Extron Cable Cubby 650 UT Template

Extron Cable Cubby 650 UT Template
Cut-Out Template for the Extron
Cable Cubby 650 UT
(for double set-up)
Page size: 11" x 17"
Print scale 1:1
Do not shrink.
1. Confirm the product to be installed.
2. Remove the surface cut-out area
(gray) from the template.
3. Measure the cutout and template.
4. Mark the position on the
furniture where the Cable Cubby 650 UT
will be installed.
5. Double check dimensions and position,
then cut the opening.
Cut-Out Template for the Extron
Cable Cubby 650 UT
(for double set-up)
Cut outer edge
when marking holes
under furniture.
12"
(305 mm)
10"
(254 mm)
6.5"
(165 mm)
4 1/4"
(108 mm)
SURFACE
CUT-OUT
AREA
+ 1/16” (1.5 mm)
-
Keystone Mounting Holes (4)
Mounting Holes (12)
P/N 68-3085-02 Rev. A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement