Continental Refrigerator D48N8C-FB Spec Sheet

DESIGNER LINE SANDWICH UNIT Model:

D48N8C-FB

Natural Refrigerant R-290 Model 48” Cutting Top Sandwich Unit Refrigerator with Solid Door - 8 Pans Front Breathing

Stainless steel front, top and end panels and interior.

Project Name: Model Specified: Location: Item No: Quantity: AIA #: SIS #:

Standard Model Features Options and Accessories

(upcharge and lead times may apply) Stainless steel back Overshelves (single or double) Add’l epoxy-coated steel shelves Stainless steel shelves Door locks Automatic, electric condensate evaporator Rear-mounted cutting board Composite cutting board Flat insulated night cover Vision panel lid Modified pan openings

Consult factory for other model configurations, options and accessories.

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579 539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com REFRIGERATION SYSTEM

Performance-rated refrigeration system Natural, environmentally-safe, high-efficiency R-290 refrigerant 1 Unique air flow distribution allows pan product to maintain 33° - 41°F Automatic, hot gas condensate evaporator Non-corrosive, plasticized fin evaporator coil Easily serviceable, back mounted compressor Expansion valve system

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation Smooth, polished chrome door handles Spring loaded, self closing doors Magnetic snap-in door gaskets Heavy-duty, epoxy-coated steel shelves 19” deep, full length nylon cutting board Insulated lid Completely enclosed, vented and removable case back 3 3/4” casters

MODEL FEATURES

(8) 1/6 size recessed pans, 4” deep Removable interior tub below pans Electronic controller w/digital display & hi-low alarm Field rehingeable doors 1 R-290 refrigerant meets all federal and state regulatory requirements.

Front breathers are a unique, field assembled, bottom mounted ventilation system designed to allow cabinets to be flush against a wall or built into a counter to conserve space. For proper operation, the area under and in front of the cabinet must not be obstructed in any way.

APPROVAL:

Model Specifications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 1/6 Size Pans (4” deep) Width, Overall (in.) Depth, Overall (in.) (incl. cutting board & bumpers) Depth, Cutting Board (in.) Height, Overall (in.) (incl. 3 3/4” casters) Shelf Area (sq. ft.) No. of Shelves No. of Doors Interior Depth (in.) Interior Height (in.) Interior Width (in.) 13.4 (379 cu l) 8 48 (1219 mm) 38 1/4 (972 mm) 19 (483 mm) 41 (1041 mm) 6.8 (.6 sq m) 2 2 See Drawing 26 1/4 (667 mm) 44 (1118 mm)

REFRIGERANT DATA

Condensing Unit Size (H.P.) Capacity (BTU/Hr)*

ELECTRICAL DATA

Voltage (int’l) Total Amps (int’l) 10 ft. Cord/Plug [attached] (int’l) 1/4+ 1940 115/60/1 (220/50/1) 4.5 (3.6) Yes (No)

SHIPPING DATA

Weight (lbs.) Height - Crated (in.) Width - Crated (in.) Depth - Crated (in.) 267 (121 kg) 43 1/4 (1099 mm) 56 (1422 mm) 37 1/4 (946 mm)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.

FRONT VIEW 19 5/8” (498 mm) DOOR OPENING

Model Plan Views

HOOD 48” (1219 mm) 38 1/4” (972 mm) 34” (864 mm) 10 11/16” (271 mm) 1” (25 mm) 23 5/8” (600 mm) DOOR OPENING Equipped with one NEMA-5-15P Plug (varies by country) 05/27/10

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579 539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative products, specifications subject to change without notice. SIDE VIEW 34” (864 mm) 19 5/8” (498 mm) 14 7/8” (378 mm) 10 1/4” (260 mm) 30 1/4” (768 mm) 41” (1041 mm) 3 3/4” (95 mm) 27 1/2” (699 mm) 48” (1219 mm) 16 15/16” (430 mm) 18 7/8” (479 mm) ® MADE IN THE U.S.A.

© Copyright 2019. Continental Refrigerator. A Division of National Refrigeration & Air Conditioning Products, Inc. PAN TOP CONFIGURATION 3 3/16” (81 mm) D48N8C-FB (6/15/19)