Citizen CB5886-58H Eco-Drive User manual

Citizen CB5886-58H Eco-Drive User manual
INSTRUCTION MANUAL
ENGLISH
China
Japan
ESPAÑOL
EN
ITALIANO
FR
FRANÇAIS
DEUTSCH
PORTUGUÊS
ES
中文(繁体字)
中文(简体字)
DE
IT
PO
BPC
JJY
Europe
North America
DCF77
WWVB
Time signals available to this watch are as
shown on the table.
Les signaux d’heure disponibles sur cette
montre sont indiqués dans le tableau.
Las señales horarias disponibles para este reloj
aparecen en la tabla.
Die für diese Armbanduhr verfügbaren
Zeitsignale sind in der Tabelle aufgeführt.
Nella tabella vengono raffigurati i segnali orari
disponibili per questo orologio.
Os sinais horários disponíveis para este relógio
são os exibidos na tabela.
CT 本款手錶的可用時間訊號如表格所示。
CS 本款手表的可用时间信号如表格所示。
Thank you for your purchase of this Citizen watch.
Before using the watch, read this instruction manual carefully to ensure
correct use.
After reading the manual, store it in a safe place for future reference.
Be sure to visit the Citizen website at http://www.citizenwatch-global.com/ .
Here you will find a variety of information such as electronic setting guides,
answers to frequently asked questions, Eco-Drive recharging information and
more.
To check the movement number
Engraving position example
A case number—4 alphanumeric characters and 6 or
more alphanumeric characters—is engraved on the
case back. (Figure on the right)
The first 4 characters of the case number represent
the movement number of the watch. In the example The engraving position may
on the right, “
” is the movement number. differ depending on watch
model.
1
Safety precautions — IMPORTANT
This manual contains instructions that should be strictly followed at all times
not only for optimal use, but to prevent any injuries to yourself, other persons or
property. We encourage you to read the entire booklet (especially, pages 70 to 83)
and understand the meaning of the following symbols:
■ Safety advisories are categorized and depicted in this manual as follows:
2
DANGER
Highly likely to cause death or serious injury
WARNING
Can cause serious injury or death
CAUTION
Can or will cause minor or moderate injury or damage
Safety precautions
■ Important instructions are categorized and depicted in this manual as follows:
(Following symbols are examples of Pictograms.)
Warning (caution) symbol followed by prohibited matters.
Warning (caution) symbol followed by instructions that should be
followed or precautions that should be observed.
3
Features
Radio controlled watch
■■
Receives time signals from one of the
five signal stations in four regions in
the world and automatically adjusts the
time and calendar.
12
9
3
■■
Alarm
■■
Chronograph
6
4
Sounds at the time set.
Measures up to 60 minutes
by 1 second.
■■
■■
World time
■■
Eco-Drive
Easy to see the time
for a second time zone,
anywhere in the world.
No periodical battery
replacement is needed.
This watch is fueled by
light.
Perpetual calendar
No need for monthly and
leap-year date correction
until February 28, 2100.
* "Eco-Drive" is an original technology of Citizen.
CONTENTS
Before using this watch. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Band adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Protective stickers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
How to use a specially designed crown/button. . . . . . . . . . . 10
Component identification. . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Checking the power reserve . . . . . . . . . . . . . . . . . . . . . . . 16
Checking the previous signal reception result . . . . . . . . 20
Checking the current world time setting . . . . . . . . . . . . 22
Setting the world time . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Continued on the next page ➡
5
CONTENTS
Receiving the signal manually
(on-demand reception). . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting summer time (DST) . . . . . . . . . . . . . . . . . . . . . . . 32
Using the chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Charging your watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
About signal reception . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
When receiving the time signal. . . . . . . . . . . . . . . . . . . . . . . . . . 50
Note on the time signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Poor reception areas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
6
Adjusting the time and calendar manually . . . . . . . . . . 56
CONTENTS
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Checking and correcting the reference position. . . . . . . . . . 60
Symptom and Remedies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Eco-Drive watch handling precautions . . . . . . . . . . . . . . 70
Water resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Precautionary items and usage limitations . . . . . . . . . . 77
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
7
Before using this watch
This watch has a rechargeable cell which is charged by exposing
the dial to light.
Expose the dial to direct sunlight regularly to charge the watch.
For details of charging, see page 44 -.
After unpacking, follow the steps below when starting time and calendar
adjustment.
1 Checking the current power reserve (page 16 )
2 Changing the world time setting (page 24 )
3 Receiving the time signal (page 29 )
8
Before using this watch
Band adjustment
We recommend seeking the assistance of an experienced watch technician
for sizing of your watch. If adjustment is not done correctly, the bracelet may
unexpectedly become detached leading to loss of your watch or injury.
Consult an authorized service center.
Protective stickers
Be sure to remove any protective stickers that may be on your watch (case back,
band, clasp, etc.). Otherwise, perspiration or moisture may enter the gaps between
the protective stickers and the parts, which may result in a skin rash and/or
corrosion of the metal parts.
Continued on the next page ➡
9
Before using this watch
How to use a specially designed crown/button
Some models are equipped with a specially designed crown and/or push button to
prevent accidental operation.
Screw down crown/button
Unlock the crown/button prior to operate your watch.
Unlock
10
Lock
Screw down
crown
Rotate the crown
counterclockwise
until it releases from
the case.
Push the crown in to the
case. With gentle pressure
towards the case, rotate
the crown clockwise to
secure it to the case. Be
sure to tighten firmly.
Screw down
push button
Rotate the
locking screw
counterclockwise,
and loosen until it
stops.
Rotate the locking screw
clockwise, and tighten
firmly.
Before using this watch
Recessed button
Press the button with a non-marring narrow-tipped object.
• Metal objects may cause marring or scratching of
the button.
11
Component identification
Hands and buttons
55
50
RIO
F
10
10
KHI
S
DAC
BKK
AL
M
BJ
S
CHR
Minute hand
Crown
12
12
TY
O
AL
M
D
SY
16
16
24
19 20 21
17 18
22
25
23
24
25
NOU
15
AKL
14
MDY
14
TME
13
OF
F
13
T
SE
HN
L
11
11
CHR
7
ALM
15
40
MA
O
90
B
DX
NAUT. 35 STAT.
30
CHI NYC
40
Button B
90
60
S M
T
SE
19 20 21
17 18
22
30
80
O
TME
ON
C
AN
23
12
PAR 70 K
AT
H
ON SMT OFF
X
LA
Rotating bezel
Function hand
70
KM.
24
DEN
Second hand
RX
LON
W T
35
FE
45
60
T
24-hour hand
50N
80 RUH
Hour hand
55
PDL
NO
45
Button A
Mode hand
• The illustrations in this instruction manual may differ from the actual appearance
of your watch.
Component identification
Indication
Power reserve level
55
PDL
NO
50
LON
KM.
PAR 70 K
AT
H
O
RI
O
MA
O
NAUT. 35 STAT
30
CHI NYC . 40
T
Day of week
indication
F
10
KHI
W T
S
DAC
11
BJ
S
CHR
12
CHR
7
19 20
2
1
17 18
22
23
24
25
AKL
NOU
TY
O
AL
M
TME
D
SY
16
MDY
15
HN
L
Summer time (DST)
indication
(SMT ON/OFF)
14
OF
F
13
ALM
T
SE
C
AN
• A solar cell is under the dial.
BKK
AL
M
T
SE
ON
X
LA
Alarm indication
(ALM ON/OFF)
ON SMT OFF
TME
DEN
TME
ALM
CHR
SET
S M
90
Mode indication
60
24
B
DX
Area name display
Reception-in-progress
indication (RX)
Reception result indication
(OK/NO)
80 RUH
FEN
45
RX
Date indication
13
Changing the mode
This watch features the four different modes as follows:
TME
Shows ordinary time.
CHR
Mode for using the chronograph.
ALM
Mode for setting the alarm.
55
RX
KM.
LON
PAR 70
PDL
50N and
Mode for setting time
calendar
AT manually.
H
FE
NO
OK
NAUT. 35 STAT.
30
CHI NYC
40
F
10
S
DAC
11
AL
M
T
SE
BJ
S
CHR
12
7
CHR
MDY
AKL
NOU
TY
O
AL
M
19 20 21
17 18
22
23
24
25
HN
L
14
TME
D
SY
16
T
SE
OF
F
13
ALM
15
ON
C
AN
14
KHI
W T
ON SMT OFF
TME
X
LA
A
90
60
The second hand points
to 30 seconds and stops.
DEN
0 1 2
S M
24
B
DX
MA
O
RIO
1 Pull the crown out to position 1 .
T
B
80 RUH
45
BKK
SET
55
PDL
NO
50N
KM.
PAR 70 K
AT
H
O
RIO
45
RX
LON
F
TME
AL
M
BKK
AL
M
CHR
BJ
S
TY
O
16
OF
F
AL
M
D
SY
15
19 20 21
17 18
22
23
24
25
NOU
T
SE
AKL
14
TME
CHR
13
MDY
T
SE
12
T
SE
C
AN
HN
L
TME
AL
M
11
ALM
Mode indication
CHR
S
DAC
7
CHR
NAUT. 35 STAT.
30
CHI NYC
40
10
T
SE
ON
X
LA
A
KHI
W T
ON SMT OFF
TME
DEN
0 1 2
60
90
24
B
DX
MA
O
2 Rotate the crown to change the mode.
S M
T
B
Changing the mode
80 RUH
FE
• Turn the crown so that the mode hand will point to a
marker of the mode indication securely.
3 Push the crown in to position 0 to finish the
procedure.
Indication of the watch changes into that of the mode
selected.
• It may take a moment to change indication.
15
Checking the power reserve
For details of charging, see “Charging your watch” (page 44).
Checking the power reserve
• See page 18 for instructions on how to read power reserve indication.
B
1 Change the mode to [TME] (page 14 ) and push the
crown in to position 0 .
2 Press and release the lower right button A .
0 1 2
A
16
The function hand indicates power reserve and the second
hand indicates the previous reception result.
Checking the power reserve
55
PDL
NO
50N
LON
KM.
PAR 70
OK
AT
H
RIO
W T
MA
O
T
90
NAUT. 35 STAT.
30
CHI NYC
40
S M
B
DX
60
F
W T
ON SMT OFF
F
10
KHI
S
DAC
ON SMT OFF
11
AL
M
T
SE
BJ
S
CHR
12
7
CHR
ALM
13
TY
O
AL
M
OF
F
14
TME
16
T
SE
C
AN
• Press button A to return to normal indication. It returns
HN
D
L to normal indication
automatically in about 10 seconds
SY
MDY
NOU
AKL
without
pressing the button.
15
X
LA
ON
BKK
TME
DEN
19 20 21
17 18
22
23
24
25
A
24
S M
T
0 1 2
Power reserve
indication
80 RUH
FE
45
RX
S
B
Continued on the next page ➡
17
Checking the power reserve
Indication of power reserve in levels
F
F
F
F
F
W T
F
F
W T
1 month - 3 days 3 days or shorter
Power reserve is
getting low.
S
T
T
F
S SM
W T
F
S M
T
Power reserve is
OK.
W T
T W T
T
Power reserve is
sufficient.
S M
W T
W T
7 - 1 month
0
S SM
M
T
T
W T
T W T
T
F
S M
10 - 7 months
OK for normal use.
18
1
S M
W T
T
Meaning
S SM
M
W T
W T
Duration
(approx.)
T
T
Power reserve
indication
2
S M
F
3
S M
F
Level
S M
Insufficient
charge warning
has started.
Charge immediately.
Checking the power reserve
CAUTION
• At the level “0”, the second hand starts to move once every two seconds
(insufficient charge warning function, page 46). The function hand on
the upper right sub dial always indicates the power reserve in this mode. In
addition, functions other than time indication stop and become unavailable.
19
Checking the previous signal reception result
For details of signal reception, see “About signal reception” (page 49).
B
1 Change the mode to [TME] (page 14 ) and push the
crown in to position 0 .
2 Press and release the lower right button A .
The function hand indicates power reserve and the second
hand indicates the previous reception result.
0 1 2
OK
NO
PDL
45
RX
LON
NO
RX
KM. 55
KM.
O
7 O
PAR 70 K
L R 0LONK
PDPA
AT
AT
H
H
50N
FE
RIO
RIO
40
RIO
FE
55
24
60
S M
60
S M
T
24
The reception failed.
T
T
The reception was successful.
20
50N
MA
O
S M
90
60
45
B
DX
S M
T
60
90
24
B
DX
24
NO
RX
KM. 55
KM.
O
7 O
PAR 70 K
L R 0LONK
PDPA
AT
AT
H
H
FE
50N
80 RUH
45
RX
LON
NO
80 RUH
RIO
PDL
80 RUH
FE
55
80 RUH
45
50N
40
NO
MA
O
A
Checking the previous signal reception result
B
• Press button A to return to normal indication. It returns
to normal indication automatically in about 10 seconds
without pressing the button.
0 1 2
A
21
Checking the current world time setting
For details of the world time, see “Setting the world time” (page 24).
B
1 Change the mode to [TME] (page 14 ) and push the
crown in to position 0 .
2 Press and release the upper right button B .
RX
OK
NO
RIO
MA
O
NAUT. 35 STAT.
30
CHI NYC
40
F
10
KHI
W T
S
DAC
ON SMT OFF
11
BJ
S
12
7
CHR
ALM
NOU
TY
O
AL
M
19 20 21
17 18
22
23
24
25
AKL
D
SY
16
MDY
14
TME
15
T
SE
C
AN
OF
F
13
X
LA
CHR
BKK
T
SE
AL
M
DEN
TME
ON
HN
L
22
S M
90
60
B
DX
24
T
A
.
55 LON KM
The second
hand
indicates
the current time zone setting and
PAR 70
50N PDL
AT
H
FE
the function
hand
indicates
the current summer time (DST)
5
4
setting (page 32).
80 RUH
0 1 2
Ex.:
When the time zone setting is
“TYO” and the summer time
(DST) setting is “SMT OFF”
Checking the current world time setting
B
• Press button B to return to normal indication. It returns
to normal indication automatically in about 10 seconds
without pressing the button.
0 1 2
A
23
Setting the world time
This watch can indicate the time around the world according to which of 24 time
zones (offsets from UTC — Coordinated Universal Time) is chosen.
• See page 22 to check which time zone is currently indicated.
B
1 Change the mode to [TME] (page 14 ) and pull the
crown out to position 2 .
RX
.
55 LON KM
The second
hand
indicates
the current time zone setting and
PAR 70
50N PDL
AT
H
FE
the function
hand indicates
the current summer time (DST)
45
setting (page 32).
OK
NO
RIO
MA
O
NAUT. 35 STAT.
30
CHI NYC
40
F
10
KHI
W T
S
DAC
ON SMT OFF
11
BKK
BJ
S
CHR
12
7
CHR
ALM
NOU
TY
O
AL
M
19 20 21
17 18
22
23
24
25
AKL
D
SY
16
TME
14
MDY
15
T
SE
C
AN
OF
F
13
X
LA
ON
T
SE
AL
M
DEN
TME
HN
L
24
S M
90
60
B
DX
24
T
A
80 RUH
0 1 2
Ex.:
When the time zone setting is
“TYO” and the summer time
(DST) setting is “SMT OFF”
Setting the world time
B
0 1 2
A
2 Rotate the crown to select an area.
The hour and minute hands start moving as you finished to
select an area.
• For details of areas and time zones, see “Table of time
zones and representative places” (page 26).
• Pressing button B while the hands stops changes the
summer time (DST) setting.
3 Push the crown in to position 0 to finish the
procedure.
Continued on the next page ➡
25
Setting the world time
Table of time zones and representative places
• Countries or regions may change time zones for various reasons.
• When using the watch in an area not listed in the table, select an area name in the
same time zone.
26
Time zone
Second
hand
Area name
0
+1
+2
+3
+4
+5
+6
+7
+8
0
3
5
8
10
13
15
17
20
LON
PAR
ATH
RUH
DXB
KHI
DAC
BKK
BJS
Representative area
London*
Paris*
Athens*
Riyadh
Dubai
Karachi
Dhaka
Bangkok
Beijing /Hong Kong
Signal station
Germany
◆Germany
◆China
China
Setting the world time
Time zone
Second
hand
Area name
+9
+10
+11
+12
-11
-10
-9
-8
-7
-6
-5
22
25
27
30
33
35
38
40
43
45
47
TYO
SYD
NOU
AKL
MDY
HNL
ANC
LAX
DEN
CHI
NYC
Representative area
Tokyo
Sydney
Noumea
Auckland
Midway
Honolulu
Anchorage**
Los Angeles**
Denver**
Chicago**
New York**
Signal station
Japan
◆Japan
◆USA
USA
Continued on the next page ➡
27
Setting the world time
Time zone
Second
hand
Area name
-4
-3
-2
-1
50
52
55
57
MAO
RIO
FEN
PDL
Representative area
Manaus
Rio de Janeiro
Fernando de Noronha
Azores*
Signal station
◆USA
◆Germany
• The offsets in the table are based on the standard time.
• The areas whose “Signal station” has ◆ mark in the table are out of reception range
and cannot receive its signals.
• For an area with * or **, automatic change of summer time (DST) setting are
linked. For details, see “Setting summer time (DST)” (page 32).
28
Receiving the signal manually (on-demand reception)
For details of signal reception, see “About signal reception” (page 49).
• It may take 2 - 15 minutes to receive time signals.
• Execute “Setting the world time” (page 24) before time signal reception.
• Executing “Setting summer time (DST)” (page 32) previously makes things
smoother in regions utilizing summer time (DST).
Continued on the next page ➡
29
Receiving the signal manually (on-demand reception)
B
1 Change the mode to [TME] (page 14 ) and push the
crown in to position 0 .
2 Press and hold the lower right button A for 2 seconds
A
or more until the second hand points "RX".
The second hand point to "RX" after indicating the previous
reception result and signal reception starts.
55
PDL
NO
50N
KM.
PAR 70 K
AT
H
O
NAUT. 35 STAT.
30
CHI NYC
40
F
10
KHI
W T
S
DAC
ON SMT OFF
11
BJ
S
CHR
12
7
CHR
ALM
NOU
TY
O
AL
M
19 20 21
17 18
22
23
24
25
AKL
D
SY
16
MDY
14
TME
15
T
SE
C
AN
OF
F
13
X
LA
ON
T
SE
AL
M
DEN
TME
HN
L
30
S M
90
60
T
24
B
DX
MA
O
RIO
45
RX
LON
80 RUH
FE
BKK
0 1 2
Receiving the signal manually (on-demand reception)
B
0 1 2
A
3 Put the watch in the place with good conditions for
time signal reception.
• Do not move the watch as far as possible while the second
hand points “RX”.
After the reception finished, the reception result (OK/NO) is
indicated and the watch returns to normal indication.
To cancel signal reception
Pressing button A while the second hand points “RX” cancels signal reception and
the watch returns to normal indication.
31
Setting summer time (DST)
Summer time (DST: Daylight Saving Time) is a system adopted in some countries/
areas to gain an extra daylight during summer.
• In regions utilizing summer time (DST), the time signal includes summer time
(DST) check signal.
• The summer time (DST) period varies depending on the country or area.
• The summer time (DST) rules may change depending on the country or area.
About summer time (DST) setting
• You can set summer time (DST) on or off for each time zone.
• This watch can change summer time (DST)/standard time indication
automatically when it receives time signals including summer time (DST) signals.
• You can also execute summer time (DST) setting manually.
32
Setting summer time (DST)
Checking the summer time (DST) setting
1 Change the mode to [TME] (page 14 ) and push the
B
crown in to position 0 .
2 Press and release the upper right button B .
The second hand indicates the current time zone setting and
the function hand indicates the current summer time (DST)
setting.
55
PDL
NO
50N
RX
LON
KM.
PAR 70 K
AT
H
O
RIO
F
10
KHI
W T
S
DAC
ON SMT OFF
11
BJ
S
CHR
ON SMT OFF
12
NOU
TY
O
AL
M
19 20 21
17 18
22
23
24
25
AKL
D
SY
16
TME
14
MDY
15
T
SE
C
AN
OF
F
13
X
LA
CHR
7
ALM
HN
L
Summer time
(DST) setting
BKK
T
SE
AL
M
DEN
TME
ON
W T
MA
O
T
90
60
B
DX
24
S M
T
NAUT. 35 STAT.
30
CHI NYC
40
S M
80 RUH
FE
45
F
A
S
0 1 2
Continued on the next page ➡
33
Setting summer time (DST)
SMT OFF
0 1 2
A
34
Summer time (DST) is
indicated.
ON SMT OFF
S
ON SMT OFF
S
F
SMT ON
T
B
Standard time is indicated.
• Press button B to return to normal indication. It returns
to normal indication automatically in about 10 seconds
without pressing the button.
Setting summer time (DST)
Changing the summer time (DST) setting
1 Change the mode to [TME] (page 14 ) and pull the
B
crown out to position 2 .
0 1 2
A
The second hand indicates the current time zone setting and
the function hand indicates the current summer time (DST)
setting.
2 Rotate the crown to choose a time zone where you
want to change the summer time (DST) setting.
The time zone changes and the hour and minute hands start
moving.
The summer time (DST) setting of the chosen time zone is
indicated.
Continued on the next page ➡
35
Setting summer time (DST)
B
0 1 2
3 Press and release the upper right button B while the
hands stop.
SMT ON
• Summer time (DST) is indicated.
• Automatic switching of the summer time (DST)
setting is activated. The summer time (DST)
setting is automatically changed corresponding to
reception of summer time (DST) signals.
SMT OFF
• The standard time is indicated.
• Automatic switching of the summer time (DST)
setting is deactivated. Summer time (DST) is not
indicated even after reception of summer time
(DST) signals.
A
• Each time you press button B , the summer time (DST)
setting of the chosen time zone changes alternately.
36
Setting summer time (DST)
B
4 Repeat steps 2 and 3 to execute the summer time (DST)
settings of other time zones.
5 Push the crown in to position 0 to finish the
0 1 2
procedure.
A
Link of summer time (DST) setting
In the following groups of areas, the summer time (DST) setting of all areas in a
group is automatically changed when summer time (DST) signals are received in
an area of the group.
USA
Germany
ANC, LAX, DEN, CHI, NYC
LON, PAR, ATH, PDL
• The link does not work for areas where the automatic switching is turned off.
37
Using the chronograph
The chronograph on this watch can measure up to 60 minutes in 1 second
increments.
B
1 Change the mode to [CHR] (page 14 ) and push the
crown in to position 0 .
0 minute 0 second is indicated.
0 1 2
A
38
2 Start measurement.
• See the next page for the method of measurement.
• Pulling out the crown will stop and reset the chronograph.
3 Change the mode to [TME] and push the crown in to
position 0 to finish the procedure.
Using the chronograph
55
50
50N
FE
LON
70
KM.
PAR 70 K
AT
H
80
O
MA
O
90
90
F
10
KHI
W T
10
NAUT. 35 STAT.
30
CHI NYC
40
Button B : Start/stop
B
DX
60
S M
T
24
S
DAC
ON SMT OFF
BJ
S
TY
O
AL
M
D
SY
15
16
16
24
19 20 21
17 18
22
25
23
24
25
NOU
15
AKL
14
MDY
14
TME
13
T
SE
C
AN
OF
F
13
ALM
HN
L
12
12
7
CHR
CHR
BKK
AL
M
T
SE
X
LA
ON
11
11
TME
DEN
30
RX
RIO
45
Chronograph minute
60
80 RUH
40
PDL
NO
45
35
55
Button A : reset
• Press and release this button to reset the
chronograph after timing.
Chronograph second
19 20 21
17 18
22
23
• After 60 minutes of continuous chronograph operation, the chronograph
automatically stops and is reset.
39
Using alarm
The alarm on this watch is based on the time indicated. It is based on the time
of the time zone newly selected when the time zone setting of the world time is
changed.
Checking alarm setting
1 Change the mode to [ALM] (page 14 ) and push the
B
crown in50to55position70 0 .
RX
PDL
NO
FEN
LON
KM.
PAR
OK
AT
H
NAUT. 35 STAT.
30
CHI NYC
40
90
F
10
KHI
W T
11
BKK
AL
M
NOU
TY
O
AL
M
19 20 21
17 18
22
23
24
25
AKL
D
SY
16
TME
14
MDY
15
T
SE
C
AN
OF
F
13
ALM
C
AN
BJ
S
CHR
Alarm setting
12
CHR
7
X
LA
T
SE
X
LA
ON
ON
ALM
OF
F
S
DAC
ON SMT OFF
HN
L
40
S M
B
DX
60
TME
DEN
A
24
T
0 1 2
MA
O
RIO
80 RUH
The hour, minute and 24-hour hands indicate the alarm time
currently set and the second hand shows the alarm setting.
45
HN
L
Using alarm
B
0 1 2
A
ALM ON
Alarm sounds as the time set comes.
ALM OFF
No alarm sounds.
• Each time you press button B , on/off of the setting
changes alternately.
2 Change the mode to [TME] and push the crown in to
position 0 to finish the procedure.
The hands returns to normal.
Checking the alarm
Pressing button A in step 1 sounds the alarm for 5 seconds. Press the same button
to stop the alarm sound.
Continued on the next page ➡
41
Using alarm
Changing alarm setting
• The alarm time is set in 24-hour basis.
B
0 1 2
A
1 Change the mode to [ALM] (page 14 ) and pull the
crown out to position 2 .
The hour, minute and 24-hour hands indicate the alarm time
currently set and the second hand shows the alarm setting.
2 Rotate the crown to set the alarm time.
• Check AM/PM referring to the 24-hour hand.
• If you rotate the crown quickly a few times, the hand will
move continuously. To stop the rapid movement, rotate the
crown in either direction.
3 Press and release the upper right button B to set the
alarm setting to “ALM ON”.
• Each time you press button B , on/off of the setting
changes alternately.
42
Using alarm
B
4 Change the mode to [TME] and push the crown in to
position 0 to finish the procedure.
The watch returns to normal indication.
0 1 2
A
When the time set comes
Alarm sounds for 15 seconds as the time set comes.
• Alarm does not sound when the position of the crown is not 0 and/or the mode
is not [TME] or [SET].
To stop alarm
Press any of the buttons.
43
Charging your watch
This watch has a solar cell under the dial and stores the power
generated by the cell in its built-in rechargeable cell.
The cell is charged by exposing the dial to light such as direct
sunlight or fluorescent lamps.
For optimal performance, be sure to:
• Put the watch in a location where the dial is exposed to bright
light such as by the window even when it is not used.
• Expose its dial to direct sunlight for 5 or 6 hours at least every
month.
• Do not leave it in dark places for long periods of time.
44
Charging your watch
CAUTION
• Do not charge the watch at a high temperature (about 60°C (140°F) or higher)
as doing so may cause movement malfunction.
• If the watch is obscured from light by long sleeves frequently, supplemental
charging may be needed to ensure continual operation.
• The watch stops charging automatically after finishing (overcharging prevention
function). The function prevents damage to performance of the watch and
rechargeable cell due to overcharging.
Continued on the next page ➡
45
S M
6
T F S
18
T
60
W
Charging your watch
24
OF
When the watch reaches a low charge state (insufficient
charge
30 warning
12
function)
TME LL
E
B
L
M
F
ON
A
OF
F
ON
M
LM
CHR A
L
CH R
T
L-
During the insufficient charge warning state
TM
When the power reserve becomes low, the second hand
moves once every two seconds. This is the insufficient
charge warning function. Be sure to fully charge your M
TM E A
watch immediately as outlined on page 47.
• When the watch is sufficiently charged, the second
hand will move normally.
• If you do not charge the watch for 3 days or longer after the insufficient charge
warning movement has begun, the watch will be depleted of all power and stop.
The time and date are indicated correctly.
• The indication in the [TME] mode is displayed in the other modes and functions
in them are not available.
• The function hand on the upper right sub dial indicates the power reserve level “0”
in this mode.
46
Charging your watch
Charging time by environment
Below are the approximate charging times when exposing to light continuously.
Please use this table as a reference only.
Charging time (approx.)
To start working
To become fully
To work for one normally
when the charged when the cell
day
cell is discharged
is discharged
Environment
Illuminance
(lx)
Outdoors (sunny)
Outdoors (cloudy)
20 cm (7-7/8
inches) away from
a fluorescent lamp
(30W)
Interior lighting
100,000
10,000
3 minutes
2 hours
35 hours
11 minutes
3.5 hours
65 hours
3,000
40 minutes
7.5 hours
−
500
4 hours
50 hours
−
• Exposing to direct sunlight is recommended to charge your watch.
A fluorescent lamp or interior lighting does not have sufficient illumination to
charge the rechargeable cell efficiently.
Continued on the next page ➡
47
Charging your watch
Power save function
The second hand stops automatically to save power when the watch has been kept
in a dark place for a certain period of time and it cannot generate power.
• The watch works normally even while saving power.
• The alarm sounds even while saving power.
• The power save function does not operate under the following conditions:
--The crown is in position 1 or 2 .
--The mode is [CHR] or [ALM].
--During 2-second interval movement (insufficient charge warning status)
Canceling the power save function
The power save status ends and the hands return to normal indication as the watch
is operated or the dial is exposed to light and power generation starts.
48
About signal reception
There are three ways to receive the time signal.
Reception method
Explanation
Automatic reception
The watch receives time signals automatically every night.
On demand reception
You can perform signal reception manually when required.
(page 29)
Recovery automatic
reception
The watch automatically receives time signals when it is charged
enough after it stopped due to insufficient charge.
• Even when this watch receives the signal successfully, the accuracy of the
displayed time will be dependent on the reception environment and internal
processing.
• This watch keeps ±15-second monthly accuracy even if no time signal is received.
Continued on the next page ➡
49
About signal reception
When receiving the time signal
FE
70
KM.
PAR 70 K
AT
H
S M
40
MA
O
S
DAC
BKK
AL
M
BJS
CHR
30
12
12
CHR
7
TY
O
AL
M
15
15
16
16
NOU
D
SY
14
AKL
14
MDY
TME
13
T
SE
19 20 21
17 18
22
C
AN
OFF
13
ALM
25
23
24
25
HN
L
11
11
TME
ON
10
F
60
ON SMT OFF
10
KHI
90
B
T
DX W
24
NAUT. 35 STAT.
CHI NYC
80
O
T
SE
30
RX
LON
RIO
45
60
90
40
50N
80 RUH T
35
55
PDL
NO
X
LA
19 20 21
17 18
22
23
24
50
55
50
45
DEN
Remove the watch and place it on a stable surface
where it can receive the signal better, such as next
to a window.
• When wire glass is used for the window, open it
or change the reception place.
• The reception antenna is located at the 7:00
position of the watch. Place the watch with the 7:00
position facing toward the station.
• Do not move the watch during time signal
reception.
• When the second hand is moving once every two
seconds (during insufficient charge warning),
time signal reception is not executed. Charge the
watch before trying reception.
Position of the antenna
Direction of the station
About signal reception
Note on the time signal
This watch receives time signals from the five signal stations located in four regions
in the world. The receivable signal stations are listed as follows:
Signal stations
Japan
USA
Germany
China
Fukushima station, Japan
Kyushu station, Japan
Fort Collins station, Denver, Colorado
Mainflingen station, Southeast Frankfurt
Shangqiu station, Henan
Kind of the time signal
JJY
WWVB
DCF77
BPC
• Refer to the maps on following pages to see the locations of the signal stations and
their approximate receivable areas.
Continued on the next page ➡
51
About signal reception
JJY
About 2 000 km radius
Kyushu station
JJY
About 1 500 km radius
Fukushima station
52
About signal reception
WWVB
About 3 000 km radius
Fort Collins station
Continued on the next page ➡
53
About signal reception
DCF77
About 1 500 km radius
Mainflingen station
54
BPC
About 1 500 km radius
Shangqiu station, Henan
About signal reception
Poor reception areas
It may be difficult to receive the time signal properly under certain environmental
conditions or in areas susceptible to radio noise.
• Extremely hot or cold
locations
• High-voltage electric
cables, railway overhead
cables, airports
(transmission facilities)
• Inside vehicles
• Inside reinforced concrete
buildings, between tall
buildings, mountains, or
underground
• Electrical appliances and OA
equipment
• Near mobile phones or
smartphones that are in use
55
Adjusting the time and calendar manually
B
1 Change the mode to [SET] (page 14 ) and pull the
crown out to position 2 .
The second hand points to 0 seconds and stops.
0 1 2
A
2 Press and release the lower right button A .
The hour and minute hands move slightly.
3 Press and release the lower right button A
repeatedly to change the hand/indication to be
corrected.
• Each time you press button A , the target changes as
follows:
Hour/minute/24-hour → date → year/month → day of
week → (back to the top)
• The hand or indication slightly moves when selected to
show it becomes adjustable.
56
Adjusting the time and calendar manually
B
0 1 2
A
4. Rotate the crown to adjust the hand/indication.
• The hour, minute and 24-hour hands move synchronously.
• Check AM/PM referring to the 24-hour hand.
• Year and month are indicated with the second hand. Set
them referring to page 58.
• Date indication changes to the next as the function hand
rotates 5 times.
• When you rotate the crown quickly a few times, the hands
and date indication will move continuously. To stop the
rapid movement, rotate the crown in either direction.
5 Repeat steps 3 and 4.
6 Push the crown in to position 0 in accordance with a
reliable time source.
7 Change the mode to [TME] and push the crown in to
position 0 to finish the procedure.
Continued on the next page ➡
57
Adjusting the time and calendar manually
Month and year indications
Set the year and month with the position of the second hand.
“Month” corresponds to one of the 12
zones shown in the figure below.
Each number means month.
1
10
S M
60
3
F
TME L-
TM
CH R
60
ON
L
M
M
TME L-
OF
F
30
ON
A
12
T F S
6
5
T
W
24 4
18
F
T
TME A
OF
L-
S M
LM
CHR A
L
L
6
30
ON
A
58
M
M
7
OFF
OF
ON
M
T F S
6
12
2
T
W
24
18
8
Years since leap year: 0
(Leap year)
Years since leap year: 1
Years since leap year: 2
Years since leap year: 3
12
11
9
“Year” corresponds to the years since
leap year and is indicated with markers
in the zone of each month.
0
1
2
3
Adjusting the time and calendar manually
Year
Years since leap
year
2016 2020 2024 2028 2032
0 (Leap year)
2017 2021 2025 2029 2033
1
1st min. marker
2018 2022 2026 2030 2034
2
2nd min. marker
2019 2023 2027 2031 2035
3
3rd min. marker
55
PDL
NO
50N
KM.
PAR 70 K
AT
H
O
NAUT. 35 STAT.
30
CHI NYC
40
S M
T
60
90
24
B
DX
MA
O
RIO
45
RX
LON
80 RUH
FE
F
10
KHI
W T
S
DAC
ON SMT OFF
11
BJ
S
12
7
CHR
ALM
19 20 21
17 18
22
23
24
25
AKL
NOU
TY
O
AL
M
TME
D
SY
16
MDY
14
HN
L
Ex.:
Position of the second hand when setting April
2018
You can find that the years since leap year of 2018
is "2" from the table and the second hand must be
set to the 2nd minute marker of April zone.
15
T
SE
C
AN
OF
F
13
X
LA
CHR
BKK
T
SE
AL
M
DEN
TME
ON
Second hand
Hour marker
59
Troubleshooting
Checking and correcting the reference position
If the time or calender is not shown correctly even after proper reception of the
time signal, check whether the reference position is correct.
• If the hands and indication do not reflect the correct reference position, the time
and calendar will not be indicated accurately even if the time signal is received.
What is the reference position?
Correct reference positions
50N
RX
LON
KM.
PAR 70 K
AT
H
O
NAUT. 35 STAT.
30
CHI NYC
40
S M
90
60
T
24
B
DX
MA
O
RIO
80 RUH
FE
F
10
KHI
W T
BKK
BJ
S
AL
M
NOU
TY
O
AL
M
19 20 21
17 18
22
23
24
25
AKL
D
SY
16
TME
14
MDY
15
T
SE
C
AN
OF
F
13
ALM
12
CHR
CHR
S
11
31
1
T
SE
X
LA
ON
DAC
ON SMT OFF
TME
HN
L
60
55
PDL
NO
45
DEN
The base position of all hands and calendar to
properly indicate the various functions of this
watch.
• Hour, minute and second hands: 0 hour 00
minute 0 second
• 24-hour hand: “24”
• Date indication: between “31” and “1”
• Function hand: “30” (straight below)
Troubleshooting
B
0 1 2
A
1 Change the mode to [CHR] (page 14 ) and pull the
crown out to position 2 .
The hands and indication move to the current reference
positions stored in memory and stop.
2 Check the reference positions of them referring to the
illustration of the previous pages.
Correct
Push the crown in to position 0 to finish the
procedure. Set the mode to [TME] after that.
Wrong
Proceed to step 3 and correct the reference
position.
3 Press and release the lower right button A .
The function hands move slightly.
Continued on the next page ➡
61
Troubleshooting
B
0 1 2
A
62
4 Press and release the lower right button A
repeatedly to change the hand/indication to be
corrected.
• Each time you press button A , the target changes as
follows.
Function hand/date indication → Hour/minute/24-hour
hands → Second hand → (back to the top)
• The hands and indications slightly move when selected to
show they become adjustable.
• The function hand points “60” (straight above) when the
hour, minute, second and 24-hour hands are the targets of
adjustment.
Troubleshooting
B
0 1 2
A
5 Rotate the crown to adjust the hand/indication.
• The hour, minute and 24-hour hands move synchronously.
• Date indication changes to the next as the function hand
rotates 5 times.
• When you rotate the crown quickly a few times, the hand/
indication will move continuously. To stop the rapid
movement, rotate the crown in either direction.
6 Repeat steps 4 and 5.
7 Push the crown in to position 0 .
8 Change the mode to [TME] to finish the procedure.
63
Troubleshooting
Symptom and Remedies
Symptom
Remedies
Page
Cannot receive time signals
Change the mode to [TME] and push the crown
in to position 0 .
Check power reserve. If the second hand is
moving once every two seconds, you cannot
• Manual reception (on perform time signal reception.
demand reception)
Check the world time setting.
cannot be executed.
• Automatic reception is Check whether the watch is in a receivable area.
not executed.
Check reception environment.
Put the watch in an appropriate place and do not
move it until reception is finished.
Consult an authorized service center.
64
14, 29
16
24
51
55
50
−
Troubleshooting
Symptom
Remedies
Page
Time/calendar is abnormal.
Indication is incorrect
even after successful
reception.
Change the mode to [TME] and push the crown
in to position 0 .
Check the world time setting.
14
24
Check the summer time (DST) setting.
32
Check and correct the reference position.
60
Adjust the time and calendar manually.
56
The summer time (DST)
Change the summer time (DST) setting to “SMT
setting does not change
ON”.
automatically.
Change the mode to [TME] and push the crown
in to position 0 .
Day of week is not
Check power reserve. When the second hand
indicated.
is moving once every two seconds, it is not
indicated.
32
14
16
Continued on the next page ➡
65
Troubleshooting
Symptom
Remedies
Page
Movement of a hand seems strange
66
The hands rotate rapidly
soon after you take the The power save function is canceled. Wait until
the current time is displayed.
watch out of a case or
something similar.
The hands move in an
Check the current mode.
unexpected direction.
Check the current mode.
The second hand does
not move.
Check power reserve.
The second hand moves
Power reserve is low. Charge immediately.
once every two seconds.
14
Change the mode of the watch to [TME], push
The power reserve is not
the crown in to position 0 and press button
indicated.
A.
16
−
14
16
44
Troubleshooting
Symptom
Remedies
Page
Movement of a hand seems strange (continued)
• The world time setting
is not indicated.
• The summer time
(DST) setting is not
indicated.
• No alarm sound is
emitted.
• Alarm sounds at an
incorrect moment.
Change the mode of the watch to [TME], push
the crown in to position 0 and press button
B.
Check power reserve. When the second hand
is moving once every two seconds, it is not
indicated.
Check whether the time and calendar is correct.
Check power reserve. When the second hand is
moving once every two seconds, alarm does not
sound.
Check the alarm setting and the alarm time set.
Check the current mode.
Check the world time setting.
Check the summer time (DST) setting.
22
16
−
16
40
14, 40
24
32
Continued on the next page ➡
67
Troubleshooting
Resetting the watch — All Reset
When the watch does not work properly, you can reset all the settings. If the power
reserve is insufficient, charge the watch first.
Be sure to perform the following operations after All Reset.
1 Correct the reference positions.
After All Reset, the watch is in the reference position adjustment
mode.
Refer to step 3 and after on page 61.
2 Set the world time. (page 24)
3 Adjust the time and calendar.
Adjust the time and calendar manually (page 56) or by receiving
time signals (page 29).
68
Troubleshooting
B
0 1 2
A
1 Change the mode to [CHR] (page 14 ) and pull the
crown out to position 2 .
The hands and indication move to the current reference
positions stored in memory.
• Proceed to the next step when the hands and indication
stop.
2 Press and release both the lower right button A and
upper right button B simultaneously.
As you release the buttons, the alarm sounds and all reset is
executed.
The setting values after All Reset
January 1, Sunday of leap year
Time/calendar
LON
World time
SMT OFF at all time zones
Summer time (DST)
ALM OFF
Alarm setting
0:00 AM
Alarm time
NO
Reception result indication
69
Eco-Drive watch handling precautions
<Always Make Sure to Recharge Frequently>
• For optimal performance, your watch should remain fully charged.
• Long sleeves may inhibit light transmission to your watch.
This may result in your watch loosing charge. In these cases
supplemental charging may be necessary.
• When you take off the watch, place it in a bright location to ensure
optimal performance.
70
Eco-Drive watch handling precautions
CAUTION
Recharging Precautions
• Do not charge the watch at a high temperature (about
60 °C (140 °F) or higher) as doing so may cause the
movement to malfunction.
Examples:
• Charging the watch too close to a light source
which generates a large amount of heat such as an
incandescent lamp or halogen lamp.
* When charging under an incandescent lamp, be
sure to leave 50 cm (20 inches) or more between the
lamp and the watch to avoid exposing the watch to
excessive heat.
• Charging the watch in a location where the temperature
may become extremely high such as on the dashboard
of a vehicle.
71
Eco-Drive watch handling precautions
<Replacement of Rechargeable Cell>
of Rechargeable
Cell> cell that does not require periodical replacement.
•<Replacement
This watch utilizes
a special rechargeable
• This
watch
utilizes
a special rechargeable
cellafter
thatusing
does the
not watch
requirefor
periodical
However
power
consumption
may increase
a numberreplacement.
of years due
However
consumption
after using
theThis
watch
a number
yearsto
due
to wear ofpower
internal
componentsmay
andincrease
deterioration
of oils.
mayforcause
storedofpower
to
of internal
components
and deterioration
of oils.
This may cause
stored
power
to
be wear
depleted
at a faster
rate. For optimal
performance,
we recommend
having
your
watch
be
depleted
at
a
faster
rate.
For
optimal
performance,
we
recommend
having
your
watch
inspected every 2-3 years for proper operation and condition check.
inspected every 2-3 years for proper operation and condition check.
WARNING
WARNING
Handling of Rechargeable Cell
Handling of Rechargeable Cell
• The rechargeable cell should never be removed from the watch.
• The
shouldnecessary
never be removed
the watch. cell from the watch, keep
If forrechargeable
any reason itcell
becomes
to removefrom
the rechargeable
If
it children
becomes to
necessary
remove the
rechargeable cell from the watch, keep
outforofany
the reason
reach of
prevent to
accidental
swallowing.
out
ofrechargeable
the reach of children
to preventswallowed,
accidental swallowing.
If the
cell is accidentally
consult a doctor immediately.
cellrechargeable
is accidentally
consult
a doctor
immediately.
• If
Dothe
notrechargeable
dispose of the
cellswallowed,
with ordinary
garbage.
Please
follow the instructions
• Do
not
dispose
of
the
rechargeable
cell
with
ordinary
garbage.
follow
theorinstructions
of your municipality regarding collection of batteries to
preventPlease
the risk
of fire
of
your municipality
regarding collection of batteries to prevent the risk of fire or
environmental
contamination.
environmental contamination.
72
Eco-Drive watch handling precautions
WARNING
Use Only the Specified Battery
• Never use a battery other than the rechargeable cell specified for use in this watch.
Although the watch structure is designed so that it will not operate when another type of
battery is installed, if a conventional watch battery or other type of battery is installed in
the watch and the watch is recharged, there is the risk of overcharging which may cause the
battery to rupture.
This can cause damage to the watch and injury to the wearer.
When replacing the rechargeable cell, always make sure to use the designated rechargeable
cell.
73
Water resistance
WARNING
Water Resistance
• Refer to the watch dial and/or the case back for the indication of the water resistance of your
watch. The following chart provides examples of use for reference to ensure that your watch is
used properly. (The unit “1bar” is roughly equal to 1 atmosphere.)
• WATER RESIST(ANT) ××bar may also be indicated as W.R.××bar.
Indication
Name
Specification
Minor
exposure
water (wash
face, rain, e
Non water-resistant
NO
WATER RESIST
Water-resistant to 3 atmospheres
OK
W. R. 5 bar
Water-resistant to 5 atmospheres
OK
W. R. 10/20 bar
Water-resistant to 10 or 20
atmospheres
OK
Non water-resistant
—
Everyday use water-resistant
watch
Upgraded everyday use waterresistant watch
74
Dial or Case back
ant
Water resistance
Water-related use
Minor
exposure to
Swimming
water (washing and general
Skin diving,
face, rain, etc.) washing work marine sports
Scuba diving
using an air
tank
Saturation
diving using
helium gas
Operate the
crown or
button when
the watch
is wet
NO
NO
NO
NO
NO
NO
mospheres
OK
NO
NO
NO
NO
NO
mospheres
OK
OK
NO
NO
NO
NO
0 or 20
OK
OK
OK
NO
NO
NO
75
Water resistance
• Non-water resistant models are not designed to come into contact with any moisture. Take
care not to expose a watch with this rating to any type of moisture.
• Water resistance for daily use (to 3 atmospheres) means the watch is water resistant for
occasional accidental splashing.
• Upgraded water-resistance for daily use (to 5 atmospheres) means that the watch may be worn
while swimming, but is not to worn while skin diving.
• Upgraded water-resistance for daily use (to 10/20 atmospheres) means that the watch may be
worn while skin diving, but not while scuba or saturated diving using helium gas.
76
Precautionary items and usage limitations
CAUTION
To Avoid Injury
• Be particularly careful when wearing your watch while holding a small child, to avoid injury.
• Be particularly careful when engaged in strenuous exercise or work, to avoid injury to yourself
and others.
• Do not wear your watch while in a sauna or other location where your watch may become
excessively hot, since there is the risk of burns.
• Be careful when putting on and taking off your watch, since there is a risk of damaging your
fingernails, depending on the manner in which the band is fastened.
• Take off your watch before going to bed.
77
Precautionary items and usage limitations
CAUTION
Precautions
• Always use the watch with the crown pushed in (normal position). If the crown is of the screw
lock-type, make sure it is securely locked.
• Do not operate the crown or any push buttons when the watch is wet. Water may enter the
watch causing damage to vital components.
• If water enters the watch or the watch fogs up and does not clear up even after a long time,
consult your dealer or an authorized service center for inspection and/or repair.
• Even if your watch has a high level of water resistance, please be careful of the following.
- If your watch is immersed in sea water, rinse thoroughly with fresh water and wipe with a
dry cloth.
- Do not pour water from a tap directly onto your watch.
- Take off your watch before taking a bath.
• If seawater enters the watch, place the watch in a box or plastic bag and immediately take it in
for repair. Otherwise, pressure inside the watch will increase, and parts (crystal, crown, push
button, etc.) may come off.
78
Precautionary items and usage limitations
CAUTION
When Wearing Your Watch
<Band>
• Leather bands and rubber (urethane) bands will deteriorate over time due to perspiration dirt.
Because of the natural materials, leather band will be worn, deformed, and discolored over
time. It is recommended to replace the band periodically.
• The durability of a leather band may be affected when wet (fading, peeling of adhesive), owing
to the properties of the material. Moreover, wet leather may cause a rash.
• Do not stain a leather band with substances containing volatile materials, bleach, alcohol
(including cosmetics). Discoloration and premature aging may be occurred. Ultraviolet light
such as direct sunlight may cause discoloration or deformation.
• It is recommended to take off the watch if it gets wet, even if the watch itself is water-resistant.
• Do not wear the band too tightly. Try to leave enough space between the band and your skin
to allow adequate ventilation.
• The rubber (urethane) band may be stained by dyes or soil present in or on clothing or other
accessories. Since these stains may not be removable, caution is required when wearing
your watch with items that tend to easily transfer color (articles of clothing, purses, etc.). In
addition, the band may be deteriorated by solvents or moisture in the air. Replace with a new
one when it has lost elasticity or become cracked.
79
Precautionary items and usage limitations
CAUTION
When Wearing Your Watch (continued)
• Please request adjustment or repair of the band in the following cases:
- You notice an abnormality with the band due to corrosion.
- The pin of the band is protruding.
• We recommend seeking the assistance of an experienced watch technician for sizing of your
watch. If adjustment is not done correctly, the bracelet may unexpectedly become detached
leading to loss of your watch or injury.
Consult an authorized service center.
<Temperature>
• The watch may stop or the function of the watch may be impaired in extremely high or low
temperature. Do not use the watch in places where the temperature is outside the operating
temperature range as stated in the specifications.
<Magnetism>
• Analog quartz watches are powered by a step motor that uses a magnet. Subjecting the watch
to strong magnetism from the outside can cause the motor to operate improperly and prevent
the watch from keeping time accurately.
Do not allow the watch to come into close proximity to magnetic health devices (magnetic
necklaces, magnetic elastic bands, etc.) or the magnets used in the latches of refrigerator
doors, clasps used in handbags, the speaker of a cell phone, electromagnetic cooking devices
and so on.
80
Precautionary items and usage limitations
<Strong Shock>
• Avoid dropping the watch or subjecting it to other strong impact. It may cause malfunctions
and/or performance deterioration as well as damage to the case and bracelet.
<Static Electricity>
• The integrated circuits (IC) used in quartz watches are sensitive to static electricity. Please
note the watch may operate erratically or not at all if exposed to intense static electricity.
<Chemicals, Corrosive Gasses and Mercury>
• If paint thinner, benzene or other solvents or products containing these solvents (including
gasoline, nail-polish remover, cresol, bathroom cleaners and adhesives, water repellent, etc.)
are allowed to come into contact with the watch, they may discolor, dissolve or crack the
materials. Be careful when handling these chemicals. Contact with mercury such as that used
in thermometers may also cause discoloration of the band and case.
<Protective Stickers>
• Be sure to remove any protective stickers that may be on your watch (case back, band, clasp,
etc.). Otherwise, perspiration or moisture may enter the gaps between the protective stickers
and the parts, which may result in a skin rash and/or corrosion of the metal parts.
81
Precautionary items and usage limitations
CAUTION
Always Keep Your Watch Clean
• Rotate the crown while it is pressed in fully and press the buttons periodically so they do not
become stuck due to accumulations of foreign matter.
• The case and band of the watch come into direct contact with the skin. Corrosion of the metal
or accumulated foreign matter may result in black residue coming from the bracelet when
exposed to moisture or perspiration. Be sure to keep your watch clean at all times.
• Be sure to periodically clean the bracelet and case of your watch to remove accumulated
dirt and foreign matter. In rare circumstances, accumulated dirt, foreign matter may cause
irritation with the skin. If you notice this, discontinue wearing the watch and consult your
physician.
• Be sure to periodically clean foreign matter and accumulated materials from the metal band,
synthetic rubber strap (polyurethane) and/or metal case using a soft brush and mild soap. Be
careful not to allow moisture on the case if your watch is not water resistant.
• Leather bands may become discolored by perspiration or dirt. Always keep your leather band
clean by wiping with a dry cloth.
82
Precautionary items and usage limitations
Caring for Your Watch
• Wipe any dirt or moisture such as perspiration from the case and crystal with a soft cloth.
• For metallic, plastic or synthetic rubber (polyurethane) band, clean it with soap and a soft
toothbrush. Be sure to thoroughly rinse the band after cleaning to remove any soap residue.
• For a leather band, wipe off dirt using a dry cloth.
• If you will not be using your watch for an extended period of time, carefully wipe off any
perspiration, dirt or moisture and store in a proper location, avoiding locations subject to
excessively high or low temperatures and high humidity.
<When Luminous Paint is used for your watch>
The paint on the dial and hands helps you with reading the time in a dark place. The
luminous paint stores light (daylight or artificial light) and glows in a dark place.
It is free from any radioactive substance or any other material harmful to a human body or
environment.
• The light emission will appear bright at first and then diminish as time passes.
• The duration of the light (“glow”) will vary depending on the brightness, types of and
distance from a light source, exposure time, and the amount of the paint.
• The paint may not glow and/or may dissipate quickly if exposure to light was not sufficient.
83
Specifications
Model
Timekeeping accuracy
(without reception)
Operating temperature
range
Display functions
Maximum run time from
full charge
Battery
84
E660
Analog solar-powered watch
Type
Average monthly accuracy: ±15 seconds when worn at
normal operating temperatures between +5°C (41°F) and
+35°C (95°F)
‒10°C (14°F) to +60°C (140°F)
• Time: Hours, minutes, seconds, 24-hour
• Calendar: Date, day of week
• After charged fully, the watch runs without additional
charging
-when
power save functions for 4 hours a day (in normal use):
Approximately 10 months
-when
power save functions all the day: Approximately 3 years
• Power reserve upon insufficient charge warning function:
Approximately 3 days
Rechargeable cell (lithium button cell), 1pc.
Specifications
Additional
functions
• Solar power function
• Overcharging prevention
function
• Insufficient charge warning
function (two-second interval
movement)
• Power reserve indication (in four
levels)
• Energy saving function (power
save feature)
• World time (24 time zones by 1
hour)
• Receiving time signal (automatic,
on demand, recovery automatic),
Signal stations: Japan (East/West)/
USA/Germany/China
• Confirming reception status (RX)
• Indicating the result of the last
reception (OK/NO)
• Summer Time (DST) (automatic
SMT ON/OFF, manual SMT
OFF)
• Alarm function (ALM ON/OFF)
• Alarm monitor function
• Chronograph (up to 60 minutes
in one second increments)
• Perpetual calendar (until
February 28th, 2100)
Specifications and contents of this booklet are subject to change without prior notice.
85
European Union directives conformance statement
Hereby, CITIZEN WATCH CO.,LTD. declares that
this product is in compliance with the essential requirements
and other relevant provisions of directive 2014/53/EU and all
other relevant EU directives.
You can find your product’s Declaration of Conformity at
“http://www.citizenwatch-global.com/ ”.
Model No.CB5*
Cal.E660
CTZ-B8197 ①
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement