Extron SF 26X User manual

Extron SF 26X User manual

SF 26X Cutout Template

Important Note: Print 1:1 only.

Do not scale.

7.6" (194 mm) cutout diameter 1.



Mark the location where the speaker will be centered and installed.

Align the center hole of the template with the mark.

Trace a circle around the cutout template.


Cut out the traced circle.

68-2499-01 Rev. A 08 13 Red solid lines are die cut.

Template Material Thickness = 0.015” (0.38 mm) Black Ink Finished size = 7.6” (194 mm) ceiling cutout diameter Center hole = 0.375” (9.5 mm) diameter

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF