Important Note: Print 1:1 only.
Do not scale.
7.6" (193 mm) cutout diameter Cutout Template Instructions
1. Mark the location where the speaker will be centered and installed.
2. Align the center hole of the template with the mark.
3. Trace a circle around the cutout template.
4. Cut out the traced circle.
68-2845-50 Rev. A 09 15 Red solid lines are die cut.
Template Material Thickness = 0.015” (0.38 mm) Black Ink Finished size = 7.6” (193 mm) ceiling cutout diameter Center hole = 0.375” (9.5 mm) diameter
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project