Broadcom HSMS-285x Equivalent Circuit Model User Guide

Broadcom HSMS-285x Equivalent Circuit Model User Guide
HSMS-285x
HSMS-285x Equivalent Circuit Model
parameter units value
Lp (Vbr) nH 2
Cp pF 0.08
Rs ohm 25
Rj ohm (8.33E -5)(1.06)(Temp in Kelvin)
(3E-6 + I bias in A)
Cj pF 0.18
This library of models is being supplied to users as an aid to circuit designs . While it reflects reasonably close similarity to
the actual devices in terms of performance, it is not suggested as a replacement for lab evaluation. Simulation should be
used as a forerunner or a supplement to traditional lab testing.
Users should very carefully note the following factors regarding these models:
•
Model performance in general will reflect typical baseline specs for a given device, and certain aspects of
performance may not be modeled fully.
•
While reasonable care has been taken in their preparation, we cannot be responsible for correct application on any
and all computer systems.
•
For future model improvements, Agilent Technologies reserves the right to change these models without prior
notice.
•
For actual design guidelines, please refer to current data sheet for the device. Only the data sheet provides actual
performance guarantee.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement