Cadet | TH106 | Specification | Cadet TH106 Specification

TH106
Ultimate, programmable
control
Save on your heating bill with the TH106 programmable
digital thermostat. Its precise temperature-sensing control
brings comfort to your room with simple programming.
Battery-free backup, silent operation, and an early-start
function ensure that you’re always in control.
• Customize your settings, or choose from
pre-programmed options
• Push-button programming and override
options with large LCD display that’s easy
to read
• Set for 15-second cycles for baseboard
heaters, or 5-minute cycles for fan heaters
• Controls up to 2,000 watts at 120 volts,
4,000 watts at 240 volts or 3,470 watts at
208 volts
• Ideal performance for electric baseboard
and wall heaters
• Comfort range: 1 degree
ARCHITECTURAL - ENGINEERING INFORMATION
Electronic thermostat is UL listed for USA and Canada. Line voltage
temperature control shall be digital with LCD display. Switching means
shall be by “triac switching action” to eliminate RF line noise. The
control is capable of switching a maximum resistive load of 16.7 amps
at 240 volts. Minimum load requirement 2 amps. LCD display shall show
time of day, actual room temperature, mode and current status of the
heater. Programming choices are 7-day with 4 daily settings and early
start function. Unit shall have a default temperature program of 62°F
(16.5°C). Vented housing shall be white and made of flame retardant
high impact plastic with two mounting screws provided. No batteries
shall be required for operation.
TECHNICAL INFORMATION
Set point range: 40°F to 86°F (5°C to 30°C)
Device shall have ability to retain programming indefinitely. Time setting
must be readjusted if power outage lasts more than 2 hours.
Product Dimensions:
5"W x 4-15/16"H x 1-1/2"D
16.7 amps maximum load
UPC/PART
MODEL
DESCRIPTION
027418 08160 5
TH106
Electronic programmable, single pole, retail pack
VOLTS
AMPS
120/240/208
16.7
cadetheat.com
855.CADET.US
Vancouver, Washington
Q2 2016

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project