Continental Refrigerator BB69SNSSSGDPT Spec Sheet

Continental Refrigerator BB69SNSSSGDPT Spec Sheet
BACK BAR EQUIPMENT
Model: BB69SNSSSGDPT
Natural Refrigerant R-290 Model
69” Back Bar Display Pass-Thru
Cooler with Sliding Glass Doors
Shallow Depth
Stainless steel exterior, countertop, interior back and side panels
with reinforced stainless steel floor.
Project Name:
Model Specified:
Location:
Item No:
Quantity:
AIA #:
SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated front breathing refrigeration system
Natural, environmentally-safe,
high-efficiency R-290 refrigerant1
Automatic, hot gas condensate evaporator
Extra large, balanced evaporator coil
CABINET ARCHITECTURE
High density, non-CFC polyurethane
foamed-in-place insulation
Double pane, tempered low-e sliding glass doors
Front, rear and side venting louvered grills
Stainless steel reinforced threshold
MODEL FEATURES
Low profile cabinet design
Options and Accessories
(upcharge and lead times may apply)
Add’l epoxy-coated shelves
Condensing unit on right
Stainless steel shelves
Wine rack
Food storage rated stainless steel interior (NSF-7)
Casters or legs
Riser base* (field installed)
Door locks
Electronic controller w/digital display & hi-low alarm
LED interior lighting
Easily accessible and serviceable slide-out condensing unit
1
R-290 refrigerant meets all federal and state regulatory requirements.
Consult factory for other model configurations, options and accessories.
* Adding a Riser Base increases overall height 2”
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.)
18 (510 cu l)
Width, Overall (in.)
69 (1753 mm)
Depth, Overall (in.) (incl. top)
25 (635 mm)
Depth, Body Only (in.) (less doors)
21 (533 mm)
Height, Overall (in.)
34 3/4 (883 mm)
Capacity: # Barrel Kegs
3
Capacity: # Straight Wall Kegs
3
Capacity : # 1/6 Size Kegs
10
No. of Doors
4
No. of Shelves
4
69”
(1753 mm)
34 3/4”
(883 mm)
53 7/16”
(1357 mm)
REFRIGERANT DATA
Condensing Unit Size (H.P.)
1/4
Capacity (BTU/Hr)*
2250
FRONT VIEW
ELECTRICAL DATA
Voltage (int’l)
115/60/1 (220/50/1)
Feed Wires (incl. ground)
3
Total Amps (int’l)
3.7 (3.4)
10 ft. Cord/Plug [attached] (int’l)
Yes (No)
SHIPPING DATA
Weight (lbs.)
445 (202 kg)
Height - Crated (in.)
46 (1168 mm)
Width - Crated (in.)
78 (1981 mm)
Depth - Crated (in.)
42 (1067 mm)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
24 1/2”
(622 mm)
CLEAR
DOOR
OPENING
IMPORTANT NOTE: Models are completely front breathing and take in and exhaust air through the front
grill. For proper operation, the area in front and back of the cabinet must not be obstructed in any way.
A clearance of 3” on the sides is recommended.
REAR VIEW
25”
(635 mm)
Equipped with one NEMA-5-15P Plug
(varies by country)
05/27/10
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
31”
(787 mm)
25 1/8”
(638 mm)
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2019. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
SIDE VIEW
21”
(533 mm)
BB69SNSSSGDPT (6/15/19)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement