Extron SMB 303 Template

Extron SMB 303 Template
SMB 303
Direct Furniture Mounting
and
Cutout Template
4.62 inches (117.5 mm)
2.31 inches (58.7 mm)
Print this
template
at 100% on
11” x 8.5” paper
Cable Access
Cutout (Optional)
Diameter = 1 inch (min.)
Drill 1/16 inch (1.6 mm)
Pilot Holes (x4)
1.50 inches
(38.1 mm)
1.90 inches
(48.2 mm)
Outer Edge
(Do not cut this line)
1.
2.
3.
4.
5.
6.
Confirm product to be installed.
After printing, measure the cutout template
and pilot hole locations to verify accurate dimensions.
Fix cutout template to mounting location.
Mark pilot holes and cutout center location.
Drill pilot holes.
If required, cut the cable access opening with a hole saw.
68-1945-01
Rev. A
12 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement