advertisement
DESIGNER LINE REFRIGERATOR
Model:
DL2RES-HD
2-Section Extra-Wide Reach-In
Shallow Depth with Half Doors
DL2RES-HD - Stainless steel front, aluminum end panels and interior
DL2RES-SA-HD - Stainless steel exterior, aluminum interior
DL2RES-SS-HD - Stainless steel exterior and interior
Project Name:
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back
Additional epoxy-coated steel shelves
Chrome or stainless steel shelves
Rehinging of doors (consult factory)
Pass-Thru
Standard depth
Hinged glass doors
Increased refrigeration systems
Expansion valve system
Wine display
Casters
Dial thermometer
Remote models
Custom laminates
Full doors
Special electrical req. (consult factory)
Correctional Facility Options
• One way security screws
• Locking hasp (lock not included)
• Stainless steel mesh cover
• Coverless hinges
Consult factory for other model configurations, options and accessories.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020 www.continentalrefrigerator.com
REFRIGERATION SYSTEM
Environmentally-safe R-134a refrigerant
Self contained, performance-rated “plug” refrigeration system
Refrigeration system is readily accessible on top of cabinet, separate from the “food zone” to increase storage capacity
Automatic, hot gas condensate evaporator
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Self-closing doors
Magnetic snap-in door gaskets
Cylinder lock in door
Heavy-duty, epoxy-coated steel shelves
Adjustable 6” stainless steel legs
MODEL FEATURES
Automatic interior lighting
External digital thermometer
Energy saving switch for door heaters
Unique air duct system for optimum air flow
Cabinet upper side panels and refrigeration “plug” system can be easily removed and reinstalled at job site
APPROVAL:
Model Specifications Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.)
Width, Overall (in.)
Depth, Overall (incl. handles) (in.)
Depth [less doors] (in.)
Depth [doors open 90°] (in.)
Clear Door Width (in.)
Clear Half Door Height (in.)
Height, Overall (incl. 6” legs) (in.)
32 (906 cu l)
57 (1448 mm)
29 1/4 (743 mm)
25 7/8 (657 mm)
51 1/8 (1299 mm)
21 7/8 (556 mm)
27 1/2 (699 mm)
83 1/4 (2115 mm)
4
6
40.8 (3.8 sq m)
No. of Doors
No. of Shelves
Shelf Area (sq. ft.)
REFRIGERANT DATA
Condensing Unit Size (H.P.)
Capacity (BTU/Hr)*
ELECTRICAL DATA
Voltage (int’l)
Feed Wires (incl. ground)
Total Amps (int’l)
10 ft. Cord/Plug [attached] (int’l)
SHIPPING DATA
Height - Crated (in.)
Width - Crated (in.)
Depth - Crated (in.)
1/3
2560
115/60/1 (220/50/1)
3
6.5 (4.9)
Yes (No)
85 1/2 (2172 mm)
64 (1626 mm)
42 (1067 mm)
Volume - Crated (cu. ft.)
Weight Std - Crated (lbs.)
Weight SS - Crated (lbs.)
Weight Std - Uncrated (lbs.)
Weight SS - Uncrated (lbs.)
133 (3766 cu l)
575 (261 kg)
655 (297 kg)
405 (184 kg)
485 (220 kg)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.
FRONT VIEW
77 1/4”
(1962 mm)
83 1/4”
(2115 mm)
6”
(152 mm)
57”
(1448 mm)
29 1/4”
(743 mm)
25 7/8”
(657 mm)
22 7/8”
(581 mm)
58 1/8”
(1476 mm)
21 7/8”
(556 mm)
DOOR OPENING
27 1/2”
(699 mm)
DOOR OPENING
Equipped with one NEMA-5-15P Plug
(varies by country)
05/27/10
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020 www.continentalrefrigerator.com
Due to our continued efforts in developing innovative products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically sealed, capillary-type refrigeration system is installed on the top of each refrigerator. Plasticized fin coil and air circulation fans are contained within a concealed “plug”-type insulated housing, readily accessible on top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with environmentally safe R-134a refrigerant and mounted on a sturdy steel, rail-type base which can be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38°F-40°F
(3°-5° Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100°F. All condensate water is evaporated by an automatic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are factory performance- tested for a minimum of 16 hours prior to crating.
INSULATION
All cabinet walls, top and bottom have high density, foamed-in-place, non-CFC polyurethane insulation.
SHELVING
Shelves are designed for heavy-duty use with .306” diameter frame and brace members and .140” diameter fill wires spaced 3/4” apart. Shelves are welded steel and epoxy-coated for a durable, long, rust-free service life. Adjustments are in 1 inch increments and a wide door opening allows the use of a variety of optional pan and tray slide types.
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor-tight. Case is of all metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with raw edges. Cabinet body is insulated with non-CFC, foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the condensing unit. Easily removable, low-wattage, anti-sweat door heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker strip eliminate condensate build-up on the cabinet front. Automatic interior lighting is activated by an easily accessible interior switch. Cabinets are equipped with 6 inch adjustable stainless steel legs.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavygauge stainless steel and are internally braced and urethane-foam-insulated for rigidity. Door corners are welded construction and polished. Replaceable snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed alike. Hinges are cam action, lift-off type featuring positive safety stop at 120 degrees.
DL2RES-HD (8/27/13)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project