Epson Stylus Photo 1200 User Manual

Epson Stylus Photo 1200 User Manual

1440updt.fm Page 1 Friday, March 24, 2000 10:56 AM Important Information for Windows

AXIS

®

1440 Print Server For EPSON

®

Printers: Product Update Important Information for Windows

If you are using Windows ® 95, Windows 98, or Windows NT ® 4.0, you need to turn off your EPSON ® printer software’s monitoring utility (Status Monitor) before you use the printer. The EPSON Status Monitor was created for printing locally and cannot monitor your printer over a network. If you don’t turn off monitoring, you will see error messages when you try to print. If you are using the AXIS ® 1440 Print Server with the EPSON Stylus ® COLOR 760, EPSON Stylus COLOR 860, EPSON Stylus COLOR 1160, EPSON Stylus Photo 870, or EPSON

Stylus Photo 1270, follow the steps under, “Disabling Monitoring for EPSON Status Monitor 3” (page 2). For all other printers, follow the steps in the section below.

Note:

❏ AXIS includes software for monitoring the printer over the network. For details, see your

AXIS 1440 Print Server User’s Manual

.

When you are installing drivers for the EPSON Stylus Photo 870 or the EPSON Stylus Photo 1270, the Printer Utility tries to automatically detect your printer port. You may see the following screen: If you see this screen, click

Cancel

and configure your port for the AXIS 1440 manually, as described in the

AXIS 1440 Print Server Installation Guide

.

AXIS 1440 Product Update 1

1440updt.fm Page 2 Friday, March 24, 2000 10:56 AM Important Information for Windows

Disabling Monitoring for EPSON Status Monitor 2

Follow the steps below to disable monitoring on any Windows 95, Windows 98, or Windows NT 4.0 systems that will use one of the following printers: EPSON Stylus COLOR 740, EPSON Stylus COLOR 740i, EPSON Stylus COLOR 850, EPSON Stylus Photo 700, EPSON Stylus Photo 750, EPSON Stylus Photo 1200, EPSON Stylus Photo EX.

1. Click

Start

, point to

Programs

,

EPSON

, then click

EPSON Status Monitor 2

.

2. In the Settings menu, select

Background Monitoring

, then click

Stop monitoring now

. (If you can’t click Stop monitoring now, monitoring is already disabled.) Then close the EPSON Status Monitor 2 Window.

Disabling Monitoring for EPSON Status Monitor 3

Follow the steps below to disable monitoring on any Windows 95, Windows 98, or Windows NT 4.0 systems that will use one of the following printers: EPSON Stylus COLOR 760, EPSON Stylus COLOR 860, EPSON Stylus COLOR 1160, EPSON Stylus Photo 870, EPSON Stylus Photo 1270.

1. Open the Printers control panel. Click

Start

, point to

Settings

, then click

Printers

. 2. In Windows 95 or Windows 98, right-click the icon for your printer and click

Properties

.

In Windows NT 4.0, right-click the icon for your printer and click

Document Defaults

.

3. Click the Utility tab and click the

Speed & Progress

button.

2 AXIS 1440 Product Update

1440updt.fm Page 3 Friday, March 24, 2000 10:56 AM Important Information for Macintosh 4. In the Speed & Progress window, click the

Monitoring Preferences

button. You see the Monitoring Preferences window.

Uncheck all events 5. Uncheck any selected events in the Select Notification box.

Important Information for Macintosh

You cannot accurately monitor ink levels when using the AXIS 1440 Print Server on your Macintosh network. If you see the ink levels in EPSON Status Monitor, keep in mind that the display is not accurate. AXIS 1440 Product Update 3

1440updt.fm Page 4 Friday, March 24, 2000 10:56 AM Supported Printers

Supported Printers

The AXIS 1440 Print Server supports the following printers: EPSON Stylus COLOR 740 EPSON Stylus COLOR 740i EPSON Stylus COLOR 760 EPSON Stylus COLOR 850 EPSON Stylus COLOR 860 EPSON Stylus COLOR 1160 EPSON Stylus Photo 700 EPSON Stylus Photo 750 EPSON Stylus Photo 870 EPSON Stylus Photo 1200 EPSON Stylus Photo 1270 EPSON Stylus Photo EX Some of the supported printers have network drivers on the included EPSON Drivers for AXIS 1440 Print Server CD-ROM. For drivers not shown below (Windows 95, Windows 98, Windows NT, and Macintosh ® AppleTalk ® ), use the drivers included with your printer. The table below lists drivers that are included on the AXIS 1440 Print Server CD-ROM. (Follow the steps in the sections below to install printer drivers from the CD-ROM.)

Printer

EPSON Stylus COLOR 740 EPSON Stylus COLOR 740i EPSON Stylus COLOR 760 EPSON Stylus COLOR 860 EPSON Stylus COLOR 1160 EPSON Stylus Photo 700 EPSON Stylus Photo 750 EPSON Stylus Photo 1200 EPSON Stylus Photo EX

Operating System

Macintosh Macintosh Windows 95, Windows 98 Windows 95, Windows 98 Windows 95, Windows 98 Macintosh Macintosh Macintosh Macintosh 4 AXIS 1440 Product Update

1440updt.fm Page 5 Friday, March 24, 2000 10:56 AM Installing Printer Drivers

Installing Printer Drivers

Follow the steps in the appropriate section to install your printer driver from the EPSON Drivers for AXIS 1440 Print Server CD-ROM. If you need to install drivers that are not listed in the table above, see the documentation that came with your printer for instructions.

Windows 95/Windows 98

Close any open applications, then follow these steps to install your driver: 1. Insert the EPSON Drivers for AXIS 1440 Print Server CD-ROM in your drive. You see the EPSON Installation Program screen. If the screen does not appear, double-click

My Computer

and then double-click the

Epson

CD-ROM icon to start the EPSON Installation Program. 2. Highlight the driver for your printer and click the right arrow button 3. Click

OK

to install your printer software.

.

4. Click

OK

when the software has finished installing. Then restart your computer.

After you complete the installation, see “Disabling Monitoring for EPSON Status Monitor 3” (page 2) to disable the printer software’s local printer monitoring.

Note:

AXIS includes software for monitoring the printer over the network. See your

AXIS 1440 Print Server User’s Manual

for details.

Macintosh

Close any open applications, then follow these steps to install your driver: 1. Insert the EPSON Drivers for AXIS 1440 Print Server CD-ROM in your drive. The window opens and you see icons for the available printers. (If it doesn’t open automatically, double-click the CD-ROM icon.) 2. Double-click the installer icon for your printer. (Use the EPSON Stylus COLOR 740 Installer icon for the EPSON Stylus COLOR 740i printer.) 3. Read the message and click

Continue

.

4. Click

Install

. Then read the message and click

Continue

. The driver is installed on your Macintosh.

AXIS 1440 Product Update 5

1440updt.fm Page 6 Friday, March 24, 2000 10:56 AM Installing Printer Drivers 5. Select a paper size and click

OK

.

6. Click

Restart

to restart your Macintosh.

Note:

You cannot accurately monitor ink levels when using the AXIS 1440 Print Server on your Macintosh network. 6 AXIS 1440 Product Update Part No. 17436 Copyright © Axis Communications AB, 2000 Revison 1.1

Dated: March 2000 AXIS 1440 Product Update

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement