Extron Cable Cubby 500 Template

Extron Cable Cubby 500 Template

Cut-Out Template for the Extron

Cable Cubby 500 CCB

5 3 / 4 " (146 mm)

Table Clamp

2"

7 1 / 8 " (181 mm)

SURFACE CUT-OUT AREA

1 / 16 ” (1.5 mm)

User Access

1 / 4 " (6 mm) R

Trim Ring’s Outer Edge (Do not cut this line.)

Page Size: 11" x 17" Print Scale 1:1 Do not Shrink

1. Confirm the product to be installed.

2. Before printing, double check print settings and make sure the page is not scaled.

3. Remove the surface cut-out area (gray) from the template.

4. Measure the cutout and template.

5. Mark the position on the furniture where the Cable Cubby 500 CCB will be installed.

6. Double check dimensions and position, then cut the opening.

P/N 68-2860-01 Rev. B

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement