Continental Refrigerator SW72N18-FB-D Spec Sheet

Continental Refrigerator SW72N18-FB-D Spec Sheet
SANDWICH UNIT REFRIGERATOR
Model: SW72N18-FB-D
Project Name:
Model Specified:
Natural Refrigerant R-290 Model
72” Standard Top Sandwich Unit
Refrigerator with Drawers - 18 Pans
Front Breathing
Stainless steel front, top and end panels, aluminum back and interior.
Location:
Item No:
Quantity:
AIA #:
SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated refrigeration system
Natural, environmentally-safe,
high-efficiency R-290 refrigerant1
Unique air flow distribution allows
pan product to maintain 33° - 41°F
Automatic, hot gas condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, back mounted compressor
Expansion valve system
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation
Smooth, polished chrome drawer handles
Stainless steel roll-out drawers
Magnetic snap-in drawer gaskets
Options and Accessories
(upcharge and lead times may apply)
Stainless steel interior
Rear-mounted cutting board
Stainless steel back
Composite cutting board
Overshelves (single or double)
Flat insulated night covers
Drawer locks
Vision panel lids
Crumb catcher
Modified pan openings
Automatic, electric condensate evaporator
12” deep, full length nylon cutting board
Insulated lids
Completely enclosed, vented and removable case back
3 3/4” casters
MODEL FEATURES
(18) 1/6 size recessed pans, 4” deep
Removable interior tub below pans
Electronic controller w/digital display & hi-low alarm
Consult factory for other model configurations, options and accessories.
1
R-290 refrigerant meets all federal and state regulatory requirements.
Front breathers are a unique, field assembled, bottom mounted ventilation
system designed to allow cabinets to be flush against a wall or built into a
counter to conserve space. For proper operation, the area under and in front
of the cabinet must not be obstructed in any way.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.)
20.6 (583 cu l)
1/6 Size Pans (4” deep)
18
Width, Overall (in.)
72 (1829 mm)
Depth, Overall (in.)
72”
(1829 mm)
32 3/16 (818 mm)
(incl. handles & bumpers)
Depth, Cutting Board (in.)
HOOD
HOOD
12 (305 mm)
Height, Overall (in.) (incl. 3 3/4” casters) 41 (1041 mm)
No. of Drawers
6
REFRIGERANT DATA
Condensing Unit Size (H.P.)
1/3+
Capacity (BTU/Hr)*
2560
ELECTRICAL DATA
Voltage (int’l)
115/60/1 (220/50/1)
Total Amps (int’l)
6.1 (4.7)
10 ft. Cord/Plug [attached] (int’l)
Yes (No)
FRONT VIEW
SHIPPING DATA
Weight (lbs.)
389 (176 kg)
Height - Crated (in.)
43 1/4 (1099 mm)
Width - Crated (in.)
80 (2032 mm)
Depth - Crated (in.)
37 1/4 (946 mm)
32 3/16”
(818 mm)
30”
(762 mm)
1”
(25 mm)
10 11/16”
(271 mm)
DRAWER PAN CONFIGURATIONS
Two Tier: (1) 1/2 size x 6 & (1) 1/3 x 6 pan per drawer
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
41”
30 1/4” (1041 mm)
(768 mm)
3 3/4” (95 mm)
Equipped with one NEMA-5-15P Plug
(varies by country)
SIDE VIEW
27 1/2”
(699 mm)
05/27/10
72”
(1829 mm)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
13/16”
(21 mm)
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
30”
(762 mm)
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
3 7/16”
(87 mm)
11 13/16”
(300 mm)
®
MADE IN THE U.S.A.
© Copyright 2019. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
PAN TOP CONFIGURATION
SW72N18-FB-D (6/15/19)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement