Beko DTGC7000 Owner Manual
Dryer
User Manual
DTGC7000 W
DTGC7000 S
DTGC7000 B
EN
2960311511_EN/210717.1605
Please read this user manual first!
Dear Customer,
Thank you for prefering a Beko product. We hope that your product which has been
manufactured with high quality and technology will give you the best results. We advise you
to read through this manual and the other accompanying documentation carefully before
using your product and keep it for future reference. If you transfer the product to someone
else, give its manual as well. Pay attention to all details and warnings specified in the user
manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Read the instructions.
Explanation of symbols
Throughout this user manual the following symbols are used:
C
A
B
Important information or useful hints about usage.
Warning for hazardous situations with regard to life and property.
Warning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Warning against scalding hazard.
Packaging materials of the product are manufactured from recyclable materials in
accordance with our National Environment Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard
them to the dedicated collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
TABLE OF CONTENTS
1 Important safety and
environmental instructions
1.1 General safety..................................................4
1.1.1 Electrical safety......................................... 5
1.1.2 Product safety...........................................6
1.2 Mounting over a washing machine.........8
1.3 Intended use.....................................................9
1.4 Child safety........................................................9
1.5 Compliance with the WEEE regulation
and disposing of the waste product........... 10
1.6 Compliance with RoHS Directive:.......... 10
1.7 Package information.................................. 10
1.8 Technical specifications............................ 11
2 Your Dryer
12
2.1 Overview...........................................................12
2.2 Package Contents.........................................12
3 Installation
13
3.1 Appropriate installation location............13
3.2 Removing the transportation safety
assembly..................................................................13
3.3 Connecting to the drain.............................13
3.4 Adjusting the feet........................................14
3.5 Transportation of the dryer......................14
3.6 Changing the illumination lamp .............14
4 Preparation
15
4.1 Laundry suitable for drying in the dryer.15
4.2 Laundry not suitable for drying in the
dryer..........................................................................15
4.3 Preparing laundry for drying....................15
4.4 Things to be done for energy saving...15
4.5 Correct load capacity...................................15
5 Operating the product
17
5.1 Control Panel...................................................17
5.2 Symbols.............................................................17
5.3 Preparation of drying machine...............17
5.4 Program selection and consumption
tablee....................................................................... 18
5.5 Auxiliary functions...................................... 19
5.6 Warning indicators...................................... 20
5.7 Starting the program.................................. 20
5.8 Child Lock........................................................ 20
5.9 Changing the program after it is
started......................................................................21
5.10 Cancelling the program............................21
5.11 End of program............................................21
6 Maintenance and cleaning 22
6.1 Lint Filter / Loading Door Inner Surface.22
6.2 Cleaning the sensors ................................. 23
6.3 Draining the water tank............................ 23
6.4 For the condenser;......................................24
7 Troubleshooting
25
8 Service
27
8.1 Republic of Ireland....................................... 27
8.2 Service once the manufacturers
guarantee has expired...................................... 27
8.3 UK Mainland & Northern Ireland........... 27
9 Electrical Connection
28
9.1 Attention!........................................................28
9.2 Electrical requirements.............................28
9.3 Fitting a different plug..............................28
9.4 Washer/dryer combination.....................28
1 Important instructions for safety and
environment
This section contains safety instructions that will help
protect from risk of personal injury or property damage.
Failure to follow these instructions shall void any warranty.
1.1 General safety
• The dryer can be used by children at and above 8
years old and by persons whose physical, sensory or
mental capabilities were not fully developed or who
lack experience and knowledge provided that they are
supervised or trained on the safe usage of the product
and the risks it brings out. Children should not play with
the product. Cleaning and maintenance works should not
be performed by children unless they are supervised by
someone.
• Children of less than 3 years should be kept away unless
continously supervised.
• Adjustable feet should not be removed. The gap between
the dryer and the floor should not be reduced with
materials such as carpet, wood and tape. This will cause
problems with the dryer.
• Always have the installation and repairing procedures
carried out by the Authorized Service. Manufacturer
shall not be held liable for damages that may arise from
procedures carried out by unauthorized persons.
• Never wash the dryer by spraying or pouring water onto it!
There is the risk of electric shock!
For the products with a steam function:
• Use only distilled water or water condensed in the water
tank of the machine in steam programs. Do not use mains
water or additives. When using condensed water in the
water tank, it should be filtered and cleared of fibres.
• Do not open the door when steam programs are running.
Hot water may be expelled.
4 / EN
Dryer / User Manual
Important instructions for safety and
environment
• Before putting laundry in a steam program, stains on it
should be removed.
• You may only put laundry that is not dirty or stained
but permeated with unpleasant odour in steam (odour
removal) program.
• Do not use any dry cleaning sets or additional materials in
a steam program or in any program.
1.1.1 Electrical safety
Electrical safety instructions should be followed
while electrical connection is made during the
installation.
The appliance must not be supplied through an
external switching device, such as a timer,or
connected to a circuit that is regularly switched on
and off by utility.
• Connect the dryer to a grounded outlet protected by a
fuse at the value specified on the type label. Have the
grounding installation performed by a qualified electrician.
Our company shall not be liable for any damages that
will arise when the dryer is used without grounding in
accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the
type label plate.
• The voltage specified on the type label must be equal to
your mains voltage.
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation,
maintenance, cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by
pulling on the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to
connect the dryer to power supply in order to decrease the
risk of fire and electric shock.
A
A
Dryer / User Manual
5 / EN
Important instructions for safety and
environment
• Power cable plug must be easily accessible after
installation.
Damaged mains cable should be changed notifying
the Authorized Service.
If the dryer is faulty, it must not be operated unless
it is repaired by an authorized service agent! There is
the risk of electric shock!
1.1.2 Product safety
Superheating of the clothes inside of the dryer can
occur if you cancel the programme or in the event
of a power failure whilst the dryer is running, this
concentration of heat can cause self-combustion and
fire so always activate the ventilation programme
to cool down or quickly remove all laundry from the
dryer in order to hang them up and dissipate the
heat.
B
B
Points to be taken into consideration for fire
hazard:
Below specified laundry or items must not be dried in
the dryer considering fire hazard.
• Unwashed laundry items
• Items soiled with oil, acetone, alcohol, fuel oil,
kerosene, stain removers, turpentine, paraffin or
paraffin removers must be washed in hot water
with plenty of detergent before being dried in the
dryer.
For this reason especially the items containing the
above specified stains must be washed very well, to
do this use adequate detergent and choose a high
washing temperature.
6 / EN
Dryer / User Manual
Important instructions for safety and
environment
Below specified laundry or items must not be
dried in the dryer due to the fire hazard:
• Garments or pillows bolstered with rubber foam
(latex foam), shower bonnets, water resistant
textiles, materials with rubber reinforcement and
rubber foam pads.
• Clothing cleaned with industrial chemicals.
Items such as lighter, match, coins, metal parts,
needle etc. may damage the drum set or may lead to
functional problems. Therefore check all the laundry
that you will load into your dryer.
Never stop your dryer before the programme
completes. If you must do this, remove all laundry
quickly and lay them out to dissipate the heat.
Clothes that are washed inadequately may ignite on
their own and even may ignite after drying ends.
• You must provide enough ventilation in order to prevent
gases exiting from devices operating with other types of
fuels including the naked flame from accumulating in the
room due to the back fire effect.
Underwear that contains metal reinforcements
should not be dried in the dryer. Dryer may be
damaged if metal reinforcements come loose and
break off during drying.
Use softeners and similar products in accordance
with the instructions of their manufacturers.
Always clean the lint filter before or after each
loading. Never operate the dryer without the lint
filter installed.
A
C
C
Dryer / User Manual
7 / EN
Important instructions for safety and
environment
• Never attempt to repair the dryer by yourself. Do not
perform any repair or replacement procedures on the
product even if you know or have the ability to perform
the required procedure unless it is clearly suggested in the
operating instructions or the published service manual.
Otherwise, you will be putting your life and others’ lives in
danger.
• There must not be a lockable, sliding or hinged door that
may block the opening of the loading door in the place
where your dryer is to be installed.
• Install your dryer at places suitable for home use.
(Bathroom, closed balcony, garage etc.)
• Make sure that pets do not enter the dryer. Check the
inside of the dryer before operating it.
• Do not lean on the loading door of your dryer when it is
open, otherwise it may fall over.
• The lint must not be allowed to accumulate around the
tumble dryer
• The tumble dryer is not to be used if industrial chemicals
have been used for cleaning.
• Fabric softeners, or similar products.should be used as
specified by the fabric softener instructions.
• Exhaust air must not be discharged into a flue which is
used for exhausting fumes from appliances burning gas or
other fuels.
1.2 Mounting over a washing machine
• A fixing device should be used between the two machines
when installing the dryer above a washing machine. The
fitting device must be installed by the authorized service
agent.
8 / EN
Dryer / User Manual
Important instructions for safety and
environment
• Total weight of the washing machine and the dryer -with
full load- when they are placed on top of each other
reaches to approx. 180 kilograms. Place the products on a
solid floor that has sufficient load carrying capacity!
Washing machine cannot be placed on the dryer.
Pay attention to the above warnings during the
installation on your washing machine.
A
Installation Table for Washing Machine and Dryer
Washing Machine Depth
Dryer
Depth
62 cm 60 cm 54 cm 50 cm 49 cm
45 cm
40 cm
54 cm
Can be installed
60 cm
Can be installed
Can be
installed
Cannot be
installed
Cannot be
installed
1.3 Intended use
• Dryer has been designed for domestic use. It is not suitable
for commercial use and it must not be used out of its
intended use.
• Use the dryer only for drying laundry that are marked
accordingly.
• The manufacturer waives any responsibility arisen from
incorrect usage or transportation.
• The service life of the dryer that you purchased is 10 years.
During this period, original spare parts will be available to
operate the dryer properly.
1.4 Child safety
• Packaging materials are dangerous for the children. Keep
packaging materials away from children.
• Electrical products are dangerous for the children. Keep
children away from the product when it is operating. Do
not let them tamper with the dryer. Use the child-proof
lock in order to prevent the children to tamper with the
dryer.
Dryer / User Manual
9 / EN
Important instructions for safety and
environment
Child-proof lock is on the control panel.
(See Child lock)
• Keep loading door closed even when the dryer is not in
use.
1.5 Compliance with the WEEE regulation
and disposing of the waste product
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic equipment
(WEEE).
This product has been manufactured with high
quality parts and materials which can be reused and are
suitable for recycling. Do not dispose of the waste product
with normal domestic and other wastes at the end of its
service life. Take it to the collection center for the recycling
of electrical and electronic equipment. Please consult your
local authorities to learn about these collection centers.
1.6 Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS
Directive (2011/65/EU). It does not contain harmful and
prohibited materials specified in the Directive.
1.7 Package information
Packaging materials of the product are manufactured
from recyclable materials in accordance with our National
Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take
them to the packaging material collection points designated
by the local authorities.
C
10 / EN
Dryer / User Manual
Important instructions for safety and
environment
1.8 Technical Specifications
EN
Height (Min. / Max.)
Width
Depth
Capacity (max.)
Net weight (± 4 kg)
Width
Voltage
Rated power input
84,6 cm / 86,6 cm*
59,5 cm
54 cm
7 kg**
34 kg
See type label***
* Min. height: Height with adjustable feet are closed.
Max. height: Height with adjustable feet are opened
maximum.
** Dry laundry weight before washing.
*** Type label is located behind the loading door.
Technical specifications of the dryer are subject to
specification without notice to improve the quality of
the product.
Figures in this manual are schematic and may not
match the product exactly.
Values stated on markers on the dryer or in the other
published documentation accompanying with the
dryer are obtained in laboratory in accordance with
the relevant standards. Depending on operational and
environmental conditions of the dryer, these values
may vary.
C
C
C
Dryer / User Manual
11 / EN
2 Your Dryer
2.1 Overview
11
1
2
10
3
9
8
1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening button
5. Ventilation grids
6. Adjustable legs
7. Kick plate
8. Type label
9. Lint filter
10. Water tank drawer
11. Power cord
4
5
7
6
2.2 Package Contents
1
6
2
7
3
4
5
8
1. Water drain hose *
2. Filter drawer spare sponge*
3. User Manual
4. Drying basket*
5. Drying basket user manual*
6. Water Filling Container*
7. Pure Water*
8. Fragrance Capsules Group*
*It can be supplied with your machine depending on its model.
12 / EN
Dryer / User Manual
3 Installation
Before the calling the nearest Authorized
Service for the installation of the dryer,
ensure that electrical installation and water
drain is appropriate referring to the user’s
manual. If they are not suitable, contact a
qualified electrician and technician to make
necessary arrangements.
C
A
Preparation of the dryer's location
as well as the electrical and
waste water installations is under
customer's responsibility.
B
Do not place the dryer on the
power cable.
A
Remove the transportation safety
assembly before using the dryer
for the first time.
3.2 Removing the
transportation safety
assembly
Prior to installation, visually check
if the dryer has any defects on
it. If the drier is damaged, do
not have it installed. Damaged
products cause risks for your
safety.
3.1 Appropriate installation
location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated,
dust-free environment.
• The gap between the dryer and the
surface should not be reduced by the
materials such as carpet, wood and tape.
• Do not cover the ventilation grills of the
dryer.
• There must not be a lockable, sliding or
hinged door that may block the opening
of the loading door in the place where
your dryer is to be installed.
• Once the dryer is installed, it should stay
at the same place where its connections
have been made. When installing the
dryer, make sure that its rear wall does
not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from
the edges of other furniture.
• Your dryer can be operated at
temperatures between +5°C and +35°C.
If the operating conditions fall outside
of this range, operation of the dryer
will be adversely affected and it can get
damaged.
• The rear surface of the tumble dryer
shall be placed against a wall.
Dryer / User Manual
3.3 Connecting to the drain
You can directly drain accumulated water
through the water drain hose supplied with
the product instead of periodically draining
the water collected in the water tank.
Connecting the water drain hose
1-2 Pull hose at the behind of the dryer
3
4
by hand in order to disconnect it from
where it is connected. Do not use any
tools to remove the hose.
Connect one end of the drain hose
supplied with the dryer to the
connection point from where you
removed the hose of the product in
previous step.
Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
13 / EN
Installation
1
2
3
4
C
C
C
Water drain hose should be
attached to a height of maximum
80 cm.
3.6 Changing the illumination
lamp
In case an illumination lamp is used in your
laundry dryer.To change the Bulb/LED used
for illumination of your tumble dryer, call your
Authorized Service.The lamp(s) used in this
appliance is not suitable for household room
illumination. The intended purpose of this
lamp is to assist the user to place laundry
in the tumble dryer in a comfortable way.
The lamps used in this appliance have to
withstand extreme physical conditions such
as vibrations and temperatures above 50 °C
Make sure that the water drain
hose is not stepped on and it is not
folded between the drain and the
machine.
If there is an accessories pack
supplied with your product, please
see the detailed description.
3.4 Adjusting the feet
•
Turn the feet to left or right until the
dryer stands level and firmly.
3.5 Transportation of the dryer
Drain all water that has remained in the dryer.
If direct water drain connection is made, then
remove the hose connections.
A
14 / EN
We recommend carrying the
dryer in upright position. If it is
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front.
Dryer / User Manual
4 Preparation
4.1 Laundry suitable for drying
in the dryer
Always obey the instructions given on the
garment tags. Dry only the laundry having a
label stating that they are suitable for drying
in a dryer and make sure that you select the
appropriate programme.
Do not dry with
dryer
At high
temperature
At medium
temperature
At low
temperature
4.2 Laundry not suitable for
drying in the dryer
C
Delicate embroidered fabrics,
woollen, silk garments, delicate
and valuable fabrics, airtight
items and tulle curtains are not
suitable for machine drying.
•
•
•
•
•
Do not add wet laundry while the dryer is
in operation
For models with a condenser unit: clean
the condenser once in a month or after
every 30 operations regularly. .
For models with heat pump unit: clean
the filter drawer periodically when there
is a visible accumulation of fluff or when
the filter drawer cleaning indicator «
» lights up.
For models with flue unit: comply with
the flue connection instructions and
clean the flue.
During the drying process, air the
room well where your tumble dryer is
operating.
4.5 Correct load capacity
Follow the instructions in the “Programme
selection and consumption table”. Do not
load more than the capacity values stated in
the table.
4.3 Preparing laundry for
drying
•
•
•
Laundry may be tangled with each other
after washing. Separate the laundry
items before placing them into the dryer.
Dry garments having metal accessories
such as zippers, inside out.
Fasten the zippers, hooks and buckles
and button sheets.
4.4 Things to be done for
energy saving
•
•
•
•
Spin your laundry at the highest speed
possible when washing them. Thus, the
drying time is shortened and energy
consumption is reduced.
Sort out the laundry depending on their
type and thickness. Dry the same type
of laundry together. For example thin
kitchen towels and tableclothes dries
earlier than thick bathroom towels.
Follow the instructions in the user
manual for programme selection.
Do not open the loading door of the
machine during drying unless necessary.
If you must open the loading door, do not
keep it open for a long time.
Dryer / User Manual
15 / EN
Preparation
Following weights are given as examples.
Laundry
Cotton quilt covers
(double)
Cotton quilt covers
(single)
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Small tablecloths
Tea napkins
Bath towels
Hand towels
Blouses
Cotton shirts
Shirts
Cotton dresses
Dresses
Jeans
Handkerchiefs (10
pieces)
T-Shirts
Approximate
weights (g)*
1500
1000
500
350
700
250
100
700
350
150
300
250
500
350
700
100
125
*Dry laundry weight before washing.
16 / EN
Dryer / User Manual
5 Operating the product
5.1 Control Panel
1
1.
2.
3.
4.
4
3
On/Off/Program selection button
Start/Pause button
End Time button
Audio warning level button
2
5.2 Symbols
Tank
full
End/anticreasing
Filter
cleaning
Condenser Child-proof
cleaning
lock
warning symbol
On/Off
Timer
Delay
Dryness
Level
Mute
Volume up
Cupboard
Dry
5.3 Preparation of drying
machine
•
•
•
•
Plug the drying machine.
Open the loading door.
Place the laundry to the drying machine
without jamming them.
Push and close the loading door.
A
Ensure that no laundry is jammed
to the loading door.
Dryer / User Manual
Iron Dry
Select the desired program using the On/
Off/Program selection knob, the machine will
turn on.
C
Selecting a program using the
On/Off/Program selection
button does not mean that the
program started. Press the Start
/ Stand-by button to start the
program.
17 / EN
Operating the product
5.4 Programme selection and consumption tablee
Programmes
Programme Description
Capacity (kg)
Spin speed
in washing
machine (rpm)
Drying Time
(minutes)
EN
Cotton Iron Dry
You may dry your cotton laundry to be ironed in
this programme to have them slightly damp for
ease ofironing. (Shirt, T-shirt, tablecloth, etc.)
7
1000
90
Cotton Cupboard Dry
You may dry all your cotton laundry in this
programme.(T-shirt, pants, pyjamas, baby
clothes, underwear,linen, etc.) You can put your
laundry in thewardrobe without ironing.
7 / 3,5
1000
121 / 72
7
1000
126
7
1000
131
You may use this programme for extra dryness
Cotton Cupboard Dry inthick laundry such as pants, tracksuit.
Plus
You can put your laundry in the wardrobe
withoutironing.
Cotton Extra Dry
You may dry your thick cotton laundry in this
programmesuch as towels, bathrobe, etc. You
can putyour laundry in the wardrobe without
ironing.
Synthetic Iron Dry
You may dry your synthetic laundry to be ironed
inthis programme to have them slightly damp for
easeof ironing. (Shirt, T-shirt, tablecloth, etc.)
3,5
800
35
Synthetic Cupboard
Dry
You may dry all your synthetic laundry in
this programme.(Shirt, T-shirt, underwear,
tablecloth, etc.)You can put your laundry in the
wardrobe without ironing.
3,5
800
48
Sport
You may dry your sports clothes that
are appropriate for tumble drying in this
programme.
4
1000
92
Freshen up
It just provides airing for 10 minutes without any
hot air. You can air the cotton and linen laundry
that have been stored for a long time , and
eliminate the odour in them.
-
-
10
Time Proggammes
You may select from time programmes between
10 and 30 and 60 minutes to achieve the
desired drying level at low temperature. In this
programme, tumble drier’s operation lasts for
the set time independently from the dryness of
laundry.
-
-
-
Babyprotect
Program used for baby clothing with can be
dried approval on the label.
3
1000
80
Jeans
You may dry denim pants, skirts, shirts or jackets
in this programme.
4
1200
80
18 / EN
Dryer / User Manual
Operating the product
Gentle Care / Shirts
You may dry your delicate laundry or laundry
with hand wash symbol (silk blouses, thin
underwear, etc.) at low temperature in this
program.
Express Super Short
Dries shirts more delicately and thus causes less
wrinkles for easy ironing.
2
600
40
0,5
1200
14
Spin speed
in washing
machine
(rpm)
Approximate
amount of
remaining
humidity
Energy
consumption
value kWh
Energy consumption values
Programs
Capacity (kg)
Cotton cupboard dry*
Cotton Iron dry
Synthetic cupboard
dry
7 / 3,5
1000
60%
4,21 / 2,31
7
1000
60%
3,25
3,5
800
40%
1,42
Power consumption of the off-mode for the standart cotton programme at full load, PO (W)
0,5
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W)
1,0
“Cotton cupboard dry programme” used at full and partial load is the standard drying
programme to which the information in the label and the fiche relates, that this programme
is suitable for drying normal wet cotton laundry and that it is the most efficient programme in
terms of energy consumption for cotton.
* : Energy Label standard program (EN 61121:2012)
All the values on the chart are identified according to EN 61121:2012 standard. Consumption
values may vary from the values in the chart depending on laundry type, wringing speed,
ambient conditions and voltage levels.
5.5 Auxiliary functions
Audible warning
Drying machine makes an audible warning
when the program is completed. If you don’t
want it to make an audible warning, press the
“Buzzer” button. When you press the Buzzer
button, a light will illuminate and no audible
warning will be made when the program
ends.
C
You can select this function
before or after the program
starts.
Dryer / User Manual
End time
If you prefer to dry your laundry at a later
time, you can delay start time of the program
up to 3 hours, 6 hours or 9 hours using the
Delay function.
Open the loading door and place the laundry.
Select the drying program.
Press the End Time selection button and
set the delay time you wish. When the End
Time button is pressed once, 3 hours delay is
selected and the delay indicator will light up.
If you press the same button again, 6 hours
delay will be selected and when you press for
the third time, 9 hours delay will be selected.
If you press the End Time button once again,
the delay will be cancelled.
After the End Time selection is made, start
delayed running for the program selected
pressing the “Start/Stand-by” button.
19 / EN
Operating the product
C
You can add or remove laundry
within end time. At the end of
the Time Delay countdown, the
Time Delay warning indicator
turns off and drying begins
Changing the end time
If you want to change the duration during
the countdown:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the End Time selection
process.
Cancelling the end time function
If you want to cancel the end time
countdown and start the program
immediately:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and press the Start/Stand-by
button.
5.6 Warning indicators
C
Warning indicators may vary
depending on the model of your
dryer.
Filter cleaning
When the program is completed, the warning
indicator for filter cleaning turns on.
Water tank
When the program is completed, the warning
indicator to empty the water tank turns on.
If the water tank fills up while the program
continues, the warning indicator starts
flashing and the machine goes into stand-by.
In this case, empty the water tank and start
the program by pressing the Start / Standby button. Warning indicator turns off and
program resumes.
Condenser
Clean the condenser periodically when there
is a visible accumulation of fluff or when the
condenser cleaning indicator «
» lights
up, if any.
20 / EN
5.7 Starting the program
Press the Start/Stand-by button to start the
program.
Drying indicator will light up, indicating that
the program has started.
5.8 Child Lock
The drying machine has a child lock which
prevents the program flow from being
interrupted when the buttons are pressed
during a program. When the child lock is
activated, all buttons on the panel except
the On/Off/Program selection knob are
deactivated.
Press the End Time and Buzzer buttons
simultaneously for 3 buttons to activate the
child lock.
The child lock has to be deactivated to be
able to start a new program after the current
program is finished or to be able to interfere
with the program. To deactivate the child
lock, keep the same buttons pressed for 3
seconds.
C
C
When the child lock is activated,
the child lock warning indicator
on the screen turns on.
Child lock deactivates when the
drying machine is turned off and
on by the On/Off/Cancel knob.
When the child lock is active:
When the drying machine runs, or in standby state, the indicator symbols won’t change
upon changing the position of the program
selection knob.
C
When the drying machine runs
and the child lock is active, it
beeps twice when the program
selection knob is turned. If the
child lock is deactivated without
returning the program selection
knob to its previous position,
program will terminate due
to the change in the program
selection knob position.
Dryer / User Manual
Operating the product
5.9 Changing the program
after it is started
You can change the program you selected
to dry your laundry with a different program
after the drying machine starts running
• For instance, select Extra Dry program
by turning the On/Off/Program selection
knob to select Extra Dry instead of Iron
Dry.
• Press the Start/Stand-by button to start
the program.
Adding and removing clothes during
stand-by
If you want to add or remove clothes to/from
the drying machine after the drying program
starts:
• Press the Start/Stand-by button to put
the drying machine in Stand-by state.
The drying operation stops.
• Open the loading door while in Standby state, and close the door after you
remove or add laundry.
• Press the Start/Stand-by button to start
the program.
C
C
C
Adding laundry after the drying
operation starts may cause the
dried laundry inside the machine
to mix with wet laundry and
leave the laundry damp at the
end of operation.
Adding or removing laundry
during drying may be
repeated as many times as
you wish. But this operation
continuously interrupts the
drying operation, and thus
increases program duration and
energy consumption. So, it is
recommended to add laundry
before the program starts.
Do not touch the inner surface
of the drum while adding or
removing clothes during a
continuing program. The drum
surface is hot.
5.10 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any
reason after the drying machine starts
running, turn the On/Off/Cancel knob, the
program will be cancelled.
A
The inside of the drying machine
shall be extremely hot when
you cancel the program during
machine operation, so run the
refresh program to allow it to
cool down.
5.11 End of program
When the program ends, the Fibre Filter
Cleaning and Water Tank warning symbols on
the program observation indicator turn on.
Loading door may be opened and the dryer
machine becomes ready for another run.
Bring the On/Off/Program selection knob to
On/Off position to turn the drying machine
off.
C
If the laundry is not removed
after the program is completed,
the wrinkle prevention function
activates for 2 hours to prevent
the laundry inside the machine
to get wrinkled. The program
tumbles the laundry with
10-minute intervals to prevent
them from wrinkling.
If a new program is selected by
turning the program selection
knob while the drying machine is
in stand-by, the running program
terminates.
Dryer / User Manual
21 / EN
6 Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
B
Unplug the product from the
mains during any maintenance
and cleaning works (control
panel, body, etc.).
C
A layer can build up on the filter
pores that can cause clogging of
the filter after using the machine
for a while. Wash the lint filter
with warm water to remove the
layer that builds up on the lint
filter surface. Dry the lint filter
completely before reinstalling it.
C
Clean the entire inner surface of
the loading door and loading door
gasket.
6.1 Lint Filter / Loading Door
Inner Surface
Lint and fiber released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
A
C
Always clean the lint filter and
the inner surfaces of the loading
door after each drying process.
You can clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and
open the lint filter.
3. Clean lint, fiber, and cotton raveling by
hand or with a soft piece of cloth.
4. Close the lint filter and place it back into
its housing.
22 / EN
Dryer / User Manual
Maintenance and cleaning
6.2 Cleaning the sensors
There are dampness sensors in the machine
that detect whether the laundry is dry or not.
To clean the sensors:
1. Open the loading door of the machine.
2. Allow the machine to cool down if it is
still hot due to the drying process.
3. Wipe the metal surfaces of the sensor
with a soft cloth, dampened with vinegar
and dry them.
C
C
A
If you forget to drain the water tank, the
machine will stop during the subsequent
drying cycles when the water tank is full and
the Water Tank warning symbol will flash.
If this is the case, drain the water tank and
press Start / Pause button to resume the
drying cycle.
To drain the water tank:
1. Remove the water tank in the drawer or
container carefully.
Clean metal surfaces of the
sensors 4 times a year.
Do not use metal tools when
cleaning metal surfaces of the
sensors.
CAUTION: Never use solvents,
cleaning agents or similar
substances for cleaning due to
the risk of fire and explosion!
2.
Drain the water in the tank.
3.
If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
Place the water tank into its seat.
4.
6.3 Draining the water tank
Dampness of the laundry is removed and
condensed during drying process and the
water that arise accumulates in the water
tank. Drain the water tank after each drying
cycle.
A
A
Condensed water is not drinkable!
CAUTION: Never remove the
water tank when the program is
running!
Dryer / User Manual
23 / EN
Maintenance and cleaning
6.4 For the condenser;
Hot and humid air in the condenser is cooled
with the cold air from the room. Thus,
the humid air circulating in your dryer is
condensed and then pumped into the tank.
C
4. Clean the condenser by applying
pressurized water with a shower
armature and wait until the water drains.
Clean the condenser after every
30 drying cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out,
open the door of the machine and wait
until it cools down.
5. Place the condenser in its housing. Fasten
the 2 locks and make sure that they are
seated securely.
2. Unlock the 2 condenser locks after
opening the kick plate.
6. Close the kick plate cover.
3. Pull out the condenser.
24 / EN
Dryer / User Manual
7 Troubleshooting
Drying operation takes too long.
• Fibre filter pores might be clogged. >>> Wash the filter with warm water.
• Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer. (for the products with a heat pump)
• The condenser might be blocked. >>> Wash the condenser.(for the products with a
condenser )
• The ventilation grills in front of the machine may be closed. >>> Remove any objects in
front of the ventilation grills that blocks air.
• Ventilation may be inadequate because the area the machine is installed in is too small.
>>> Open the door or windows to prevent the room temperature from rising very high.
• A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity
sensor.
• Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher speed wringing
on the washing machine.
Clothes come out damp after drying.
• A program not suitable for the laundry type may have been used.>>> Check the
maintenance labels on the clothes and select a program suitable for the clothes’ type or
use time programs as extra.
• Fibre filter pores might be clogged. >>> Wash the filter with warm water.
• The condenser might be blocked. >>> Wash the condenser. (for the products with a
condenser)
• Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer.(For the products with a heat pump)
• Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher speed wringing
on the washing machine.
Drying machine does not turn on or program cannot be started. Drying machine does not
run after it is configured.
• Power plug might be unplugged. >>> Make sure the power cord is plugged in.
• Loading door might be open. >>> Ensure that the loading door is properly closed.
• A program might not be set or Start/Stand-by button might not be pressed. >>> Check
that the program is set and it is not in Stand-by position.
• Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
• Loading door might not be closed completely. >>> Ensure that the loading door is
properly closed.
• There might be a power outage. >>> Press the Start/Stand-by button to start the
program.
• Water tank may be full. >>> Empty the water tank.
Dryer / User Manual
25 / EN
Troubleshooting
Clothes have shrunk, hardened or spoiled.
• A program not suitable with the laundry type might have been used. >>> Check the
maintenance labels on the clothes and select a program suitable for the clothes.
The lighting inside the drying machine does not turn on. (For models with a lamp)
• Drying machine might not be turned on with the On/Off button or program might not
be selected for machines without an On/Off button. >>> Make sure that the drying
machine is turned on.
• Lamp might be malfunctioning. >>> Contact Authorized Service to replace the lamp.
Filter cleaning warning symbol/LED is on/flashing.
• Fibre filter might not be cleaned. >>> Clean the filter.
• The filter slot might be clogged with lints. >>> Clean the filter slot.
• A layer of fluff might have accumulated clogging up the lint filter pores. >>> Wash the
filter with warm water.
• The condenser might be blocked. >>> Wash the condenser.
Water drips from the loading door.
• Fibres might have gathered on the inner sides of the loading door and the loading door
gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket
surfaces.
Loading door opens by itself.
• Loading door might not be closed completely. >>> Push the loading door until the
closing sound is heard.
Water tank warning symbol / led is on/flashing.
• Water tank may be full. >>> Empty the water tank.
• Water discharge hose might have collapsed. >>> If the product is connected directly to
the water drain check the water discharge hose.
Steam symbol is flashing.(For the products with a steam function)
•
Steam tank may be empty => Fill the steam tank with distilled or condensed water.
Steam programs do not start (For the products with a steam function)
•
Steam tank may be empty, steam tank warning icon may light up on the screen => Fill
the steam tank until the steam icon goes off.
Wrinkles are not removed with wrinkle removing program. (For the products with a steam
function)
• Excess amount of laundry may have been placed => Place specified amount of laundry.
• Steam application time may be selected in low level => Choose a program with high
amount of steam.
• After completion of the program, the laundry may have stayed in the machine for a long
time => Take the laundry out as soon as the program finishes, and hang it out.
Laundry odour not lessened with the odour removal program.(For the products with an
odour removal program)
• Excess amount of laundry may have been placed => Place specified amount of laundry.
• Steam application time may be selected in low level => Choose a program with high
amount of steam.
A
26 / EN
If the problem persists after following the instructions in this section, contact your
vendor or an Authorized Service. Never try to repair your product yourself.
Dryer / User Manual
8
Service
Please keep your purchase receipt or other
proof of purchase in a safe place; you will
need to have it should the product require
attention under guarantee.
You should also complete the details below;
it will help us assist you when requesting
service. (The model number is printed on the
Instruction Booklet and the serial number
is printed on the Rating Label affixed to the
appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
8.1 Republic of Ireland
All Refrigeration, 01 862 3411
All Cookers
Washing Machines & Dryers, Tumble Dryers
Dishwashers
Before requesting service please check the
trouble-shooting guide in the Operating
Instructions as a charge may be levied where
no fault is found even though your product
may still be under guarantee.
Dryer / User Manual
8.2 Service once the
manufacturers guarantee has
expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please call
the appropriate number above where service
can be obtained at a charge.
Should you experience any difficulty
in obtaining service please contact the
Customer Help-Line.
Tel: 0845 600 4911
For service under guarantee simply
telephone the appropriate number below.
8.3 UK Mainland & Northern
Ireland
Fridges & Freezers 0345 600 4903 or 0845
600 4903
Electric Cookers 0345 600 4902 or 0845
600 4902
Gas & Dual Fuel Cookers
0345 600 4905 or 0845 600 4905
Washing Machines & Tumble Dryers
0345 600 4906 or 0845 600 4906
27 / EN
9 Electrical Connection
Make sure that you have an earthed power
outlet socket rated at 13 amps (minimum).
9.1 Attention!
When installed, the socket must be reachable
after installation, or a separate switch (which
can disconnect the two poles) must be used
in the installation. Check for suitability.For a
permanent connection, a master switch with
at least 3mm contact clearance and minimum
13 A rating must be used.
9.2 Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position. Should the mains lead
of the appliance become damaged or need
replacing at any time, it must be replaced by
a special purpose made mains lead which can
only be obtained from a Authorised Service
Agent.
A
Do not operate without the top
cover fitted. Risk of injury.
Important
9.3 Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1 Connect the green - yellow or green (earth)
wire to the terminal in the plug marked ‘E’
or with the symbol or coloured green and
yellow or green.
2 Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or coloured
black.
3 Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or coloured
red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Green and yellow
or green
Warning
This appliance must be earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must be
used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the
plug must not be used until a replacement
fuse cover has been fitted. Colour of the
replacement fuse cover must be the same
colour as that visible on the pin face of the
plug. Fuse covers are available from any good
electrical store.
In order to avoid hazards, damaged supply
cord should be replaced by the manufacturer,
its service agent or similarly qualified people.
Built-under installation
This appliance can be installed under a
worktop.
28 / EN
A
A
N
Blue or black
L
Brown or red
9.4 Washer/dryer combination
Do not stack washing machine on top of
the tumble dryer. This would damage both
appliances and guarantees would become
void. It is also unsafe to stack an appliance
on top of another without using a suitable
and approved stacking kit obtained from the
manufacturer of the appliances.
• A special stacking kit is required as an
optional extra please contact customer
service.
Dryer / User Manual
PRODUCT FICHE
Complying Commission Delegated Regulation (EU) No 392/2012
BEKO
Supplier name or trademark
DTGC7000 W / DTGC7000 S /
DTGC7000 B
Model name
7
Rated capacity (kg)
Air Vented
Type of Tumble Dryer
Energy efficiency class
Condenser
B
(1)
Annual Energy Consumption (kWh)
-
(2)
Type of Control
504
Automatic
Non-automatic
-
Energy consumption of the standard cotton programme at full load (kWh)
4,21
Energy consumption of the standard cotton programme at partial load (kWh)
2,31
Power consumption of the off-mode for the standart cotton programme at full load, PO (W)
0,5
Power consumption of the left-on mode for the standart cotton programme at full load, P L (W)
1,0
The duration of the left on mode (min)
30
Standard cotton programme (3)
-
Programme time of the standard cotton programme at full load, T dry (min)
121
Programme time of the standard cotton programme at partial load, Tdry1/2 (min)
72
Weighted programme time of the standard cotton programme at full and partial load (T t)
93
Condensation efficiency class (4)
B
Average condensation efficiency of the standard cotton programme at full load, C dry
81%
Average condensation efficiency of the standard cotton programme at partial load, C dry1/2
81%
Weighted condensation efficiency of the standard cotton programme at full load and partial load, C t
81%
Sound power level for the standard cotton programme at full load (5)
65
-
Built-in
: Yes
- : No
(1) Scale from A+++ (most efficient) to D (least efficient)
(2) Energy consumption based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of
the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.
(3) "Cotton cupboard dry programme" used at full and partial load is the standard drying programme to which the information in the
label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient
programme in terms of energy consumption for cotton
(4) Scale from G (lest efficient) to A (most efficient)
(5) Weighted average value — L WA expressed in dB(A) re 1 pW
Guarantee
Your new product is guaranteed against the cost of breakdown repairs for twelve months from
the date of the original purchase.
What is covered?
•
•
•
Repairs necessary as a result of faulty materials, defective components or manufacturing
defect.
The cost of functional replacement parts, but excluding consumable items.
The labour costs of a approved repairer to carry out the repair.
What is not covered?
•
•
•
•
•
•
Transit, delivery or accidental damage or misuse and abuse.
Cabinet or appearance parts, including knobs, flaps, handles or container lids.
Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery
baskets, filters and light bulbs.
Repairs required as a result of unauthorised repair or inexpert installation that fails to
meet the requirements contained in the user instruction book.
Repairs to products used on commercial or non-residential household premises.
Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included
within your household contents insurance policy, or may be available separately from your
retailer).
Important notes
•
•
•
•
•
•
•
•
•
Your product is designed and built for domestic household use only.
The guarantee will be void if the product is installed or used in commercial or nonresidential domestic household premises.
The product must be correctly installed, located and operated in accordance with the
instructions contained in the User Instructions Booklet provided.
Professional installation by a qualified Electrical Domestic Appliance Installer is
recommended for all Washing Machines,Tumble Dryers, Dishwashers, Dryers and Electric
Cookers
Gas Cookers must only be installed by a Gas safe registered Gas Installer.
The guarantee is given only within the boundaries of the United Kingdom and the
Republic of Ireland.
The guarantee is applicable only to new products and is not transferable if the product is
resold.
Disclaims any liability for incidental or consequential damages.
The guarantee does not in anyway diminish your statutory or legal rights.
Beko plc, Beko House, 1 Greenhill Crescent, Watford, WD18 8QU
Tel: 0845 6004911
Email: service@beko.co.uk
Fax: 0845 6004922
www.beko.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement