Epson WorkForce WF-2860 Installation Guide

Epson WorkForce WF-2860 Installation Guide
WF-2860
Start Here
2
1
Turn on and configure
4
Remove only the yellow tape from each ink cartridge.
2
queeze the tab on the right edge guide and slide the
S
side edge guides all the way out.
3
Insert paper with the glossy or printable side down.
4
lide the edge guides against the paper, but not too
S
tightly.
5
Keep the cassette flat as you insert it all the way.
6
Pull out the output tray.
7
ollow the instructions on the LCD screen to adjust the
F
print quality and to select your paper settings.
onnect the power cord to the back of the product and to
C
an electrical outlet.
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de configuración en español, consulte la Guía
de instalación en www.epson.com/support/wf2860sp (requiere una
conexión a Internet).
1
Unpack
Note: Do not open the ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Caution: Do not remove any other labels or seals, or ink will leak.
Do not touch the green chip on the cartridge.
5
Insert the cartridge in the holder for each color. Press each
cartridge down until it clicks. Make sure all cartridges are
pushed down into place.
6
ower the scanner unit, then select Installed to start
L
charging the ink delivery system.
Caution: Do not connect to your computer yet.
2
3
Raise the control panel and turn on the product.
Select your language, country, and time.
Note: You can change these settings later using the product’s
control panel. For more information, see the online User’s Guide.
Remove all protective materials from the product.
3 Install ink cartridges
Caution: Keep the ink cartridges out the reach of children and do not
drink the ink.
1
2
Lift up the scanner unit until it locks into place.
7
ift up the scanner unit and remove all protective
L
materials from inside the product.
he printer starts charging the ink. Ink charging takes
T
approximately 5 minutes. When you see a completion
message on the printer’s LCD screen, charging is
complete.
Caution: Don’t turn off the printer or raise the scanner unit while
the printer is charging or you’ll waste ink.
Note:
• The printer is designed for use with Epson® cartridges only, not
third-party cartridges or ink.
• T
he cartridges included with the printer are designed for
printer setup and not for resale. After some ink is used for
charging, the rest is available for printing.
2
ently shake the black ink cartridge. Do not shake the
G
other ink cartridges.
4 Load paper
Caution: Do not touch the flat white cable.
3
Lower the scanner unit.
1
3
Unpack the ink cartridges.
ake sure the product is done charging the ink, and then
M
pull out the paper cassette.
For instructions on loading envelopes or legal-size paper, see
the online User’s Guide.
WF-2860
Start Here
2
1
Turn on and configure
4
Remove only the yellow tape from each ink cartridge.
2
queeze the tab on the right edge guide and slide the
S
side edge guides all the way out.
3
Insert paper with the glossy or printable side down.
4
lide the edge guides against the paper, but not too
S
tightly.
5
Keep the cassette flat as you insert it all the way.
6
Pull out the output tray.
7
ollow the instructions on the LCD screen to adjust the
F
print quality and to select your paper settings.
onnect the power cord to the back of the product and to
C
an electrical outlet.
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de configuración en español, consulte la Guía
de instalación en www.epson.com/support/wf2860sp (requiere una
conexión a Internet).
1
Unpack
Note: Do not open the ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Caution: Do not remove any other labels or seals, or ink will leak.
Do not touch the green chip on the cartridge.
5
Insert the cartridge in the holder for each color. Press each
cartridge down until it clicks. Make sure all cartridges are
pushed down into place.
6
ower the scanner unit, then select Installed to start
L
charging the ink delivery system.
Caution: Do not connect to your computer yet.
2
3
Raise the control panel and turn on the product.
Select your language, country, and time.
Note: You can change these settings later using the product’s
control panel. For more information, see the online User’s Guide.
Remove all protective materials from the product.
3 Install ink cartridges
Caution: Keep the ink cartridges out the reach of children and do not
drink the ink.
1
2
Lift up the scanner unit until it locks into place.
7
ift up the scanner unit and remove all protective
L
materials from inside the product.
he printer starts charging the ink. Ink charging takes
T
approximately 5 minutes. When you see a completion
message on the printer’s LCD screen, charging is
complete.
Caution: Don’t turn off the printer or raise the scanner unit while
the printer is charging or you’ll waste ink.
Note:
• The printer is designed for use with Epson® cartridges only, not
third-party cartridges or ink.
• T
he cartridges included with the printer are designed for
printer setup and not for resale. After some ink is used for
charging, the rest is available for printing.
2
ently shake the black ink cartridge. Do not shake the
G
other ink cartridges.
4 Load paper
Caution: Do not touch the flat white cable.
3
Lower the scanner unit.
1
3
Unpack the ink cartridges.
ake sure the product is done charging the ink, and then
M
pull out the paper cassette.
For instructions on loading envelopes or legal-size paper, see
the online User’s Guide.
5 Connect the fax line
1
onnect a phone cord to a telephone wall jack and to the
C
LINE port on your product. See the online User’s Guide
for more information.
Mobile printing
Connect wirelessly from your smartphone, tablet, or computer.
Print documents and photos from across the room or around
the world:
Quick Guide
• Print directly from your iOS device. Simply connect your
printer and device to the same network and tap the action
icon to select the print option.
User’s Guide
• Use Epson Print Enabler (free from Google Play™) with
Android™ devices (v4.4 or later). Then connect your printer
and device to the same network and tap the menu icon to
select the print option.
• Print remotely with Epson Connect™ and Google Cloud
Print™. See your online User’s Guide for instructions or
learn more at www.epson.com/connect (U.S.) or
www.epson.ca/connect (Canada).
2
If prompted, press Proceed to set up the fax, or press
Set up later to set it up later.
6 Install software
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
Note: If you are using a Mac or your computer does not have a
CD/DVD drive, an Internet connection is required to obtain the
product software.
• Restart your router (turn it off and then on), then try to
connect to it again.
To print from a Chromebook™, go to www.epson.com/support/gcp
(U.S.) or www.epson.ca/support/gcp (Canada) for instructions.
• The printer can only connect to a network that supports
2.4 GHz connections. If your router offers both 2.4 GHz and
5 GHz connections, make sure 2.4 GHz is enabled.
1
ake sure the product is NOT CONNECTED to your
M
computer.
The product’s screen is dark.
2
Insert the product CD (Windows only) or download and
run your product’s software package. For the latest
software, visit:
www.epson.com/support/wf2860 (U.S.)
www.epson.ca/support/wf2860 (Canada)
3
ollow the instructions on the computer screen to run the
F
setup program.
4
hen you see the Select Your Connection screen, select
W
one of the following and follow the on-screen instructions:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have a USB cable (not included).
• Wired network connection
Make sure you have an Ethernet cable (not included).
Basic information and troubleshooting.
Windows: Click the icon on your desktop or Apps screen to
access the online User’s Guide.
Mac: Click the icon in Applications/Epson Software/Guide to
access the online User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website,
as described below.
Support
Visit www.epson.com/support (U.S.) or
www.epson.ca/support (Canada) and search for your product
to download drivers, view manuals, get FAQs, or contact
Epson.
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to
8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm,
Pacific Time, Saturday. Days and hours of support are subject
to change without notice. Toll or long distance charges may
apply.
Recycling
Epson offers a recycling program for end of life hardware and
ink cartridges. Please go to www.epson.com/recycle (U.S.)
or www.epson.ca/recycle (Canada) for information on how to
return your products for proper disposal.
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Be sure to enter your password in the correct
case.
Windows®: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable.
Any questions?
Make sure your product is turned on, and press any button to
wake it from sleep mode.
Setup is unable to find my printer after connecting it
with a USB cable.
Need paper and ink?
nsure peak performance and brilliant results
E
with Genuine Epson Ink and specialty papers,
engineered specifically for Epson printers. Find
Genuine Epson Ink and specialty papers at
www.epson.com (U.S. sales) or
www.epson.ca (Canadian sales) and at
Epson authorized resellers. Call 800-GO-EPSON
(800-463-7766).
Make sure your product is turned on and securely connected
as shown:
WF-2860 replacement ink cartridges
Color
Standard-capacity
High-capacity
Black
202
202XL
Cyan
202
202XL
Magenta
202
202XL
Yellow
202
202XL
EPSON and Claria are registered trademarks, Epson Connect is a trademark, and EPSON
Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
Designed for Excellence is a trademark of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Google Cloud Print, Chromebook, and Google Play are trademarks of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may
be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2017 Epson America, Inc., 11/17
Printed in XXXXXX
CPD-54976
5 Connect the fax line
1
Connect a phone cord to a telephone wall jack and to the
LINE port on your product. See the online User’s Guide
for more information.
Mobile printing
Connect wirelessly from your smartphone, tablet, or computer.
Print documents and photos from across the room or around
the world:
Quick Guide
• Print directly from your iOS device. Simply connect your
printer and device to the same network and tap the action
icon to select the print option.
User’s Guide
• Use Epson Print Enabler (free from Google Play™) with
Android™ devices (v4.4 or later). Then connect your printer
and device to the same network and tap the menu icon to
select the print option.
• Print remotely with Epson Connect™ and Google Cloud
Print™. See your online User’s Guide for instructions or
learn more at www.epson.com/connect (U.S.) or
www.epson.ca/connect (Canada).
2
If prompted, press Proceed to set up the fax, or press
Set up later to set it up later.
6 Install software
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
Note: If you are using a Mac or your computer does not have a
CD/DVD drive, an Internet connection is required to obtain the
product software.
• Restart your router (turn it off and then on), then try to
connect to it again.
To print from a Chromebook™, go to www.epson.com/support/gcp
(U.S.) or www.epson.ca/support/gcp (Canada) for instructions.
• The printer can only connect to a network that supports
2.4 GHz connections. If your router offers both 2.4 GHz and
5 GHz connections, make sure 2.4 GHz is enabled.
1
Make sure the product is NOT CONNECTED to your
computer.
The product’s screen is dark.
2
Insert the product CD (Windows only) or download and
run your product’s software package. For the latest
software, visit:
www.epson.com/support/wf2860 (U.S.)
www.epson.ca/support/wf2860 (Canada)
3
Follow the instructions on the computer screen to run the
setup program.
4
When you see the Select Your Connection screen, select
one of the following and follow the on-screen instructions:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have a USB cable (not included).
• Wired network connection
Make sure you have an Ethernet cable (not included).
Basic information and troubleshooting.
Windows: Click the icon on your desktop or Apps screen to
access the online User’s Guide.
Mac: Click the icon in Applications/Epson Software/Guide to
access the online User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website,
as described below.
Support
Visit www.epson.com/support (U.S.) or
www.epson.ca/support (Canada) and search for your product
to download drivers, view manuals, get FAQs, or contact
Epson.
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to
8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm,
Pacific Time, Saturday. Days and hours of support are subject
to change without notice. Toll or long distance charges may
apply.
Recycling
Epson offers a recycling program for end of life hardware and
ink cartridges. Please go to www.epson.com/recycle (U.S.)
or www.epson.ca/recycle (Canada) for information on how to
return your products for proper disposal.
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Be sure to enter your password in the correct
case.
Windows®: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable.
Any questions?
Make sure your product is turned on, and press any button to
wake it from sleep mode.
Setup is unable to find my printer after connecting it
with a USB cable.
Need paper and ink?
nsure peak performance and brilliant results
E
with Genuine Epson Ink and specialty papers,
engineered specifically for Epson printers. Find
Genuine Epson Ink and specialty papers at
www.epson.com (U.S. sales) or
www.epson.ca (Canadian sales) and at
Epson authorized resellers. Call 800-GO-EPSON
(800-463-7766).
Make sure your product is turned on and securely connected
as shown:
WF-2860 replacement ink cartridges
Color
Standard-capacity
High-capacity
Black
202
202XL
Cyan
202
202XL
Magenta
202
202XL
Yellow
202
202XL
EPSON and Claria are registered trademarks, Epson Connect is a trademark, and EPSON
Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement