Silicon Labs C8051F850BLDC-RD Quick Start Guide

Silicon Labs C8051F850BLDC-RD  Quick Start Guide
A. Install Software
Note: This Development Kit includes a Product Serial Number that expands the 2 kB code-limited evaluation version of the Keil
tools to a full version with no code limit. Registration instructions can be found in “AN104: Integrating Keil 8051 Tools into the Silicon Labs IDE”. This Keil tools upgrade process is not required to complete the steps listed in this document.
•
•
•
Development Kit
• MCU Board: MCRD-MCU-C8051F850 with the motor
control firmware preprogrammed into the MCU
• Powertrain Board: MCRD-PWR-NLV-F85X
• BLDC Motor: Turnigy 450 Series 3800 kV Brushless
Outrunner Helicopter Motor
Motor Mount Board
8-bit MCU Kit CD
12 V, 5 A Universal Input Power Adapter
The C8051F850 BLDC Motor Reference Design comes with an MCU board, Powertrain Board, BLDC motor, and all cables and
power supplies needed to evaluate the reference design and develop code.
C8051F8 5 0 BLDC M O T O R R E F E R E N C E D E S I G N Q U I C K-S T A R T G U I D E
EVALUATION BOARD/KIT IMPORTANT NOTICE
Silicon Laboratories Inc. and its affiliated companies ("Silicon Labs") provides the enclosed evaluation board/kit to the user ("User") under the following conditions:
This evaluation board/kit ("EVB/Kit") is intended for use for ENGINEERING DEVELOPMENT, TESTING, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not a finished
end-product fit for general consumer use. ANY OTHER USE, RESALE, OR REDISTRIBUTION FOR ANY OTHER PURPOSE IS STRICTLY PROHIBITED. This EVB/Kit is not intended to
be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end
products that incorporate such semiconductor components or circuit boards. As such, persons handling this EVB/Kit must have electronics training and observe good engineering practice
standards. As a prototype not available for commercial reasons, this EVB/Kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility,
restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.
Should this EVB/Kit not meet the specifications indicated in the User's Guide, the EVB/Kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING
WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SILICON LABS TO USER, IS USER'S SOLE REMEDY, AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, DESIGN, WORKMANSHIP, OR FITNESS FOR ANY PARTICULAR PURPOSE.
User assumes all responsibility and liability for proper and safe handling of the EVB/Kit. Further, User indemnifies Silicon Labs from all claims arising from User's handling or use of the
EVB/Kit. Due to the open construction of the EVB/Kit, it is User's responsibility to take any and all appropriate precautions with regard to electrostatic discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
Neither Silicon Labs nor User is obligated to perform any activities or conduct any business as a consequence of using the EVB/Kit, and neither party is entitled to any form of exclusivity
with respect to the EVB/Kit.
Silicon Labs assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein.
Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide prior to handling the EVB/Kit. This notice contains important safety information
about temperatures and voltages. For additional environmental and/or safety information, please contact a Silicon Labs application engineer or visit www.silabs.com/support/quality.
No license is granted under any patent right or other intellectual property right of Silicon Labs covering or relating to any machine, process, or combination in which the EVB/Kit or any of its
components might be or are used.
User's use of this EVB/Kit is conditioned upon acceptance of the foregoing conditions. If User is unwilling to accept these conditions, User may request a refund and return the EVB/Kit to
Silicon Labs in its original condition, unopened, with the original packaging and all documentation to:
Mailing Address:
400 W. Cesar Chavez
Austin, TX 78701
Copyright © 2013 by Silicon Laboratories
Rev. 0.1 10/13
B. Stand-Alone Operation
C. PC Controlled Operation
D. Additional Support
Where to Find Support
Application Notes:
www.silabs.com/8bit-appnotes
MCU KnowledgeBase:
www.silabs.comSupportKnowledge Base
User’s Forums:
forum.silabs.com
Contact an Applications Engineer:
www.silabs.comSupportContact Technical Support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement