Continental Refrigerator D27N12M-FB-D Spec Sheet

DESIGNER LINE SANDWICH UNIT
Model: D27N12M-FB-D
Project Name:
Model Specified:
Natural Refrigerant R-290 Model
27” Mighty Top Sandwich Unit
Refrigerator with Drawers - 12 Pans
Front Breathing
Stainless steel front, top and end panels and interior.
Location:
Item No:
Quantity:
AIA #:
SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated refrigeration system
Natural, environmentally-safe,
high-efficiency R-290 refrigerant1
Unique air flow distribution allows
pan product to maintain 33° - 41°F
Automatic, hot gas condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, back mounted compressor
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation
Smooth, polished chrome drawer handles
Stainless steel roll-out drawers
Magnetic snap-in drawer gaskets
8” deep, full length nylon cutting board
Options and Accessories
(upcharge and lead times may apply)
Stainless steel back
Composite cutting board
Overshelves (single or double)
Flat insulated night cover
Drawer locks
Vision panel lid
Rear-mounted cutting board
Modified pan openings
Consult factory for other model configurations, options and accessories.
Insulated lid
Completely enclosed, vented and removable case back
3 3/4” casters
MODEL FEATURES
(12) 1/6 size recessed pans, 4” deep
Removable interior tub below pans
Electronic controller w/digital display & hi-low alarm
1
R-290 refrigerant meets all federal and state regulatory requirements.
Front breathers are a unique, field assembled, bottom mounted ventilation
system designed to allow cabinets to be flush against a wall or built into a
counter to conserve space. For proper operation, the area under and in front
of the cabinet must not be obstructed in any way.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.)
7.4 (210 cu l)
1/6 Size Pans (4” deep)
12
Width, Overall (in.)
27 1/2 (699 mm)
Depth, Overall (in.) (incl. bumpers)
35 (890 mm)
Depth, Cutting Board (in.)
8 (203 mm)
27 1/2”
(699 mm)
HOOD
Height, Overall (in.) (incl. 3 3/4” casters) 41 (1041 mm)
No. of Drawers (two tier)
2
REFRIGERANT DATA
Condensing Unit Size (H.P.)
1/5
Capacity (BTU/Hr)*
1625
ELECTRICAL DATA
Voltage (int’l)
115/60/1 (220/50/1)
Total Amps (int’l)
2.46 (1.85)
10 ft. Cord/Plug [attached] (int’l)
Yes (No)
SHIPPING DATA
FRONT VIEW
Weight (lbs.)
188 (85 kg)
Height - Crated (in.)
43 1/4 (1099 mm)
Width - Crated (in.)
35 1/2 (902 mm)
Depth - Crated (in.)
37 1/4 (946 mm)
35”
(890 mm)
34”
(864 mm)
DRAWER PAN CONFIGURATIONS
1”
(25 mm)
15 5/8”
(397 mm)
Two Tier: (1) 12 x 20 x 6 pan per drawer
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
41”
30 1/4” (1041 mm)
(768 mm)
3 3/4” (95 mm)
Equipped with one NEMA-5-15P Plug
(varies by country)
27 1/2”
(699 mm)
SIDE VIEW
05/27/10
27 1/2”
(699 mm)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
34”
(864 mm)
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
8”
(203 mm)
®
MADE IN THE U.S.A.
© Copyright 2019. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
PAN TOP CONFIGURATION
D27N12M-FB-D (1/14/20)