispensed.
2 doses of
rinse aid are
dispensed.
3 doses of
rinse aid are
dispensed.
4 doses of
rinse aid are
dispensed.
No rinse aid
dispensed
in washing
programme.
26 /36 EN
Position of
program
selection
knob
1
2
3
4
5
Rinse Aid Adjustment
Indicator
Washing lamp
on the panel will
illuminate.
Drying lamp on
the panel will
illuminate.
End lamp on
the panel will
illuminate.
Washing, Drying
and End lamps
on the panel will
illuminate.
Washing, Drying
and End lamps
on the panel will
flash at 1-second
intervals.
End of programme
End of Programme indicator will light up
once the washing programme is over.
1. Press On/Off/Programme Selection key
to switch off the product.
2. Close the tap.
3. Unplug the machine from the socket.
C
Leave your dishes in the
machine for about 15 minutes
after they are washed in order
to have them cooled. Your
dishes will dry in a shorter time
if you leave the door of your
machine ajar during this period.
This process will increase the
drying effectiveness of your
machine.
Dishwasher / User’s Manual
6
Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if it is
cleaned at regular intervals.
Unplug the product and turn off
the tap before attempting any
cleaning procedures.
A
C
C
Do not use abrasive substances
for cleaning.
Clean the filter and impellers
at least once a week in order
for the machine operates
efficiently.
Cleaning the filters
Clean the filters at least once a week in
order for the machine operates efficiently.
Check if food residues are left on the filters.
If there are food residues on filters, take
them out and clean well under running
water.
1. Turn the micro filter (1) and coarse
filter (2) assembly counter clockwise
and pull it out from its seating.
Cleaning the outer surface
of the product
Wipe the outer surface and door gaskets
of the product gently with a mild cleaning
material and damp cloth. Wipe the "Control
panel" only with a slightly damp cloth.
Cleaning the interior of the
machine
••
••
Clean the interior of the machine and
the tank by running a programme with
or without detergent based on the
degree of soil.
If water has remained in the machine,
drain the water by performing the
procedures under the topic "Canceling
a programme". If the water cannot
be discharged, remove the filters
as specified in the "Cleaning the
filters" section and check if there
are any leftover deposits that have
accumulated at the bottom of the
machine, blocking the water path.
Clean if necessary.
Dishwasher / User’s Manual
2. Pull out the metal/plastic filter (3) from
the seating.
3. Press the two pawls on the coarse
filter inwards and separate the coarse
filter from the assembly.
27/36 EN
Maintenance and cleaning
Cleaning the hose filter
4. Clean all three filters under tap water
by means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the micro
filter. Make sure that it is properly
seated. Turn the coarse filter clockwise
until a "click" sound is heard.
C
C
28 /36 EN
Do not use the dishwasher
without filter.
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check the
filter and the hose regularly and clean them
if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its seat
in the hose.
4. Install the hose to tap.
(depends on model)
Incorrect placement of the filters
will reduce washing efficiency.
Dishwasher / User’s Manual
Maintenance and cleaning
Cleaning the impellers
Clean the impellers at least once a week in
order for the machine operates efficiently.
Lower impeller
Check if the holes on the lower impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. You can pull the
lower impeller up to remove it.
Dishwasher / User’s Manual
Upper impeller
Check if the holes on the upper impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Turn its nut to left
to remove the upper impeller.
Make sure that the nut is tightened well
when installing the upper impeller.
29/36 EN
7 Troubleshooting
Machine does not start.
• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door of the
machine.
• On / Off button is not pressed. >>> Make sure that you have turned on the machine by
pressing the On / Off button.
Dishes are not washed clean
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
• Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper
impellers by hand to make sure that they rotate freely.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged
with food remnants such as lemon pips. Clean the impellers regularly as illustrated in
section “Cleaning and Care”.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
• Filters are installed incorrectly. >>> Check the filter system and make sure that it is
installed correctly.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet
detergents.
• Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount
of detergent according to the soiling degree of your dishes and/or programme
definitions. We recommend you to use tablet detergents for optimum results.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is
closed tightly after adding detergent.
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.
30 /36 EN
Dishwasher / User’s Manual
Troubleshooting
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Machine is unloaded right after the programme is over. >>> Do not unload your
machine right after washing process is completed. Slightly open the door and wait for
evacuation of the steam inside for a while. Unload the dishes after the pieces cool down
to a touchable level. Start unloading process from the lower basket. Thus, dropping of
water remained on a piece at upper basket onto the pieces at lower basket is prevented.
• Selected programme is unsuitable. >>> Since rinsing temperature is low at programmes
with short duration, drying performance will also be low. Select programmes with longer
duration for a higher drying performance.
• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained on kitchen utensils with deteriorated surfaces and it
is not suitable to use such utensils in terms of hygiene as well. Also, water can not flow
easily on deteriorated surfaces. It is not recommended to wash such kitchen utensils in
dishwasher.
It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface
tensions of Teflon and water are different, water droplets will remain as beads
on the Teflon surface.
Tea, cafe or lipstick stains remain on dishes.
• Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
• Surface quality of the kitchen utensils is deteriorated. >>> Tea and cafe stains or other
dye spots may not be cleaned in dishwasher when they have penetrated in deteriorated
surfaces. Desired washing performance can not be obtained on kitchen utensils with
deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as
well. It is not recommended to wash such kitchen utensils in dishwasher.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet detergents.
C
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of
the supply water appropriately and check the water hardness setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while
adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the
filling process. Run the prewash programme to remove the salt that spilled inside the
Dishwasher / User’s Manual
31/36 EN
Troubleshooting
machine. Since the salt granules that will remain under the lid will dissolve during
prewash, causing the lid loosen, check the lid once again at the end of the programme.
There is a different odour in the machine
•
•
C
A new machine has a peculiar odour. It will fade out after a couple of washes.
Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the
machine right after you have put the dishes into it, remove the remnants on the dishes
and run the Prewash programme without detergent every 2 days. In such cases, do not
close the door of the machine completely in order to avoid odour build up in machine.
You can also use commercially available odour removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces.
Pay attention not to spill salt around the salt filling hole while adding salt. Make sure
that the salt reservoir lid is tightly closed after finishing the filling process. Run the
prewash programme to remove the salt that spilled inside the machine. Since the salt
granules that will remain under the lid will dissolve during prewash, causing the lid
loosen, check the lid once again at the end of the programme.
• Salty food remnants have remained on dishes for a long time. >>> If cutlery soiled
with such foods will be kept waiting in machine, dirt must be removed by prewash or
dishes must be washed without being kept waiting.
• Electric installation is not grounded. >>>Check if your machine is connected to the
actual grounding line. Otherwise, the static electric created in the product causes arcs
on the surfaces of metal items creating pores, removing the protective cover on the
surface and causing discoloration.
• Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces
gets damaged and looses its efficiency in time when it gets in contact with cleansers
such as bleach. Do not wash your dishes with bleach.
• Metal items particularly such as knives are used for purposes other then their intended
uses. >>> Protective cover on the edges of knives may get damaged when they are
used for purposes such as opening cans. Do not use metal kitchen utensils out of their
intended uses.
• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is
inevitable; they should not be washed in dishwashers.
• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a
corroded item can migrate to other stainless steel surfaces and cause corrosion on
those surfaces as well. Such items should not be washed in dishwashers.
32 /36 EN
Dishwasher / User’s Manual
Troubleshooting
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to add
detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> Place the
dishes in a way that will not prevent the detergent dispenser lid from opening and the
water going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet
detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged
with food remnants such as lemon pips. Clean the impellers regularly as illustrated in
section “Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.
Decorated glasses and decorated lustre porcelains are not suitable for washing
in the dishwasher. Manufacturers of some glassware and porcelain tableware
items do not recommend washing such kitchen utensils in the dishwashers
either.
Dishes are scratched.
C
•
•
•
C
Kitchen utensils that contains or are made of aluminum should not be washed
in dishwasher.
Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir
lid is tightly closed after finishing the filling process. Run the prewash programme to
remove the salt that spilled inside the machine. Since the salt granules that will remain
under the lid will dissolve during prewash, causing the lid loosen, check the lid once
again at the end of the programme.
Water hardness setting is low or salt level is insufficient >>> Measure the hardness of
the supply water appropriately and check the water hardness setting.
Dishes are not placed orderly in the machine. >>> When placing the glasses and other
glassware into the basket lean them not against other dishes but the edges or racks of
the basket or the glass support tines. Striking of the glasses to each other or to other
dishes due to the impact of water during washing can cause breaks, or scratches on
their surfaces.
Dishwasher / User’s Manual
33/36 EN
Troubleshooting
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid
when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the
supply water appropriately and check the water hardness setting. If your supply water
is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures
(e.g. 60-65°C). You can also use glass protective detergents that are commercially
available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before placing
them into the machine. >>> Hand-wash detergents do not contain antifoam. There is
no need to hand-wash the dishes before placing them into the machine. Removing the
coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with
the help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the programme.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary,
remove the discharge hose, clear the blockage and insert is as illustrated in the user
manual.
C
34 /36 EN
If you cannot eliminate the problem although you follow the instructions in
this section, consult your dealer or the Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
Dishwasher / User’s Manual
8 Guarantee
Guarantee for Refrigeration,
Cooking Appliances, Washing
Machines & Dishwashers.
Please visit the “Support” section on
the Beko website at
www.beko.co.uk to register your
one year warranty.
Your new Beko product is guaranteed
against the cost of breakdown repairs
for one year from the date of the original
purchase.
What is covered?
•• Repairs necessary as a result of faulty
materials, defective components or
manufacturing defect.
•• The cost of functional replacement
parts, but excluding consumable
items.
•• The labour costs of a Beko approved
repairer to carry out the repair
What is not covered?
•• Transit, delivery or accidental damage
or misuse and abuse.
•• Cabinet or appearance parts, including
knobs, flaps, handles or container lids.
•• Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
•• Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
•• Repairs to products used on
commercial or non-residential
household premises.
Dishwasher / User’s Manual
••
Loss of frozen food in freezers or
fridge/freezers. (Food loss insurance
is often included within your
household contents insurance policy,
or may be available separately from
your retailer).
Important notes.
•• Your Beko product is designed and
built for domestic household use only.
•• The guarantee will be void if the
product is installed or used in
commercial or non-residential
domestic household premises.
•• The product must be correctly
installed, located and operated in
accordance with the instructions
contained in the User Instructions
Booklet provided.
•• Professional installation by a qualified
Electrical Domestic Appliance Installer
is recommended for all Washing
Machines, Dishwashers and Electric
Cookers
•• Gas Cookers must only be installed by
a Gas safe (or BORD GAIS) registered
Gas Installer.
•• The guarantee is given only within the
boundaries of the United Kingdom and
the Republic of Ireland.
•• The guarantee is applicable only to
new products and is not transferable
if the product is resold.
•• Beko disclaims any liability for
incidental or consequential damages.
•• The guarantee does not in anyway
diminish your statutory or legal rights.
•• The product guarantee does not
cover damages to plates,glass ware,
cutlery, crockery and also damage to
the product itself as a result of using
these “Three-in-one”, “Two-in-one”
detergents.
35/36 EN
Guarantee
Please keep your purchase receipt or other proof of purchase in a safe
place; you will need to have it should the product require attention under
guarantee.
You should also complete the details below; it will help us assist you when requesting
service. (The model number is printed on the Instruction Booklet and the serial number is
printed on the Rating Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
0845 6004903
Electric Cookers
0845 6004902
Gas&Dual Fuel Cookers
0845 6004905
Washing Machines
0845 6004906
& Dishwashers
or
or
or
or
0345 6004903
0345 6004902
0345 6004905
0345 6004906
Republic of Ireland
All Refrigeration, All Cookers
01 862 3411
Washing Machines & Dishwashers
Before requesting service please check the trouble-shooting guide in the
Operating Instructions as a charge may be levied where no fault is found
even though your product may still be under guarantee.
Service once the manufacturers guarantee has expired.
If you have purchased an extended guarantee please refer to the instructions contained
within the extended guarantee agreement document. Otherwise please call the
appropriate number above where service can be obtained at a charge.
Should you experience any difficulty in obtaining service please contact the Beko
Customer Help-Line.
Tel: 0845 6004911
e-mail: service@beko.co.uk
Beko plc, Beko House, 1 Greenhill Crescent, Watford Hertfordshire,
WD18 8QU, UK
www.beko.co.uk
36 /36 EN
Dishwasher / User’s Manual
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement